LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT
CESSNA 310Q · Parts Catalog
Overview
This service bulletin, MEB-32-01, addresses the replacement of the landing gear warning horn for Cessna Model 310Q and 310R aircraft. The original landing gear warning horn is no longer available, necessitating the installation of a new horn along with an additional bracket. The document outlines the compliance requirements, parts needed, and detailed instructions for the replacement process. It is intended for aircraft owners and maintenance personnel, providing essential information to ensure proper installation and compliance with FAA regulations. The bulletin also includes optional compliance notes, emphasizing that the work can be performed at the owner's discretion.
- The service bulletin applies to Cessna Model 310Q and 310R aircraft.
- The original landing gear warning horn is no longer available and must be replaced with a new horn.
- Compliance with the bulletin is optional and at the owner's discretion.
- Installation requires specific tools and parts, detailed in the bulletin.
- Operational checks must be performed after installation to ensure functionality.
Document
Source
Originally published by cessnaowner.org. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Parts Catalog
- Year
- 2022
- Pages
- 28
- File size
- 3.3 MB
- Publisher
- cessnaowner.org
Common. One of the most common aircraft types we track.
Full essential library on file for the CESSNA 310Q.
CESSNA 310Q for sale now
Free — save the 310Q to your watchlist and track it in one place.
More CESSNA 310Qmanuals & documents
See all 23 →- SERVICE BULLETIN - Plane-Power | AlternatorsService Bulletins
- supplemental type certificate 10084369 - Rosen Sunvisor SystemsSupplemental Type Certificate
- Fuel starvation and forced landing involving Cessna 310R, VH-DAWOther Documents
- MEB-34-05 - SERVICE BULLETINMaintenance Manual
- Flight Test Guide for Certification of Transport Category AirplanesPilot's Operating Handbook
- United States National Search and Rescue SupplementTraining Manual
- Cessna Multi-Engine Service Bulletin MEB-27-02Service Bulletins
- CESSNA 310G - Inflight Pilot TrainingChecklist
- INSTRUCTIONS FOR CONTINUED AIRWORTHINESS Tailcone ...Maintenance Manual
- FAA Approved Installation Manual for the EDM-960 systemWiring Diagram
- Acceptable Methods, Techniques, and Practices – Aircraft AlterationsAdvisory Circular
- Installation Instructions for Cessna 310 . . 400 Series Aircraft Sunvisor System (Kit RC300/400-300-1)Systems Description
If you fly the CESSNA 310Q, you may also be researching these.
In this document
Effectivity
The service bulletin applies to Cessna Model 310Q aircraft with serial numbers 310Q0460 through 310Q1160, and Cessna Model 310R aircraft with serial numbers 310R0001 through 310R2140.
Compliance
Compliance with this service bulletin is optional and can be performed at the discretion of the aircraft owner. However, specific conditions must be met for the work to be recorded in the aircraft log.
Accomplishment Instructions
The document provides step-by-step instructions for removing the original landing gear warning horn and installing the new horn. It includes details on electrical disconnection, hardware removal, and installation of the new bracket and horn.
Material Information
The bulletin lists the necessary parts and their part numbers for each configuration of the installation. It specifies the quantities required and provides instructions for the disposition of old parts.
Operational Checks
After installation, operational checks must be performed to ensure the new landing gear warning horn functions correctly. This includes checking the horn's sound when the landing gear is retracted and the flaps are in the down position.
Safety notes
- Ensure the aircraft is electrically grounded before starting maintenance.
- Disconnect electrical power from the aircraft before performing any work.
Full document text
Multi-engine SERVICE BULLETIN MEB-32-01 TITLE LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT EFFECTIVITY MODEL SERIAL NUMBERS 310Q/T310Q 310Q0460 thru 310Q1160 310R/T310R 310R0001 thru 310R2140 REASON The original landing gear warning horn is no longer available. If the landing gear warning horn needs to be replaced, a new landing gear warning horn is available and will require an additional bracket for installation. DESCRIPTION This service document provides parts and instructions to remove the original landing gear warning horn and install a new landing gear warning horn. NOTE: If the customer would like to replace the stall warning horn in conjunction with the landing gear warning horn, refer to MEB-34-05: Stall Warning Horn Replacement. NOTE: Different configurations may be installed on the aircraft. • CONFIGURATION 1: Aircraft replacing the 9910080-1 Landing Gear Warning Horn and the 9910080-2 Stall Warning Horn. • CONFIGURATION 2: Aircraft replacing only the 9910080-1 Landing Gear Warning Horn. • CONFIGURATION 3: Aircraft that have installed CONFIGURATION 2, from MEB-34-05: Stall Warning Horn Replacement, that have a 9910080-6 Stall Warning Horn, and the 9910080-1 Landing Gear Warning Horn needs to be replaced. NOTE: The removal and installation procedures are the same for all Model 310Q and 310R airplanes. COMPLIANCE OPTIONAL. This service document can be accomplished at the discretion of the owner. A service document published by Textron Aviation may be recorded as completed in an aircraft log only when the following requirements are satisfied: 1) The mechanic must complete all of the instructions in the service document, including the intent therein. 2) The mechanic must correctly use and install all applicable parts supplied with the service document kit. Only with written authorization from Textron Aviation can substitute parts or rebuilt parts be used to replace new parts. 3) The mechanic or airplane owner must use the technical data in the service document only as approved and published. 4) The mechanic or airplane owner must apply the information in the service document only to aircraft serial numbers identified in the Effectivity section of the document. 5) The mechanic or airplane owner must use maintenance practices that are identified as acceptable standard practices in the aviation industry and governmental regulations. MEB-32-01 October 11, 2022 Page 1 of 25 Textron Aviation Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800 This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United States in accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991 COPYRIGHT © 2022 MEB-32-01 Page 2 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 No individual or corporate organization other than Textron Aviation is authorized to make or apply any changes to a Textron Aviation-issued service document or flight manual supplement without prior written consent from Textron Aviation. Textron Aviation is not responsible for the quality of maintenance performed to comply with this document, unless the maintenance is accomplished at a Textron Aviation-owned Service Center. APPROVAL Textron Aviation received FAA approval for the technical data in this publication that changes the airplane type design. FLIGHT CREW OPERATIONS No Changes CONSUMABLE MATERIAL You must use the consumable materials that follow, or their equivalent, to complete this service document. NAME NUMBER MANUFACTURER USE Color Chemical Film Treatment Alodine 1132 Touch n Prep Pen Commercially Available To protect bare aluminum surface. TOOLING No specialized tooling is required to complete this service document. WEIGHT AND BALANCE INFORMATION Negligible REFERENCES Cessna Model 310P thru 310Q (1969-1974) Illustrated Parts Catalog Cessna Model 310P and 310Q (1969-1974) Service Manual Cessna Model 310R and T310R (1975-1981) Maintenance Manual MEB-34-05: Stall Warning Horn Replacement NOTE: To make sure all publications used are complete and current. Refer to www.txtavsupport.com. PUBLICATIONS AFFECTED Cessna Model 310P thru 310Q (1969-1974) Illustrated Parts Catalog Cessna Model 310R (1975-1981) Illustrated Parts Catalog ACCOMPLISHMENT INSTRUCTIONS 1. Prepare the airplane for maintenance. A. Make sure that the airplane is electrically grounded. B. Make sure that all switches are in the OFF/NORM position. C. Disconnect electrical power from the airplane. (1) Disconnect external electrical power. (2) Disconnect the airplane battery. Multi-engine SERVICE BULLETIN MEB-32-01 D. Attach maintenance warning tags to the battery and external power receptacle that have "DO NOT CONNECT ELECTRICAL POWER - MAINTENANCE IN PROGRESS" written on them. NOTE: Use the references that follow for the removal and operational procedures. MODEL 310Q • Cessna Model 310P thru 310Q (1969-1974) Illustrated Parts Catalog, Chapter 24, Electrical Power - Figure 04 - Electrical Equipment Installation. • Cessna Model 310P and 310Q (1969-1974) Service Manual. MODEL 310R • Cessna Model 310R and T310R (1975-1981) Maintenance Manual, Chapter 32, Landing Gear - Position and Warning - Removal/Installation. 2. Gain access as required to get to the 9910080-1 Landing Gear Warning Horn. CONFIGURATION 1 3. (For Model 310Q Refer to Figure 1, Sheet 1, and for Model 310R Figure 2, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the screw and lock washer from the 9910080-1 Landing Gear Warning Horn. B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and discard the screw and lock washer from the 9910080-2 Stall Warning Horn.
Show full textShow less
F. Disconnect and label the electrical wiring from the 9910080-2 Stall Warning Horn. G. Discard all electrical hardware from the 9910080-2 Stall Warning Horn. H. Discard the 9910080-2 Stall Warning Horn. I. Remove and discard the mounting screws from the 5118331-X Channel. J. Discard the 5118331-X Channel. 4. (For Model 310Q Refer to Figure 3, Sheet 1 and 2, and for Model 310R Figure 4, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: NOTE: To install the 9910080-6 Stall Warning Horn, reference CONFIGURATION 1 procedures and parts from MEB-34-05: Stall Warning Horn Replacement. A. (For Model 310Q airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0813005 Plate Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Go to Step 4C. B. (For Model 310R airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0818109 Support Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. C. Install the 5290604-5 Bracket with the two MS35206-244 Screws and the two NAS1149FN816P Washers into the 0813005 Plate Assembly or the 0818109 Support Assembly. D. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-5 Bracket. MEB-32-01 October 11, 2022 Page 3 MEB-32-01 Page 4 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 E. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. F. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. 5. Install the 9910080-6 Stall Warning Horn. (Refer to MEB-34-05: Stall Warning Horn Replacement, CONFIGURATION 1.) 6. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Jack the airplane until all tires are off of the ground. C. Retract the landing gear to the up and locked position. D. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are past the 15 degree position. E. Put the flap lever to the full up position. F. Extend the landing gear to the down and locked position. G. Put the aircraft onto the ground and remove the aircraft jacks. 7. Go to Step 19. CONFIGURATION 2 8. (For Model 310Q Refer to Figure 1, Sheet 1, and for Model 310R Figure 2, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the screw and lock washer from the 9910080-1 Landing Gear Warning Horn. B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and keep the screw and lock washer from the 9910080-2 Stall Warning Horn. NOTE: The kept screw and lock washer will be used during installation. F. Keep the 9910080-2 Stall Warning Horn. NOTE: The kept 9910080-2 Stall Warning Horn will be used during installation . G. Remove and discard the mounting screws from the 5118331-X Channel. H. Discard the 5118331-X Channel. 9. (For Model 310Q Refer to Figure 5, Sheet 1 and 2, and for Model 310R Figure 6, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: A. (For Model 310Q airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0813005 Plate Assembly to the 5290604-3 Bracket. (1) Debur the drilled holes from the 5290604-3 Bracket. Multi-engine SERVICE BULLETIN MEB-32-01 (2) Apply Color Chemical Film Treatment to all bare metal. (3) Go to Step 9C. B. (For Model 310R airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0818109 Support Assembly to the 5290604-3 Bracket. (1) Debur the drilled holes from the 5290604-3 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. C. Install the 5290604-3 Bracket with the two MS35206-244 Screws and the two NAS1149FN816P Washers into the 0813005 Plate Assembly or the 0818109 Support Assembly. D. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-3 Bracket. E. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. F. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. 10. Install the 9910080-2 Stall Warning Horn into the 5290604-3 Bracket with the screw and lock washer. 11. Do the operational check for the stall warning horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Put the avionics power switch to the ON position. C. On the left wing tip, activate the stall vane by pushing the tab up. NOTE: The stall warning horn should produce an audible sound. 12. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Jack the airplane until all tires are off of the ground. B. Retract the landing gear to the up and locked position. C. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are past the 15 degree position. D. Put the flap lever to the full up position. E. Extend the landing gear to the down and locked position. F. Put the aircraft onto the ground and remove the aircraft jacks. 13. Go to Step 19. CONFIGURATION 3 NOTE: Make sure that CONFIGURATION 2 from MEB-34-05: Stall Warning Horn Replacement has been installed. 14. (For Model 310Q Refer to Figure 7, Sheet 1, and for Model 310R Figure 9, Sheet 1.) Remove the 9910080-1 Landing Gear Warning Horn as follows: A. Remove and discard the screw and lock washer from the 9910080-1 Landing Gear Warning Horn. MEB-32-01 October 11, 2022 Page 5 MEB-32-01 Page 6 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 B. Disconnect and label the electrical wiring from the 9910080-1 Landing Gear Warning Horn. C. Discard all electrical hardware from the 9910080-1 Landing Gear Warning Horn. D. Discard the 9910080-1 Landing Gear Warning Horn. E. Remove and keep the 9910080-6 Stall Warning Horn. NOTE: The kept 9910080-6 Stall Warning Horn will be used during installation. F. Remove and keep the two mounting screws and the two washers from the 5290604-3 Bracket. NOTE: The kept mounting screws and washers will be used during installation. G. Discard the 5290604-3 Bracket. 15. (For Model 310Q Refer to Figure 8, Sheet 1 and 2, and for Model 310R Figure 10, Sheet 1 and 2.) Install the 9910080-5 Landing Gear Warning Horn as follows: A. (For Model 310Q airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0813005 Plate Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. (3) Go to Step 15C. B. (For Model 310R airplanes.) Match drill the two Number 11/64 (0.172 inch diameter) holes of the 0818109 Support Assembly to the 5290604-5 Bracket. (1) Debur the drilled holes from the 5290604-5 Bracket. (2) Apply Color Chemical Film Treatment to all bare metal. C. Install the 5290604-5 Bracket with the kept mounting screws and washers into the 0813005 Plate Assembly or the 0818109 Support Assembly. D. Install the 9910080-5 Landing Gear Warning Horn into the 5290604-5 Bracket. E. Install the knurled nut onto the 9910080-5 Landing Gear Warning Horn. NOTE: The plastic knurled nut must be installed with the three indents toward the bracket and horn assembly. On the internal circumference, the smooth side without threads is installed first, towards the bracket and horn. This technique of installation will make sure the nut fully seats against the bracket and not bottom-out on the threads. If not installed correctly the knurled nut will bottom-out on the threads and the horn assembly will not be fully tightened in the bracket. F. Install the labeled electrical wiring, screws, and the two MS35333-37 Lock Washers into the 9910080-5 Landing Gear Warning Horn. NOTE: The screws are supplied with the 9910080-5 Landing Gear Warning Horn. 16. Install the kept 9910080-6 Stall Warning Horn into the 5290604-5 Bracket. 17. Do the operational check for the stall warning horn as follows: A. Remove the maintenance warning tags and connect the airplane battery. B. Put the avionics power switch to the ON position. C. On the left wing tip, activate the stall vane by pushing the tab up. NOTE: The stall warning horn should produce an audible sound. 18. Do the operational check of the 9910080-5 Landing Gear Warning Horn as follows: A. Jack the airplane until all tires are off of the ground. B. Retract the landing gear to the up and locked position. Multi-engine SERVICE BULLETIN MEB-32-01 C. Put the flap lever to the full down position. NOTE: The landing gear warning horn should produce and audible sound once the flaps are past the 15 degree position. D. Put the flap lever to the full up position. E. Extend the landing gear to the down and locked position. F. Put the aircraft onto the ground and remove the aircraft jacks. 19. Put the avionics power switch to the OFF position. 20. Disconnect the airplane battery. 21. Install all access panels and interior that were removed during this bulletin. 22. Make an entry in the airplane logbook that states compliance and method of compliance with this service document. MEB-32-01 October 11, 2022 Page 7 MEB-32-01 Page 8 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 1. 310Q Before Modification (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 2. 310R Before Modification (Sheet 1) MEB-32-01 October 11, 2022 Page 9 MEB-32-01 Page 10 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 3. 310Q Configuration 1 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 3. 310Q Configuration 1 (Sheet 2) MEB-32-01 October 11, 2022 Page 11 MEB-32-01 Page 12 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 4. 310R Configuration 1 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 4. 310R Configuration 1 (Sheet 2) MEB-32-01 October 11, 2022 Page 13 MEB-32-01 Page 14 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 5. 310Q Configuration 2 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 5. 310Q Configuration 2 (Sheet 2) MEB-32-01 October 11, 2022 Page 15 MEB-32-01 Page 16 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 6. 310R Configuration 2 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 6. 310R Configuration 2 (Sheet 2) MEB-32-01 October 11, 2022 Page 17 MEB-32-01 Page 18 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 7. 310Q Before Configuration 3 Modification (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 8. 310Q Configuration 3 (Sheet 1) MEB-32-01 October 11, 2022 Page 19 MEB-32-01 Page 20 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 8. 310Q Configuration 3 (Sheet 2) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 9. 310R Before Configuration 3 Modification (Sheet 1) MEB-32-01 October 11, 2022 Page 21 MEB-32-01 Page 22 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 Figure 10. 310R Configuration 3 (Sheet 1) Multi-engine SERVICE BULLETIN MEB-32-01 Figure 10. 310R Configuration 3 (Sheet 2) MEB-32-01 October 11, 2022 Page 23 MEB-32-01 Page 24 October 11, 2022 Multi-engine SERVICE BULLETIN MEB-32-01 MATERIAL INFORMATION CONFIGURATION 1 order the kit below to install this modification. NOTE: To install the stall warning horn in conjunction with the 9910080-5 Landing Gear Warning Horn, order the kit from MEB-34-05: Stall Warning Horn Replacement. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-01-0 1 Kit, consisting of the following parts: MS35333-37 2 Lock Washer N/A Install MS35206-244 2 Screw MS35206-241 Discard NAS1149FN816P 2 Washer N/A Install 5290604-5 1 Bracket 5118331-X Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-01 1 Instructions CONFIGURATION 2 order the kit below to install this modification. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-01-1 1 Kit, consisting of the following parts: MS35206-244 2 Screw MS35206-241 Discard MS35333-37 2 Lock Washer N/A Install NAS1149FN816P 2 Washer N/A Install 5290604-3 1 Bracket 5118331-X Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-01 1 Instructions CONFIGURATION 3 order the kit below to install this modification. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION MEB-32-01-2 1 Kit, consisting of the following parts: MS35333-37 2 Lock Washer N/A Install 5290604-5 1 Bracket 5290604-3 Discard 9910080-5 1 Landing Gear Warning Horn 9910080-1 Discard MEB-32-01 1 Instructions Multi-engine SERVICE BULLETIN MEB-32-01 Based on availability and lead times, parts may require advanced scheduling. * Please contact a Textron Aviation Authorized Service Facility for current cost and availability of parts listed in this service document. MEB-32-01 October 11, 2022 Page 25 Multi-engine OWNER ADVISORY MEB-32-01 TITLE LANDING GEAR - LANDING GEAR WARNING HORN REPLACEMENT TO: Cessna Model 310Q and 310R Aircraft Owner REASON The original landing gear warning horn is no longer available. If the landing gear warning horn needs to be replaced, a new landing gear warning horn is available and will require an additional bracket for installation. COMPLIANCE OPTIONAL. This service document can be accomplished at the discretion of the owner. LABOR HOURS For planning purposes only: WORK PHASE LABOR-HOURS Modification As Required Test and Inspection As Required MATERIAL AVAILABILITY PART NUMBER AVAILABILITY COST MEB-32-01-0 * * MEB-32-01-1 * * MEB-32-01-2 * * * Please contact a Textron Aviation Authorized Service Facility for current cost and availability of parts listed in this service document. Based on availability and lead times, parts may require advanced scheduling. WARRANTY None NOTE: As a convenience, service documents are now available online to all our customers through a simple, free-of-charge registration process. If you would like to sign up, please visit the Customer Access link at www.txtavsupport.com to register. MEB-32-01 October 11, 2022 Page 1 of 1 Textron Aviation Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800 This document contains technical data and is subject to U.S. export regulations. This information has been exported from the United States in accordance with export administration regulations. Diversion contrary to U.S. law is prohibited. ECCN: 9E991 COPYRIGHT © 2022
What's in the CESSNA 310Q TCDS
A Type Certificate Data Sheet (TCDS) is the FAA's record of what an aircraft type was approved as. It is the source of truth for weights, seating, fuel and the rules the design was certified against. Expand any line to see what it means.
6,038 CESSNA 310Q parts for sale
See all →
Parts listed for sale by vetted eBay sellers — confirmed on eBay at checkout.