PRODUCTS & SERVICES CATALOG

When sewn into the dress cover, seats appear smooth and wrinkle-free. Decorative quilting and other techniques are especially user-friendly due to its ability to stretch. DAX SP with Jersey Scrim BENEFITS • Enables easy dress cover application • Has shown to improve flammability performance • Superior Firehard properties • Retains comfort and durability characteristics *WHEN CONSTRUCTED USING APPROVED COVERING MATERIALS YARN COMPOSITION Polyester FABRIC WEIGHT 9.83 oly/5.28 osy/178.9 gsm THICKNESS 0.024” RESISTANCE 120,000 dry rubs JERSEY SCRIM TECHNICAL DATA SHEET DAX SP with JerseyScrim DAX SP Foam with FireGuard Scrim DAX Foam with FireGuard Scrim gives passengers all the quality and comfort they expect from Skandia but now with VASTLY SUPERIOR fire protection. When sewn into the dress cover, seats appear smooth and wrinkle-free Decorative quilting and other techniques are especially user-friendly due to its ability to stretch. DAX SP Foam with FireGuard Scrim BENEFITS • Vastly superior fire resistance and comfort • Four-way stretch fire protective fabric • Laminated materials means reduced material processing • Maximum Durability TECHNICAL DATA SHEET DAX SP Foam with FireGuard Scrim DAX 20 SP W/ Fireguard Scrim DAX 20 SP W/ Fireguard Scrim DAX 26 SP W/ Fireguard Scrim DAX 26 SP W/ Fireguard Scrim DAX 47 SP W/ Fireguard Scrim DAX 47 SP W/ Fireguard Scrim DAX 55 SP W/ Fireguard Scrim Thickness .25” .50” .25” .50” .25” .50” .25” Weight (oz/yd2 ) 17.9 30.0 17.4 25.0 18.6 29.4 17.8 ILD (Indention Load Deflection on 4” Thickness) 25% Support Factor 65/25 15-25 4.0 min 15-25 4.0 min 20-30 2.7 min 20-30 2.7 min 40-50 2.5min 40-50 2.5min 50-60 2.6 min FLAMMABILITY California Technical Bulletin 117 PASS PASS PASS PASS PASS PASS PASS 14 CFR 25.853(a) 12-Second Vert. PASS PASS PASS PASS PASS PASS PASS 14 CFR25.853(c) Oil Burn Test* PASS PASS PASS PASS PASS PASS PASS FMVSS302 PASS PASS PASS PASS PASS PASS PASS FireGuard YARN COMPOSITION Proprietary blend of high-performance fibers FABRIC WEIGHT 6.04 oz/sq yd THICKNESS 0.054” *WHEN CONSTRUCTED USING APPROVED COVERING MATERIALS HR Polyfoam Comfortable HR Foams in seven levels of firmness. Demonstration of Compliance with Material Flammability Requirements per 14 CFR 25.853(a) Amendment 25-116 Appendix F Part I(a)(1)(ii). BENEFITS • In Stock, Can Ship Same Day! • Wide Variety of Densities • Custom Sizes and Fabrication Available HR Polyfoam HR2444 HR70 HR30 HR55 TECHNICAL DATA SHEET HR Poly Foam HR30 HR2444 HR55 HR70 DENSITY (pcf) 2.60 2.40 2.80 3.20 ± 0.10 ± 0.10 ± 0.10 ± 0.20 *ILD (lbs.) (Indentation Load Deflection on 4” (Thickness) 25% 32-38 40-48 51-59 69-79 65% 65-86 105-120 120-156 165-190 SUPPORT FACTOR 2.6 2.6 2.4 2.4 **RESILIENCE (% Rebound) 59-66 57-66 57-63 50-60 TEAR RESISTANCE (lb/in) 1.0-2.0 1.0-2.0 1.0-2.0 1.0-2.0 FLAMMABILITY California Technical Bulletin 117 PASS PASS PASS PASS 14 CFR 25.853(a) 12 Second Vertical PASS PASS PASS PASS AeroLite Resistant to Compression Set Excellent Absorption AeroLite Foams AL 70 • AL 73 • AL 76 AeroLite cellular foams are excellent for headliner and trim panel applications and also provide acoustic absorption. They combine superior compression set resistance at a variety of firmness while creating a quieter cabin environment. Available in 0.125" and 0.25" thickness BENEFITS • Highly Resistant to Compression Set • Excellent Acoustical Performance • Color-coded to identify firmness • Soft, Medium, and Firm Grades • Sandable AeroBlanket AL 70 • AL 73 • AL 76 AeroLite Headliners • Sidewalls Bulkheads • Seat Shrouds • Carpet Pad TECHNICAL DATA SHEET Typical physical properTies AL70 AL73 AL76 roll sizes 54" x 25' 54" x 25' 54" x 25' 54" x 50' 54" x 50' 54" x 50' Thickness .125", 0.25" .125", 0.25" .125", 0.25" color Charcoal Beige Light Grey Feel/Touch Soft Medium Firm 25% compression DeFlecTion Force (psi) asTm D1056 (TYP) 5.9 7.5 13.8 50% Compression seT (%) asTm D1056 4.9 9.3 15.1 DensiTy (pcF) asTm D1056 8.8 -1.0/+2.0 9.5 -1.0/+2.0 9.4 -1.0/+2.0 Tensile (psi) asTm D3574 59.1 70.1 98.0 elongaTion (%) ASTM D3574 105 95 70 FlammabiliTy 14 CFR 25.853(a) 12-Sec Vert Passes Passes Passes PLEASE READ PRIOR TO INSTALLATION AeroLite The open cell structure of AeroLite provides EXCELLENT RESISTANCE TO COMPRESSION SET Please use care when installing as AeroLite IS MORE SUSCEPTIBLE TO TEARING THAN ENSOLITES. Excellent Acoustic Absorption at High Frequency Good Sandable Qualities Excellent Resistance to Compression Set Please contact Skandia if you have any questions and we will be happy to assist you. Skandia, Inc. • 800.945.7135 • 815.393.4600 • Info@SkandiaInc.com Service Temperature -40 to 250 degrees F Ensolite Ensolite Closed Cell Foams CLOSED CELL FOAMS • Typical Uses Include: Headliner, Sidewall, Carpet Pad, Armrest • Stock Sizes include: 1/8" • 1/4" • 1/2" • Additional Sizes Upon Request MC MLC SK-F6231 R - 3 1 0 V R E P L AC E M E N T ALC SKIV1 SKIV3 LD45FR SKAHC DOES NOT PASS: ALC.06 SKIV1.06 SKIV3.06 SKIV3.125 SKAHC.06 SKAHC.125 SKAHC.25 SKF6231.125 Ensolite Closed Cell Foams TECHNICAL DATA SHEET ALC MC SKIV1 SKIV3 MLC SKAHC SK-F6231 LD45FR 56" x 75' 56" x 25' 54" x 25' 54" x 25' 56" x 10' 56" x 48' 42" x 54" 40" x 80" .06" * .125" .06" * .06" * .125" .06" * .06" * .125" .125" .25" .125" .125" .25" * .125" * .125" * .25" .25" .50" .25" .25" .40" .25" * .25" * .50" .50" .375" .375" 1.00" .50" 1.00 .50" .50" .75" 1.00" .75" 1.00" 1.00 Beige Beige Black Black Black Light Grey Beige Charcoal 4.0–6.0 1.5-3.0 2.0-5.0 9.0-13.0 2.0-3.5 7.0-9.0 4.0-8.0 2.0-5.0 25 30 40 40 30 30 25 11 6.0–8.5 3.5-5.0 3.0-5.5 7.0-9.5 3.5-5.0 6.5-8.5 5.0-9.0 2.8 90 30 50 100 30 90 80 82 125 125 100 100 150 100 200 150 Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass Pass STYLE Roll Size Thicknesses Color 25% Compression Deflection Force (psi) ASTM D1056 †50% Compression Set (%) ASTM D1056 Density (pcf) Tensile (psi) Elongation (%) FLAMMABILITY 14 C FR 25.853(a) 12-Second Vertical MVSS302 * DOES NOT PASS FLAMMABIILITY REQUIREMENTS. ** PASSES 14 CFR 23.853( a) HORIZONTAL ONLY. † NOTE: THE LOWER THE NUMBER, THE HIGHER THE RESISTANCE TO COMPRESSION SET. FOR BETTER PERFORMANCE, COMPARE TO SKANDIA'S AEROLITE PRODUCT LINE. _____________________________________________________________________________________ Typical physical properTies roll size 54" x 20' Thicknesses .125", .25" color B lack WaTer aBsorpTion (%) asTm d1056 10 25% compression deflecTion force ( psi) asTm d1056 2.0—5.0 densiTy ( pcf) asTm d1056 3.0—6.0 Tensile ( psi) asTm d412 40 elongaTion (%) asTm d412 100 flammaBiliTy 12 second V erTical 14 cfr 25.853( a) pass smoke densiTy 14 cfr 25.853( d) pass heaT release 14 cfr 25.853( d) pass fmVss-302 pass Ul94 hf-1 lisTed Ul94 V0, 5Va lisTed SK-OSU Closed Cell Heat Release Foam sk-osU closed cell foam AeroCell Foam SK-13000 • SK-13200 • SK-13200PSA AeroCell is a very lightweight, open cell melamine foam which has exceptional sound absorption properties. AeroCell exhibits very good thermal properties and contains no fibers. AeroCell is provided in sheets in a variety of thicknesses. This foam can also be custom cut to suit specific acoustical or thermal require- ments. BENEFITS • Radiant Panel Certified • Excellent High Frequency Sound Absorption • Lightweight • Excellent Thermal Insulation Properties • OSU Certified • Water-Repellent (SK-13200 series only) • Can be Used to Reduce Weight in Seats AeroCell Foam High Performance Absorption and Insulation, Radiant Panel Certified AeroBlanketAeroCell Foam High Performance Absorption and Insulation, Radiant Panel Certified TECHNICAL DATA SHEET SK-13000 • SK-13200 • SK-13200PSA Open Cell Foam Typical physical properTies sK-13000 sK-13200 sK-13200psa* DensiTy asTM D3574 0.62 pcf 0.63 pcf 0.63 pcf sheeT size 24" x 48" 23" x 46" 23" x 46" ThicKness 0.25" 0.125", 0.25" 0.125" 0.50" 0.50" 0.25" 1.00" 1.00" 0.50" 2.00" 2.00" color Grey Grey Grey FlaMMabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes Passes Passes 14 CFR 25.853(a) 60-Second Vertical Passes Passes Passes 14 CFR 25.853(d) OSU Passes ---------- ---------- 14 CFR 25.856(a) Radiant Panel Passes Passes Passes TherMal conDucTiviTy asTM c518 .30 BTU in/hr/ft2/oF@77oF .23 BTU in/hr/ft2/oF@50oF .26 BTU in/hr/ft2/oF@75oF Tensile sTrengTh asTM D3574 8 psi 15 psi 15 psi elongaTion asTM D3574 8% 39% nominal 39% nominal WaTer repellency ---------- 35% average weight gain, max 35% average weight gain, max aDDiTional T esTs Boeing BSS 7239, Toxic Gas Generation Passes Passes UL181, Microbial Growth Passes Passes Passes ASTM G21, Fungus Resistance Passes Passes Passes SK-13200 Absorption Coefficient *AeroCell Foam with PSA must be tested in composite to meet flammability certification requirements. CF45AC SHEET STOCK TOLERANCE SPECIFICATIONS Width (all) ± 0.30” Length ≤ 24” ± 0.30” > 24” ± 0.50” Thickness 0.50” ± 0.0625” 1.00” ± 0.10” 2.00” ± 0.20” CF40AC CF42AC CF47AC Confor Foam With excellent energy absorption characteristics, Confor foams offer a range of impact protection and isolation for dynamic loads while maintaining consistent static load performance. Confor Foam Comfort/Inpact Foams BENEFITS • In Stock, Can Ship Same Day! • Excellent Engergy Absorption • Superior Comfort • Color-coded for Ease of Identification Confor foams unique combination of slow re- covery and high energy absorption allows the material to offer effective damping and vibrations isolation. This means less fatigue for occupational seating and increased comfort. DENSITY (lb/ft3) ASTM D3574 FLAMMABILITY FMVSS 302 14 CFR 25.853(a) 12 Second Vertical UL94 RATING @ (min 0.25 in) California Flame 117 BALL REBOUND (%) ASTM D3574 THERMAL CONDUCTIVITY - K VALUE ASTM C177 W/m*K (BTU-in/hr-ft2 F) INDENTATION FORCE DEFLECTION N(lbf ) ASTM D3574 Test B1 Modified 25% Deflection for 12”x12”x2”, 22C (72F) @ 50% relative humidity COMPRESSION LOAD DEFLECTION (psi) ASTM D3574C *Modified *12.7mm thick specimen compressed at a rate of 5.1 mm/min Force @ 10% Compression kPa Force @ 20% Compression kPa Force @ 30% Compression kPa Force @ 40% Compression kPa Force @ 50% Compression kPa Force @ 60% Compression kPa Force @ 70% Compression kPa Force @ 80% Compression kPa TENSILE STRENGTH kPa (psi) ASTM D3574 @ 20 in/min 72F TEAR STRENGTH kN/m (psi) ASTM D3574, 51 cm/min (20 in/min) @ 22C(72F) COMPRESSION SET (%) Compressed 50% 22 hr at 22C (72F) RoHS Compliant CF40AC CF42AC CF45AC CF47AC 96 (6.0) 96 (6.0) 96 (6.0) 96 (6.0) PASS PASS Listed HBF PASS PASS Listed HBF PASS PASS Listed HBF PASS PASS Listed HBF 1 1.3 1.9 2.2 0.040 (0.28) 0.040 (0.28) 0.040 (0.28) 0.040 (0.28) 97 (22) 155 (35) 213 (48) 280 (63) 1.5 (0.21) 2.0 (0.28) 2.3 (0.33) 2.6 (0.38) 3.2 (0.47) 4.4 (0.63) 7.5 (1.1) 20 (2.9) 2.2 (0.31) 2.9 (0.42) 3.2 (0.47) 3.7 (0.54) 4.4 (0.64) 5.9 (0.85) 9.8 (1.4) 25 (3.6) 3.9 (0.57) 5.0 (0.72) 5.3 (0.76) 5.9 (0.85) 7.0 (1.0) 9.1 (1.3) 15 (2.1) 36 (5.3) 4.8 (0.69) 6.9 (1.0) 7.2 (1.0) 7.9 (1.1) 9.3 (1.3) 12 (1.7) 20 (2.8) 49 (7.1) 51 (7.4) 83 (12) 145 (21) 193 (28) 0.29 (1.7) 0.45 (2.6) 0.73 (4.2) 098 (5.6) <1 <1 <1 <1 YES YES YES YES TECHNICAL DATA SHEET Confor Foam Comfort/Impact Foams EthaFoam PolyEthylene Foam ETHAFOAM PolyEthylene Foam TECHNICAL DATA SHEET T ypical physical properTies eTha41012.0 DensiTy ASTM D3575 2.2 pcf sheeT size 2" x 24" x 36" compression seT ASTM D3575 <20% compression DeflecTion ASTM D3575 @10% 8 psi @25% 10 psi @50% 20 psi T ensile sTrengTh ASTM D3575 35 psi T ensile elongaTion ASTM D3575 60% T ear sTrengTh ASTM D3575 10 lbs/in T hermal sTabiliTy ASTM D3575 <1% T hermal conDucTiviTy ASTM D3575 BTU•in/hr•ft2•oF @75%oF 0.42 @23%oF 0.37 WaTer absorpTion ASTM D3575 0.3 lbs/ft2 buoyancy ASTM D3575 58 pcf flammabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes ABD 031 Passes Highly Buoyant; Used in Flotation Cushions Lightweight, Strong, Resilient, and Durable Ideally Suited as Component Material *When tested with other Radiant Panel compliant materials per FAA Advisory Circular AC-25.856-1 paragraph 5C. Hook & Loop Radiant Panel Certified* Pressure Sensitive Adhesive Hook & Loop Fastener Benefits The Pressure Sensitive Adhesive Hook & Loop fastener can be used for quick attach/detach applications that require compliance with the Radiant Panel Certification test for thermal/acoustic insulation. Its improved fire-retardancy helps to reduce the risk of failure in oil burn test results for Part 25 seat cushions. typical physical properties roll sizes 1" x 50 yards, 2" x 50 yards color Beige flammaBility 14 CFR 25.853(a) 12-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes* BMS 8-372 Passes FMVSS-302 Passes typical shear Value initial after 100 cycles in pounds per square inch 10.6 8.1 typical peel Value initial after 100 cycles in pounds per inch width 1.1 0.8 typical tension strength initial after 100 cycles in pounds per square inch 7.3 4.6 psa properties temperature range –30o to 200of (–34o to 93oc) shelf life One year from manufacturing date, when stored in original packaging at 70oF(21oC), 50% relative humidity. TECHNICAL DATA SHEET PRPBGE1.00H + PRPBGE1.00L + PRPBGE2.00H + PRPBGE2.00L *When tested with other Radiant Panel compliant materials per FAA Advisory Circular AC-25.856-1 paragraph 5C. Hook & Loop Radiant Panel Certified* SRPBGE1.00H + SRPBGE1.00L + SRPBGE2.00H + SRPBGE2.00L Sew-On Hook & Loop Fastener Benefits The sew-on Hook & Loop fastener can be used for quick attach/detach applications that re- quire compliance with the Radiant Panel Certification test for thermal/acoustic insulation. Its improved fire-retardancy helps to reduce the risk of failure in oil burn test results for Part 25 seat cushions. typical physical properties roll sizes 1" x 50 yards, 2" x 50 yards color Beige flammaBility 14 CFR 25.853(a) 12-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes* BMS 8-372 Passes FMVSS-302 Passes typical shear Value initial after 100 cycles in pounds per square inch 10.6 8.1 typical peel Value initial after 100 cycles in pounds per inch width 1.1 0.8 typical tension strength initial after 100 cycles in pounds per square inch 7.3 4.6 TECHNICAL DATA SHEET Hook & Loop Fasteners HOOK & LOOP SHEAR STRENGTH(P.S.I.) HOOK LOOP MUSHROOM Initial 17.5 lbs. 12.0 lbs. 45 lbs. After Cycles 15.3 lbs.(10,000) 10.0 lbs.(5,000) 12 lbs.(100) TENSION STRENGTH(P.S.I.) HOOK LOOP MUSHROOM Initial 6.3 lbs. 6.2 lbs. 7.5 lbs. After Cycles 5.8 lbs.(10,000) 4.3 lbs.(5,000) 2.0 lbs.(100) PEEL STRENGTH(P.I.W.) HOOK LOOP MUSHROOM Initial 1.4 lbs. 2.4 lbs. 3.2 lbs. After Cycles 1.3 lbs.(10,000) 1.1 lbs.(5,000) 1.2 lbs.(100) CERTIFICATIONS All prices include demonstration of compliance with material flammability requirements: 14 CFR 25.853(a) Pass Pass Pass MIL-Spec AA55126B Pass Pass FMVSS 302 Pass Pass BMS-8-372 Meets Meets Meets AeroBlanket HOOK & LOOP FASTENERS HOOK & LOOP TECHNICAL DATA SHEET SEW-ON HOOK & LOOP Beige or Black, 50 Yard Rolls, Tested to alternate burn method of 12 sec per FAA PS-ANM-25.853-01, at 60-Second BEIGE: HOOK / LOOP ITEM # BLACK: HOOK / LOOP ITEM # SIZE SABGE1.00H / SABGE1.00L SABLK1.00H / SABLK1.00L 1” SABGE2.00H / SABGE2.00L SABLK2.00H / SABLK2.00L 2” Weight oz/yd2 Density lbs/ft3 Weight oz/yd2 Density lbs/ft3 1" HOOK 7.99 7.901 1" LOOP 9.47 7.216 2" HOOK 8.96 9.028 2" LOOP 9.88 7.672 PSA HOOK & LOOP Beige or Black, 25 Yard Rolls, PSA materials are applied to 0.025" aluminum when tested to show compliance to 25.853(a), 12-Second BEIGE: HOOK / LOOP ITEM # BLACK: HOOK / LOOP ITEM # SIZE PBGE1.00H / PBGE1.00L PBLK1.00H / PBLK1.00L 1” PBGE2.00H / PBGE2.00L PBLK2.00H / PBLK2.00L 2” MUSHROOM HEAD HOOK Black, 50 Yard Rolls, Sew Only with Scrim Backing (self- adhesive not available), Fastens to any other Skandia Loop, Passes 14 CFR 25.853(a) 12-Second Vertical ITEM # TYPE SIZE OVERALL WIDTH BLK1.0 MUSHRM SEW 1" 2" BLK1.5 MUSHRM SEW 1.50" 3" HOOK & LOOP XTRA WITH SCRIM BACK FASTENER XTRA Wide, XTRA Surface Area, XTRA Secure Bond, Works with Contact Adhesive, works where PSA does not, Beige, 50 Yard Rolls, Sew Only ITEM # TYPE SIZE OVERALL WIDTH BGE1.00HS HOOK 1" 2" BGE1.00LS LOOP 1" 2" BGE2.00HS HOOK 2" 3" BGE2.00LS LOOP 2" 3" Guardian Upholstery Batting Guardian Batting Skandia’s unique manufacturing process means that fibers are interlocked to provide flawless, consistent performance Improved fire-retardancy in Oil Burn Testing So advanced it can be certified to 14 CFR 25.856(a) Radiant Panel BENEFITS • In Stock, Can Ship Same Day! • Unequaled fireblock performance • Enhanced seating comfort PHYSICAL SPECIFICATIONS WIDTH 40" LENGTH 20 yards WEIGHT 8 oz/yd2 THICKNESS .375" loft COLOR Charcoal AeroLite Foam Soundproofing Solutions DAX Foam Fabricated Cushions Upholstery Supplies AeroLite Carpet Pad Flammability Testing & Certification Making Aircraft Quieter, Safer, and More Comfortable • Aircraft industry standard fireblocking fabric for full encapsulation of polyfoam cushions to meet 14 CFR 25.853 fireblocking requirements • Non-woven needled Aramid batt with Aramid scrim • Weight = 8.5 oz./sq. yd. • Thickness = 0.104—0.138" • Width = 60" • Passes 14 CFR 25.853(a) 12-Second Vertical • Free of Formaldehyde and Formaldehyde-based fibers • 50 Yard Rolls • Aircraft industry standard fireblocking fabric for full encapsulation of polyfoam cushions to meet 14 CFR 25.853 fireblocking requirements • Basofil - 38%, Aramid - 52%, PBI - 10% • Weight = 6.4—7.4 oz./sq. yd. • Thickness = 0.048—0.068" • Width = 60" • Supported Construction • Passes 14 CFR 25.853(a) 12-Second Vertical • Scrim—100% Nomex fiber content • 50 Yard Rolls • FlameStop is a flexible flame barrier used underneath marginally performing dress cover materials. Its unique knitted construction with two- way stretch allows it to be glued directly to the foam without compromising cushion comfort. • 100% Nomex • Weight = 6.0 oz./sq. yd. • Width = 60" NOTE: this material stretches and can extend up to 8% in length, 20% in width • Passes 14 CFR 25.853(a) 12-Second Vertical • Sold by the yard FIREBLOCKING FABRICS SOUTHERN MILLS S/757NW Aramid Batt With Aramid Scrim Item # SM-S757NW TEX TECH 4759R 6.9 oz. PBI, Basofil, Aramid with Scrim Item # TT-4759R *FlameStop is not recommended for full encapsulation of polyfoam cush- ions to meet aircraft fireblocking requirements. FLAMESTOP* Nomex Fabric Item # FS-5646-2200 • 3.3 oz. Fire-Resistant Muslin • 40" width x linear yard • Lightweight, durable 100% cotton fabric • Manufactured to meet CAL 117 and 14 CFR 25.853(a) 12-second Vertical MUSLIN Item # MUS FIREGUARD Fire Protection Fabric Item # FG-101 • Fireguard is a proprietary blend of high-performance fibers that provide an extraordinary level of protection against direct flame and extreme heat. • 58" width x linear yard • Lightweight, flexible, and odor resistant • Passes 14 CFR 25.853(a) 12-Second Vertical • Weight = 6.04 oz/sq yd. • Thickness = .054 in 800/945-7135 • 815/393-4600 • Info@SkandiaInc.com 3 Prices Subject to Change Without Notice • Highly buoyant; used in flotation cushions • Lightweight, Strong, Resilient, and Durable • Ideally Suited as Component Material • Passes 14 CFR 25.853(a) 12-Second Vertical • Sheet Size: 2" x 24" x 36" Great for reshaping arms and backrests ETHAFOAM®, DOW 4101 Item # ETHA41012.0 NAUGAHYDE® VINYL Spirit Millennium Line Ordering Requirements: • 5-yard minimum on all orders • 30-yard minimum order on non-stock colors • Contact us for availability • 54" Roll Width • Superior Tear Strength • Advanced BeautyGard Protective Finish • Contemporary High Styled Surfaces • Environmentally Friendly Materials • Mildew Resistant • Made in the USA Naugahyde Spirit Millennium line meets these flammability test require- ments: • Passes 14 CFR 25.853(a) 12-Second Vertical • California Fire Regulation (Bulletin 117 Sec. E) • Automotive (MVSS-302) • BIFMA Class I • Boston Fire Code (BFD IX-1) • Fed. Spec CID A-A-2950-A CANVAS Item # Canvas/Natural • 7 oz. Fire-Resistant Canvas • 68" width x yard • Aircraft Grade • Self-Extinguishing • Excellent as a bottom cushion close-out in fire blocking applications • Passes 14 CFR 25.853(a) 12-Second Vertical • 5.1 oz./sq. yd. • 60" width x yard • 100% nylon, 400 denier • Passes 14 CFR 25.853(a) 12-second Vertical • Color: Beige PACK CLOTH Item # SK-400D/1 WEBBING Item # BR-8962* • Great for cargo straps, backpacks, luggage, and unlimited Applications for restraining and reinforcements • COML-SPEC-MIL-W-4088K Type II Class 1 • Nylon • Passes 14 CFR 25.853(a) Horizontal* • 1" wide x 100 Yard Roll ELASTIC Item # ELASTIC 1" • 1" wide • Passes 14 CFR 23.853(a) Horizontal • Conformability - Accommodates Irregular Surfaces • Tearability - Ease of Installation • High Quick Stick - Immediate Carpet Bond • High Adhesion - Retains Bond Integrity • Passes 14 CFR 25.853(a) 12-Second Vertical Burn† ITEM # DESCRIPTION SIZE P-108-2-N† Fire-Retardant Tape 2" x 25 yard roll • Flame retardant polyethylene coated waterproof tape • Exceptionally aggressive adhesive to a variety of substrates • Exhibits outstanding handling characteristics and conforms well to duct systems • Passes 14 CFR 25.853(a) 12-Second Vertical Burn ITEM # DESCRIPTION SIZE P-225-3 FR Fire-Retardant Tape 3" x 60 yard roll POLYKEN TAPES DOUBLE-SIDED SEAMING P-108-2-N P-225-3 FR FireGuard Fire Protection Fabric FireGuard FireGuard is a proprietary blend of high-per- formance fibers that provide an extraordinary level of protection against direct flame and extreme heat. BENEFITS • Lightweight, flexible, and odor resistant • Unequaled stretch, comfort, hand and workability • In Stock, Can Ship Same Day! PHYSICAL SPECIFICATIONS WIDTH 58" THICKNESS .054" WEIGHT 6.04 oz/yd2 ELONGATION ASTM D5034-1995 (%) Length 73.2% Width 230.7% COLOR Charcoal WHY CHOOSE FIRE GUARD? • LIGHTWEIGHT • BETTER PERFORMANCE • LOWER PRICE Aero Armor Polyurethane Film Provides Advanced Protection For Your Aircraft From Paint And Surface Erosion A N T E N N A Ready for most antennae configurations E D G E T A P E A variety of widths for any leading edge surface R A D O M E Pre-formed for more than 250 models of aircraft ARE ALWAYS ATTACKING YOUR AIRCRAFT’S SURFACE Rain • Wind • Dust • Sand • FOD • Bugs Aircra� radome and leading edge surface erosion can be prevented by Inc. ™ ORDER TODAY - SHIP TODAY • Bug Resistant • Stain Resistant • Superb Clarity • Op�mum Thinness • UV Stable • Simple Installa�on E D G E T A P E R A D O M E A N T E N N A by Inc. Advanced Aircraft Exterior Protection by Inc. ™ Typical Physical Proper�es Product Thickness 2.0 MIL Acrylic PSA Adhesive Thickness (PSTC-133) 12 MIL Clear Urethane (Non-Yellowing) Tensile - PSI 1740 Elonga�on - Percent 200% Arizona 45 Degree South Exposure Outdoor Weathering - 24 Months No Significant Change in Gloss No Significant Change in Adhesive No Cracking or Glazing PASS High Performance Protection Film Paint and surface erosion degrade airborne weather radar and electronic performance. Paint and surface erosion degrade antenna and electronic perfomance. Damaged and eroded painted surfaces look terrible, become difficult to clean as well as reduce airflow and fuel efficiency. E D G E T A P E R A D O M E A N T E N N A ™ ™ ™ ™ ™ Connect with us! 5000 North Highway 251, Davis Junction, IL 61020 I 815 393 4600 I www.skandiainc.com 4 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Aero Commander Aero Commander 500-1000 (all) Radome Boot (Premium Replacement for 3M: FP020; PM Research Inc.: PM-210) SK1436 Aero Commander Westwind or Jet Commander Radome Boot (Premium Replacement for 3M: FP038; PM Research Inc.: PM-260) SK2201 Airbus Airbus A-318, 319, 320, & 321 Radome Boot (Premium Replacement for 3M: FP110; PM Research Inc.: PM-453) SK3606 Astra Jet Astra Jet 1125, SPX, Gulfstream G100, G150 with IAI Astra Radome & C38A Radome Boot (Premium Replacement for 3M: FP098; PM Research Inc.: PM-5) SK2205 ATR ATR 42, 72-200, DHC-8 Spinner Boot (Premium Replacement for 3M: FP244; PM Research Inc.: PM-8) SK1425 ATR ATR 42, 72 Radome Boot (Premium Replacement for 3M: FP115; PM Research Inc.: PM-7) SK2208 Beechcraft Beechcraft Hawker 125-700, Raytheon Hawker 800-1000 Small Nose Radome Boot (Premium Replacement for 3M: FP157; PM Research Inc.: PM-81, PM81) SK1006 Beechcraft Beechcraft King Air Bullet Nose Vertical Stabilizer Boot (Premium Replacement for 3M: FP173; PM Research Inc.: PM-22) SK1009 Beechcraft Beechcraft BeechJet, Hawker 400A, 400XP or Mitsubishi Diamond, MU-3, Jayhawk Radome Boot (Premium Replacement for 3M: FP084; PM Research Inc.: PM-90) SK1407 Beechcraft Beechcraft 99 Radome Boot (Premium Replacement for 3M: FP035; PM Research Inc.: PM-20) SK1412 Beechcraft Beechcraft Baron W/O Factory Radar Radome Boot (Premium Replacement for 3M: FP068; PM Research Inc.: PM-30) SK1415 Beechcraft Beechcraft 1900D Horizontal Stabilizer Tip Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-25) SK1417 Beechcraft Beechcraft Premier Radome Boot (Premium Replacement for 3M: FP473; PM Research Inc.: PM-39) SK1419 Aircraft radome and leading edge surface erosion can be prevented Aero Armor Radome............................................................................... 5 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Beechcraft Beechcraft Duke Radome Boot (Premium Replacement for 3M: FP179; PM Research Inc.: PM-35) SK1422 Beechcraft Beechcraft 1900D Stabilon Tip Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-304) SK1424 Beechcraft Beechcraft Baron W/Norton Radar Radome Boot (Premium Replacement for 3M: FP069; PM Research Inc.: PM-32) SK1427 Beechcraft Beechcraft 1900D Wing/Winglet Transition Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-300) SK1441 Beechcraft Beechcraft Baron W/Factory Radar Radome Boot (Premium Replacement for 3M: FP055; PM Research Inc.: PM-31) SK2207 Beechcraft Beechcraft Hawker Horizon 4000 Radome Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-515) SK2217 Beechcraft Beechcraft King Air Radome Boot (Premium Replacement for 3M: FP005; PM Research Inc.: PM-21) SK2227 Beechcraft Beechcraft 1900D Eng Oil Cooler Air Intake Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-303) SK2243 Boeing Boeing BBJ SATCOM Tail Bullet Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-585) SK2232 Boeing Boeing 707, 727, 737, C-40, BBJ Radome Boot (Premium Replacement for 3M: FP001; PM Research Inc.: PM-400) SK3603 Bombardier DHC-8, - ATR 42, 72-200, DHC-8 Spinner Boot (Premium Replacement for 3M: FP244; PM Research Inc.: PM-8) SK1425 Bombardier Bombardier Learjet 23, 24, 25, 28, 29, 31, 35, 36 C21A Radome Boot (Premium Replacement for 3M: FP007 OR FP507; PM Research Inc.: PM-110) SK1428 Bombardier Bombardier Learjet 35, 36 & C21A Wing Tip Tank Boot (Premium Replacement for 3M: FP013; PM Research Inc.: PM-132) SK1430 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 6 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Bombardier Bombardier Q400 Spinner Boot (Dowty Prop) (Premium Replacement for 3M: N/A; PM Research Inc.: PM-78) SK2203 Bombardier Bombardier Challenger 600, 601, 604, CRJ-100, 200, 700, 900, 800 RJ and Global Express Radome Boot (Premium Replacement for 3M: FP022; PM Research Inc.: PM-45) SK2211 Bombardier Bombardier Challenger 600, 601 & 604 Left Light Lens Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-47L) SK2212.1 Bombardier Bombardier Challenger 600, 601 & 604 Right Light Lens Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-47R) SK2212.2 Bombardier Bombardier Learjet 50 & 60 Series Radome Boot (Premium Replacement for 3M: FP014; PM Research Inc.: PM-115) SK2216 Bombardier Bombardier 300 Radome Boot (Premium Replacement for 3M: FP536; PM Research Inc.: PM-44) SK2218 Bombardier Bombardier Learjet 45 Radome Boot (Premium Replacement for 3M: FP174; PM Research Inc.: PM-112) SK2220 Bombardier DeHavilland DHC-8 100, 200, 300, Bombardier Q Series Radome Boot (Premium Replacement for 3M: FP048; PM Research Inc.: PM-75) SK2221 Canadair Bombardier Challenger 600, 601, 604, CRJ-100, 200, 700, 900, 800 RJ and Global Express Radome Boot (Premium Replacement for 3M: FP022; PM Research Inc.: PM-45) SK2211 Canadair Bombardier Challenger 600, 601 & 604 Left Light Lens Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-47L) SK2212.1 Canadair Bombardier Challenger 600, 601 & 604 Right Light Lens Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-47R) SK2212.2 Cessna Cessna 310-R Radome Boot (Premium Replacement for 3M: FP114; PM Research Inc.: PM-60) SK1002 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 7 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Cessna Cessna Citation 550, 551, 552, 560V, XL, &Ultra Horizontal Stabilizer Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-351) SK1008 Cessna Cessna 401, 402, 404, 411, 414, 414A, 421, 421B, 421C Radome Boot (Premium Replacement for 3M: FP025; PM Research Inc.: PM-56) SK1011 Cessna Cessna 335, 340, & 340A Radome Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-64) SK1014 Cessna Cessna Citation XL & XLS Navigation Light Lens Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-5202) SK1016 Cessna Cessna 510 Citation Mustang Radome Boot (Premium Replacement for 3M: N/A; PM Research Inc.: N/A) SK1021 Cessna Cessna Citation 680 & 750 Citation X Radome Boot (Premium Replacement for 3M: FP379; PM Research Inc.: PM-53) SK1409 Cessna Cessna R-182, 206, 210, Radome Boot (wing mounted) (Premium Replacement for 3M: FP338; PM Research Inc.: PM-190) SK1413 Cessna Cessna 208 Caravan Wing Mounted Radome Boot (Premium Replacement for 3M: FP034; PM Research Inc.: PM-57) SK1420 Cessna Cessna Cit 560V & Ultra Vertical Fin Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-362) SK1437 Cessna Cessna Citation III, VI, VII, 560XL & 650 Radome Boot (Premium Replacement for 3M: FP070; PM Research Inc.: PM-52) SK2202 Cessna Cessna Conquest I, II (425 & 441), Caravan II Radome Boot (Premium Replacement for 3M: FP041; PM Research Inc.: PM-54) SK2215 Cessna Cessna Citation 525 & 525A Citation Jet, 550 Bravo & 560 Ultra & Encore Radome Boot (Premium Replacement for 3M: FP029; PM Research Inc.: PM-59) SK2222 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 8 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Cessna Cessna Citation I, II, V & 500, 501, 550, S550, 551, 560 Radome Boot (Premium Replacement for 3M: FP029 OR FP529; PM Research Inc.: PM-51) SK2228 Cessna Cessna 560V & Ultra Wing Tip Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-360) SK2231 Cessna Cessna Citation XL & XLS Dorsal Transition Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-5201) SK2237 Dassault Falcon Dassault Falcon 50 & 900 SATCOM Antenna Boot (Premium Replacement for 3M: FP421; PM Research Inc.: PM-104) SK1015 Dassault Falcon Dassault Falcon 10 & 100 Radome Boot (Premium Replacement for 3M: FP37; PM Research Inc.: PM-97) SK1405 Dassault Falcon Dassault Falcon 20, 50, 200 & UH25 Radome Boot (Premium Replacement for 3M: FP018; PM Research Inc.: PM-100) SK1406 Dassault Falcon Dassault Falcon 900 & 2000 Radome Boot (Premium Replacement for 3M: FP053; PM Research Inc.: PM-103) SK2206 DeHavilland DeHavilland DHC-6 200/300 Twin Otter Radome Boot (Premium Replacement for 3M: FP031; PM Research Inc.: PM-73) SK2240 DeHavilland BAE146 or BAC146, AVRO RJ Series Radome Boot (Premium Replacement for 3M: FP-51 or FP-551; PM Research Inc.: PM-12) SK2244 DeHavilland Bombardier Q Series DHC-8, DeHavilland Dash 8 / Q400 Vertical Stabilizer Bullet Nose (Premium Replacement for 3M: FP359; PM Research Inc.: PM-375) SK2245 Dornier Dornier 328 Turboprop Spinner Boot (Premium Replacement for 3M: FP202; PM Research Inc.: PM-91) SK1005 Dornier Dornier 328 (Turboprop), 328Jet & Envoy 3 Radome Boot (Premium Replacement for 3M: FP241; PM Research Inc.: PM-92) SK2204 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 9 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Embraer Embraer EMB-135, 140, 145 & Legacy Radome Boot (Premium Replacement for 3M: FP456; PM Research Inc.: PM-96) SK1404 Embraer Embraer 135, 140, 145 Horizontal StSKilizer Tip Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-9602) SK1440 Embraer Embraer Phenom 100, 300 Radome Boot (Premium Replacement for 3M: FP036; PM Research Inc.: PM-94) SK2219 Embraer Embraer 120 Radome Boot (Premium Replacement for 3M: FP047; PM Research Inc.: PM-95) SK2224 Embraer Embraer 170, 175, 190, 195 Radome Boot (Premium Replacement for 3M: FP405; PM Research Inc.: PM-99) SK3601 Fairchild Saab/Fairchild 340 Radome Boot (Premium Replacement for 3M: FP043; PM Research Inc.: PM-500) SK2209 Fairchild Swearingen Fairchild Metro & Merlin & C-26 Radome Boot (Premium Replacement for 3M: FP011; PM Research Inc.: PM-150) SK2213 Fairchild Saab 340B & 2000 Radome, PN: 7252401-504 (NC # 258 & up, after SB 53) (Premium Replacement for 3M: FP161; PM Research Inc.: PM-501) SK2214 Fokker Fokker F-28, F-70, F-100 Radome Boot (Premium Replacement for 3M: FP109; PM Research Inc.: PM-460) SK3607 Gulfstream Gulfstream G3, G4, G5, G300, G400, G450, G500, G550 Radome Boot (Premium Replacement for 3M: FP197; PM Research Inc.: PM-121) SK1410 Gulfstream Gulfstream G150 with IAI Galaxy Radome, G200, IAI Galaxy Radome Boot (Premium Replacement for 3M: FP324; PM Research Inc.: PM-153) SK1421 Gulfstream Astra Jet 1125, SPX, Gulfstream G100, G150 with IAI Astra Radome &C38A Radome Boot (Premium Replacement for 3M: FP098; PM Research Inc.: PM-5) SK2205 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 10 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Hawker Beechcraft Hawker 125-700, Raytheon Hawker 800-1000 Small Nose Radome Boot (Premium Replacement for 3M: FP157; PM Research Inc.: PM-81, PM81) SK1006 Hawker Beechcraft BeechJet, Hawker 400A, 400XP or Mitsubishi Diamond, MU-3, Jayhawk Radome Boot (Premium Replacement for 3M: FP084; PM Research Inc.: PM-90) SK1407 Hawker Beechcraft Hawker Horizon 4000 Radome Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-515) SK2217 Honda Jet Honda Jet Radome Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-90100) SK2242 IAI Galaxy IAI Galaxy Gulfstream G150 with IAI Galaxy Radome, G200, IAI Galaxy Radome Boot (Premium Replacement for 3M: FP324; PM Research Inc.: PM-153) SK1421 Jetstream JetStream 31, 32 & 41, HP-137 Radome Boot (Premium Replacement for 3M: FP027; PM Research Inc.: PM-85) SK1403 Learjet Bombardier Learjet 23, 24, 25, 28, 29, 31, 35, 36 C21A Radome Boot (Premium Replacement for 3M: FP007 OR FP507; PM Research Inc.: PM-110) SK1428 Learjet Bombardier Learjet 35, 36 & C21A Wing Tip Tank Boot (Premium Replacement for 3M: FP013; PM Research Inc.: PM-132) SK1430 Learjet Bombardier Learjet 50 & 60 Series Radome Boot (Premium Replacement for 3M: FP014; PM Research Inc.: PM-115) SK2216 Learjet Bombardier Learjet 45 Radome Boot (Premium Replacement for 3M: FP174; PM Research Inc.: PM-112) SK2220 Mitsubishi Mitsubishi Diamond, MU-3, Jayhawk Radome Boot (Premium Replacement for 3M: FP084; PM Research Inc.: PM-90) SK1407 Mitsubishi Mitsubishi MU-2 Radome Boot (Premium Replacement for 3M: FP026; PM Research Inc.: PM-280) SK2229 Piaggio Piaggio P180 Avanti Radome Boot (Premium Replacement for 3M: FP555; PM Research Inc.: PM-156) SK1007 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 11 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Piaggio Piaggio P180 Avanti Horizontal Stablizer Tip Boot L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-2025) SK1012 Piaggio Piaggio P180 Avanti Navigation Light Lens Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-2022) SK1418 Piaggio Piaggio P180 Avanti Wing Root Fairing Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-2021) SK1438 Piaggio Piaggio P180 Avanti Canard Wing Root Fairing Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-2026) SK2236 Pilatus Pilatus PC-21 Spinner Boot (Premium Replacement for 3M: FP408; PM Research Inc.: PM-192) SK1004 Pilatus Pilatus PC-12 Tail Bullet Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-191) SK1010 Pilatus Pilatus PC-12 Inboard Flap Track Fairing Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-202) SK1017 Pilatus Pilatus PC6, PC-12, Radome Boot (wing mounted) (Premium Replacement for 3M: FP338; PM Research Inc.: PM-190) SK1413 Pilatus Pilatus PC-12 Center Flap Track Fairing Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-201) SK1434 Pilatus Pilatus PC-12 Horizontal Stabilizer Tip Boot Set L&R (Premium Replacement for 3M: N/A; PM Research Inc.: PM-205) SK1435 Pilatus Pilatus PC-12 Outboard Flap Track Fairing Recognition Light Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-204) SK2230 Piper Piper Malibu MT Prop P-477A Boot (Premium Replacement for 3M: N/A; PM Research Inc.: PM-15806) SK1001 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 12 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Piper Piper Aerostar Radome Boot (Squared Nose Early Norton 4059X, 4079X) (Premium Replacement for 3M: FP128; PM Research Inc.: PM-172) SK1003 Piper Piper Navajo & Chieftain Radome Boot (Premium Replacement for 3M: FP023; PM Research Inc.: PM-170) SK1408 Piper Piper Aerostar 60-602P Radome Boot (Rounded Nose) (Premium Replacement for 3M: FP127; PM Research Inc.: PM-173) SK1411 Piper Piper Aztec E & F Models Radome Boot (Premium Replacement for 3M: FP136; PM Research Inc.: PM-177) SK1414 Piper Piper Cheyenne I, Navajo, & Mojave (Pressurized) Radome Boot (Premium Replacement for 3M: FP012; PM Research Inc.: PM-160) SK1416 Piper Piper Malibu Mirage & Meridian Radome Boot (Premium Replacement for 3M: FP406; PM Research Inc.: PM-158) SK1426 Piper Piper Seneca Radome Boot (Premium Replacement for 3M: FP54; PM Research Inc.: PM-175) SK1429 Piper Piper Malibu Mirage Wing Root Fairing Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-159) SK1431 Piper Piper Cheyenne III, IV Radome Boot (Premium Replacement for 3M: FP024; PM Research Inc.: PM-165) SK1432 Piper Piper Cheyenne II PA-31T & IIXL PA-31T2 Radome Boot (Premium Replacement for 3M: FP012; PM Research Inc.: PM-161) SK2223 SAAB Saab/Fairchild 340 Radome Boot (Premium Replacement for 3M: FP043; PM Research Inc.: PM-500) SK2209 Sabreliner Sabreliner 40, 60, 65, 70, 80 Radome Boot (Premium Replacement for 3M: FP019; PM Research Inc.: PM-270) SK2210 Aero Armor Radome............................................................................... Aircraft radome and leading edge surface erosion can be prevented 13 TM AIRCRAFT MAKE PRODUCT DESCRIPTION PRODUCT ID Socata Socata TBM 700 Radome Boot (wing mounted) (Premium Replacement for 3M: FP338; PM Research Inc.: PM-190) SK1413 Westwind Westwind or Jet Commander Radome Boot (Premium Replacement for 3M: FP038; PM Research Inc.: PM-260) SK2201 PRODUCT DESCRIPTION PRODUCT ID EMS Satcom EMS Satcom Antenna - AMT-3800 Boot (Premium Replace-ment for 3M: N/A; PM Research Inc.: PM-588) SK1402 Honeywell Honeywell TCAS 9 1/4” Diameter Boot Set (Premium Replacement for 3M: N/A; PM Research Inc.: PM-550) SK1423 TCAS Sensor Systems TCAS Sensor Systems Antenna Boot (Premium Replace-ment for 3M: N/A; PM Research Inc.: PM-531) SK1401 PRODUCT DESCRIPTION PRODUCT ID Edge Tape 2” x 50’ Roll Leading Edge Tape (Premium Replacement for 3M: N/A; PM Research Inc.: PM-T2H) SK2AA Edge Tape 3” x 50’ Roll Leading Edge Tape (Premium Replacement for 3M: N/A; PM Research Inc.: PM-T3H) SK3AA Edge Tape 4” x 50’ Roll Leading Edge Tape (Premium Replacement for 3M: N/A; PM Research Inc.: PM-T4H) SK4AA Aero Armor Radome............................................................................... Aero Armor Antenna................................................................................................. Aero Armor Edge Tape............................................................................................... Making Aircraft Quieter, Safer and More Comfortable Make a Sound Decision Acoustic Solutions Soundproofing A Trusted Partner to the OEM, VIP, VVIP and Refurbishment Market Custom Acoustic Solutions Tailored to Your Needs In-flight acoustical analysis of your cabin at all phases of flight Partner with global OEM and refurbishment leaders The Science of Acoustic Engineering and Materials Engineered for Performance Soundproofing kits for over 80 aircraft models Unmatched reduction in cabin noise & vibration Manufacturing thermal/acoustic materials that meet global Flammability standards Connect with us! 5000 North Highway 251, Davis Junction, IL 61020 I 815 393 4600 I www.skandiainc.com 55.00 50.00 45.00 60.00 65.00 70.00 75.00 Cockpit Entry RH Aft Club LH Aft Club RH Fwd Club LH Fwd Club Divan Fwd Divan Center Divan Aft LH Single Club LH Fwd Club Lav Baggage Challenger 605 55.00 50.00 45.00 60.00 65.00 70.00 75.00 Cockpit Entry RH Divan Fwd RH Divan A � PAX 1 PAX 2 PAX 3 PAX 4 PAX 5 PAX 6 LAV Cessna Citation 650 55.00 50.00 45.00 60.00 65.00 70.00 75.00 Cockpit Crew Seat Entry Galley LH A� Single Club RH A� Single Club LH Fwd Single Club RH Fwd Single Club LH A� Dbl Club Window LH Fwd Dbl Club Window LH Fwd Dbl Club Aisle LH A� Single Club (13) LH Fwd Single Club (14) Divan Fwd Divan Center Divan A� Lavatory Baggage LH A� Dbl Club Aisle Falcon 900 Pre dB(SIL) Pre dB(SIL) Pre dB(SIL) Pre dB(SIL) Post dB(SIL) Post dB(SIL) Post dB(SIL) Post dB(SIL) Average dB(SIL) Reduction: 3.1 Cessna Citation 650 Falcon 900 Global 5000 Challenger 605 Average dB(SIL) Reduction: 4.59 Average dB(SIL) Reduction: 3.48 Average dB(SIL) Reduction: 4.40 AeroTherm Thermal Acoustic Insulation Radiant Panel Certified AeroTherm SK-7000 Skandia's Radiant Panel AeroTherm provides ther- mal/acoustic insulation. Products can be provided to specified widths, lengths, and thicknesses. Our reinforced film resists abrasion, moisture, and contaminants. The fiberglass thermal/acoustic insulation material is lightweight, water-repellent and fire-retardant. EASE Thermal Insulation Systems provide superior thermal insulation and acoustic attenu- ation of high frequencies in the important dBSIL range (Speech Interference Level). Repair/sealing tape available. BENEFITS • Radiant Panel Certified • In Stock, Can Ship Same Day! • Lightweight • Meets 25.856 (a) • High Frequency Attenuation • Custom Fabrication is available to meet specialized applications • Skandia's AeroTherm Strip Blankets reduce cost by allowing interior/airframe technicians to fabricate and install blankets at the point of use (utilizing SK-T series of insulation sealing tape). AeroBlanket SK-7000 AeroTherm Thermal Acoustic Insulation Radiant-Panel Certified TECHNICAL DATA SHEET Typical physical properTies Thickness 1, 2, 3 in WidTh 7, 9, 10, 11, 12, 15, 16, 20, 22 in lengTh 1" thick x 50' roll 2" thick x 50' roll 3" thick x 25' roll WeighT 1 in thick: 0.07 lb/ft2 2 in thick: 0.12 lb/ft2 3 in thick: 0.17 lb/ft2 color Dull Grey FlammabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes 14 CFR 25.853(a) 60-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes Fiberglass densiTy 0.6 pcf Vapor barrier Film Thickness 0.5 mil Thermal conducTiViTy, asTm c518 0.242 BTU in/F/ft • h/@75oF Transmission loss, asTm e90 @ 1 in Thick: 1000 Hz 11 dB 2000 Hz 19 dB 4000 Hz 29 dB addiTional speciFicaTions/compliance BMS 8-48, ASTM C8000-94, STM 26701, DMS 1967E sk-7001-i insulaTion maTerial corrosion Boeing BMS 8-48 W - Type 3, Class 2, Grade B SK-7000-F2 barrier Film Boeing BMS 8-377, Type II, Class 1 Typical physical properTies Thickness 1.00 + .025 in WidTh 34.0 ± 0.5 in WeighT 0.050 + 0.005 - 0.004 lb/ft2 densiTy 0.60 lbs./ft3 color Green Binder conTenT Phenolic WaTer repelleNT Wicking TemperaTure limiT 450OF corrosion RESISTANT Transverse airfloW FLAMMABILITY Radiant Panel Vertical Test 60-Second and 12-Second Vertical 45-Degree Angle 14 cfr 25.856(a) 14 CFR 25.853(a) 14 CFR 25.855(d) Punking Test Boeing BSS 7230 Passes Passes Passes No Punking acousTical properTies Transmission Loss ASTM E90 (using three 1" layers of .6 PCF insulation) 1000 Hz Oct. Band: 14.1 dB, min 2000 Hz Oct. Band: 20.1 dB, min 4000 Hz Oct. Band: 27.2 dB, min THERMAL CONDUCTIVITY (ASTM C-518 (BTU-in/oF•h•ft2) DENSITY lb/ft3 THICKNESS MEAN TEMP OF (BETWEEN HOT AND COLD SURFACE) 0.60 1" 50 75 100 200 300 400 0.24 0.25 0.27 0.35 0.42 0.55 Compliance with OEM and Industry specifications per: • Boeing BMS 8-48 Type 3, Class 2, Grade B • Douglas DMS 1967 • ASTM C800-94 AeroTherm Thermal Acoustic Insulation .6 pcf Radiant Panel Certified SK-7001 Lightweight, Water-Repellent Insulation Material TECHNICAL DATA SHEET AeroTherm Thermal Acoustic Insulation Vapor Barrier Film Radiant Panel Certified SK-7000-F2 Lightweight, High-Strength Vapor Barrier Film TECHNICAL DATA SHEET T ypical physical properTies W eighT 1.0 oz./yd2 Thickness 0.0005” Thread Adhesion 3.5 ( lbs./1.5") heaT seal (T-peel) Warp 4.0 (lbs./in) Fill 3.7 (lbs./in) heaT sealing insTrucTions Heat-sealing of SK-7000F2 can be done by hand iron, impulse, and ultrasonic methods. Heat-sealing is done with yarn-side to yarn-side. Use a heat setting between 375° to 400°F. Always keep a hand iron in motion to prevent shrinkage of the film. FlammabiliTy FAR 25.853(a) 12-Second Vertical Test Passes FAR 25.853(a) 60-Second Vertical Test Passes FAR 25.856(a) Radiant Panel Passes moisTure permeance 0.88 grains/ft2/24 hrs/in of Hg reinForcemenT 20 x 10 Leno Scrim bursT sTrengTh 64 psi color Dull Grey FabricaTion meThods May be sealed with heat, tape, stitching, or ultrasonically Taping For sealing, repairs, and local reinforcements of SK-7001, SK-T3 or SK-T4 tapes are recommended. These tapes are lightweight, reinforced, and pressure sensitive. packaging Roll Length Up to 350 yards Width 52" ± 1" Custom Cuts Available upon request sTorage and shelF liFe SK-7000-F2 has a shelf life of one year from the date of shipment when stored in the original container at 75% relative humidity and between 50°F and 90°F. Max operating temp 120-130C (250-265F) Compliant with BMS 8-377, Type II, Class 1 AeroTherm Thermal Acoustic Insulation Quilted Blanket AeroTherm SK-QB3 Skandia's Quilted-Blanket provides a durable util- ity liner for military, cargo aircraft, helicopters; as well as nose-lockers. Edge-binding is available. SK-QBT1 BENEFITS • Meets 14 CFR 25.853(a) 12 and 60 Second Vertical, MIL-C-22787 and BMS8-48 • Lightweight • High-Frequency Attenuation AeroBlanket SK-QB3 AeroTherm Thermal Acoustic Insulation Quilted-Blanket TECHNICAL DATA SHEET Typical physical properTies sK-QB3 ThicKness 1" nominal WidTh 48" lengTh Up to 50' roll WeighT 0.30 lb/sq ft QuilT paTTern 3”x”3” diamond color Grey FlammaBiliTy 14 CFR 25.853(a) 12-Second Vertical Passes 14 CFR 25.853(a) 60-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel ------------ FiBerglass densiTy .6 pcf recommended edge-Binding Tape sK-QBT1 SK-QB3 grey facing meets MIL-C-22787 Fiberglass meets BMS8-48 SK-QBT1 meets MIL-C-22787 A variety of fasteners are available for installation of AeroBlankets, AeroBarriers, etc. Please contact Skandia's Acoustics department for addi- tional fastener recommendations by e-mailing Info@SkandiaInc.com or calling 815-393-4600. SK-ISR-2 *Use with SK-ISR-2 ITEM # DESCRIPTION SK-IS-1.5* Insulation Stud SK-ISR-2 Insulation Stud Retainer AeroFasteners SK-IS-1.5* AeroFasteners For Installation of Blankets & Barrier 2310025 • Hemostat pliers with cushion grip for intricate installation work in tight spaces • Ratchet lock in the handle allows you to vary gripping pressure • Jaws are serrated and hold firmly without cutting • Stainless steel for corrosion resistance • 10.375" long overall • Straight jaws, 3.25" long AeroFasteners For Installation of Blankets & Barrier • Nylon Cable Tie used for securing blankets and barriers to the frame, quickly and simply! • Fire-Retardant; handles temperatures from -40° to +203°F • Meet UL94V-0 flammability requirements • Tensile strength: 50 lbs. • Sold in 50 ct. pack • Sold separately: SK-IW: Insulation Retainer Washer • 2310025 (stainless steel) are used to temporarily (removable) hold overframe blankets in position while SK-CT fasteners are installed • 2310025 can be used to attach overframe blankets when other means are not possible Sharp tip allows for quick and easy installation of SK-CT fasteners into overframe blankets and barrier ITEM # DESCRIPTION Hemostat Installation Tool SK-CT** F/R Nylon Cable Tie, 11.50" SK-IW Insulation Retainer Washer 2310025 Spring Clip Insulation Clamp **Use with SK-IW AeroTapes Insulation and Utility Tape w/PSA Radiant Panel Certified AeroTape SK-T3 • SK-T4 • SK-T3BLK Radiant Panel Certified tapes for aircraft, suitable for a wide variety of applications, including insula- tion sealing, closing out window/avionic spaces, or attaching adjacent materials. Note: Meets 14 CFR 25.856(a) Radiant Panel by itself. Must be tested in composite form if using any other materials BENEFITS • Radiant Panel Certified • Widths from 3" – 4" • High Tack and Peel Strength • Reinforced FR Scrim • Will Not Support Corrosion Introducing SK-T3 Black Insulation and Utility Tape AeroBlanket SK-T3 • SK-T4 • SK-T3BLK AeroTape Radiant-Panel Certified TECHNICAL DATA SHEET Typical physical properTies sK-T3 sK-T4 sK-T3BlK size 3" x 60 yard roll 4" x 60 yard roll 3" x 60 yard roll WeighT 3.0 oz/sq yard 3.0 oz/sq yard 3.0 oz/sq yard color Dull Grey Dull Grey Black consTrucTion Metallized PVF Metallized PVF Black PVF F/R acrylic PSA F/R acrylic PSA F/R acrylic PSA F lammaBiliTy 14 CFR 25.853(a) 12-Second Vertical Passes Passes Passes 14 CFR 25.853(a) 60-Second Vertical Passes Passes Passes 14 CFR 25.856(a) Radiant Panel Passes Passes Passes BMS 5-157 Type I, Grade A, Form 1 Passes Passes Tensile sTrengTh, psTc-31 10.3 lbs/avg. inch width 10.3 lbs/avg. inch width 23.6 lbs/avg. inch width peel sTrengTh, psTc-1 (room Temp) 3.2 lbs./1" width 3.2 lbs./1" width 3.8 lbs./1" width shelF liFe Minimum of 18 months in cool, dry storage UTILITY TAPES • DO NOT PASS RADIANT PANEL Typical physical properTies p-225-3Fr size 3" x 60 yard roll WeighT 10.5 oz/yard2 color White consTrucTion PE Coated cloth, F/R acrylic PSA ToTal ThicKness 20 mil F lammaBiliTy 14 CFR 25.853(a) 12-Second Vertical Passes Tensile sTrengTh, psTc-31 28 lbs/avg. inch width peel sTrengTh, psTc-1 > 120/in. avg; 3 day shelF liFe Maximum of 12 months in cool, dry storage Flame Barrier is a lightweight, polymer-coated fiberglass fabric with which is certified to 14 CFR 25.856(a) Radiant Panel. Flame Barrier utilizes wo- ven fiberglass as the reinforcement for the flexible polymer coated flame barrier. The fiberglass makes the material extremely flame resistant, with high tensile strength to weight, and superior dimen- sional stability. Flame Barrier is used in aerospace applications such as a pipe, hose or ducting wrap. Available in 4.0 oz. per square yard weight, Flame Barrier is provided in 50" wide rolls at custom lengths. BENEFITS • Radiant Panel Certified • Excellent Strength-To-Weight Ratio • Suitable for many applications Flame Barrier SK-15004 Flame Barrier Polymer Coated, Woven Fiberglass Fabric Radiant Panel Certified AeroBlanket SK-15004 • Utility Fabric Flame Barrier Polymer Coated, Woven Fiberglass Fabric Radiant Panel Certified TECHNICAL DATA SHEET Can be used in a wide variety of covering and/or facing applications, including edge binding for quilted insulation blanket, SK-QB2RP Typical physical properTies roll size 50" x linear yard WeighT 4.0 oz/sq yd Thickness .01" color Dark Grey FlammabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes 14 CFR 25.853(a) 60-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes bms 8-370 Meets nbs smoke Ds < 50 breaking sTrengTh, FTM 5100 > 110 lbs/in Tear sTrengTh, ASTM D1117 > 12 lbs. FED-STD-191 Tensile (grab) Warp/Fill 145/119 lb AeroBarrier 60 oz. Barrier AeroBarriers 60 oz. Barrier AeroBarrier is a flexible sheet material used for noise control applications in aircraft. Meets 14 CFR 25.853(a) 12-Second Vertical requirements and delivers excellent acoustic performance at any desired weight level. Sold by the linear yard. BENEFITS • In Stock, Can Ship Same Day! • Excellent transmission loss, at high frequencies AeroBlanketAeroBarrier Flexible Barrier TECHNICAL DATA SHEET TYPICAL PHYSICAL PROPERTIES SIZE 50" x linear yard WEIGHT, FTM 5041 60 oz/sq yard THICKNESS, FTM 5030 0.03" COLOR Black/White FLAMMABILITY 14 CFR 25.853(a) 12-Second Vertical Passes AeroBlanket consists of one layer of AeroBarrier bonded to one layer of Radiant Panel Certified, wa- ter repellent Nomex fiber. The barrier is available in various weights, providing increasing levels of sound transmission loss. AeroBlanket is an “overframe” blanket, which is used to closeout the insulation and prevent a direct path for sound and cold into the aircraft cabin. The AeroBarrier component of the blanket is highly effective in reduc- ing sound levels and the fiber is very effective at reduc- ing high frequency sound levels. AeroBlanket is also available with barrier sandwiched between two layers of fiber. All AeroBlankets are pro- vided 48" wide, at custom lengths on a roll. AeroBlanket BENEFITS • Radiant Panel Certified • Excellent Transmission Loss Performance • Inherently Water Repellent SK-8013 & SK-8014 AeroBlanket Acoustic Insulation Radiant Panel Certified AeroBlanket SK-8013 • SK-8014 Water Repellent Overframe Blanket AeroBlanket High Performance Barrier w/Light- weight, Low Density Fiber Blanket Radiant Panel Certified TECHNICAL DATA SHEET Typical physical properTies sK-8013 sK-8014 size 48" x linear yard 48" x linear yard WeighT 40 oz/sq yard 50 oz/sq yard ThicKness 0.13" 0.16" color Dark Grey/White Dark Grey/White FlammabiliTy 14 CFR 25.853(a) 60-Second Vertical Passes Passes 14 CFR 25.856(a) Radiant Panel Passes Passes barrier Cast Polymer Cast Polymer Weight 30 oz/sq yard 40 oz sq/yard Thickness 0.016" 0.04" Fiber One Layer of 0.125" thick One Layer of 0.125" thick Radiant Panel Nomex Radiant Panel Nomex Weight 10 oz/sq yard 10 oz/sq yard Thermal range -55oF to 450oF -55oF to 450oF WaTer repellenT Meets BMS 8-42W Meets BMS 8-42W AeroBlanket consists of one layer of AeroBarrier bonded between two layers of Radiant Panel Certified, water repellent Nomex fiber. AeroBlanket is an overframe blanket, which is used to close-out the insulation and prevent a direct path for sound and cold into the aircraft cabin. The AeroBarrier component of the blanket is highly effective in reduc- ing sound levels and the fiber is very effective at reduc- ing high frequency sound levels. All AeroBlankets are provided 48" wide, at custom lengths on a roll. Custom fabrication is also available to suit specialized applications. AeroBlanket BENEFITS • Radiant Panel Certified • Excellent Transmission Loss Performance • Inherently Water Repellent SK-8160 AeroBlanket Acoustic Insulation Radiant Panel Certified AeroBlanket Typical physical properTies size 48" x linear yard WeighT 79 oz/sq yard Thickness 0.3" color Dark Grey F lammabiliTy 14 CFR 25.853(a) 60-Second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes barrier Vinyl Barrier Weight 60 oz/sq yard Thickness 0.06" F iber Two Layers of 0.125" thick Radiant Panel Nomex Weight 9.5 oz/sq yard (per layer) Thermal Range -55oF to 450oF Thermal conducTiviTy DIN EN 12664 0.291 BTU in/ft2 • hr • oF @73.4oF SK-8160 79 oz. Overframe Blanket AeroBlanket High Performance Barrier w/Light- weight, Low Density Fiber Blanket Radiant Panel Certified TECHNICAL DATA SHEET AeroBlanket SK-8118-2WR AeroFelt 9.5 Oz Carpet Pad TECHNICAL DATA SHEET TYPICAL PHYSICAL PROPERTIES SIZE 50" x linear yard WEIGHT, FTM 5041 9.5 oz/sq yard THICKNESS, FTM 5030 0.125" COLOR Dark Grey FLAMMABILITY 14 CFR 25.853(a) 60-second Vertical Passes 14 CFR 25.856(a) Radiant Panel Passes THERMAL RANGE -55°F to 450°F THERMAL CONDUCTIVITY K= .24 BTU/in/hr/°F/ft² Acoustical fiber felt pad, versatile thermal and acoustic insulation SK-8240PSA-ADV - Panel and cabinetry damping. SK-8240FPSA-ADV - Cabin floor damping and Bulkhead damping. This improved product offers the triple advantage: less weight, higher performance and lower cost, when compared to the competition. Results are: 6-20% lower weight; 25% lower cost; and improved damping results in side by side test- ing at an independent testing lab. AERODAMP is a constrained layer damping sheet with a self-adhesive backing: just cut to fit, peel and stick. AeroDamp SK-8240PSA -ADV • SK-8240FPSA-ADV BENEFITS • Radiant Panel Certified • Improved damping properties! • In stock, ships same day! AeroDamp Advanced High Performance Damping Radiant Panel Certified New Improved Damping AeroBlanket SK-8240PSA-ADV • SK-8240FPSA-ADV AeroDamp Advanced High Performance Damping Radiant Panel Certified TECHNICAL DATA SHEET Typical physical properTies sK-8240psa-aDV sK-8240Fpsa-aDV size 24" x 48" 24" x 48" WeighT (oz/sq FT) 5.0 7.0 ThicKness FTM 5030 0.04" 0.04" color White Silver FlammabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes Passes 14 CFR 25.853(a) 60-Second Vertical Passes Passes 14 CFR 25.856(a) Radiant Panel Passes Passes 14 CFR 25.853(d) Smoke Density Passes Passes 14 CFR 25.853(d) Heat Release Passes operaTing TemperaTure Min Application Temp 50oF 50oF Max Continuous Operating Temp 200oF 200oF Max Intermittent Operating Temp 200oF 200oF shelF liFe One year when stored at 70oF/50% R.H. out of direct sunlight. E-A-R ADC Specialty Composites ADC Specialty Composites Temperature and Frequency Sensitive Materials for Pressurized and Non-Pressurized Aircraft Demonstration of Compliance with Material Flammability Requirements per 14 CFR 25.853(a)12-Second Vertical and 60-Second Vertical and 14 CFR 25.856(a) Radiant Panel. All products meet 12-Second Vertical/60-Second Vertical/Radiant Panel with the exception of ADC- 122 and ADC-152 which only meets 12-Second Vertical and Radiant Panel. BENEFITS • Controls both Airborne Noise and Structural Vibrations. • In Stock, Can Ship Same Day! ADC-124 ADC-126 ADC-005 ADC-006 ADC-122 AeroBlanket ADC Specialty Composites E-A-R ADC Specialty Composites TECHNICAL DATA SHEET COMPOSITE DESCRIPTION WEIGHT DIMENSIONS ADC-005 Structural Damping .41 lbs/ft² 3.69 lbs. 27" x 48", 9 sq. ft. .04" Thick 2.00 kg. 1.67 kg. 69 cm x 122 cm, .836 sq. m. ADC-006 Structural Damping .50 lbs/ft² 4.50 lbs. 27" x 48", 9 sq. ft. .05" Thick 2.44 kg. 2.04 kg. 69 cm x 122 cm, .836 sq. m. ADC-122 Acoustical Barrier/Absorber .60 lbs/ft² 5.40 lbs. 27" x 48", 9 sq. ft. .310" Thick 2.93 kg. 2.45 kg. 69 cm x 122 cm, .836 sq. m. ADC-124 Low Temperature Damping .26 lbs/ft² 2.34 lbs. 27" x 48", 9 sq. ft. 1.27 kg. 1.06 kg. 69 cm x 122 cm, .836 sq. m. ADC-126 .60 lbs/ft² 5.40 lbs. 2.93 kg. 2.45 kg. .255" Thick Low Temperature Damping .300" Thick 27" x 48", 9 sq. ft. 69 cm x 122 cm, .836 sq. m. Skandia stocks E-A-R Damping, Absorption, and Barrier materials to reduce cabin noise levels. When the right combination of these materials is installed in the specified location in an aircraft, both airborne acoustic ener- gy and structural-borne vibration energy are reduced. AeroLite Carpet Pad Acoustical Carpet Pad Dimensionally Stable AeroLite Carpet Pad SK-7328 • SK-7338 • SK-7348 • SK-7348-80W AeroLite Carpet Pad is a synergistic family of foam and felt composite used for a durable pad and it provides both thermal and acoustic floor level insulation. The padding is available in various thicknesses, providing increasing levels of acous- tic absorption, sound transmission loss, thermal insulation and cushioning effect. The composite pad delivers the advantages of both foam and felt paddings while eliminating their disadvantages when used alone, e.g. will not wrinkle, improved resistance to compression set, excellent durability. Additionally, it has very low electrostatic discharge potential. AeroLite Carpet Pad is a versatile material, which can be manufactured as a carpet pad and in com- bination with AeroBarrier as an effective floor level acoustical barrier. AeroLite Carpet Pad is available in 1/4", 3/8" and 1/2" thicknesses x 52" wide by the linear yard; also available 1/2" thick x 80" wide x linear yard. Additionally, custom fabrication is available to meet specialized applica- tions. BENEFITS • Provides a Plush Feel Underfoot • More Durable than a Fiber Pad • Low Thermal Conductivity Value • Excellent Acoustic Absorption • Low Static Propensity • 80" width accommodates wide body biz jets without seaming (1/2" thickness only) AeroBlanket SK-7328 • SK-7338 • SK-7348 • SK-7348-80W AeroLite Carpet Pad Acoustical Carpet Pad Dimensionally Stable TECHNICAL DATA SHEET Typical physical properTies size 52" ± .25" x linear yard; 80" ± .50" x linear yard, 0.50" thickness only Thickness 0.25", 0.375", 0.50" WeighT 24, 39, 42 oz/sq yard color Dark Grey and Beige FlammabiliTy 14 CFR 25.853 12-Second Vertical Passes Thermal conducTiviTy <.254 BTU-IN/Hr -oF/sq ft @ 0.50 in AeroLite Carpet Pad Acoustical Carpet Pad w/Sound and Moisture Barrier AeroLite Carpet Pad w/Barrier SK-7348-D32 • SK-7348-D60 AeroLite Carpet Pad with Sound Barrier provides acoustic absorption, sound transmission loss, thermal insulation and a comfortable cushion- ing effect. The composite pad delivers the advantages of both foam and felt padding while eliminating disadvantages when used alone. For instance, it will not wrinkle, provides improved resistance to compression set, excellent durability and has very low electrostatic discharge potential. The addition of the integral sound and moisture barrier layer reduces under floor noise entering the cabin and prevents liquid spills from passing through the pad and into the airframe. BENEFITS • Provides a Plush Feel Underfoot • Blocks Under Floor Noise • Protects Airframe from Spilled Liquids and Rain • More Durable than a Fiber Pad • Low Thermal Conductivity Value • Excellent Acoustic Absorption • Low Static Discharge Propensity • Dimensionally Stable AeroBlanket SK-7348-D32 • SK-7348-D60 AeroLite Carpet Pad Acoustical Carpet Pad w/Sound and Moisture Barrier TECHNICAL DATA SHEET INSTALLATION: Install with the barrier side up and the Nomex fibers down. It can be secured using Skandia’s Double-Sided Tape: P-108-2-N or Hook velcro (attaches directly to fiber; Loop not required). Typical physical properTies sK-7348-D32 sK-7348-D60 size 52" x linear yard 52" x linear yard WeighT 72 oz/sq yard 102 oz/sq yard ThicKness 0.50" 0.50" color Dark Grey Dark Grey FlammabiliTy 14 CFR 25.853(a) 12-Second Vertical Passes Passes Thermal conDucTiviTy ---------------- <.279 BTU-IN/Hr -oF/sq ft @ 0.50 in ---------------- Skandia Soundproofing Solutions Making Aircraft Quieter, Safer and More Comfortable Data Dictates Design By combining engineering analysis with the most effective material available, Skandia delivers significant, qualified soundproofing results. 800/945-7135 • 815-393-4600 • Info@SkandiaInc.com 2 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com A Quiet Aircraft Means a Quiet Journey The fastest way to judge the quality of an interior completion is by how quiet it is. For over 30 years, Skandia has been listening to what our customers want and then creating acoustics solutions that keep noise and vibration to a whisper. In fact, our sound- proofing solutions are the talk of the aviation industry. You just can’t hear it. Data Dictates Design In soundproofing engineering, Skandia combines the latest technological advancements and innovations to reduce weight and maximize performance. Utilizing state-of-the-art equipment, Skandia engineers perform sound frequency tests in order to establish an aircraft’s unique acoustical signature while at cruise speed and altitude. Customized Soundproofing Solutions Everything you need customized in a single package In-flight acoustical analysis of your cabin’s sound levels to customize the best solution From a team you can trust All divisions are supported by an in-house team of DERs and DARs that efficiently respond to our diverse customer base including major OEMs, completion and modification centers, as well as private aircraft owners and upholstery shops. Don’t take our word for it. Our final step in customizing a soundproofing package is to quantify the results with a second sound frequency analysis. The following graphs demonstrate quantified success generating major sound reduction results while adhering to cost, weight and other aircraft-specific parameters and considerations. Silence starts with Skandia Take advantage of Skandia’s engineered approach and applications experience to meet your noise reduction and comfort goals. Aircraft Soundproofing Solutions The solutions starts with the finest materials • Radiant panel certified thermal & acoustic materials • Comprehensive selection of aircraft thermal/acoustic materials including insulation strip blankets, overframe blankets and carpet padding • All Skandia soundproofing solutions meet the radiant panel flammability test for part 25 aircraft, 14 CFR 25.856(a) • Complete soundproofing systems for more than 80 different aircraft 3 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Aircraft Soundproofing Solutions dB(SIL) The dB(SIL) rating scale measures the difficulty of hearing speech, averaging the 1000, 2000 and 4000 Hertz frequencies. This scale is indicative of the sound levels that are perceived as most annoying to the human ear. dB(A) The dB(A) rating scale measures the overall perception of loudness across the entire audible frequency range. This scale is weighted to diminish the value of lower frequencies and therefore, follows closely the frequency response of the human ear to sound. A 3 - 5 dB(SIL) reduction is equivalent to a 50% perceived reduction. 4 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Beechcraft King Air Series Recorded dB(SIL) 50 55 60 65 70 75 dB(A) dB(A) POST King Air Series Recorded dB(A) 70 75 80 85 Original Skandia System Original Skandia System dB(SIL) Reduction: 2.4 dB(A) Reduction: 1.4 Bombardier Challenger 605 db (A) 90 85 80 75 70 65 Challenger 605 db (SIL) 75 70 65 60 55 50 dB(SIL) dB(SIL) POST Original Skandia System Original Skandia System dB(A) Reduction: 4.9 dB(SIL) Reduction: 3.1 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft KING AIR 200-300 MODELS CHALLENGER 600 SERIES 5 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Bombardier 45 50 55 60 65 70 Global Express SN1919 Db(Sil) dB(SIL) dB(SIL) POST 90 85 80 75 70 65 60 Global Express SN1919 Db(A) Original Skandia System Original Skandia System dB(SIL) Reduction: 3.5 dB(A) Reduction: 5.0 Lear 35 Db(A) 95 90 85 80 75 70 Lear 35 Db(SIL) dB(SIL) dB(SIL) POST 80 75 70 65 60 55 Original Skandia System Original Skandia System dB(A) Reduction: 2.4 dB(SIL) Reduction: 3.3 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft GLOBAL SERIES LEAR 35 6 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com 90 85 80 75 70 65 60 Citation 650 Db(A) 50 55 60 65 70 75 Citation 650 Db(SIL) dB(SIL) dB(SIL) POST Forward Mid-Cabin Aft Original Skandia System Original Skandia System dB(A) Reduction: 2.5 dB(SIL) Reduction: 4.3 Cessna Dassault Falcon 20 Db(A) 95 90 85 80 75 70 65 Falcon 20 Db(SIL) dB(SIL) dB(SIL) POST 55 50 60 65 70 75 80 Original Skandia System Original Skandia System dB(A) Reduction: 7.5 dB(SIL) Reduction: 9.0 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft CITATION 650 FALCON 20 7 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Dassault Falcon 50 Db(A) 85 80 75 70 Falcon 50 Db(SIL) dB(SIL) dB(SIL) POST 70 65 60 55 50 Original Skandia System Original Skandia System dB(A) Reduction: 4.8 dB(SIL) Reduction: 4.8 Falcon 900 Db(SIL) dB(SIL) dB(SIl) POST 45 50 55 60 65 70 75 80 Original Skandia System Original Skandia System dB(A) Reduction: 5.7 dB(SIL) Reduction: 4.4 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft FALCON 50 FALCON 900 SERIES 8 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Dassault Falcon 2000 Db(A) 90 85 80 75 70 65 Falcon 2000 Db(SIL) dB(A) dBA) POST 50 55 60 65 70 75 Original Skandia System Original Skandia System dB(A) Reduction: 2.1 dB(SIL) Reduction: 5.0 Gulfstream Gulfstream GIV Db(A) 75 70 65 Gulfstream GIV Db(SIL) dB(SIL) dB(SIL) POST 65 60 55 50 45 Original Skandia System Original Skandia System dB(A) Reduction: 5.0 dB(SIL) Reduction: 8.7 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft FALCON 2000 GIV 9 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Gulfstream 90 85 80 75 70 65 60 Gulfstream G550 Db(A) Gulfstream G550 Db(SIL) dB(SIL) dB(SIL) POST 70 65 60 55 50 45 40 35 30 Original Skandia System Original Skandia System dB(A) Reduction: 2.1 dB(SIL) Reduction: 4.3 Hawker Hawker 800 Db(A) 85 80 75 70 Hawker 800 Db(SIL) dB(SIL) dB(SIL) POST 70 65 60 55 Original Skandia System Original Skandia System dB(A) Reduction: 4.8 dB(SIL) Reduction: 5.5 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft GULFSTREAM G550 HAWKER 800 10 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Hawker 1000Db(A) 90 85 80 75 Hawker 1000Db(SIL) dB(SIL) dB(SIL) POST 90 85 80 75 70 65 60 55 Original Skandia System Original Skandia System dB(A) Reduction: 1.3 dB(SIL) Reduction: 2.8 Hawker Israeli Aircraft 75 70 65 60 Westwind 1124 dB(SIL) dB(SIL) dB(SIL) POST 85 80 75 70 Westwind 1124 dB(A) Original Skandia System Original Skandia System dB(A) Reduction: 4.5 dB(SIL) Reduction: 5.1 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft HAWKER 1000 WESTWIND 1124 11 800/945-7135 • 815-393-4600 • I nfo@SkandiaInc.com Mitsubishi MU- 2 Long dB(A) 95 90 85 80 75 70 MU-2 Long db (SIL) dB(SIL) dB(SIL) POST 75 70 65 60 55 Original Skandia System Original Skandia System dB(A) Reduction: 4.6 dB(SIL) Reduction: 5.5 Pilatus 70 75 80 85 90 PC-12 Recorded dB(A) 70 65 60 55 50 dB(A) dB(A) POST PC-12 Recorded dB(SIL) Original Skandia System Original Skandia System dB(A) Reduction: 2.6 dB(SIL) Reduction: 3.3 Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft Forward Mid-Cabin Aft MU-2 LONG PILATUS PC-12 •1• WIRE PIN SAW MANUAL FOR DIFFICULT, ACCURATE AND REPEATABLE FOAM PATTERN CUTTING GREATLY ENHANCES SPEED AND REDUCES WASTE •2• This manual has been prepared for the owner and those respon- sible for the operation of the Skandia, Inc. Wire Pin Saw. PLEASE NOTE: Your machine has been fully assembled, tested, operated and broken down for packaging to ensure that you have re- ceived a high quality product. The purpose of this manual, aside from machine operation, is to promote safety through the use of accepted correct assembly and operating procedures. Read this manual thoroughly before assembling or operating the machine. In order to obtain maximum life and efficiency from your Wire Pin Saw and to aid in operating and maintaining the machine with safety, read this manual thoroughly and follow all instruc- tions carefully. The specifications put forth in this manual were in effect at the time of publication. However, owing to Skandia’s policy of con- tinuous improvement, changes to those specifications may be made at any time without obligation on the part of Skandia, Inc. The information and recommendations contained in this publi- cation come from sources believed to be reliable and to repre- sent the best current practice. Skandia, Inc. does not intend this manual to be a complete course of instruction on how to use this machine with safety and does not guarantee or represent that the information is absolutely correct or sufficient. In addition, it cannot be assumed that all acceptable safety measures are listed or that other additional measures are not needed under particu- lar or exceptional circumstances or conditions. INTRODUCTION •3• Read, understand and follow the safety and instruction manual. Know the limitations and hazards associated with the Wire Pin Saw. Adjust blade guard to approximately 1” above cutting piece. The motor is thermally protected with a manual reset. Be sure 110 Volt receptacle is property grounded. Use safety shield, goggles or glasses that are approved to protect eyes during machine operation. Remove or fasten all loose clothing such as neckties, sleeves, etc. Confine long hair. Remove rings, watches, bracelets or other jewelry. Keep the floor around the machine clean and free from scraps, oil or grease to minimize the danger of slipping. Give the work you are doing all your attention. Horseplay and carrying on a conversation can cause injury. When leaving the machine area or making adjustments, turn the machine off and wait until all moving parts stop. Before performing any service or maintenance or when changing the blade be sure the power is off. Use only Skandia, Inc. or factory authorized replacement parts and accessories; otherwise the warranty and guarantee is null and void. Do not use the Wire Pin Saw for anthing other than its intended use. If used for other purposes, Skandia disclaims any real or im- plied warranty and holds itself harmless for any injury which may result from that use. Read, understand and follow the safety and instruc- tion manual. Know the limita- tions and hazards associated with the Wire Pin Saw. DANGER SHARP BLADE SAFETY INSTRUCTIONS •4• 1. Bolt mainframe to stand using (4) -16 x HH bolts and (4) lock washers 2. Mount table with (2) table shafts (items #7). Start shaft through each side, slide lock collar onto each shaft before inserting shaft into inside frame rail. Do not lock collars in place yet. 3. Remove table locking handle (item #17) to attach table locking bar (item #6). 4. Bolt table guide mounting tube (item #10) onto support angle using (5) ¼-20 x ½ HH bolts and (5) lock washers. 5. Mount safety light (item #40) using (2) #8-32 x screws and (2) 8-32 nuts. Plug in connector wire. 6. Mount angle dial mounting plate (item #14, 16) to bottom of table guide mounting tube (item #10). Adjust indicator to zero. 7. Remove table tie plate (item #12). Install wire blade (direc- tional arrow) through table slot, wrap wire over top wheels, then lower right, lower wheel. Be certain the wire is in the groove on the three pulleys before turning the wire over the drive pulley. To test blade tension, place hook of wire of wire tension gauge (WTG) onto wire blade an inch above the table surface. Pull the wire by using the WTG to the line on the table insert (item #5). Rotate pulley while adjusting ten- sion screw. WTG needs to indicate between 6 and 7 pounds. Tighten bolts in adjusting plate and tension screw jam nut. 8. Adjust table to align wire through center of table insert— plain (item #5). Push lock collars against uprights (items #8, 9) and lock set screws. Then, lock the set screws on the table frame, locking the shaft. 9. Set up vacuum inside frame stand. Route hose between mainframe and table. Secure hose in place on hoop and loop strips. Hose can be removed quickly to clean machine. 12 7 17 5 7 14 8 16 6 10 40 9 DANGER CAUTION ASSEMBLY INSTRUCTIONS See the last page of this manual for large detailed drawing. •5• 1. Remove table tie plate (item #12). 2. Install wire blade (directional arrow) through table slot, wrap wire over top wheels, then lower right, lower wheel. Be certain the wire is in the groove on the three pulleys before turning the wire over the drive pulley. 3. Test blade tension by placing hook of wire tension gauge (WTG) onto wire blade an inch above the table surface. Pull the wire using the WTG to the line on the table insert (item #5). Rotate pulley while adjusting tension screw. The WTG needs to indicate between 6 and 7 pounds (see illustration below). 4. Tighten bolts in adjusting plate and tension screw jamnut. WIRE BLADE INSTALLATION INSTRUCTIONS WTG Skandia Wire Tension Guide 1" 0 1 2 3 4 5 6 7 •6• A. MOTOR The 1 HP (horsepower), 110 volt motor was specifically designed and manufactured to be used on the Wire Pin Saw. The motor is equipped with a soft start to give you increased life and service of your wire blade and is equipped with a manual reset for safety. The motor is a TEFC (totally enclosed fan cooled) so you can operate your saw in an industrial or dusty environment. Please note—since this motor was custom-made for your Wire-Pin Saw, it is highly recommended that you use only Skandia-authorized replacement parts. B. BLADE GUARD For safe operation, the blade guard must be in proper position. It is equipped with a friction lock so that the guard can be lowered or raised. Keep guard adjusted as low as possible allowing clear- ance for your work piece. C. TABLE ADJUSTMENT The table work service is mounted onto welded steel tubing and has a melamine top. To provide extra stability when the table is straight and level it has a positive lock to secure table down. The table may be tilted up to a 45-degree angle by adjusting the fric- tion lock. To gauge the angle of the table an Inclinometer (angle indicator item #16) is attached to the side of the table. D. FENCE Standard equipment is a simple lift off Biesemeyer T-square that can go inside or outside of the wire blade. This adds for ease in cutting because you can cut from the right or the left. There is an optional “fence extension” that may be purchased to improve the cutting of taller pieces. Please see OPTIONS for more details. E. LUBRICATION The bearings in the pulleys are sealed for life, requiring no lu- brication. Except drive bearings (item #42) need to be greased according to hours of operation, temperature, moisture and dirt. It is recommended that inspection is made at least every six months. The slides and adjusting screws should be lubricated at regular intervals with lightweight oil to insure proper operation. OPERATING INSTRUCTIONS •7• Skandia warrants the equipment manufactured by Skandia, and not by others, to be free from defects in workmanship and material under normal use and service for a period of six months from date of delivery. This shall not include wire blades and/or preventative maintenance parts required for normal operation. Use or service with corrosive or abrasive chemicals or materials is not deemed normal. Upon written notice from Purchaser specify- ing the particular defect or defects, Skandia will correct without charge any workmanship which is demonstrated to Skandia’s satisfaction to have been defective prior to installation and will repair or replace without charge f.o.b. Skandia, parts which upon inspection are found defective under normal use within the war- ranty period stated above. All work of removal and reinstallation or installation of parts, whether or not found defective and ship- ping charges for defective or replacement parts shall be at the sole expense of Purchaser. This warranty shall not apply if installation is not performed under Skandia approved methods. Skandia shall not be liable for consequential damages of any kind which occur during equipment installation or which result from the use or misuse of Purchaser, its employees or other of the equipment supplied hereunder. Purchaser’s sole and exclusive remedy against Skandia for any breach of the foregoing warranty shall be valid and binding upon Skandia only if Purchaser operates and maintains the equipment and supplies hereunder in accordance with the instruction manual to be provided upon delivery of the equip- ment. Skandia does not warranty or guarantee the rate and quality of performance of the equipment herein specified, the process of manufacture, or the quality of the product to be pro- duced by the equipment supplied hereunder, and Skandia shall not be liable for prospective profits. THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES AND SPECIFI- CALLY THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABIL- ITY OF FITNESS FOR A PARTICULAR PURPOSE. SKANDIA SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES WHATSOEVER WITH RESPECT TO EQUIPMENT MANUFACTURED OR SUPPLIED BY, OR SERVICES RENDERED BY SKANDIA. WARRANTIES AND LIMITATIONS •8• Skandia’s exclusive Wire Pin Saw is designed to cut a variety of foam cut patterns prior to assembly into a finished product. We understand that there will be cases where cuts will be necessary after partial or final assembly of a cushion. Cutting parts that are already glued will cause glue to deposit on the surface of the cut- ting wire, and consequently in the grooves of the guiding wheels. Glue build-up will eventually produce excessive vibration of the wire and uneven cutting. We recommend cleaning the wire after every job that includes cutting parts that have been glued. Doing this will control the frequency of total cleaning and the resulting down time. Use the Cleaning Stick as soon as possible after you finish cutting to pre- vent the glue from hardening. Rotate the wire by hand while mov- ing the Cleaning Stick up and down to “scrub” the wire. Remove glue balls as they form on the Cleaning Stick. Should it be necessary to do a complete cleaning of the Pin Saw, the following steps should be followed: WARNING Replacement of wheels damaged by improper clean- ing are the sole responsibility of the owner/operator. 1. DISCONNECT all power to the saw. 2. OPEN GUARD DOORS Vacuum inside saw to remove all dust from guide wheels and wire. 3. ROTATE THE BLADE by hand and apply Citrus Cleaner directly to the entire wire. Allow the cleaner to soak in to the wire and the wheels for at least 30 minutes. Longer soaking time makes glue easier to remove. 4. CLEANING THE WIRE Rub the cleaning stick up and down the wire, one section at a time. Grip the wire using a scrap piece of foam or a rag. Clean one section, then rotate wire and clean the next section. Continue until the entire wire has been cleaned. 5. CLEANING THE WHEELS Be sure to clean the groove on the wheels. CAUTION: Observe the following rules to avoid damage to the wheels: A. DO NOT USE SHARP TOOLS The wheels are made with a relatively soft urethane and can be easily damaged when sharp, metal objects are used to clean the wheel. PIN SAW CLEANING INSTRUCTIONS •9• B. WHEN THE GLUE HAS SOFTENED, use the supplied groove cleaning tool to gently remove built up glue and foam from both the sides and bottom of the groove. DO NOT APPLY ENOUGH PRESSURE TO SCRATCH THE SUR- FACE OF THE GROOVE OR WHEEL. DOING SO MAY RESULT IN PERMANENT, IRREPARABLE DAMAGE TO THE WHEEL. C. CAUTION Damaged wheels can not be repaired. Apply the minimum amount of pressure required to remove any built up glue and foam. 6. RECONNECT power to the machine and let the wire run gently along the side of the Cleaning Stick. Any remaining glue on the wire should start to come off as it rubs against the Cleaning Stick. IN EXTREME CASES OF GLUE BUILD-UP, we recommend the following procedure: 1. DISCONNECT all power to the saw. 2. OPEN GUARD DOORS and vacuum inside saw to remove all dust from guide wheels and wire. 3. RELEASE TENSION on the wire and remove it. 4. PLACE WIRE in a container with enough glue solvent to cover wire and soak until glue is dissolved. 5. CAREFULLY CLEAN groove on the wheels according to above instructions and warnings. Do not use sharp tools. 6. REPLACE WIRE with cleaned or new wire. To order more, please contact Skandia 815/393-4600: Cleaning Stick Item # SK158 Cleaning Tool Item # 259-961 (for wheel groove) Wire Blade Item # SKPINSAWIRE Replacement Citrus-based cleaners are available at most hardware and lumber yards. PIN SAW CLEANING INSTRUCTIONS 259-961 •10• PARTS LIST 1. 252-200 Base Frame Weldment 2. 251-100 Main Frame Weldment 3. 253-350 Table Weldment 4. 253-351 Table Top 5. 253-305 Table Top Insert-Plain 6. 253-306 Table Locking Bar 7. 253-307 Table Shaft 8. 253-308 Table Support (Locking) 9. 253-309 Table Support 10. 253-352 Table Guide Tube 11. 253-353 Table Guide Angle 12. 253-312 Table Tie Plate 13. 253-321 Table Insert Pin 14. 253-322 Angle Dial Plate 15. 259-923 Locking Collar 16. 259-922 Angle Indicator 17. 255-511 Table Locking Handle 18. 254-400 Motor Belt Guard 19. 254-401 Blade Guard 20. 255-500 Guard Assembly 21. 255-500 Guard Assembly Door 22. 255-507 Small Guard Door 23. 254-402 Bottom Blade Guide 24. 254-403 Top Blade Guide 25. 254-404 Blade Guard Lock 26. 259-917 Guard Boss 27. 259-919 Table Locking Clamp 28a. 256-601 Sheave Assy. Plain 28b. 256-610 Sheave Assy. w/Bearings 29. 256-603 Sheave Shaft Short 30. 256-604 Sheave Shaft Long 31. 256-605 Sheave Shaft Plate 32. 256-606 Sheave Adjust Plate 33. 256-607 Drive Shaft 34. 256-608 Motor Mounting Plate 35. 259-902 Drive Sheave 36. 256-602 Sheave Bearing Spacer 37. 256-609 Door Switch Guard 38. 259-911 Sheave Bearings 39. 259-910 Safety Switch 40. 259-909 Safety Light 41. 259-928 Start Stop Switch 42. 259-907 Drive Bearing 43. 259-904 Drive Belt 44. 259-905 Idler Pulley 45. 259-906 Drive Pulley 46. 259-918 Guard Locking Knob 47. 259-908 Wire Blade to reorder, reference SKPINSAWIRE 48. 259-914 Caution Sticker 49. 259-933 Caution Sticker 50. 259-915 Danger Sticker 51. 259-901 Motor 52. 259-924 Table Top Guide 53. 259-929 1/4SQ11/8LGKEY 54. 259-930 1/4SW7/8LGKEY 55. 259-931 3/16SQX13/8LGKEY 56. 259-932 Sheave Push Screw 259-950 Gas Spring 259-951 Ball Stud Bracket 259-952 End Fitting 259-953 Safety Clip ITEM PART DESCRIPTION ITEM PART DESCRIPTION 5000 North Highway 251, Davis Junction, IL 61020 I 800 945 7135 I www.skandiainc.com FlAMMABIlItY tEStING + CERtIFICAtION the Established leader In FAA-Recognized Flammability testing Services skandia’s flammability testing is performed by highly trained technicians utilizing state-of-the-art equipment. Rapid turnaround times result from our in-house staff of deRs and daRs with the authority to perform conformity inspections and issue 8110-3 flammability certifications. our comprehensive capabilities include 14 cFr 25.853(c) total fireblocking Program 14 cFr 25.853(a) Vertical and horizontal 12- and 60-second Composite Panel test to boeing specifications 14 cFr 25.856(a) Radiant Panel other 45˚ angle, 14 CfR 25.855(d) 60˚ wire, 14 CfR 25.869 and 25.1713(c) plus heat Release / smoke density / toxicity testing experienced staff deRs and daRs state-of-the-art equipment Re-qualify existing foam Cushions with new dress Covers test specimen fabrication / Conformity inspection / 8110-3 approval / similarity approvals Airbus & Boeing Approved Test Lab Worldwide OEM Approved Supplier Status 5000 North Highway 251, Davis Junction, IL 61020 I 800 945 7135 I www.skandiainc.com skandia’s experience as an aircraft interiors specialist has enabled our insider’s understanding of the aircraft refurbishment industry. from this foundation, skandia has emerged as a high quality supplier delivering products and services in an asaP environment. QualIty aSSurance our commitment to quality ensures that services are performed accurately and prod- ucts arrive at our customer’s dock on time with required documentation. teStIng Quick turnaround with faa-approval for flammability testing of aircraft interior mate- rials is achieved by skandia’s experienced staff and sophisticated testing equipment. full-time personnel include: qualified project coordinators, laboratory technicians and staff deRs and daRs with the authority to perform in-house conformity inspections and issue faa-approval for a broad range of tests. fIreblOckIng certIfIcatIOn test Plan generation / test Cushion fabrication / Conformity / inspection Vertical flammability on dress Covers / 8110-3 approval bunSen burner 12- and 60- second Vertical / horizontal / 45˚ angle / 60˚ wire expert cOnSultatIOn ServIce avaIlable test Plans / seat design / similarity approvals / Composite Panel materials selection / osu + smoke emission heat Release / smoke density / toxicity testing skandia will write the test plan while the specimens are sent to outside labs for testing. skandia will need a completed Composite Panel Checklist with appropriate paperwork and test specimens. FlAMMABIlItY tEStING + CERtIFICAtION Page 1 Flammability Testing & Certification Services A resource for Skandia customers to improve their Flammability and Certification experience Page 2 Experience the Skandia Difference www.flammability.skandiainc.com A single online resource providing you everything necessary to prepare for your flammability testing and certification. • Answers to ‘Frequently Asked Questions’ guiding you through preparation process. • Guidelines to understanding FAA Regulations 14 CFR 25.853 (a), (c) and (d) for Part 25 aircraft. • A comprehensive list of all necessary testing preparation checklists in an interactive format. Skandia’s online interactive resource allows you save your work progress and retrieve as needed. You and our engineering team will be provided a version of your project’s completed information for easy reference. Interactive Flammability Testing & Certification Services Resource Introduction Dear Valued Skandia Customer: This manual is designed to give guidance and understanding of FAA Regulations 14 CFR 25.853 (a), (c) and (d) dealing with Part 25 aircraft seat flammability requirements in layman terms. Skandia has also made available an online and interactive version of all the information and checklists you may need in preparing your flammability testing. The online resource can be found at: www.flammability.skandiainc.com. We consider this printed resource guide to be supplemental (yet identical and completely usable) to our online Flammability Testing & Certification Services tool. The online & interactive information allows Skandia customers to complete necessary checklist information, save progress and retrieve as needed, as well as provide you and our engineering team a version of your project’s completed information. In both versions of these resources, we have included