Skip to main content

CESSNA RESTART AIRCRAFT SERVICE BULLETIN SUMMARY

CESSNA T182 T · Service Bulletins

Free account — keep the POHs & checklists you reference in one place.

Overview

This document is a summary of service bulletins for various Cessna aircraft, primarily focusing on the Cessna T182T. It outlines mandatory compliance requirements for specific maintenance tasks and inspections that are critical for the safety and airworthiness of the aircraft. The bulletins include details on inspections, modifications, and replacements that need to be performed, along with deadlines for compliance. This document serves as a reference for maintenance personnel and pilots to ensure that all necessary actions are taken to maintain the aircraft in optimal condition.

  • Mandatory compliance for listed service bulletins is required unless stated otherwise.
  • Parts and labor credit expires on the date published or at the end of the two-year warranty.
  • Specific bulletins for the Cessna T182T include elevator rivet inspections and fuel system modifications.
  • Regular inspections of critical components are essential for safety and airworthiness.
  • Compliance with service bulletins helps maintain the aircraft's performance and reliability.

Document

Source

Originally published by www.apraviation.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
Service Bulletins
Year
2004
Pages
7
File size
85 KB
Publisher
www.apraviation.com
How rare is it?
7CESSNA T182 T registered worldwide · 0 active

Common. Rarer than 8% of the aircraft models we track.

Documentation completeness
3/7

Most owners only have the POH. Here's the essential set for the CESSNA T182 T.

More CESSNA T182 Tmanuals & documents

See all 15
Similar aircraft

If you fly the CESSNA T182 T, you may also be researching these.

In this document

Mandatory Compliance

The service bulletins listed in this document require mandatory compliance unless otherwise stated. This includes inspections and modifications that are critical for the safety and performance of the aircraft.

Service Bulletins Overview

The document lists several service bulletins, including those for the Cessna T182T, which cover various aspects such as pilot operating handbook revisions, inspections of critical components, and modifications to enhance safety.

Expiration of Parts and Labor Credit

It is important to note that parts and labor credit for compliance with these bulletins expires on the date published in the bulletin or at the end of the two-year aircraft warranty, whichever is later.

Specific Bulletins for Cessna T182T

The document highlights specific bulletins relevant to the Cessna T182T, including inspections of the elevator rivets and modifications to the fuel system, which are crucial for maintaining the aircraft's airworthiness.

Inspection and Modification Recommendations

Several bulletins recommend inspections and modifications, such as the elevator trim tab control cable inspection and the engine cowl flap rivet inspection, which are essential for ensuring the aircraft operates safely.

Safety notes

  • Failure to comply with mandatory service bulletins may result in safety hazards.
  • Ensure all inspections are completed within the specified timeframes to maintain airworthiness.

Full document text

CESSNA RESTART AIRCRAFT SERVICE BULLETIN SUMMARY As of 7-5-04 Mandatory compliance unless stated otherwise Notice - All bulletins: parts and labor credit expires on date published in bulletin or end of two year aircraft warranty, which ever is later. 04 Service Bulletins SB04-11-01 Pilot’s operating handbook and checklist rev. T/206H 3-01-04 SB04-24-01 Alternator control unit inspection/replacement 172/182/206series 3-01-04 SB04-25-01R1 Crew seat recline modification 172/182/206series 6-14-04 SB04-25-02 Crew seat back cyl. lock insp. & crank arm mod. 172/182/206series 6-14-04 SB04-27-01R1 Elevator rivet inspection T/182T 4-26-04 SB04-27-02 Elevator trim tab control cable inspection 172R-S 4-12-04 SB04-28-01R1 Fuel hose inspection 172R-S 4-05-04 SB04-28-02 Fuel strainer installation inspection T/182T 5-10-04 SB04-32-01 NLG shock strut metering pin replacement 172R-S 2-02-04 SB04-52-01 Security lock installation 172/182/206series 6-28-04 Optional SB04-53-01 Bulkhead rivet inspection T/206H 3-01-04 SB04-55-01 Horizontal stabilizer attach bolt holes inspection 172R-S 4-12-04 SB04-71-01 Engine cowl flap rivet inspection T/182T 4-26-04 Recommended 04 SB total 13 03 Service Bulletins SB03-11-01 Pilot’s operating handbook and checklist rev. 206H 2-17-03 SB03-11-02 Pilot’s operating handbook and checklist rev. 172R 4-14-03 SB03-11-03 Brazilian pilot’s operating handbook revision 206H 6-23-03 SB03-11-04 Pilot’s operating handbook and checklist rev. 172R-S 10-27-03 SB03-23-01 Honeywell KMA26 audio panel modification 172/182/206series 7-28-03 Recommended SB03-24-01 Alternator replacement 172/182/206series 7-28-03 Recommended SB03-24-02 MC01-3A main electrical power “J” box mod. 172/182/206series 10-13-03 Recommended SB03-25-01 Armrest shield installation 172R-S 2-03-03 Optional SB03-27-01 Flap actuator motor inspection T/182T 9-29-03 SB03-27-02 Flap control bracket attach bolts replacement 172/182/206series 12-22-03 SB03-28-01 Fuel cap lanyard removal 172/182/206series 10-27-03 Optional SB03-32-01 Nose landing gear wheel fairing modification 172/182/206series 9-29-03 Optional SB03-34-01 Honeywell KS 270,271,272 C servo friction insp. 172/182/206series 10-27-03 Recommended SB03-34-02R1 Altimeter inspection 172/182/206series 2-16-04 SB03-37-01 Vacuum manifold inspection/replacement 172/182/206series 11-10-03 SB03-53-01 Aft cabin stringer inspection T/182T 5-26-03 SB03-53-02R1 Lower cabin doorpost to MLG spring insp. T/206H 6-23-03 SB03-53-03R1 NLG fairing attachment inspection T/182T 3-15-04 SB03-71-01 Engine fuel supply system modification 172R-S 5-26-03 Optional SB03-71-02 Fuel injection servo inspection 172/182series 5-26-03 SB03-73-01 Throttle arm retention inspection 172/182/206series 11-4-03 03 SB total 21 02 Service Bulletins SB02-11-01 Pilot’s operating handbook revisions T182T 1-21-02 SB02-11-02 Pilot’s operating handbook revisions 182S 1-21-02 SB02-11-03 Pilot’s operating handbook revisions T/206H 5-13-02 SB02-11-04 Pilot’s operating handbook revisions T/206H 9-30-02 SB02-22-01 Honeywell KAP 140 autopilot system mod. 172/182/206series 11-25-02 AD2003-24-13 SB02-25-01 Pilot and copilot shoulder harness guide removal 172/182/206series 4-29-02 Optional SB02-28-01R1 Fuel line inspection T/182T 12-16-02 SB02-34-01 Goodrich WX-500 weather mapping sensor mod. 182/206series 11-25-02 Optional SB02-37-01 Vacuum system reducer fitting replacement T/182T 1-21-02 SB02-37-02 Dry vacuum pump and coupling replacement 172/182/206series 2-18-02 SB02-37-03 Vacuum system reducer fitting replacement 172/182/206series 2-18-02 Recommended SB02-37-04 Airborne air & fuel products check valve manifold 172/182/206series 10-28-02 SB02-52-01 Cabin door handle replacement 172/182/206series 1-21-02 SB02-53-01 Fuselage ballast weight installation T/182T 9-02-02 Optional SB02-53-02 Firewall sealant installation 172R-S 12-16-02 SB02-55-01 Elevator rivet installation 182 series 10-14-02 Recommended SB02-61-01 Propeller spinner and bulkhead inspection 172R-S 1-21-02 Recommended SB02-61-02 Propeller blade inspection 172R-S 12-16-02 SB02-71-01 Engine cylinder drain can installation T/206H 8-05-02 Optional SB02-71-02 Engine crankshaft core sample inspection T206H 9-23-02 SB02-71-03R2 Engine crankshaft gear retaining bolt replacement 182S, T/206H 5-10-04 AD2002-23-06 SB02-71-04 Engine induction system fuel overboard drain T182T 11-25-02 Optional SB02-71-05R1 Engine oil pump plug inspection T182T, T/206H 2-03-03 02 SB total 23 01 Service Bulletins SB01-11-01 Pilots operating handbook revisions 172/206series 2-05-01 SB01-11-02 Pilots operating handbook revisions 172R-S 3-05-01 AD2001-06-17 SB01-11-03 Airplane wt. & bal. And installed equip. T206H 6-25-01 SB01-11-04 Pilots operating handbook revisions T/206H 7-23-01 SB01-25-01 Glareshield shroud installation 182/206series 12-24-01 SB01-27-01R1 Elev. trim tab control cable stop block insp. 172S 2-19-01 SB01-27-02 Control yoke assembly inspection 172R-S 5-28-01 SB01-28-01 Fuel selector shaft assy. insp/mod. T/206H 1-22-01 SB01-28-02 Fuel selector shaft assy. insp/replacement 172R-S 5-28-01 SB01-28-03 Fuel shut-off valve contro cable inspection 172R-S 7-23-01 SB01-28-04 Fuel quantity level sender/transmitter insp. T/182T-S 10-01-01 SB01-28-05 Fuel line inspection T/206H 12-24-01 SB01-34-01 Com antenna replacement T/182T 9-03-01 SB01-53-01 Battery box support insp/mod 172R-S 2-05-01 Optional SB01-53-02 Battery box tray liner installation T/206H 9-03-01 SB01-55-01 Elev. Balance wt. attach screw insp/install 172R-S 4-02-01 Recommended SB01-71-01 Engine fuel flow divider installation mod. 172R-S 1-22-01 Optional SB01-71-02 Engine crankshaft inspection 172R-S 4-02-01 SB01-71-03 Engine turbocharger mounting bracket bolt T182T 8-20-01

Show full text

SB01-71-04 Engine oil filler tube replacement/modification T/206H 10-29-01 SB01-73-01 Engine driven fuel pump inspection 172R-S/182S/206H 5-28-01 SB01-73-02 Engine driven fuel pump relief valve housing repl. T206H 9-17-01 SB01-74-01 Ignition switch center ground terminal insp. 172/182/206series 6-25-01 Recommended 01 SB total 23 00 Service Bulletins SB00-11-01 German pilots operating handbook revision 172R 3-13-00 SB00-11-02 POH rev.1 T206H 4-24-00 SB00-11-03 POH rev.4 172R 5-22-00 SB00-11-04 POH rev 1 172S 8-14-00 SB00-11-05 POH rev 3 182S 12-26-00 SB00-22-01 KAP-140 autopilot servo insp/mod 172/182/206series 2-14-00 AD2000-05-24 SB00-24-01 Main power j-box C/B retrofit kit install 172/182/206series 3-13-00 Recommended SB00-24-02 Electical panel wiring mod. 172/182/206series 6-05-00 SB00-25-01 Engine winterization Kit installation 206H 1-31-00 SB00-27-01R1 Lwr. fwd.elevator control cable pulley brack. 182S 8-28-00 SB00-27-02R1 Aileron control cable quadrant insp/mod. 182S/206series 11-06-00 SB00-32-01 NLG strut brace & drag link clearance insp. T/206H 11-20-00 Recommended SB00-34-01 Pitot tube heater assy. insulation installation 172/182/206series 4-10-00 SB00-37-01 Vacuum system air filter element insp/replace 172/182/206series 8-14-00 Recommended SB00-53-01R1 Center Cabin Rivet insp/installation 182S 8-14-00 SB00-53-02 Rivet inspection/installation T/206H 6-12-00 SB00-55-01 Rudder Attach bolt torque inspection 172R-S 4-10-00 Recommended SB00-55-02 Elevator trim tab modification T/206H 7-31-00 SB00-55-03 Horizontal stabilizer reinforcement insp/mod T/206 8-28-00 AD2001-09-06 SB00-57-01R1 Flap track and wing inbrd trailing edge insp. 172R-S 4-28-03 Recommended SB00-61-01 Propeller governor control cable routing mod. T/206H 7-03-00 Recommended SB00-61-02 Propeller hub inspection 172R-S 8-14-00 SB00-73-01R2 Engine fuel injection lines and support clamps 172/182/206series 12-24-01 AD2002-26-01 SB00-79-01R1 Engine low oil pressure switch replacement 172/182/206series 2-21-00 AD2000-04-01 00 SB total 24 99 Service Bulletins SB99-11-01 POH rev. 3 172R 9-27-99 SB99-11-02 German POH rev. 1 182S 9-27-99 SB99-21-01 Fresh air vent replacement 172/182/206series 3-15-99 Optional SB99-24-01 Electrical power system mod. 172R-S/182S 3-15-99 SB99-24-02 Circuit panel assy cover installation 172/182/206series 12-27-99 Recommended SB99-25-01R1 ELT operational test 172/182/206series 12-27-99 SB99-27-01 Control yoke pivot bolt insp/replacement 172R 7-12-99 AD99-18-14 SB99-28-01 Wing fuel tank vent check valve inspection 172/182/206series 4-26-99 SB99-32-01 Brake torque plate inspection 182S 5-10-99 SB99-34-01R1 KLN 89B GPS Nav sys. Mod. 172/182/206series 4-24-00 SB99-37-01 Vacuum hose modification 172/182/206series 12-27-99 Recommended SB99-53-01 Firewall doubler inspection 182S 3-08-99 SB99-53-02 Tailcone skin installation inspection 182S 4-26-99 SB99-53-03R1 Elev. Control yoke engagement insp/mod. 172R-S 7-28-03 SB99-55-01 Vertical fin aft spar inspection 172R-S 3-29-99 SB99-71-01R2 Engine piston pin plug inspection 172R-S/182S 7-12-99 Recommended SB99-71-02 Engine oil filler tube to eng mount clearance 172R-S 7-12-99 Optional SB99-71-03 Engine exhaust to baffle clearance 206H 8-16-99 SB99-71-04 Alternate air door hinge assy insp/rep. T/206H 9-13-99 SB99-71-05 Engine valve seat inspection 172/182/206series 10-25-99 SB99-71-06 Tailpipe Lanyard install and F/F transducer T206H 12-06-99 SB99-73-01R1 Engine fuel manifold spring replacement 172/206series 9-30-02 Recommended SB99-73-02 Engine fuel injector unit inspection 172R 2-01-99 Recommended SB99-73-03 Engine fuel pump relief valve cover screws T206H 9-13-99 99 SB total 24 98 Service Bulletins SB98-11-01 Voltage polarity placard 172R 3-23-98 SB98-11-02 POH Rev. 2 172R 3-30-98 SB98-11-03 POH Rev. 2 182S 5-04-98 SB98-11-04 Muffler inspection placard 182S 8-24-98 SB98-11-05 German POH rev. 1 & 2 172R 9-21-98 SB98-11-06 Brazil POH rev. 1 172R 10-12-98 SB98-11-07 Brazil POH rev. 1 182S 10-12-98 SB98-20-01R1 Firewall sealant replacement 172R/182S 12-31-98 SB98-22-01 KAP-140 dual axis auto pilot mod 182S 5-18-98 SB98-22-02R2 KAP-140 dual axis auto pilot limitation 182S 2-01-99 SB98-24-01 Alternator replacement 172R/182S 3-30-98 SB98-25-01 Crew seatback pivot fitting insp. 172R/182S 6-01-98 SB98-25-02 Seat roller inspection 172R/182S 9-14-98 SB98-27-01 Flap follow up system 172R 3-30-98 SB98-27-02R1 Aileron cable routing 172R 12-31-98 AD98-13-41 SB98-27-03 Aileron cable clamp insp. 172R 6-01-98 AD98-13-41 SB98-27-04 Control column screw insp. 182S 6-01-98 SB98-27-05R2 Right wing aileron cable insp. 172R 12-31-98 AD98-13-41 SB98-27-06 Flight control cables and travel 172R/182S 6-15-98 AD98-13-41 SB98-27-07 Control yoke bushing 172R 9-21-98 SB98-28-01 Engine fuel transducer 172R/182S 3-02-98 SB98-28-02R1 Fuel hose clamp inspection 172R 2-01-99 SB98-28-03 Fuel shut off clamp 172R 5-04-98 SB98-34-01R1 KLN 89B GPS limitation 172R/182S 8-03-98 SB98-37-01R1 Airborne vacuum pump insp. 172R-S/182S 3-08-99 AD98-23-01 SB98-52-01 Baggage door seal replacement 172R 2-23-98 SB98-53-01R1 Firewall rivet inspection 172R 12-14-98 SB98-53-02R2 Firewall inspection 172R 12-26-00 SB98-55-01 Elevator stop bolt nutplate replace. 172R 7-06-98 SB98-55-02 Horiz. stab inbrd skin rivet inspect. 172R 7-27-98 SB98-55-03 Horiz. Stab fwd inbrd rib inspection 182S 11-30-98 SB98-57-01 Wing strut attach bolt torque insp. 172R 6-01-98 SB98-71-01 Heat shroud fwd. Baffle 172R 7-27-98 Optional SB98-71-02 Engine air filter replacement 172R/182S 7-27-98 Recommended SB98-78-01 Engine exhaust muffler insp. 172R 1-10-98 AD98-02-05 SB98-78-02R1 Engine exhaust muffler insp. 182S 12-14-98 AD98-13-10 SB98-78-03 Engine exhaust muffler replacement 182S 12-14-98 AD00-02-14 98 SB total 37 97 Service Bulletins SB97-11-01 POH Rev. 1 172R 5-12-97 SB97-11-02 POH Rev. 1 182S 7-01-97 SB97-11-03R1 Autopilot limitation placard 182S 9-21-98 SB97-11-04 Aft baggage placard 172R 11-03-97 SB97-11-05 Altimeter certification log. 172R/182S 12-15-97 SB97-22-01 KC 140 Sw imp. Errors 172R/182S 10-06-97 SB97-24-01 Wire bundle inspection 172R 12-15-97 SB97-24-02 Wire bundle inspection 182S 12-22-97 SB97-25-01 Aft bench seat weld 172R 8-11-97 SB97-26-01 Fire ext. mount bracket 172R/182S 12-22-97 SB97-27-01R1 Elevator and trim pulley 172R 12-14-98 SB97-28-01 Fuel strainer and tail pipe 172R 6-06-97 AD97-12-06 SB97-28-02 Fuel tank vent line 182S 11-17-97 SB97-33-01R1 Light dim module resistor 172R/182S 12-14-98 SB97-34-01 KLN 89 GPS app. Restrictions 172R/182S 7-02-97 SB97-34-02R1 Alt. static source valve 172R/182S 12-22-97 AD98-01-01 SB97-53-01 Fuselage bulkhead 172R 7-01-97 SB97-53-02R1 Lower. fwd. doorpost fastener 172R 11-30-98 AD98-14-07 SB97-71-01R1 Alt. air door hinge assy 172R/182S 7-27-98 SB97-71-02 Engine induction drain line 172R 12-22-97 SB97-78-01 Engine exhaust nut torque 172R/182S 8-11-97 SB97-78-02 Engine exhaust muffler replacement 182S 2-02-98 AD98-01-14 97 SB total 22 04 Special Service Project SSP04-11-01 Airplane identification data plate insp/repl. T182T 2-02-04 SSP04-11-02 Pilot’s operating handbook revision & sup 3 rev. 182T 7-05-04 SSP04-71-01 Engine cylinder drain line insp/mod. 206H 4-26-04 04 SSP total 3 03 Special Service Project SSP03-11-01 Fuel capacity placards replacement T206H 7-28-03 SSP03-27-01 Elevator control cable turnbuckles inspection 182S-T 11-10-03 SSP03-28-01 Fuel selector valve inspection/replacement 172R-S 8-18-03 SSP03-71-01 Engine oil pump inspection T/206H 6-23-03 03 SSP total 4 02 Special Service Project SSP02-11-01 Pilot’s operating handbook revision 172R 1-21-02 SSP02-22-01 KC 140 autopilot computer inspection 172/182series 9-16-02 Recommended SSP02-27-01 Control column universal joint inspection 172S 8-05-02 SSP02-53-01 Firewall sealant installation 172S 10-28-02 SSP02-71-01 Engine crankshaft replacement T206H 2-01-02 AD2002-04-51 E SSP02-71-02 Engine crankshaft replacement T206H 8-16-02 AD2002-19-03 02 SSP total 6 01 Special Service Project SSP01-11-01 POH revision 1 T/182T 6-18-01 SSP01-28-01 Wing-to-fuselage fuel hose and clamp insp. T/182T 7-23-01 SSP01-73-01 Engine fuel flow divider port plug torque insp. T182T 6-08-01 01 SSP total 3 00 Special Service Project SSP00-25-01 Headliner insulation insp./replacement T/206H 11-20-00 SSP00-32-01 Parker Hannifin brake cylinder insp/replace 172R-S 3-13-00 SSP00-57-01 Right wing spar cap stiffener inspection T/206H 9-11-00 SSP00-71-02 Textron Lyc. engine rocker and rocker cover T/206H 8-14-00 00 SSP total 4 99 Special Service Project SSP99-11-01 Altimeter certification logbook entry T206H 6-01-99 SSP99-11-02R1 Airplane identification data plate insp/replace T/206H 8-16-99 SSP99-11-03 Fuel selector valve placard replacement 172R-S 8-16-99 SSP99-25-01 French seat restraint system replacement 172R-S 9-27-99 SSP99-25-02 French seat restraint system replacement 182S 9-27-99 SSP99-27-01 Rudder trim control wheel inspect./replace 206H 3-29-99 SSP99-27-02 Aileron control bellcrank stop bolts insp. T/206H 5-18-99 99 SSP total 7 98 Special Service Project SSP98-78-01 Engine exhaust muffler insp. 172R 2-02-98 SSP98-78-02 Engine exhaust muffler reident. 172R 2-02-98 SSP98-78-03 Engine exhaust muffler replacement 182S 2-02-98 98 SSP total 3 97 Special Service Project SSP97-27-01 Elevator and trim pulley 172R 7-21-97 SSP97-28-01 Fuel system insp. 172R 2-24-97 SSP97-28-02 Fuel strainer and tail pipe 172R 7-21-97 SSP97-34-01 KLN 89B GPS cable 172R 9-01-97 SSP97-52-01 Cabin door latch 172R 7-21-97 SSP97-53-01 Lower. fwd. doorpost fastener 182S 9-15-97 SSP97-71-01 Eng. Crankcase breather 182S 11-20-97 SSP97-73-01 Eng. Fuel injector 172R 3-13-97 97 SSP total 8 S.N.L’s pertinent to restart aircraft SNL97-1 Cessna service information 172/182/206series 1-20-97 SNL98-4 KMA26 audio panel rack installation 172R/182S 5-04-98 SNL98-6 Starting procedures video 172R/182S 5-18-98 SNL98-13 Temporary revision numbering change 172/182/206series 12-31-98 SNL98-14 182S muffler AD alternate compliance 182S 12-23-98 SNL99-3 Propeller spinner and aft bulkhead install 172R-S 5-10-99 SNL99-6 Engine exhaust valve guide inspection 172/182/206series 6-01-99 SNL99-8 Wing tip installation procedures 172/182/206series 8-16-99 SNL99-9 Bendix/King Avionics upgrade 172/182/206series 9-13-99 SNL99-10 Heavy duty battery availability 172R-S/182S 9-13-99 SNL99-12 Engine control cable creep 172/182/206series 11-15-99 SNL99-13 Grounded braid chafe 172/182/206series 11-15-99 SNL99-14 Gyro handling ALL 11-15-99 SNL00-1 Heavy duty flap 172R-S 1-17-00 SNL00-3 POH-log of approved supplements 172/182/206series 1-17-00 SNL00-4 Static wick replacement 172R-S 1-31-00 SNL00-8 Vacuum pump gasket installation 172/182/206series 6-05-00 SNL00-9 Crew and Passenger seat belt restraint system 172/182/206series 7-03-00 SNL00-10 Cabin air and/or water leaks T/206H 8-14-00 SNL00-11 Approved nodestructive testing facilities ALL 8-28-00 SNL00-13 Cessna CD-ROM compatibility with MS ALL 11-20-00 SNL00-14 Cessna service information ALL 12-26-00 SNL01-1 Honeywell KLN 89/89B GPS Nav. Upgrade 172/182/206series 2-05-01 SNL01-4 Test box TE04 – supplemental instructions ALL 7-23-01 SNL02-3 Replacement instrument vacuum hose ALL 3-18-02 SNL03-3 Alternate propeller spinner installation 172R-S 3-05-03 SNL03-4 Heavy duty flap availability T/206H 3-17-03 SNL03-5 Winterization nose cap cover tape installation 172R-S 3-17-03 SNL03-8 Optional idle valve availability ALL 6-23-03 SNL03-10 Maintenance practices- handling of gyro instr. ALL 10-27-03 SNL03-11 Alternate turn coordinator availability T/182T 11-24-03 SNL’s total 31