Cessna 182T NAV III Bold Face Emergency Procedures
CESSNA T182 T · Emergency Procedures
Overview
This document provides emergency procedures specifically for the Cessna 182T NAV III aircraft. It is designed for pilots and aviation enthusiasts to reference during critical situations. The procedures outlined are essential for handling various emergencies, including engine failures, fires, and electrical issues. Each procedure is concise and includes specific actions to take, ensuring that pilots can quickly respond to emergencies to maintain safety and control of the aircraft.
- Best glide speed during engine failure is 76 KIAS.
- Throttle control should be set to idle during takeoff roll engine failure.
- For fire during start, throttle should be full open and mixture to idle cutoff.
- In case of electrical fire, master switch must be turned off immediately.
- Maintain airspeed of 75 KIAS if engine fails immediately after takeoff.
Document
Source
Originally published by savannah.cap.gov. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Emergency Procedures
- Pages
- 1
- File size
- 59 KB
- Publisher
- savannah.cap.gov
Common. Rarer than 8% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the CESSNA T182 T.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
Free — save the RT182 Turbo Skylane RG to your watchlist and track it in one place.
More CESSNA T182 Tmanuals & documents
See all 15 →- Airworthiness Directive Schedule Aeroplanes Cessna 182 Series, R182, T182 Series and TR182Airworthiness Directives
- CAP TXWG Cessna 182T IntroductionOther Documents
- TECHNICAL SERVICE BULLETIN: 104688-000Maintenance Manual
- Single Engine SERVICE BULLETIN SEB-25-06Service Bulletins
- Rev: A Vizion Install Appendix F C182E-TWiring Diagram
- GFC 600 Autopilot in 182P/182Q/182R/T182/182S/182T/T182TFlight Manual
- CAWG Group 2- CAP C-182T Profiles GuideTraining Manual
- AFMS – GFC 500 Autopilot in Textron 182 SeriesNormal Procedures
- Garmin G1000 Cockpit Reference Guide for the Cessna Nav IIIV Speeds Reference
- CESSNA RESTART AIRCRAFT SERVICE BULLETIN SUMMARYService Bulletins
- BRS-182 Installation ManualSystems Description
- Maintenance ManualMaintenance Manual
If you fly the CESSNA T182 T, you may also be researching these.
In this document
Engine Fail During Takeoff Roll
In the event of an engine failure during the takeoff roll, pilots should immediately reduce throttle to idle and apply brakes to stop the aircraft.
Engine Failure Immediately After Takeoff
If the engine fails immediately after takeoff, maintain an airspeed of 75 KIAS. If flaps are set to 10°, the airspeed should be 70 KIAS.
Engine Failure During Flight
For an engine failure during flight, the best glide speed is 76 KIAS. Pilots should set the fuel selector valve to both, turn on the fuel pump, and set the mixture control to rich if a restart has not occurred.
Fire During Start on Ground
In case of a fire during engine start, the magnetos switch should be turned to start. If the engine fails to start, throttle should be set to full open, mixture to idle cutoff, and the fuel selector valve turned off.
Electrical Fire in Flight
For an electrical fire in flight, turn off the standby battery switch and master switch, close vents, and activate the fire extinguisher.
Safety notes
- Always follow emergency procedures promptly to ensure safety.
- Ensure that all switches are in the correct position during emergencies.
Full document text
Cessna 182T NAV III Bold Face Emergency Procedures ENGINE FAIL DURING T/O ROLL 1. Throttle Control – IDLE 2. Brakes – APPLY ENGINE FAIL IMMEDIATELY AFTER T/O Airspeed - 75 KIAS Flaps 70 KIAS Flaps 10° – Full ENGINE FAILURE DURING FLIGHT (Restart Procedures) 1. Airspeed - 76 KIAS (best glide speed) 2. Fuel Selector Valve - BOTH 3. Fuel Pump Switch – ON 4. Mixture Control - RICH (if restart has not occurred) FIRE DURING START ON GROUND 1. Magnetos Switch – START If engine fails to start 1. Throttle Control - FULL OPEN 2. Mixture Control - IDLE CUTOFF 3. Magnetos Switch - START (continue cranking) 4. Fuel Selector Valve - OFF PUSH DOWN & ROTATE to OFF 5. Fuel Pump Switch - OFF 6. Magnetos Switch - OFF 7. Stby Batt Switch - OFF 8. Master Switch (Alt&Bat) - OFF ENGINE FIRE IN FLIGHT 1. Mixture Control - IDLE CUTOFF 2. Fuel Selector Valve - OFF PUSH DOWN and ROTATE to... 3. Fuel Pump Switch -OFF 4. Master Switch (Alt&Bat) - OFF ELECTRICAL FIRE IN FLIGHT 1. Stby Batt switch - OFF 2. MASTER Switch (Alt&Bat) – OFF 3. Vents/Cabin Air/Heat - CLOSED 4. Fire Extinguisher – ACTIVATE CABIN FIRE 1. Stby Batt Switch - OFF 2. Master Switch (Alt&Bat) - OFF 3. Vents/Cabin Air/Heat - CLOSED 4. Fire Extinguisher - ACTIVATE WING FIRE 1. LAND and TAXI Light Switches – OFF 2. NAV Light Switch – OFF 3. STROBE Light Switch – OFF 4. PITOT HEAT Switch – OFF INADVERTENT ICING ENCOUNTER DURING FLIGHT 1. PITOT HEAT Switch – ON 2. Turn back or change altitude 3. Pull cabin heat control full out and rotate defroster control clockwise STATIC SOURCE BLOCKATE (Erroneous Instrument Reading Suspected) 1. ALT STATIC AIR Valve – PULL ON HIGH CARBON MONOXIDE (CO) LEVEL ANNUNCIATOR 1. CABIN HT Knob – OFF 2. CABIN AIR Know – ON 3. Cabin Vents – OPEN