Series 172 DPDT Non-Latching Commercial Electromechanical Relay

Full document text

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 1 Series 172 DPDT Non-Latching Commercial Electromechanical Relay 172\092021 SERIES RELAY TYPE 172 DPDT basic relay, non-latching 172D DPDT relay with internal diode for coil transient suppression, non-latching DESCRIPTION The 172 Centigrid® relay is an ultraminiature, hermetically sealed, armature relay for commercial applications. Its low profile height (.280”) and .100” grid spaced terminals, which preclude the need for spreader pads, make it an ideal choice where extreme packaging density and/or close PC board spacing are required. The basic operating concept and internal structure are similar to Teledyne’s DPDT 114 Centigrid® relay. Unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: The 172 feature: • All welded construction. • Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. • High force/mass ratios for resistance to shock and vibration. • Advanced cleaning techniques provide maximum assurance of internal cleanliness. • Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. The Series 172 relay has an internal discrete silicon diode for coil transient suppression. By virtue of its inherently low intercontact capacitance and contact circuit losses, the 172 relay is an excellent submin- iature RF switch for frequencies well into the UHF spectrum. Applications include telecommunications, test instruments, mobile communications, attenuators, and automatic test equipment. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) –65°C to +125°C Vibration (Note 1) 10 g’s to 500 Hz Shock (Note 1) 30 g’s, 6 ms, half sine Enclosure Hermetically sealed Weight 0.15 oz. (4.3g) max. Reflow Temperature 260°C max. temp. 1 min. max INTERNAL CONSTRUCTION INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT LOWER STATIONARY CONTACT UNI-FRAME ARMATURE MOVING CONTACT CENTIGRID® COMMERCIAL RELAYS DPDT Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series 172 DPDT Non-Latching Commercial Electromechanical Relay 172\092021 172 Z M4 - 26 / S Q Relay Series Ground Pin Option (See Appendix A) Pad Option (See Appendix A) Lead Finish Q = Solder-Coated Leads (Sn60/Pb40) R = RoHS Compliant Solder (Sn99.3/Cu0.7) No Suffix = Gold-plated Leads Lead legth S = 0.187” Leads No Suffix = 0.75” Leads Nominal Coil Voltage 26 = 26.5V 12 = 12V 5 = 5V Part Numbering System (Notes 4 & 5) NOTES: 1. Relay contacts will exhibit no chatter in excess of 10 μs or transfer in excess of 1 μs. 2. “Typical” characteristics are based on available data and are best estimates. No on-going verification tests are performed. 3. Unless otherwise specified, parameters are initial values. 4. Unless otherwise specified, relays will be supplied with gold-plated leads. 5. The slash and characters appearing after the slash are not marked on the relay. © 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 3 Series 172 DPDT Non-Latching Commercial Electromechanical Relay 172\092021 BASE PART NUMBERS (172, 172D) 172-5 172D-5 172-12 172D-12 172-26 172D-26 Coil Voltage Nom. 5.0 12.0 26.5 Max. 5.8 16.0 32.0 Coil Resistance (Ohms ±20%) 64 400 1600 Pick-up Voltage (Vdc, Max.) Pulse Operation 3.8 9.0 18.0 Coil Operating Power at Nominal Voltage (mW) 405 360 440 DETAILED ELECTRICAL SPECIFICATIONS (-65 °C to 125 °C unless otherwise noted. See note 3.) TYPICAL DC CONTACT RATING (RESISTIVE) LOADVOLTAGE(VDC) 0 .1 .2 .3 .4 10 20 30 40 50 60 70 .01 0.5 .1 .5 1.0 FREQUENCY (GHz) FIGURE 1 TYPICAL RF PERFORMANCE 1.92 1.22 1.07 1.02 1.01 1.00 1.00 VSWR dB RETURN LOSS (VSWR) ISOLATION ACROSS CONTACTS ISOLATION ACROSS POLES 300 250 200 150 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 LOAD CURRENT (AMPS DC) FIGURE 2 INSERTION LOSS GENERAL NOTES 1. Relay contacts will exhibit no chatter in excess of 10 μsec or transfer in excess of 1 μsec. 2. “Typical” characteristics are based on available data and are best estimates. No on-going verification tests are performed. 3. Unless otherwise specified, parameters are initial values. 4. Relays can be supplied with a spacer pad. See appendix. PERFORMANCE CURVES (Note 2) GENERAL ELECTRICAL SPECIFICATIONS (-65 °C to 125 °C unless otherwise noted. See notes 2 & 3.) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.15 Ω max. Contact Load Rating Resistive: 1 A/ 28 Vdc Inductive: 200 mA/ 28 Vdc (320mH) Lamp: 100 mA / 28 Vdc (320mH) Low level: 10 to 50 μA @ 10 to 50 mV Contact Life Ratings 5,000,000 cycles (typical) at low level 500,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Contact Carry Rating Contact Factory Operate Time 6.0 ms max. @ nominal rated coil voltage Release Time 172: 3.0 ms max. 172D: 6.0 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 1,000 MΩ min. between mutually isolated terminals Dielectric Strength 300 Vrms (60 Hz) @ atmospheric pressure Negative Coil Transient (Vdc) 2.0 Vdc Max. Diode P.I.V. (Vdc) 60 Vdc Min. Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series 172 DPDT Non-Latching Commercial Electromechanical Relay 172\092021 OUTLINE DIMENSIONS SCHEMATIC DIAGRAMS 172 172D (Viewed From Terminals) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) 1 2 3 4 5 6 7 8 34 8 7 6 2 1 5 SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) 1 2 3 4 5 6 7 8 34 8 7 6 2 1 5 TYPICAL DC CONTACT RATING (RESISTIVE) LOADVOLTAGE (VDC) 0 .1 .2 .3 .4 10 20 30 40 50 60 70 .01 0.5 .1 .5 1.0 FREQUENCY (GHz) FIGURE 1 TYPICAL RF PERFORMANCE 1.92 1.22 1.07 1.02 1.01 1.00 1.00 V S W R d B R E T U R N L O S S ( V S W R ) I S O L A T I O N