AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft
Cirrus SR22T G6 · Service Bulletins
Overview
This Airworthiness Bulletin (AWB) addresses the issue of cracking found in the nose landing gear upper strut sections of Cirrus SR20 and SR22 aircraft. Issued on November 24, 2009, it highlights the importance of inspections and maintenance to ensure the safety and airworthiness of these aircraft models. The bulletin provides specific recommendations for operators and maintainers, emphasizing the need for detailed inspections and adherence to Cirrus Mandatory Service Bulletins related to the identified issue. The document serves as a critical communication tool for ensuring that operators are aware of potential safety concerns and the necessary actions to mitigate risks associated with the nose landing gear.
- Cracking has been reported in the nose landing gear upper strut sections of Cirrus SR20 and SR22 aircraft.
- Operators must inspect the fillet weld area between the upper gusset plate and attach point arms.
- SR20 inspections should follow Service Bulletin 2X-32-18 R4; SR22 inspections should follow 2X-32-19.
- Continued inspections are required at intervals specified in the service bulletins.
- All cracking instances must be reported to Cirrus and CASA.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at www.casa.gov.au. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Service Bulletins
- Year ·
- 2009
- Pages ·
- 2
- File size ·
- 70 KB
- Copy found at ·
- www.casa.gov.au
What is the AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft?
The AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft is a service bulletins for the Cirrus SR22T G6, dated 2009.
How many pages is the AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft?
The copy of the AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft on file runs 2 pages.
What year was the AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft published?
The AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft — the Cirrus SR22T G6 service bulletins on file — is dated 2009.
Common. More common than 99% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the Cirrus SR22T G6.
Cirrus SR22T G6 for sale now
Free — save the SR22T to your watchlist and track it in one place.
More Cirrus SR22T G6manuals & documents
See all 25 →- Cirrus SR22T G6 Model GuideModel Guide
- AVIATION SERVICE DOCUMENT NOTIFICATIONMaintenance Manual
- AAIB Bulletin: 5/2025Service Bulletins
- Airworthiness Directive Schedule Aeroplanes Cirrus SR20 and SR22Service Bulletins
- Airworthiness Directives for Cirrus SR22T G6Airworthiness Directives
- CIRRUS AIRCRAFT SR22T GTS G6Specifications
- 2022 G6 Cirrus SR22TSpecifications
- Cirrus SR2x Prebuy Examination—Scope and DetailChecklist
- INSTRUCTION – HEATER INSTALLATIONWiring Diagrams
- CTC Operating Procedures and GuidelinesAirworthiness Directives
- 2021 Cirrus SR22T G6 GTSSystems Description
- SR22TSpecifications
Related documents
- AIRWORTHINESS BULLETIN Cessna 150/152 Series Aircraft Horizontal Stabiliser Spar CrackingCessna 152 Aerobat · Service Bulletins
- SCHEDULE OF AIRWORTHINESS DIRECTIVESCirrus SR22T · Airworthiness Directives
- SCHEDULE OF AIRWORTHINESS DIRECTIVESCirrus SR22T · Airworthiness Directives
- Service Bulletin SB2X-76-05Cirrus SR20 · Service Bulletins
- Aviation Maintenance Alert - Cirrus SR20 and SR22 AircraftCirrus SR20 · Maintenance Manual
If you fly the Cirrus SR22T G6, you may also be researching these.
In this document
Applicability
This bulletin applies to Cirrus Design SR20 and SR22 series aircraft.
Purpose
The purpose of this AWB is to inform operators and maintainers about reports of cracking in the nose landing gear strut upper sections of both SR20 and SR22 aircraft.
Recommendation for SR20 Aircraft
Operators of SR20 aircraft are advised to conduct detailed inspections of the area around the fillet weld between the upper gusset plate and attach point arms, following the guidelines in Cirrus Mandatory Service Bulletin 2X-32-18 R4.
Recommendation for SR22 Aircraft
Operators of SR22 aircraft should perform similar inspections as outlined in Cirrus Mandatory Service Bulletin 2X-32-19 and reinforce the gear as per Cirrus approved repair item F.
Reporting
All instances of cracking should be reported to Cirrus and CASA through the Service Difficulty Reporting (SDR) System.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- Operators should ensure compliance with the recommended inspections to maintain safety.
- Failure to inspect could lead to further structural issues with the nose landing gear.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft Date : 24 November 2009 Page 1 of 2 1. Applicability Cirrus Design, SR20 and SR22 series aircraft. 2. Purpose The purpose of this AWB is to bring to the attention of operators and maintainers that there have been numerous reports of cracking found in Nose Landing Gear strut upper sections of both CIRRUS SR20 and SR22 aircraft. 3. Background Recent defect reports have indicated that cracking has occurred around the Nose Landing Gear upper support gusset and strut attachment welds. Cirrus Mandatory Service Bulletins 2X-32-18 R4 & 2X-32-19 address the cracking on SR20 & SR22 aircraft respectively. Additionally, FAA SAIB CE-09-46 now refers to the condition. 4. Recommendation CASA recommends that all operators of CIRRUS SR20 aircraft: • Carry out a detailed inspection of the area around the fillet weld between the upper gusset plate and attach point arms in accordance with Cirrus Mandatory Service Bulletin 2X-32-18 R4 or later revision and instructions for inspection in Cirrus AMM Chapter 32-20. • Continue to inspect at intervals determined in the service bulletin or replace gear with a Cirrus improved NLG strut when available. AIRWORTHINESS BULLETIN AWB 32-015 Issue : 2 Cracking in Nose Landing Gear upper strut sections of Cirrus SR20 and SR22 aircraft Date : 24 November 2009 Page 2 of 2 It is recommended that all operators of CIRRUS SR22 aircraft: • Carry out a detailed inspection of the area around the fillet weld between the upper gusset plate and attach point arms in accordance with Cirrus Mandatory Service Bulletin 2X-32-19 or later revision and temporary instructions for inspection in Cirrus AMM Chapter 32-20-02 • Continue to inspect at intervals determined in the service bulletin and reinforce gear in accordance with Cirrus approved repair item F. Report all instances of cracking to Cirrus and to CASA through the Service Difficulty Reporting (SDR) System. 5. Enquiries Enquiries with regard to the content of this Airworthiness Bulletin should be made via the direct link e-mail address: AirworthinessBulletin@casa.gov.au Or in writing, to: Airworthiness Engineering Branch Civil Aviation Safety Authority GPO Box 2005, Canberra, ACT, 2601 Inspect for Cracking in Nose Landing Gear upper attach point welds