Standard Rotating Shaft Torque Sensor

Full document text

Standard Rotating Shaft Torque Sensor Model 1104 to 1107 FEATURES • 100 in-lb to 100000 in-lb capacity range • 0.1 % non-linearity and hysteresis • Manual brush lifter (standard) • Speed sensor and/or foot mount options • Lower cost for general “in-line” applications • Can be used with almost all existing dc and ac signal conditioning instrumentation DESCRIPTION A line of rotary slip ring torque sensors primarily designed for a multitude of general test and measurement applications, such as motor testing. Can be used to monitor start up, running, and stall torque levels. Capacity range from 100 in-lb to 100000 in-lb for shaft mounting configurations. 2 Honeywell • Sensing and Control Model 1104 to 1107 PERFORMANCE SPECIFICATIONS Characteristic Measure Torque range 100 lb-in to 3000K lb-in Non-linearity ±0.1 % of rated output Hysteresis ±0.1 % of rated output Repeatability ±0.05 % of rated output Output @ rated capacity ±2 mV/V (nominal) ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 °C to 93 °C [-20 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.002 % of rated output/°F Temperature effect, output ±0.002 % of reading/°F ELECTRICAL SPECIFICATIONS Characteristic Measure Excitation (maximum) 20 Vdc or Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance 350 ohm (nominal) Number of bridges 1 Zero balance ±1.0 % of rated output Electrical termination MS-3102E-14S-5P TYPICAL SYSTEM DIAGRAM Honeywell In-Line Amplifier Output Input Serial Number Power Supply Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC MODEL 1104 Optional Foot Mounts 1104: 25413-1 1105: 25413-2 1106: 25413-3 1107: 25413-4 1108: 25413-5 1109: 25413-6 (Used with unamplified units only) UV UV-10 UBP U3W U2W DV-05 DA-05 DV10 In-Line Amplifiers Amplifier Universal In-Line Amplifiers DIN rail Mount In-Line Amplifiers Output +/-5 VDC +/-10 VDC 0 +/-5 VDC 4-20mA (3 wire) 4-20mA (2 wire) 0 +/- 5 VDC (3 wire) 4-20mA (3 wire) 0 +/- 10 VDC (3 wire) 2003.1 lb. L1 L2 L3 L4 UP DOWN VALUE CLEAR CHAN TARE ENTER SETUP EXIT SC500 SC2000 SC2001 SC3004 GM NK HH 7541 7558 7561-PSD Display Units For long cable runs or electrically noisy environments an amplified sensor or locally mounted amplifier is often preferred Lebow Products MODEL 7541 MENU VIEW TEST TARE HOLD ESC RESET ENTER Mating Connectors & Cables 064-LW13621 Mating connector 064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup 7200-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal) 7200-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal) 7200-111-XX* Mating connector & 6 conductor cable (for connection to instrument 7541) 7200-110-XX**Mating connector & 4 conductor cable (for connection to instrument 7541) 7204-00-XX* Speed sensor cable, pigtail leads at instrument 7204-16-XX* Speed sensor cable to instrument 7541 7220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument 7220-119-XX* Zero velocity speed sensor cable to instrument 7541 * XX represents length in feet 100ft maximum ** XX represents length in feet 20ft maximum Optional Calibration Arm 14086-1 (for 500-2000 in-lbs) 14086-2 (for 50-200 in-lbs) Optional Speed Sensor 24368-2 Zero Velocity Pickup 22236 OR OR Honeywell • Sensing and Control 3 Standard Rotating Shaft Torque Se MECHANICAL SPECIFICATIONS Model lb-in N-m Max speed RPM Overload capacity (% of nominal capacity) Torsional stiffness lb-in/rad Rotating inertia lb-in sec2 Weight (lb) 1104 100 10 9000 150 6430 3.93 x 10-3 11 1104 200 20 9000 150 17000 3.96 x 10-3 11 1104 500 55 9000 150 45200 4.11 x 10-3 11 1104 1000 115 9000 150 103000 4.11 x 10-3 11 1104 2000 225 9000 150 182500 4.14 x 10-3 11 1105 5000 565 8500 150 475000 9.29 x 10-3 28 1105 10000 1130 8500 150 750000 1.06 x 10-2 28 1106 20000 2250 4500 150 2610000 3.93 x 10-2 42 1107 50000 5650 4000 150 7220000 0.14 74 1107 100000 11300 4000 150 12450000 0.15 74 MOUNTING DIMENSIONS Model C cm [in] L cm [in] N cm [in] P cm [in] U cm [in] K cm [in] A cm [in] B cm [in] D cm [in] E cm [in] F cm [in] H cm [in] 1104 (100 lb to 200 lb) 25,40 [10] 14,76 [5.81] 5,32 [2.09] 10,16 [4] 1,91 [0.75] 0,46 sq. [0.18 sq] 12,07 [4.75] 8,89 [3.50] 5,40 [2.13] 5,08 [2.0] 3,49 [1.38] 0,71 [0.28] 1104 (> 200 lb) 25,40 [10] 14,76 [5.81] 5,32 [2.09] 10,16 [4] 2,54 [1.0] 0,64 sq. [0.25 sq.] 12,07 [4.75] 8,89 [3.50] 5,40 [2.13] 5,08 [2.0] 3,49 [1.38] 0,71 [0.28] 1105 32,39 [12.75] 18,42 [7.25] 6,99 [2.75] 11,99 [4.72] 3,81 [1.50] 0,95 sq. [0.38 sq.] 16,51 [6.25] 10,16 [4] 6,35 [2.50] 6,67 [2.63] 3,81 [1.50] 1,03 [0.41] 1106 37,15 [14.63] 17,46 [6.88] 9,84 [3.88] 13,47 [5.50] 5,72 [2.25] 1,27 sq. [0.50 sq.] 18,42 [7.25] 13,34 [5.25] 7,62 [3] 7,62 [3] 5,08 [2] 1,35 [0.53] 1107 48,26 [19] 19,05 [7.5] 14,61 [5.75] 16,51 [6.50] 7,62 [3.0] 1,91 sq. [0.75 sq.] 21,59 [8.50] 13,97 [5.50] 8,89 [3.50] 8,89 [3.50] 5,08 [2] 1,35 [0.53] K OPTIONAL FOOT MOUNT N L B F F C N U DIA. +.0000 -.0005 D P E E A +.000 -.010 H 4 HOLES MANUAL BRUSH LIFTER STANDARD AIR ACTUATED LIFTER OPTIONAL OPTIONAL SPEED SENSOR ATTACH RESTRAINING STRAP WHEN NOT FOOT MOUNTED 1/4-20 UNF. THRU MS-3102E-14S-5P For reference only Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA honeywell.com 008771-2-EN IL50 GLO July 2014 Copyright © 2014 Honeywell International Inc. All rights reserved. Model 1104 to 1107 Standard Rotating Shaft Torque Sensor Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for