DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training
Diamond DA62 · Maintenance Manual
Overview
This document outlines a training course designed for technicians transitioning from the Diamond DA42 to the Diamond DA62, both of which utilize Austro Engines. The course covers the necessary differences in maintenance and operational procedures between the two aircraft models. It is structured to comply with EASA regulations and is intended for those who already hold a maintenance license for the DA42. The training includes both theoretical and practical components, ensuring that participants are well-prepared to work on the DA62. The course is scheduled for a single day, lasting six hours, and is limited to a small number of participants to ensure effective learning.
- Course duration: 6 hours, from 09:00 a.m. to 04:00 p.m.
- Course price: EUR 1,200.00 (excl. VAT)
- Minimum 4 and maximum 5 participants due to COVID-19 restrictions
- Participants must have a DA42 endorsement to enroll in the course
- Location: Diamond Maintenance Training, Wr. Neustadt, Austria
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.
Document
Source
Copy found at www.diamondaircraft.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Maintenance Manual
- Pages ·
- 2
- File size ·
- 887 KB
- Copy found at ·
- www.diamondaircraft.com
What is the DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training?
The DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training is a maintenance manual for the Diamond DA62.
How many pages is the DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training?
The copy of the DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training on file runs 2 pages.
Common. More common than 92% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the Diamond DA62.
Diamond DA62 for sale now
Free — save the 62 to your watchlist and track it in one place.
More Diamond DA62manuals & documents
See all 22 →- Diamond DA62 Model GuideModel Guide
- DA62 THE ULTIMATE FLYING MACHINENormal Procedures
- Airworthiness Directive CF-2024-02Service Bulletins
- ENGINEERING INNOVATIONSpecifications
- DA62 MPP Technical SpecificationsAvionics Manual
- Airworthiness DirectiveAirworthiness Directives
- PRICE LIST FOR SALES PARTNERS ONLYService Manual
- AIRCRAFT TECHNICAL RECORDChecklist
- DA62 MPP Configuration for Geo Survey and MappingWeight & Balance
- DA62 THE ULTIMATE FLYING MACHINEWeight & Balance
- Beyond the PPL | PPL to ME/IRPilot's Operating Handbook
- Airworthiness Directive AD No.: 2017-0103R1Service Bulletins
Related documents
- Maintenance Familiarization Training – Registration FormDiamond DA62 · Systems Description
- Diamond DA62 Model GuideDiamond DA62 · Model Guide
- Operational Suitability Data – Flight Crew DA42Diamond DA42 NG · Specifications
- YOUR TURNKEY FLIGHT TRAINING SOLUTIONDiamond DA20-A1 Katana · Avionics Manual
- Airworthiness Directive AD No.: 2017-0103R1Diamond DA62 · Service Bulletins
If you fly the Diamond DA62, you may also be researching these.
In this document
Course Overview
The training course lasts for 6 hours and is designed for technicians who already have a DA42 (Austro Engine) endorsement. It covers the differences in maintenance and operation between the DA42 and DA62, ensuring compliance with EASA regulations.
Course Details
The course is priced at EUR 1,200.00, excluding VAT, and includes lunch and training materials. Participants are required to register and make payment at least three weeks prior to the course start date.
Participant Requirements
A minimum of 4 and a maximum of 5 participants are allowed due to COVID-19 restrictions. Participants must have a valid maintenance license for the DA42 to enroll in this difference training.
Location and Contact
The training takes place at Diamond Maintenance Training in Wr. Neustadt, Austria. Participants are advised to contact their National Authority for licensing information.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Safety notes
- All inspections and repairs on the engine must be carried out by an organization authorized by Austro Engine.
Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.
Full document text
Please Notice: According to the Austro Engine Maintenance Manual all inspections and repairs on the engine must be carried out by an organization which is authorized by Austro Engine. This course is created together with and covers these requirements for AE Service Center. DA42 Series (Austro Engine) to DA62 (Austro Engine) Difference Type Training (theoretical and practical-course) COURSE DURATION: 6 hours (1 days), 09.00 a.m. – 04.00 p.m. PRICE: EUR 1.200,00 (excl. 20% VAT / EUR 1.440,00 incl. VAT) lunch & training materials included BANK TRANSFER: at the latest 3 weeks before the date of the course start COURSE INFORMATION: the DA42 to DA62 (Austro Engine) Difference Type Training course is in compliance with EASA- (EU) No 1321/2014 Part66/Appendix III – Type Training B1.2, C – Piston Engine This training contains the differences between the Diamond DA42 Series (Austro Engine) to the Diamond DA62 (Austro Engine) and is created for technicians, who have already the DA42 (Austro Engine) endorsement in their Aircraft Maintenance Licence. If the DA42 (Austro Engine) isn’t in your maintenance licence, the full Type Training course for the relevant type (DA62 (Austro Engine)) is necessary! For licensing, Diamond recommends that you always get in contact with your National Authority! COURSE LEVEL: Line and Base Maintenance B1.2 / Level 3 COURSE PLACE: Diamond Maintenance Training, Ferdinand Graf von Zeppelinstraße 5, 2700 Wr. Neustadt/AUSTRIA PARTICIPANTS: minimum 4, maximum 5 persons (due to COVID-19 pandemic) Note: we reserve the right to cancel a course if there are not enough participants. In this case we will propose an alternative date. DRESS CODE: No dress code INTERNET ACCESS: Please ask your instructor for a WLAN access Please Notice: According to the Austro Engine Maintenance Manual all inspections and repairs on the engine must be carried out by an organization which is authorized by Austro Engine. This course is created together with and covers these requirements for AE Service Center.