Reims-Cessna F152 — Maintenance Manual

This document provides detailed instructions for the installation of the Sensenich S72CKS6 propeller on Cessna 152 and Reims Aviation Cessna 152 aircraft. It outlines the necessary steps for removing the existing propeller, installing the new one, and ensuring compliance with weight and balance requirements. Additionally, it includes specific propeller limits that must be displayed in the cockpit following the installation. This manual is intended for maintenance personnel and pilots involved in the propeller installation process, ensuring that all procedures are followed correctly to maintain aircraft safety and performance.

• Propeller installation requires six AN6H-55AS bolts and AN960-616 washers, tightened to 280-300 in-lb.
• The Sensenich 72CK propeller weighs 28.4 lbs at an arm of -36.5 inches.
• Static RPM limits must be between 2100 and 2275 RPM; maximum RPM is 2440 except during takeoff and climb.
• If replacing a McCauley propeller, a weight and balance revision is necessary.
• Propeller diameter must be between 70 and 72 inches.