Weight & Balance for Mooney M20G Statesman

9/16 DG9 . WDG9 . 1-7/8 DG30 . 5/8 DG10 . WDG10 . 1-15/16 DG31 . 11/16 DG11 . WDG11 . 2 DG32 . 3/4 DG12 . WDG12 . 2-1/16 DG33 . 13/16 DG13 . WDG13 . 2-1/8 DG34 . 7/8 DG14 . WDG14 . 2-1/4 DG36 . 15/16 DG15 . WDG15 . 2-3/8 DG38 . 1 DG16 . WDG16 . 2-1/2 DG40 . 1-1/16 DG17 . WDG17 . 2-5/8 DG42 . 1-1/8 DG18 . WDG18 . 2-3/4 DG44 . 1-3/16 DG19 . WDG19 . 2-7/8 DG46 . 1-1/4 DG20 . WDG20 . 3 DG48 . 3-1/8 DG50 . 119 CM WP ME HA AP LG EP CS IN EL AV TO PS BV NYLO-SEAL TUBING - POLY-FLO TUBING NYLO-SEAL NYLON TUBING Nylo-Seal type “NSF” semi- rigid natural color tubing is made of Nylon-II and is far superior to other types of Nylon tubing. It does not depend on moisture for flexibility and does not become brittle. It has excel- lent resistance to flexural fatigue and can be used where there is vibration or tube movement. Self-ex- tin guishing under A.S.T.M. Test D635-44. Excellent for instrument lines. NSR nyloseal tubing is black in color and is rated to 2500 lbs. It can be used for higher pressure applications than the NSF tubing. POLY-FLO POLYETHYLENE TUBING Poly-Flo tubing is a flexible, economical thermo- plastic tubing fabricated from high molecular weight polyethyl ene for improved strength. The base resin has the greatest resistance to envi- ronmental stress cracking of all the regular polyethylenes. It meets A.S.T.M. D-1248-60T, Type 1, Class A, Grade 4 and Federal Specifi ca tion LP-590, Type 2, Grade 7. Used for instrument or pneumatic lines. Use Nylo-Seal fittings (259-N inserts are required), nylon or polyethylene hose fittings such as 0710-153. Color - natural. I.D. Wall Part No. Price/Ft 3/16” 1/16” 05-00200 . 1/4” 1/16” 05-00300 . 3/8” 1/16” 05-00400 . Part No. O.D. (In.) Wall (In.) Burst Pressure (PSI) Min. Bend Radius Wt. (Lb/Ft) Price per Ft. 05-01009 1/8 .026 1500 3/8” .004 . 05-01010 3/16 .039 1500 5/8” .008 . 05-01011 1/4 .050 1500 7/8” .015 . 05-01012 3/8 .075 1500 1-1/2” .032 . POLYURETHANE TUBING Flexible polyurethane tubing has greater abrasion and tear resistance than any other type of plastic tub- ing. Won’t age or oxidize. Excellent low temperature flexibility - avoids brittleness. Tensile strength 5900 PSI. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Sold by the foot. Operating Temperature Poly-Flo (Polyethylene) Burst Max. Work Pressure* Pressure* PSI PSI Nylo-Seal NSR** (Nylon 11) Burst Max. Work Pressure* Pressure* PSI PSI Room Temp. 250-600 75-160 2500 625 140°F. 125-300 37-80 1800 425 230°F. UNUSABLE 1400 350 280°F. UNUSABLE UNUSABLE *Depends on tube size and wall thickness. Working pressure based on a safety factor of 4. **Satisfactory for continuous operation up to 180° F. Becomes embrittled above this point. NYLAFLOW NYLON TUBING Nylon Polypenco® pressure tubing is a super-tough, low friction, high flexibility tubing that can be used for cable protectors or in short pieces, as small bushings and washers. Suitable for use in oil, air, vacuum, fuel and low pressure hydraulic lines. It Resists abrasion - wears better than alumi- num or steel tubing. Has an extremely smooth inner surface with a very low coefficient of friction. Used for brake lines, and also as a conduit for the rudder cables in the Rutan VariEze and Long-EZ. Rated 1000 psi. Use Poly-Flo fittings. Type OD ID PSI Part No. Price Thicker wall 1/8 .096 1000 05-00105 . Thicker wall 3/16 .138 1000 05-00110 . Thicker wall 1/4 .190 1000 05-00115 . High Bursting Pressure 1/4 .150 2500 05-04349 . High Bursting Pressure 3/16 .111 (appx.) 2500 05-04355 . TYGON TUBING Tygon tubing is flexible, tough, abrasion-resis tant and non-aging. Ideal or hookup of airspeed pitot and static lines (not rec om mended for pressurized appli ca tions). Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. 3/8” O.D. X 1/4” I.D. ...................P/N 05-00944 ................. Ft 1/2” O.D. X 3/8” I.D. ...................P/N 05-00945 ................. Ft BING ALCOHOL RESISTANT FUEL LINE This fuel line is blue in color and does not rot or deteriorate from the inside, clogging the carburetor or fuel system. It withstands 50 PSI and tensile strength is 8000 PSI. It is resistant to temperatures of -65° to 220°F without deterioration, features exceptional resistance to gasoline, oil, oxygen, and ozone, and has high elastic memory allowing use of Delrin or nylon barbed fittings in low pres- sure applications without the need for external clamps. Description ID OD Part No. Price Bing Alcohol Resistant Fuel Line 1/4 3/8 05-00500 . Bing Alcohol Resistant Fuel Line 1/8 1/4 05-00560 . Part No. Tube OD Wall Bend Radius PSI at 75 F PSI at 150 F Price 44-P 1/4 0.040 1.250 190 75 . 66-P 3/8 0.062 2.00 205 80 . 88-P 1/2 0.062 2.500 150 60 . Chemical (at 72°F.) Poly-Flo (Polyethylene) Nylo-SealNSR (Nylon 11) Hydrocarbons (Fuel & Oil) U A Chlorinated Hydrocarbons U A Acetone, MEK VariesA Toluene, Xylene U A Weak Acids A A Strong Acids A Varies Weak Bases A A Strong Bases A A A: Acceptable U: Unsatisfactory Physical Property Poly-Flo (Polyethylene) Nylo-SealNSR (Nylon 11) Tensile Strength 2,100 psi 8,500 psi Elongation 600% 160% Water Absorption 0.014% 0.4% Hardness R-10 R-86 Specific Gravity 0.92 302°F. Heat Distortion Point (66 psi) 107°F. 302°F. Modulus of Elasticity 13,000 psi 177,000 psi Data shown obtained from test on tubing raw material under A.S.T.M. pro- cedures. NSF TUBING Part No. O.D. (In.) Wall (In.) Burst Pressure (PSI) Min. Bend Radius Wt. (Lb/Ft) Price per Ft. 05-01228 1/8 .026 2500 3/8” .004 . 05-01229 1/4 .050 2500 7/8” .015 . 05-01231 3/8 .075 2500 1-1/2” .032 . NSR TUBING NEOPRENE HOSE Neoprene tubing is used in instrument hookups and for bat- tery drains. Use AN hose fittings such as AN840 with Breeze Mini Clamps, nylon or polyethylene hose fittings such as 0710-153. Not for use as fuel or oil lines. CHEMICAL RESISTANCE PHYSICAL PROPERTIES OF TUBING BASE POLYMER PRESSURE RATINGS Mfg PN OD ID Our PN Price 0585-071 3/8 1/4 0585-071 . 0585-107 1/2 3/8 0585-107 . 0585-165 7/8 5/8 0585-165 . 0585-180 3/4 1 05-04246 . PARKER SUPER-FLEX FL FUEL LINE HOSE Parker’s fuel line hose includes a new thermoplastic barrier that helps protect our atmosphere from harmful hydrocarbons that es- cape through the carcass of ordinary fuel hose. This new hose surpasses all of CARB’s stringent permeation requirements and is similar to SAE30R7 specifications. The Super-Flex FL hose also features an abrasion and weather resistant cover to help protect from external application abuse. Approved for biodiesel fuels that meet ASTM D 6751 requirements per UL guidelines for Biodiesel compatibility.4:1 Design factor Tube: NBR with a thermoplastic barrier Cover: Black Hypalon Reinforcement: Braided Polyester Temperature Range: -30°F to +257°F (-34°C to +125°C) Part No. ID (in.) Reinf. Braids OD(in.) OD(mm) Approx. wt. per 100 ft. Min. Bend Rad. Max Rec. WP Price Per Ft. 05-03597 1/4 1 0.500 12.7 9.7 - 100 . 05-03598 3/8 1 0.625 15.9 1.30 - 100 . NYLON TUBING Nylon tubing is a popular choice for low pressure pneu- matic applications because of its combination of flexibility and toughness. Nylon retains its performance integrity in elevated temperatures and generally, because of it’s high- er pressure and temperature characteristics, Nylon will have a greater flow passage than composite tubing made from other material with the same outside diameter. Part No. OD ID Price 0500-165 7/8 5/8 . 0500-180 1 3/4 . 120 CM WP ME HA AP LG EP CS IN EL AV TO PS BV HOSE - HOSE FITTINGS * Corresponds to dash no. of Aeroquip 816 hose fittings. ** Safety factor of 4. AEROQUIP 303 HOSE This standard hose is used in med-pressure a/c hydraulic fuel, oil and coolant systems. An inner tube of seamless synthetic rubber is reinforced with a synthetic-impregnated single-wire braid over a single cotton braid and an outer cover of synthetic-impregnated oil-resistant cotton braid. Operating temperature -65° to 250°F. Conforms to MILH- 8794 (supersedes MIL-H-5511A). Used with Aeroquip 491 hose fittings. MIL6000D OIL AND COOLANT HOSE Inside and out, MIL6000D is designed to handle the effects of oil, alcohol, coolant, and water. The tube is oil resistant with a black cover reinforced with high strength mildew resistant yarns. It withstands extreme tempera- ture conditions from -40°F to +250°F. Meets or exceeds U.S. military specs. Lightweight, flexible and easy-to- handle, making it the perfect hose for hard-to-get-to spots in tight engine compartments. Not recommended for fuel lines. AEROQUIP AS SEM BLY MAN DRELS FOR AIRCRAFT HOSE ASSEM BLIES For use with Aeroquip 491 fittings. These tools are recommended to avoid damage to the seal- ing surface and to properly support the inner tube. Note: These are Aeroquip Factory Mandrels, which are highly recommended for best results. Part No. Hose Dimensions Burst Pressure (PSI) Wt./ Ft. (Lb.) Price Per Ft. I.D. (In.) O.D. (In.) 6000-4 1/4 5/8 1,000 .14 . 6000-5 5/16 11/16 1,000 .16 . 6000-6 3/8 3/4 1,000 .18 . 6000-8 1/2 7/8 1,000 .22 . 6000-10 5/8 1 1,000 .26 . 6000-12 3/4 1-1/8 1,000 .27 . 6000-14 7/8 1-1/4 1,000 .32 . 6000-16 1 1-3/8 1,000 .38 . AEROQUIP 306 HOSE (MIL-H-5593) A low-pressure hose for instrument air & vacuum lines. Consists of an inner tube of seamless syn- thetic rubber, reinforced with a single layer of cotton braid and a synthetic rubber cover. Used with slip-over hose fittings such as the AN840 series, or with Aeroquip 471 hose fittings when connecting to AN type fittings. Conforms to Specification MIL-H-5593. Specify hose I.D. when ordering. Part No. Hose Dimensions Burst Pressure (PSI) Wt./ Ft. (Lb.) Price Per Ft. I.D. (In.) O.D. (In.) 306-2 1/8 11/32 1,000 .056 . 306-4 1/4 15/32 1,000 .072 . 306-6 3/8 19/32 1,000 .096 . 306-8 1/2 3/4 750 .144 . 306-10 5/8 7/8 700 .168 . AEROQUIP 471 HOSE FITTING USED WITH AEROQUIP 306 HOSE Aeroquip 471 hose fittings consist of an AN818 nut, an externally threaded 37° nipple and an internally threaded hose socket. All compo- nents are anodized aluminum. Fittings con- form to MS27404. Part No. Tube Size (In.)* AN818 Nut Thread Size Price Ea. 471-2D 1/8” 5/6-24 . 471-4D 1/4 7/16-20 . 471-6D 3/8 9/16-18 . 471-8D 1/2 3/4-16 . *Corresponds to tube O.D. of AN-type flared tube fittings. Not an Aeroquip dimension. Hose Size #491 Fitting P/N Mandrel P/N Price Hose Size #491 Fitting P/N Mandrel P/N Price 3/16” 491-3 S-1051-3* . 1/2” 491-8 S-1051-8 . 1/4” 491-4 S-1051-4* . 5/8” 491-10 S-1051-10 . 5/16” 491-5 S-1051-5* . 3/4” 491-12 S-1051-12 . 3/8” 491-6 S-1051-6* . *With Removable mandrel. Aeroquip Qty. Discount: 15% for 20 ft.; 20% for 50 ft.; 25% for 100 ft. or more (Per Item) Hose P/N* For Tubing Size Hose I.D. Max. Oper. Pressure** (PSI) Wt. per Ft. (Lb.) Price Per Ft. 303-3 3/16 1/8 3,000 .120 . 303-4 1/4 3/16 3,000 .132 . 303-5 5/16 1/4 3,000 .156 . 303-6 3/8 5/16 2,000 .228 . 303-8 1/2 13/32 2,000 .264 . 303-10 5/8 1/2 1,750 .372 . 303-12 3/4 5/8 1,500 .456 . * Corresponds to dash no. of Aeroquip 491 hose fittings. ** Safety factor of 4. AEROQUIP 666 HOSE Aeroquip 666 medium pressure Teflon hose is widely used in aircraft applications handling fuel, oils, and other fluids. It is unaffected by all fuels, oils, alcohols, coolants, or solvents commonly use in aircraft. Construction of Aeroquip 666 hose is of spiral extruded Teflon resin for the inner tube with a reinforcement and outer cover of Type 300 Series stainless steel wire braid. The result is a lightweight hose able to withstand prolonged flexing and vibration under all service conditions. Aeroquip 666 hose is also use in hydraulic and pneumatic applications at pressures up to 1500 psi. Hose Part No. Hose I.D. (inches) Hose O.D. (inches) Max. Oper. Pressure Wt. Per Ft. (lbs.) Price Per Ft. 666-4 .188 .312 1500 .08 . 666-5 .250 .375 1500 .09 . 666-6 .313 .466 1500 .11 . 666-8 .406 .562 1500 .14 . 666-10 .500 .656 1500 .19 . 666-12 .625 .789 1000 .24 . STRAIGHT CRIMP FLARELESS FITTINGS FOR #666 HOSE MIL-H-6000 HOSE AVAILABLE IN 10 FT MAXIMUM LENGTHS MIL-H-6000 IS SUPERCEDED BY MIL-DTL-6000C **NOT RECOMMENDED FOR FUEL LINES** Part Number Aeroquip Hose Size Price ea. AE21502-E 666-4 . AE21502-F 666-5 . AE21502-G 666-6 . Part Number Aeroquip Hose Size Price ea. AE21502-H 666-8 . AE21502-J 666-10 . AE21502-K 666-12 . Use with Hose Size Part No. Price ea. 666-4 05-01320 . 666-5 05-01321 . 666-6 05-01322 . Use with Hose Size Part No. Price ea. 666-8 05-01323 . 666-10 05-01324 . 666-12 05-01325 . REUSABLE 37° FITTINGS FOR #666 HOSE 471-2D AEROQUIP 491 HOSE FITTINGS USED WITH AEROQUIP 303 HOSE Aeroquip 491 hose fittings consist of an AN818 style nut, an externally threaded 37° nipple and an internally threaded hose socket. Fittings of sizes 3 through 6 have nuts and nipples of cad- mium plated steel. Nuts and nipples for size 8 and larger are of anodized aluminum. Fittings conform to MS24587. Part No. Tube Size (In.)* AN818 Nut Thread Size** Price Each 491-3 3/16 3/8-24 . 491-4 1/4 7/16-20 . 491-5 5/16 1/2-20 . 491-6 3/8 9/16-18 . 491-8D 1/2 3/4-16 . 491-10D 5/8 1-1/16-12 . 491-12D 3/4 1-1/16-12 . Crimping tool and sleeve required for assembly. P/N 491-3 MILSPEC MANDRELS PN Hose Fitting Price 05-01885 3/16 MS-3M . 05-01886 1/4 MS-4M . 05-01887 5/16 MS-5M . 05-01888 3/8 MS-6M . 05-04241 1/2 MS-8M . 05-04242 5/8 MS-10M . 05-04243 3/4 MS-12M . 05-04544 Includes 1 each of the MilSpec Mandrels . AEROQUIP FITTINGS - 8791 For AE701 Hose. Part No. Price 8791-4 . 8791-6D . Part No. Price 8791-8D . 8791-10D . AEROQUIP FITTINGS - 526 For AE701 Hose. Part No. Price 526-4 . 526-6D . Part No. Price 526-8D . 526-10D . 121 CM WP ME HA AP LG EP CS IN EL AV TO PS BV HOSE - HOSE FITTINGS - ASSEMBLIES AEROQUIP 816 & 8891 HOSE FITTINGS USED WITH AEROQUIP 601 HOSE Aeroquip 816 straight hose fittings and 8891 90° hose fittings consist of a pre- assembled nut/nipple assembly and an internally threaded hose socket. The size 4 fitting has a cadmium plated steel nut and nipple. Sizes 6, 8 and 10 nuts and nipples, and all sizes of sock- ets, are anodized aluminum. Note: Aeroquip 816 fittings are not the same as AN816 fittings. Include the word “Aeroquip” with Part number when ordering. AEROQUIP FIRE SLEEVE Aeroquip Firesleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75. May be used for all fuel, oil, hydraulic, fire extin- guisher & propeller feathering lines. “Fire-proof” hose lines as defined by FAA must withstand a direct flame for fifteen minutes under specified flow conditions without failure. “Fire- resistant” lines must withstand a 5-minute exposure under these condi- tions. “Fire-proof” hose lines are obtained when the proper size Aeroquip Firesleeve is selected from the chart below and properly assembled. 900591B Clamps - used to secure firesleeve material on each end over the basic hose assembly. See chart for correct size. 900591B-1C ........................... P/N 05-02653......................................... . 900591B-2C ........................... P/N 05-02652......................................... . 900591B-3C ........................... P/N 05-02654......................................... . AEROQUIP AE466 Integral silicone firesleeves on Teflon 666 hose assemblies. This hose/sleeve combination meets the test require- ments of TSO-C53A Type D and TSO-C75 Type IIIA and IIIB. The Silicone sleeve is applied directly onto the metal braid an fittings to form a smooth, tight bond. Hose flexibility is not impaired. Non-age sensitive for extra-long service life. Eliminates the use of band clamps. Temperature range -65°F to +450°F. Specify hose size and length of assembly in inches and eighths of an inch from sealing surface to sealing surface. Available in blue or brown. Call 877-4-SPRUCE (444823), or email info@aircraftspruce.com for pricing and availability. CUSTOM AEROQUIP 666 TEFLON HOSE ASSEMBLIES Aeroquip Teflon hose is constructed with a conductive, seamless smooth bore inner tube covered with a stainless steel braid. Unattracted by fuel, oil, coolants and solvents used in aircraft systems. Service and shelf life of Aeroquip Teflon hose is unlimited for all practical purposes. They can be used in fuel, hydraulic and pneumatic applications at working pressures to 1500psi. Minimum burst pressures are 8000 psi sizes -3 to -8. Temperature range is -65° to +450° F. Hose assemblies prices are straight to straight. Call for 45° and 90° elbow pricing.Measurements are taken as follows: F tt M a ur t Straight to Straight End to end (overall length) Straight to 45° End of straight fitting to top of b-nut on 45° fitting Straight to 90° End of straight fitting to center of 90° fitting 45° to 45° Top of b-nut on 45° fitting to Top of b-nut on 45° fitting 45° to 90° Top of b-nut on 45° fitting to center of 90° fitting 90° to 90° Center of 90° fitting to Center of 90° fitting Call 877-4-SPRUCE (444823), or email at info@aircraftspruce.com for pricing and availability. S A ro u p P/N -3 AE3660000BXXXX -4 AE3660000EXXXX -5 AE3660000FXXXX -6 AE3660000GXXXX S A ro u p P/N -8 AE3660000HXXXX -10 AE3660000JXXXX -12 AE3660000KXXXX S A ro u p P/N -3 AE3663161BXXXX -4 AE3663161EXXXX -5 AE3663161FXXXX -6 AE3663161GXXXX S A ro u p P/N -8 AE3663161HXXXX -10 AE3663161JXXXX -12 AE3663161KXXXX AEROQUIP MS28741 CUSTOM RUBBER HOSE ASSEMBLIES All hose assemblies are special-order and non-return- able. Custom-fabricated MS28741 hose assemblies fabricated (Aeroquip #303 or 302A) from MIL-H- 8794 hose and MS24587 fittings (Aeroquip #491 or equivalent). Inner Tube: seamless synthetic rubber compound Reinforcement: synthetic impregnated single-wire braid over single cotton braid Outer Cover: synthetic impregnated oil-resistant cot- ton braid Operating Temperatures: • 303 Hose: -65° to +250°F • 302A Hose: -40° to +250°F. See measuring instructions above. Call 877-4-SPRUCE (444823), or email at info@aircraftspruce.com for pricing and availability. Quantity Discounts Same As Aeroquip Hose Firesleeve Clamp Installation Tool - Band Width: 1/4 in - 3/8 in P/N 05-00447 .................................................... . Economy Firesleeve Clamp Tool - for 3/8” or 1/4” roll band. P/N 12-00684 .................................................... . Aeroquip 816 S Nut Thr a S Aeroquip 8891 Part No. Pr Ea h Part No. Pr Ea h 816-4 . 1/4 7/16-20 8891-4 . 816-6D . 3/8 9/16-18 8891-6D . 816-8D . 1/2 3/4-16 8891-8D . 816-10D . 5/8 7/8-14 8891-10D . BLACK SILICONE FIRE JACKET This black silicone fire jacket has a temperature range of -65°F to +2000°F AND IS 5/8” I.D. Fits all E185–E225 & IO-470 breather tubes. P/N 05-00672............................... I O Wt / Ft. (Lb.) Part No. Pr / Ft 1/4” 0.45” .064 05-00659 . 3/8” 0.67” .144 05-00660 . 5/8” 0.95” .220 05-00661 . 3/4” 1.07” .276 05-00671 . Temp. range -65°F to +350°F. Color; Blue SILICONE HOSE Part No. U W th Hose # 900591B C a p Dash # Pr P r Ft. Part No. U W th Hose # 900591B C a p Dash # Pr P r Ft. 303 601 303 601 AE102-8 -3 -4 -1C . AE102-16 -10 -10 -3C . AE102-9 -4 -5 -2C . AE102-18 -12 - -3C . AE102-10 -5 - -2C . AE102-20 - -12 -3C . AE102-12 -6 -6 -2C . AE102-22 -16 -16 -3C . AE102-14 -8 -8 -2C . Hose Part Part No. For Tubing S Hose I.D. Max. Op r. Pressure** (PSI) Wt. p r Ft. (Lb.) Pr P r Ft. 601-4 1/4 7/32 1,000 .120 . 601-6 3/8 11/32 1,000 .156 . 601-8 1/2 7/16 1,000 .168 . 601-10 5/8 11/16 1,000 .204 . AEROQUIP 601/AE701 HOSE An inner tube of seamless, specially for- mulated synthetic rubber reinforced with a stainless steel partial inner braid and full-coverage stainless steel outer braid. Operating temperature -40° to 300°F. Aeroquip 601 hose is widely used for aircraft fuel and oil lines where flexibility and light weight are prime considerations. Because of its lighter weight and lower operating pressure than type 303 hose, it is not recommended for hydraulic lines. Use with Aeroquip 816 hose fittings. Aeroquip 601/AE701 is a direct replacement for old 601 hose. AE701 hose has no shelf life and is the upgraded version of 601 hose. * Corresponds to dash no. of Aeroquip 816 hose fittings. ** Safety factor of 4. *Corresponds to tube O.D. of AN-type flared tube fittings. Not an Aeroquip dimension. ** Same thread size as AN818 nut of same dash no. Less 10%, 6 - 11 Aeroquip fittings; Less 15%, 12 - 24 Aeroquip fittings; Less 20%, 25 or more Aeroquip Fittings May be assorted sizes and types. 816-4 SPEEDLOX LOCKING FITTINGS Features: * No Wrenches Required * NHRA Approved * Retrofittable with existing hoses & hose ends * Eliminates the need for a wrench to seal the connection, Just hand tight * Eliminates cross-threading with the built in B-Nut guide * Prevents cavitation * Stays as a unit, no assembly required * Protects threads from F.O.D. (Foreign Object Damage) * Elimi- nates the need for safety wire * Reduces R & R time * Increased safety factor * Eliminates unscheduled maintenance * Eliminates hose twisting or binding * Greatly reduces contamination at the connection * Discour- ages over tightening the connection due to sealing system * Allows for torsional flex without losing the seal at the connection * Standard B-Nut is accessible to be torqued before locking, If required * Can be made tamper proof by filling the lock ring hole with a suitable material such as silicone or epoxy * Eliminates unnecessary contamination to the environment (leaks ) * The hose end may be “Timed” in order to position the release tang away from any vulnerable areas * In the event an object should strike the sleeve in the unlocked position, the sleeve will absorb the impact of F.O.D. by snapping out of the unlock detent S Thr a Part No. Pr SSA-3 Straight 04-01966 . SSA-4 Straight 04-01967 . SSA-6 Straight 04-01968 . SSA-8 Straight 04-01969 . SSA-10 Straight 04-01970 . SSA-12 Straight 04-01971 . SSA-16 Straight 04-01972 . SSA-20 Straight 04-01973 . S Thr a Part No. Pr SPA-3 Pipe 04-01974 . SPA-4 Pipe 04-01975 . SPA-6 Pipe 04-01976 . SPA-8 Pipe 04-01977 . SPA-10 Pipe 04-01978 . SPA-12 Pipe 04-01979 . SPA-16 Pipe 04-01980 . 122 CM WP ME HA AP LG EP CS IN EL AV TO PS BV USING 601 HOSE AND 816 FITTINGS To make hose assembly of length “L”, cut hose to length “J”. Obtain “J” length by subtracting proper fitting allowances. step 1 - Cut hose squarely to length. Use hose cut-off machine or fine tooth hacksaw. To minimize wire braid flare-out, wrap hose with masking tape and saw through tape. Remove tape before step 2. step 2 - Insert hose in socket with a twisting, pushing motion until hose is in line with back of socket threads. step 3 - Important-mark hose position around hose at rear of socket. Use a grease pencil, painted line or tape. step 4 - Lubricate inside of hose & nipple threads liberally. Use SAE 30 lubricating oil. Avoid getting oil in the cutting spur of the nipple. step 5 - Carefully insert nipple and engage nipple and socket threads while holding hose in position with other hand. Make sure that hose does not push out of socket by observing mark made in step 3. step 6 - Complete assembly using wrench while continuing to hold in position. Maximum allowable gap is .041“ in sizes 3, 4, & 5, and .031“ in size 6 & up. step 7 - IMPORTANT—check for hose push-out by observing hose posi- tion mark. None should be evident. CLEAN, INSPECT, PROOF TEST Note: Hose push out after proof test should not exceed 1/32” on sizes 12 and up. None is allowable on smaller sizes. HOSE ASSEMBLY USING 303 HOSE AND 491 FITTINGS To make hose assembly of length “L”, cut hose to length “J”. Obtain “J” length by subtracting proper fitting allowances. ASSEMBLY INSTRUCTIONS Hose & Fitting Dash No. -3 -4 -5 -6 -8 -10 -12 Fitting Allowance* (In.) 1.30 1.30 1.48 1.54 1.88 2.00 2.00 *Allowance for 2 fittings. step 1 Cut hose squarely to length. Use hose cut-off machine or fine tooth hacksaw. Do not remove cover. step 2 Place socket in vise. Do not overtighten vise on thin-walled sockets of lightweight fittings. Screw hose into socket until it bottoms. Back-off 1/4 turn. step 3 Tighten nipple and nut on assembly mandrel. step 4 Lubricate inside of hose and nipple threads liberally. Use lubricating oil, petrolatum or light grease. step 5 Screw nipple into socket and hose using wrench on ass’y tool hex. Nut must swivel freely when assembly tool is removed. Maximum allowable gap is 1/16 inch. L.P.S.-1 is an excellent lubricant for use in hose assembly. CLEAN, INSPECT, PROOF TEST PLANNING HOSE LINE INSTALLATIONS 1. Provide slack or bend in the hose line to provide for changes in length that will occur when pressure is applied. 2. Observe linear stripe. Hose must not be twisted. High pressures applied to a twisted hose may cause failure or loosen the nut. STRATOFLEX 2650 FIRESLEEVE *10781-4 Clamp to be used to secure the Firesleeve material on each end over the basic hose assembly. Specify size. . - . End Dip for Firesleeve - P/N 5027 ...................... . Part No. Use With Hose No. *10781-4 Clamp Price Per Ft. 124 193 111 156 2650-6 -4 - - - - - 2650-8 -6 -3 - -4 22CR . 2650-9 - -4 - -5 22CR . 2650-10 -8 - -4 -6 22CR . 2650-11 - -6 - - - - 2650-12 -10 - -5,-6 -8 22CR . 2650-13 - -8 -8 - - - 2650-14 -12 - - - 22CR . 2650-16 - -10 -10 -10 32CR . 2650-18 - - - -12 32CR . 2650-20 -16 - -12 - 32CR . 2650-22 - - -16 -16 32CR . 123 CM WP ME HA AP LG EP CS IN EL AV TO PS BV STRATOFLEX 193 HOSE Part No Tube O.D. Hose ID. Max Press Weight per In. (l.b.) Price Per Ft. 193-2 .35 .125 300 .0038 . 193-3 .41 .188 250 .0050 . 193-4 .48 .250 200 .0058 . 193-6 .60 .375 150 .0079 . 193-8 .75 .500 150 .0015 . 193-10 .87 .625 150 .0138 . STRATOFLEX 311 STRAIGHT FLARED FITTING FOR 193 HOSE Part No. Tube O.D. Thread Price Ea. 311-2D .125 5/16-24 . 311-3D .188 3/8-24 . 311-4D .250 7/16-20 . 311-6D .375 9/16-18 . 311-8D .500 3/4-16 . 311-10D .625 7/8-14 . STRATOFLEX 111 HOSE Part No Tube O.D. Hose ID. Max Press Wt Per lb./In. Price Per Ft. 111-4 .250 .188 3000 .0120 . 111-5 .312 .250 3000 .0130 . 111-6 .375 .312 2000 .0190 . 111-8 .500 .406 2000 .0220 . 111-10 .625 .500 1750 .0310 . 111-12 .750 .625 1500 .0380 . 111-16 1.00 .875 800 .0368 . STRATOFLEX HOSE & FITTINGS STRATOFLEX 300 STRAIGHT FLARED FITTINGS FOR 111 HOSE Part No. Tube O.D. Thread Price Ea. 300-3S .188 3/8-24 . 300-4S .200 7/16-20 . 300-5S .312 1/2-20 . 300-6S .375 9/16-18 . 300-8D .500 3/4-16 . 300-10D .625 7/8-14 . 300-12D .750 1-1/16-12 . 300-16D 1.00 1-5/16-12 . STRATOFLEX 646/640 45° ELBOW FLARED FITTINGS FOR 111 HOSE STRATOFLEX 649/643 90° ELBOW FLARED FITTINGS FOR 111 HOSE Part No. Tube O.D. Thread Price Ea. 649-4S .250 7/16-20 . 649-6S .375 9/16-18 . 649-8D .500 3/4-16 . 649-10D .625 7/8-14 . 649-12D .750 1-1/16-12 . STRATOFLEX 676 STRAIGHT FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 676-3S .188 3/8-24 . 676-4S .250 7/16-20 . 676-5S .312 1/2-20 . 676-6D .375 9/16-18 . 676-8D .500 3/4-16 . 676-10D .625 7/8-14 . 676-12D .750 1-1/16-12 . 676-16D 1.000 1-5/16-12 . STRATOFLEX 680 90° ELBOW FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 680-3S .188 3/8-24 . 680-4S .250 7/16-20 . 680-5S .312 1/2-20 . 680-6D .375 9/16-18 . 680-8D .500 3/4-16 . 680-10D .625 7/8-14 . 680-12D .750 1 1/16-12 . 680-16D 1.000 1 5/16-12 . STRATOFLEX 156 MEDIUM PRESSURE HOSE Part No Tube O.D. Hose ID. Max Press Mini Blend Price Per Ft. 156-3 .188 .156 1500 1.75 . 156-4 .250 .219 1500 2.00 . 156-5 .312 .281 1500 2.25 . 156-6 .375 .344 1500 2.50 . 156-8 .500 .438 1250 3.50 . 156-10 .625 .562 1250 4.00 . 156-12 .750 .688 1250 4.50 . 156-16 1.000 .875 1000 5.50 . STRATOFLEX 678 45° ELBOW FLARED FITTINGS FOR 156 HOSE Part No. Tube O.D. Thread Price Ea. 678-3S .188 3/8-24 . 678-4S .250 7/16-20 . 678-6D .375 9/16-18 . 678-8D .500 3/4-16 . 678-10D .625 7/8-14 . 678-12D .750 1-1/16-12 . 678-16D 1.00 1-5/16-12 - STRATOFLEX FLARED HOSE ASSEMBLIES Call for quote on Stratoflex 111, 156, 193 and 124 PTFE flared hose assemblies. Our hose assemblies are competitively priced and available for immediate shipment. Part No. Tube O.D. Thread Price Ea. 646-4S .250 7/16-20 . 646-6S .375 9/16-18 . 646-8D .500 3/4-16 . 646-10D .625 7/8-14 . 640-12D .750 1-1/16-12 . 640-16D 1.00 1-5/16-12 . 124 CM WP ME HA AP LG EP CS IN EL AV TO PS BV DUCTING “CAT” - “CAT” type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neoprene- impregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65° to over 350°F. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applica- tions. “SCAT” - “SCAT” type ducting has the same type construction as “CAT” except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65° to over 550°F. Not recommended for negative pressure applications. “CEET” - “CEET” type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air applications and for conveying fumes at tem- peratures ranging from -65° to over 350°F. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications. “SCEET” - “SCEET” type ducting has two plies of silicone rubber-impregnated fiberglass, similar to SCAT except wire between plies. Ideal for use in conducting extremely cold or hot air at tempera- tures from -80° to over 550°F, and for conveying fumes. Not reccomended for handling liquids or highly abrasive materials, or for negative pressure applications. AIRCRAFT FLEXIBLE DUCTING SCREWING DUCTING TO GETH ER Short lengths of ducting can be spliced to eliminate waste. For perma- nent splices, an adhesive should be applied to the ends before joining. To relieve wire tension when cut, bend end of wire in slightly. ANTIQUE PIPER WING ROOT FRAME COVERS This cover is constructed of a light-weight stiff- ener panel, 1/2” foam padding and headliner fabric. A flap extends into the back side of the wing root frame and glues in place for a profes- sional finish. P/N 09-17345................................. . ALUMINUM FLANGES FOR DUCTING Simplify installation of cabin, carb. heat, cabin vent lines. Aluminum flange may be welded or riveted in place. Slip ducting over outlet and secure with clamp. CAT SCAT CEET SCEET Dash No. Inside Diameter CAT SCAT CEET SCEET Part Number Price Per Foot Part Number Price Per Foot Part Num ber Price Per Foot Part Number Price Per Foot -2A 5/8” 05-29801 . 05-29901 . 05-30501 . 05-30601 . -3 3/4” 05-29802 . 05-29902 . 05-30502 . 05-30602 . -3A 7/8” 05-29803 . 05-29903 . 05-30503 . 05-30603 . -4 1” 05-29804 . 05-29904 . 05-30504 . 05-30604 . -5 1-1/4” 05-29805 . 05-29905 . 05-30505 . 05-30605 . -6 1-1/2” 05-29806 . 05-29906 . 05-30506 . 05-30606 . -7 1-3/4” 05-29807 . 05-29907 . 05-30507 . 05-30607 . -8 2” 05-29808 . 05-29908 . 05-30508 . 05-30608 . -9 2-1/4” 05-29809 . 05-29909 . 05-30509 . 05-30609 . -10 2-1/2” 05-29810 . 05-29910 . 05-30510 . 05-30610 . -11 2-3/4” 05-29811 . 05-29911 . 05-30511 . 05-30611 . -12 3” 05-29812 . 05-29912 . 05-30512 . 05-30612 . -13 3-1/4” 05-29813 . 05-29913 . 05-30513 . 05-30613 . -14 3-1/2” 05-29814 . 05-29914 . 05-30514 . 05-30614 . -15 3-3/4” 05-29815 . 05-29915 . 05-30515 . 05-30615 . -16 4” 05-29816 . 05-29916 . 05-30516 . 05-30616 . -18 4-1/2” 05-29818 . 05-29918 . 05-30518 . 05-30618 . 20 5” 05-29820 . 05-29920 . 05-30520 . 05-30620 . 24 6” 05-29824 . 05-29924 . 05-30524 . 05-30624 . Diameters not listed are available as a special order in full lengths only. Order CAT 2-3/4” diameter for Whisperflow air vents. Full factory lengths are 10 ft. on CAT and CEET and 12 ft. on SCAT & SCEET. Flange Size Part No. Price 1” 10350-4 . 1-1/4” 10350-5 . 1-1/2” 10350-6 . 1-3/4” 10350-7 . 2 10350-8 . 2-1/4” 10350-9 . 2-1/2” 10350-10 . 2-3/4” 10350-11 . 3” 10350-12 . Discount: 10% On 20; 15% On 50, 20% On 100 (Assorted) 125 CM WP ME HA AP LG EP CS IN EL AV TO PS BV SOUNDPROOFING – INSULATION NOXUDOL SOUNDPROOFING LIQUID A paint-on soundproofing material that is applied to metal surfaces to reduce vibration and reverberant noise. Use to fill cracks and spaces where noise can enter. Buff color and can be painted. Paint engine mounts to increase fire resistance! Odorless and non-toxic when dry. Waterbased product. Non- Flammable. Shelf life: 1-year. Not FAA approved. Quarts .......... P/N 09-42740 .................. Gallon........... P/N 09-00772 .................. SUPER SOUNDPROOFING TAPE This is a 1/8” thick by 2” wide self adhesive tape that can be placed on metal panels and wrapped around ducts to reduce vibration and reverberant noise transfer. Not FAA approved. 30 ft. rolls. 2” wide P/N 09-42745.................................../ea. 1” wide P/N 09-00381.................................../ea. SUPER SOUNDPROOFING FLOOR MAT This heavy duty, wear resistant vinyl mat with foam backing can be placed on aircraft floors to reduce noise & vibration. 54” width. FAA approved. ................................... P/N 09-42750.................... ./lin.ft. Floormat 4” wide X 25’ Roll................ P/N 09-00433....................... ./roll Floormat without foam backing .......... P/N 09-42751.................... ./lin.ft. HOW TO SOUNDPROOF LIGHT AIRCRAFT This excellent book explains how to properly use the soundproofing materials below to best reduce noise and vibration in your aircraft cabin. Illustration; 20 pages. P/N 09-42755 .................... FREE SUPER SOUNDPROOFING SHEET WITHOUT ADHESIVE This material is excellent for reducing noise levels in all types of certificated and homebuilt aircraft. It is a closed cell vinyl insulating material which will not absorb water or oil. Has fire retardant qualities and meets FAR 25.853a Appendix F, Pt1. It is smooth on one side for easy attachment to the inside cabin skins, sides, top and front firewall. Excellent for helicopters as well. Furnished in bulk 48” wide sheet, it is easily cut by scissors and attached with contact cement. Available in black only. The Flammability Report (Burn Certs) are available on request. Thick- ness Wt. / Lineal ft. P/N 09- Price Per. Lineal Ft. Thick- ness Wt. per Lineal ft. P/N 09- Price Per. Lineal Ft. 1/8” .25 lbs. 42719 . 3/4” 1.4 lbs. 42727 . 1/4” .60 lbs. 42720 . 1” 2.0 lbs. 42730 . 3/8” .80 lbs. 42723 . 1-1/2” 3.0 lbs. 72731 . 1/2” 1.0 lbs. 42725 . 2” 4.0 lbs. 42760 . E-A-R-COMPOSITE DAMPING FOAM ADC-224 is a mid-temperature skin damping compos- ite of 0.25” thick damping foam fixed with 0.005” thick aluminum foil and backed with pressure sensitive adhe- sive. Used in aircraft for weight efficient damping and to reduce radiated noise. Meets FAR 25.853 (A) for fire resistance. Furnished in 27” x 48” sheets. P/N 09-00181................. / sheet Less 10% discount on 10 or more sheets SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS! TEFLON ANTI-CHAFE TAPE ISD Chafe Tape is a durable Teflon material with a pres- sure sensitive adhesive which resists solvents, and oils. Designed specifically to prevent aluminum chafing between airframes and engine cowls. It helps prevent black streak- ing on aircraft exterior due to cowl chafing. Not FAA/PMA approved. Operable temperature range: -100°F to +500°F. Width: 1”. Roll length: 6 yds. Tkns: .012” P/N 09-31805 ............................... ./roll COWLING CHAFE SEAL Off-white, 100% non-asbestos woven tape. Unaffected by most chemicals and temperatures. 15’ roll. 1” P/N 09-31800 ..................... . rl TEFLON COATED FIBERGLASS ANTI-CHAFE TAPE These 1’ wide rolls of Teflon on fiberglass anti-chafe tape are excellent for use on engine cowlings to keep cowl compo- nents from chafing. The tape is available in 5 mil thick and 10 mil thick and comes with a silicone adhesive on the tape. Just peel back liner and install. Rolls are 1” wide x 36 yds long. 5 Mil Anti-Chafe tape .......... P/N 05-01024 ................../roll 10 Mil Anti-Chafe tape ........ P/N 05-01025 ................../roll 3M™ SOUND & VIBRATION DAMPING PANELS Designed for damping resonant vibrations of thin sheet metal, these panels are pressure sensitive, specially compounded polyurethane damping foam with an aluminum foil backing. The adhesive on the foam is protected by a peel-off paper covering. It is an excellent insulator for conducted heat and is an excel- lent heat reflector. Fire-resistant and self-extinguishing per FAA test procedure. Excellent moisture resistance. Resistant to most solvents. Easily applied with only hand pressure for a permanent bond even on rough, irregular surfaces. Used extensively in commercial aircraft and highly recommended for metal home builts. Apply to firewall, fuselage — anywhere a vibration problem exists. Wt.4 oz./sq. ft., 1/4” thick. 3M Sound Damp Panel 6” x 48”............ P/N 09-30206 ................... . ea. 3M Sound Damp Panel 12” x 48”.......... P/N 09-30212 ................... . ea. 3M Sound Damp Panel 18” x 48”.......... P/N 09-30218 .................... .ea. Less 15% on 12 or more pieces FOR OTHER 3M™ PRODUCTS SEE PAGES 345-352 ALUMINUM FOIL TAPE A 2 Mil. (50 micron) high strength aluminum foil coated with an aggressive, high temperature acrylic adhesive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces. Coated with a special cold weather acrylic pres- sure sensitive adhesive system which combines superior quick stick at normal temperature with superior low temperature performance below freezing - this is the ultimate in cold weather tapes. Recommended for use at normal and elevated temperatures also. Applications: Primarily used for vapor sealing fiberglass ductboard and sheet metal ducts; can also be used on FSK systems.tape described above.2” x 25 Yd. Roll. Description Part No. Price Description Part No. Price 1”X 25YD 09-01273 . 4”X25 YD 09-01275 . 2”X 25 YD 09-01274 . 6”X50 YDS 09-01276 . SUPER SOUND PROOF WITH ADHESIVE Super Soundproofing Foam Mat for noise control: A closed cell vinyl-nitride noise control FOAM suitable for application to cars, boats, planes, home and office, anywhere a noise control mat is needed. Won’t absorb moisture or odor, long lasting and durable. An excellent thermal insulator! (FAA Approved for aircraft, too!) Just apply with vinyl or contact cement to reduce and absorb sound. 1/8” w/adhesive ......................P/N 09-01243 ................................ 1/4” w/adhesive ......................P/N 09-01244 ................................ 3/8” w/adhesive ......................P/N 09-00443 ................................ 1/2” w/adhesive ......................P/N 09-00444 ................................ 3/4” w/adhesive ......................P/N 09-01245 ................................ 1” w/adhesive .........................P/N 09-01246 ................................ 2” w/adhesive.......................P/N 09-01247 .............................. UNI-WRAP SILICONE TAPE RUBBER SELF-BONDING TAPE UniWrap silicone rubber sealing tape bonds to itself perma- nently to protect, repair, join, or insulate virtually any type of part on which ordinary tape can be used. But the big difference between UniWrap and ordinary tape is that it fuses to itself permanently to form a homogenous mass and provides unprecedented protection and insulat- ing characteristics. UniWrap uses no adhesives so it is non-tacky. It has a 12 month shelf life and after fusing is unaffected by moisture, cold, heat, ozone shock, or vibration. Meets MIL-I-46852 Type II as well as strict aerospace industry performance requirements. Available in red, black, gray, or white. Furnished in 10 yard rolls, UniWrap is 1” wide and 0.020” thick UniWrap (red) P/N 09-30450............................ SOUND EX KITS SoundEx™ is a premium aircraft soundproofing / in- sulation that incorporates excellent vibration damp- ing and noise absorption properties. SoundEx™ is a superior product compared to other products on the market because of it’s thermal qualities, adds less weight to aircraft (4.5 oz. per sq. ft. for 1-1/8” thick- ness and 3 oz. per sq. ft. for 7/8” thickness), and affordability. Materials are available in bulk or soundproofing template kits. Stop the yelling and make flying fatigue a thing of the past. Improve your quality of flight with SoundEx™. SEE WWW.AIRCRAFTSPRUCE.COM FOR A LIST OF SOUND EX AIRCRAFT KITS AND BULK MATERIAL. 126 CM WP ME HA AP LG EP CS IN EL AV TO PS BV ORCOTEK STRIP BLANKET Aircraft insulation by the foot. This durable, state-of-the-art, light weight blanket meets the thermal and acous- tic requirements of the major aircraft manufac- turers and is now avail- able for your airplane. The blanket consists of fiberglass enclosed in moisture barrier. It can be used as is or cut in special shapes. Use Orcotape OT-16A 2” or 3” tape to seal the open edge(s) of the blanket. Strip blanket available in 1” thick x 20” wide or 2” thick x 20” wide. 1” thick x 20” wide..............P/N 09-45015 ......................./linear ft. 2” thick x 20” wide..............P/N 09-45020 ......................./linear ft. INSULATION MATERIALS INSUL-TAPE AIRCRAFT INSULATOR MATERIAL This pressure sensitive aluminized foil tape conforms to irregular surfaces, seals seams and joints and provides a vapor barrier. Also mends damaged Insulator foil. Cuts easily with household scissors. 30’ roll..............................P/N 09-27420 .............................. ./ea. BLANKET IN-A-BOX Insulating your aircraft made easy! Blanket is ready to install as is or can be modified to fit special areas. Each box contains all the materials to insulate your aircraft including an Orcotek strip blanket, tape, cutting knife, instructions and built-in work surface with measuring grid. FAA8110-3 airworthiness certificate in each box. Furnished as follows: 1” blanket-in-a-box contains 1 roll (1”x20”x100’) Orcotek strip blanket, 2 rolls of Orcotape OT-16A (2”), utility knife, dispenser box-work platform P/N 09-45005................................ ./box 2” blanket-in-a-box contains 1 roll (2”x20”x50’) Orcotek strip blanket 1 roll of Orcotape OT-16A (3”), utility knife, dispenser box/work plat- form P/N 09-45010............................... ./box AIRCRAFT CARPET TAPE Orcotape OT-40 is a double-sided, pres- sure sensitive cloth tape used to adhere to floor coverings, such as carpet to aircraft flooring and meets the require- ments of FAR 25.853. Furnished in a 25 yard roll. 2” width ..... P/N 09-00402...................... INSULATION REPAIR & FABRICATION TAPE Orcotape OT-16A is a lightweight, pressure sensitive, reinforced, met- allized polyvinyl fluoride tape which is designed to be used in the fabrica- tion, repair & installation of thermal/ acoustic blankets. It is the com- panion tape to be used with the Orcotek strip blanket to seal the edges. Furnished in 60yd rolls. 2” width................ P/N 09-45040.........................../ea. 3” width................ P/N 09-45045.........................../ea. THE INSULATOR AIRCRAFT INSULATOR MATERIAL The Insulator is one of the finest sound proofing and thermal insula- tion materials available, and will last the life of the aircraft. The dual sided Insulator panels are ideal for installation on interior skin, floor, engine covers, doors, headliners, and bulkheads. The Insulator uses multi - layered fiber plys bonded to reinforced high performance foil to provide optimum barrier to acoustics, radiant heat, thermal heat, and moisture. Insulator is available in 4’x 6’ panels or by the lineal foot (4’ wide). Install Insulator with Sticky Stuff spray adhesive (shown below) and Insul-Tape. Not FAA approved. INSULATOR PANELS Insulator – one ply 4’ x 6’ sheet........... P/N 09-27400................. . ea Insulator – two ply 4’ x 6’ sheet ........... P/N 09-27405................. . ea Insulator – two ply 2’ x 6’ sheet ........... P/N 09-00282................. . ea Insulator – three ply 4’ x 6’ sheet......... P/N 09-27410................. . ea Insulator – three ply 2’ x 6’ sheet......... P/N 09-00283................. . ea Discount: less 15% on orders for 20 sheets (assorted) INSULATOR BY THE FOOT Single side foil, single layer #6014; 4 ft. wide. P/N 09-06014.................. /ft. Double side foil, single layer #6016; 2 ft wide ............ P/N 09-00275.................. /ft. 4 ft wide ............ P/N 09-06016.................. /ft. Double side foil, double layer #3200 P/N 09-00226.................. /ft. Discount: less 15% for 100 ft. (per P/N) STICKY STUFF ADHESIVE Stick Stuff is one of the best performing spray adhesives avail- able. It is ideal for installing the Insulator and has many other uses. One spray can will install two 4’ x 6’ panels. P/N 09-27415................../ea. VALCO CINCINNATI MULTI-PURPOSE SEALANT Valco Cincinnati multi-purpose sealant is a paste-like, one component material that cures to a tough, rubbery solid upon exposure to moisture in the air. Because it does not flow due to its own weight, this sealant can be applied overhead or on sidewall joints and surfaces without sag- ging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, and painted and many plastic surfaces. Valco mutli-purpose sealant has good resistance to weath- ering vibration, moisture, ozone and extreme tempera- tures. It may be applied in subzero weather without loss of extrusion or physical property characterisitics and is effective to -46°C (-50°F). Fully cured Valco multi-purpose sealant can be used for extended periods at temperatures up to 204°C (400°F), and for shorter periods as high as 218°C (425°F) 2 oz. tube...................... P/N 09-00277............................... 7 oz. tube...................... P/N 09-00278............................... VHT FLAMEPROOF COATINGS Originally designed for NASA’s reentry spacecraft, VHT FlameProof is a scientifically formulated com- pound designed to withstand temps. up to 1500°F (816°C) VHT It survives where other paints can’t, shields & protects, maintains the finish, prevents rust & corrosion, and resists oils & solvents. For aircraft applications the typical use is on high temperature steel components such as exhaust & turbocharging systems. Excellent for use as a heat resistant & anti- corrosion coating on exhaust manifolds and turbine casings. Both Flat Aluminum and Flat Black are non-facing colors. Flat Aluminum 16 oz. aerosol spray............P/N 08-00713 .................... . Flat Black 16 oz. aerosol spray...................P/N 08-00714 .................... . Flat Black Quart Can...................................P/N 08-00716 .................... . CONTEGO FIRE BARRIER LATEX PRIMER -THE FIRE STOPS HERE- Contego protects most building materials from the rav- ages of fire. Contego intumescent fire barrier products are all non-toxic, non-dermatic, and safe for pets. When exposed to fire, Contego fire retardant coatings expand to form a tough char barrier fire cannot penetrate. Deprived of fuel, the fire quickly dies. Contego not only helps prevent fires, it minimizes deadly smoke produc- tion, one of the leading causes of fatalities in residential and commercial fires. Intumescent fire barriers are nothing new, but Contego Passive Fire Barrier Latex represents a quantum leap forward in terms of quality, versatility, affordability and fire safety-all in one truly impressive fire proofing product. P/N 05-02615...................... 127 CM WP ME HA AP LG EP CS IN EL AV TO PS BV BAFFLING MATERIAL FIBERFRAX A new material made from washed ceramic fibers with binders added to form a lightweight, flexible asbestos-free insulation. Withstands temperatures to 2300° F. Excellent for aircraft firewalls. Available in 24” wide rolls in 1/16” and 1/8” thicknesses. 1/16” Thick........... P/N 05-02678 ............... Lin ft. 1/8” Thick............ P/N 05-02679 ............... Lin ft. Discount Less 15% On 50Ft. Per Size FIBERFRAX ADHESIVE Recommended adhesive for installing Fiberfrax is QF-180 Hi-Temp White Glue. Coverage: 15 sq. ft. per pint & 120 sq. ft per gallon. Fiberfrax Adhesive Pt............. P/N 05-00800..................... . Fiberfrax Adhesive Gal........... P/N 05-00900....................... NEOPRENE BAR Neoprene bar of proper Shore hardness for fabri- cation of shock absorber donuts. Used in Osprey II nose gear. Available in 2 sizes: 1/2” Th x 2” W........... P/N 05-02000................. ./ft. 3/4” Th x 3” W........... P/N 05-02100................. ./ft. RUBBER SHEET PACKING Will not deteriorate in petroleum products. Recom- mended for oil and solvent service. Meets spec- ification MIL-R-6855. Wt. 6 oz. per sq. ft. 1 Size: 1/16” thick x 36” wide roll. Sold in 36” 1 width only. Price is per Lin. Ft. P/N 05-01000 ....................... . Discount: Less 15% On 20 Ft. HEAT-PROOF TAPE Heat-proof and fire resistant. Made of woven fiber- glass. Non-metallic, commercial grade. Withstands up to 1000°F. 2” wide x 1/16” thick. Wt. 4-1/2 lbs. per 100 ft. roll. .......................... P/N 09-31500....................... ./ft. Less 15% On 100 ft. NEOPRENE COATED PYROGLASS CLOTH This neoprene coated cloth is designed for applications where its superb heat and flame resistance provide an extra margin of protection for people and equipment. Self-extinguishing, it is used as aircraft firewall barriers, protective sleeves and tadpole tape covers, flat seals, gaskets, mounts and door seals. It is ozone and weather resistant, and can be used against caustics, gasoline, oil, water and steam. It does not support combustion and will operate in continuous temperatures from -40°F to +200°F. Thickness .070“. Sold in 40” Width only. P/N 05-00600........................ . ft. INSPECTA-SHIELD FIRE RETARDANT PENETRANT Inspecta-Shield is a durable, non-toxic, fire retardant chemical penetrant which when cured and dried, is odorless and colorless. Inspecta-Shield will retard flame in materials such as fabrics, poly foam, paper, and wood. The flame protection will generally last for the life of the product to which it has been applied. Inspecta-Shield is environmentally compatible and will protect surfaces up to 2,200°. In addition, when it is applied to fabrics, upholstery, carpets or wood, these surfaces will retain their color and resist sun rot up to 50% longer. Inspecta-Shield is a Class A rated flame retardant that meets F.A.R. 25.853 (a & b). 1qt. spray bottle will treat an area of 150 sq. ft. Can be applied with most garden and household sprayers. Note: Inspecta- Shield is corrosive to aluminum and other metals. If it comes in contact with metals be sure to wipe off metal and clean thoroughly Qt. ....................... P/N 09-05760 .......................... Gal. ..................... P/N 09-00274 .......................... PRE-CUT PYROGLASS CLOTH BAFFLE STRIP Cut from Pyroglass cloth above. 3”x 84” ........ P/N 05-00700................ . FIREWALL BLANKET Firewall blanket is black in color and comes 48” wide. Looks best when in 3’ sections, anything larger has seams and stitching lines do not match well. Note: This material is used for cosmetic purposes on the inside portion of a firewall to cover up an unsightly firewall. It is not fireproof and is not an actual firewall material. Sold by the foot. P/N 09-00276......................... . /Linear ft. FIREWALL 2000 CERAMIC BLANKET This blanket is .250” thick, weighs only 9.5 oz/sq. ft. and is flexible enough to cover compound curves. The heat side of the blanket is covered with stainless steel, the other side is aluminum It is easy to rivet or can be glued into position. Sold by the running foot. Temp. range up to 1000°F.24” wide P/N 05-00948 .................................. Less 15% on 25ft. roll 3M™ FIRE BARRIER 2000 A premium nonslump sealant bonds to most common construc- tion material to form a flexible seal. Superior Adhesion. Remains elastomeric and is weather resistant. This product is great for through penetrations and may also be used for fire rated con- struction joints. P/N 05-00949 .................................. FOR OTHER 3M™ PRODUCTS SEE PAGES 345-352 FIREWALL 2000 KIT Contains 24”x48” sheet of Firewall 2000 and one tube of firewall caulk. Flammable. P/N 05-00950 .................................. KOOLMAT HEAT BARRIER Koolmat Insulation is a .070 thick fiberglass tex- tile cured to a 1/8” silicone substrate. The latter providing a good wear resistant surface. Used by NASCAR, Winston Cup race teams as a firewall/ floor safety and comfort heat barrier for drivers and has applications in the homebuilt aircraft field. It can be used on steel, aluminum, fiberglass, wood and plastic surfaces. It is good to temperatures up to 1000° F and reduces cockpit heat up to 75%. Contains no asbestos. Can be used to insulate cowl and firewall forward area. (Not used on exhaust) Color: gray on top side (silicone) and white woven cloth (fiberglass). Wt: .72 lbs. per sq. ft. Sold in 30” width by the lineal foot. Gray..................... P/N 09-24730.......... ................ ./lin ft. Beige ................... P/N 09-01277.......... ................ ./lin ft. SEE THE ENGINE PARTS SECTION OF THE CATALOG FOR MORE INSULATION PRODUCTS! COWL SAVER BAFFLE SEAL MATERIAL Cowl Saver™ Baffle Seal Material has 10 times Less Friction! One side is silicone and the other is the revolutionary friction free surface unique to the patent pending Cowl Saver™. Cowl Saver™ dramatically reduces the friction between your cowl and baffle seals. Low Friction Saves You Money! Reduces transfer of damaging engine vibration to the engine cowl Mini- mizes cowl chaffing and erosion from baffle seals. Extends baffle seal life. Reduces expensive cowl and cowl fastener repairs. Reduces fa- tigue and cracking in aluminum baffles and cowl skins. The cowling even goes on easier! Unbeatable Performance. Ideal balance of flexibility and stiffness to insure a proper seal. Fiberglass reinforced. Meets industry standard AMS3320G specification. McFarlane quality you can count on! Not FAA-PMA approved ACCESSORIES 6036 BAFFLE SEAL RETAINER STRIP - A baffle seal retainer strip used as a retainer for riveting baffle seals to baffles. Designed to be cut to desired lengths during installation. PN 05-03399 ......................... RIVET KIT 2 - A baffle seal rivet kit containing soft Mil-Spec rivets that will not deform the baffles. Several sizes are included for various baffle thickness and hole sizes. PN 05-03401 ......................... BAFFLE-KIT-1 - A convenient kit that includes (1) CS085X3X108G Cowl Saver™ Baffle Seal Material, (1) RIVET-KIT-2 Soft Rivets, (5) 6036 Re- tainer Strip PN 05-03402 ......................... BAFFLE-KIT- 2 - This new baffle kit with more material. This kit is best for larger aircraft or curved baffle seals that cannot be cut from three inch strips. The new kit includes (1) 18x36 inch piece of Cowl Saver™ mate- rial, (2) Baffle Seal Rivet Kits and (10) Baffle Seal Retaining Strips. PN 05-04108 ......................... Part Number Thickness Size Color Spruce PN Price CS085X36X36G .085” 36” x 36” Gray 05-03403 . CS085X18X36G .085” 18” x 36” Gray 05-03404 . CS085X3X108G .085” 3” x 108 “ Gray 05-03405 . Baffle Seal Cowl Friction between baffle seal and cowl transfers engine motion and vibration SILICONE SEAL WITH ADHESIVE A general use silicone with an acrylic sticky backing. Can be used as any silicone seal where a sticky backing is used, such as Battery Box Covers (top), and Baffle anti-chafe (prevent wear between metal baffles and cylinder head fins) Low temp use only: 0 to +300 Thickness is .050" Size Part No. Price 6"x6" 05-04254 . 12"X36" 05-04253 . 18"X36" 05-04252 . 36"X36" 05-04255 . 128 CM WP ME HA AP LG EP CS IN EL AV TO PS BV RUBBER CHANNEL - COWL SEAL QUARTER ROUND SOLID DOOR SEAL - Closed cell black neoprene with smooth outer surface. 1/2” Legs, 3/4” Curve, 1/2” Radius. 25 ft. Roll P/N 05-00000 ....................................... . PIPER DOOR SEAL - Used on Piper, Mooney and oth- ers, small cell sponge rubber. Packaged in 25 foot rolls JM189139. 25 ft. Roll P/N 05-00010 ....................................... . BAGGAGE DOOR SEAL - Flexible small cell sponge rubber seal used on many aircraft baggage doors. Packaged in 25 foot rolls. 25 ft. Roll P/N 05-00020 ....................................... . PIPER WING ROOT SEAL - Black packaged in 12-foot lengths, adequate for one wing root. 12 ft. Roll P/N 05-00030 ....................................... . BEECH WING ROOT SEAL - Black, packaged in 12-foot lengths, adequate for one wing root. 12 ft. Roll P/N 05-00040 ....................................... . J-3, PA-18 DOOR GAP SEAL - 24” length Standard color, black. P/N 05-00953 ....................................... . Note: The above moldings are not FAA approved. ANTI-CHAFE MOLDING Anti-Chafe Molding for fuel tank straps. Neoprene channel accommodates metal straps 1” wide. #9.......................P/N 05-01800 ....................... ft Made in 12’ Lengths - #4................P/N 05-01500 ................ Ft. Neoprene sponge rubber 1/4-round door seal. Hollow core is more effective than solid core and makes a better seal. Manufactured in 25 Ft. lengths. #7..................... P/N 05-01700 ............................ Ft “V” STRIP “V” Strip Canopy Channel 20 Ft. required for Long-EZ. #10 .....................P/N 05-01900 ...................... . ft COWL SEAL HARDWARE & TOOLS GB4-3A: Rivet - (Button head) 1/8” Dia. x 3/16” Grip - This rivet is used for mounting the baffle seal behind the metal baffle. This method requires a metal baffle strip or back-up washer to secure the seal to metal baffle Pkg. of 100 ...... P/N 05-56100 ............. . GB-A4: Back-up Washers 1/8” Dia. x 1/4” Grip Pkg of 150 ....... P/N 05-56130 ............. . GB-SF- 3/16: Screw Fastener (Post Type) Used for joining sides or overlapping of baffle material. P/N 05-56140 ............. . GB4-3AW: Rivet (white) 1/8” Dia. x 3/16”Grip (button head) Qty. 100 ........... P/N 05-56132 ............. . GB4-3AB: Rivet (black) 1/8” Dia. x 3/16”Grip (button head) Qty. 100 ........... P/N 05-56133 ............. . GBL4-3A: Rivet (Large Flange) 1/8” Dia. x 3/16”Grip Qty. 100 ........... P/N 05-56134 ............. . GBL4-2AW: Rivet (Large Flange white) 1/8” Dia. x 1/8”Grip Qty. 100 ........... P/N 05-56135 ............. . Silicone Revolving Punch Tool: Makes various size holes in baffle material. P/N 72......................... . BAFFLE FASTENER KIT This engine baffle fastener kit makes attaching baffle material much easier. The kit includes 12 soft aluminum fasteners. 1 Set ................................P/N 05-56140 ..................... . Pkg. of 12 Sets................P/N 05-01829 ..................... . SILICONE COWL SEALS This silicone rubber is excellent for replacement of baf- fle seals as it exceeds asbestos type seals in durability and flexibility over its entire operating heat range of -80 F to +425 F. Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3320. Available in red, blue & black. IRON OXIDE RED 3/32” thick x 3” wide x 9’ long ................ P/N 05-00775 ................... . 3/32” thick x 36” wide ............................. P/N 05-00781 ................... . /ft 3/32” thick x 3” wide ................................ P/N 05-00781-3 ................ . /ft 1/8” thick x 2” wide x 9’ long ................... P/N 05-00795 ................... . 1/8” thick x 3” wide x 9’ long ................... P/N 05-00755 ................... . 1/8” thick x 4” wide x 9‘ long ................... P/N 05-00760 ................... . 1/8” thick x 36”wide ................................. P/N 05-00772 ................... . /ft 1/8” thick x 2” wide .................................. P/N 05-00772-2 ................ . /ft 1/8” thick x 3” wide .................................. P/N 05-00772-3 ................ . /ft 1/8” thick x 4” wide .................................. P/N 05-00772-4 ................ . /ft 1/8” thick x 3”W x 9’ (w/fiberglass mat)... P/N 05-00770 ................... . 1/8” thick x 36”W (w/fiberglass mat)........ P/N 05-00771 ................... . /ft 1/8” thick x 3” wide (w/fiberglass mat)..... P/N 05-00771-3 ................ . /ft LIPSTICK RED 3/32” thick x 36” wide .............................. P/N 05-00786 ................... . /ft 3/32” thick x 3” wide ................................ P/N 05-00786-3 ................ . /ft DARK BLUE 3/32” think x 3” wide x 9’ long ................. P/N 05-03055 ................... . 3/32” thick x 3” wide ................................ P/N 05-01831-3 ................ . /ft 3/32” thick x 36” wide .............................. P/N 05-01831 ................... . /ft BLUE 3/32” thick x 3” wide x 9’ long ................. P/N 05-00790 ................... . 3/32” thick x 36” wide .............................. P/N 05-00806 ................... . /ft 3/32” thick x 3” wide ................................ P/N 05-00806-3 ................ . /ft 1/8” thick x 3”W x 9’ (w/fiberglass mat).. P/N 05-00792 ................... . 1/8” thick x 36”W (w/fiberglass mat)....... P/N 05-00791 ................... . /ft 1/8” thick x 3” wide (w/fiberglass mat)..... P/N 05-00791-3 ................ . /ft BLACK 3/32” thick x 3” wide x 9’ long ................. P/N 05-00810 ................... . 3/32” thick x 36” wide .............................. P/N 05-00811 ................... . /ft 3/32” thick x 3” wide ................................ P/N 05-00811-3 ................ . /ft 1/8” thick x 3”W x 9’ (w/fiberglass mat).. P/N 05-00826 ................... . 1/8” thick x 36”W (w/fiberglass mat)....... P/N 05-00825 ................... . /ft 1/8” thick x 3” wide (w/fiberglass mat) ... P/N 05-00825-3 ................ . /ft OPEN SEAL 1/2” Legs 3/4” Curve 3/8” Radius HIGH QUALITY RUBBER CHANNEL Good-grade neoprene. Soft, flexible, oil-resisting. Style B: 1/2” high - right, 3/8” high-left, 1/16” Groove 05-00596.........../ft Style C: 3/8” high, 1/8” groove, 1/4” across bottom . 05-00597.........../ft Style D: 1/2” high - left, 3/16” - right 1/32” Groove... 05-00598.........../ft Style E: 1-1/8” high, 1/4” lip right side, 1/16” Groove .. 05-00599.........../ft U CHANNEL BLACK 65 DURO EPOM U-CHANNEL. AIRCRAFT BAFFLE SEAL KITS These pre-cut baffle seal kits are cut to original specifications. Please specify aircraft make, model, serial number, and color of seal. Kits are furnished with rivets, washers, drill bits, & silicone. Use CRL Glass and Acrylic Setting Rubber Channels if you have acrylic or glass panels you need to protect. Our Glass Setting Rubber Channels will provide you with the product you need. Available in multiple sizes for most applications. Groove P/N Height Price/Ft. 1/16” 05-01300 6/16” . 1/16” 05-01400 6/16” . 1/16” 05-01600 1/2” . 1/16” 05-02200 6/16” . 1/8” 05-00951 1/4” . 1/4” 05-00952 6/16” . CESSNA CHAFE SEAL This seal is riveted to the firewall on the Cess- na 150, 152, 172, and 182. Meets MIL SPEC: AMS3320-.093 black. 1-1/2" wide x 84" long. P/N 05-04489.......................... 129 CM WP ME HA AP LG EP CS IN EL AV TO PS BV CHAFE SEAL - DOOR SEALS BEECHCRAFT COWL DOOR CHAFE SEAL A Complete set of black silicone chafe seal for the upper cowl doors for Beech models 33, 35, 36. 3/8” wide X .020 thick. Kit includes silicone cement. P/N 05-00665 .......................... . BEECHCRAFT NOSE GEAR CHAFE SEAL A Complete set of black silicone nose gear door seals designed to keep the nose gear doors from chaf- ing against the airframe. Fits models 33, 35, 36. Kit includes silicone cement........ P/N 05-00666 ............... BEECHCRAFT MAIN LANDING GEAR DOOR CHAFE SEAL A Complete set of black silicone chafe seals cut to the original design. These seals are cemented to the underside of the wing to reduce the chafing of the main landing gear doors when closed. P/N 05-00667........................... . BEECHCRAFT TAIL ROOT SEAL A set of two tail root seals for models 33–36. P/N 05-00669............................ . BEECHCRAFT RUDDERVATOR SEAL A set of two ruddervator seals for model 35. P/N 05-00670.............................. BEECHCRAFT UPPER WING SEAL A set of two upper wing seals for models 33, 35, 36, 55, 58. Includes lower wing seals (2)......P/N 05-00668.................. SILICONE AIRBOX & HEATER SEAL This fiberglass reinforced silicone seal (1/16” thick) makes an excellent replacement for various airbox and heater box seals used in a variety of aircraft. Furnished as a 6” x 6” piece; Black. P/N 05-00662 ............................ SILICONE GBP SEAL WITH 5/8” BULB This seal makes an excellent replacement for felt type seals or other neoprene P-seals found in various aircraft. Overall size is 1-3/8” with a 5/8” bulb. Similar to Cessna #S2729-1 .......................... P/N 05-00663 .................. ./ft. GB56 SILICONE ANTI-CHAFE SEAL The kit includes: 15 Foot Roll with Adhesive, Anti-Chafe Seal and Catalyst.Sold in 15ft. rolls. P/N 05-00664 ..................... EPDM WEATHERSTRIP Self-adhesive rubber strip, made in Sweden of 100% EPDM rubber. Resistant to aging, weather, ozone, ultraviolet sun rays and many chem- icals and solvents. Retains resilience at low temperatures (to - 45°F). Excellent for all types of weatherstripping and canopy installations. Furnished in three sizes P-STRIP Furnished in full rolls as a double-width strip which splits in the middle to give two single-width P-strips as illustrated. 17 Ft. Roll 1/4” thick x 3/8” wide. COLOR: WHITE P/N 05-01200 ............................... . Ea. D-STRIP WEATHERSEAL 17’ Roll 5/16” thick x 23/64” wide. (2) 8-1/2’ strips. P/N 05-00897 ....................................... ALL STRIP WEATHERSEAL 10’ Roll 5/16” thick x 19/64” wide. P/N 05-00898............................ . Ea. PIPER DOOR SEALS This new seal was developed from a special rubber compound that meets military specifications and FAA requirements for aircraft seals. Has a memory, com- presses and conforms to the sealing surface providing a perfect seal. Comes with pressure sensitive adhesive that makes it easy to apply and bonds well with any metal surface paint- ed or bare. Installs in the channel on the fuselage opening, which allows for complete closing and sealing of the doors. Provides for an air- and water-tight seal. Also a kit designed for the baggage doors. FAA-PMA approved. Detailed instructions, an engineering drawing for installation of the new seal, including instructions for adjustment of the door as well as removal of the old seal from the door(s). Please call or visit our website for additional photos and models. SILICONE CEMENT FOR CHAFE SEAL This silicone cement is the same cement that is included with some of the chafe seals on this page and is excellent for attach- ment of chafe seals. 2 oz. P/N 05-00996............................ • Mooney Door Seals •Call for Quotation • Experimental • Provide Door Dimensions for Quotation BLACK SILICONE SEAL 7/8 INCH This seal makes an excellent replacement for felt type seals or other neoprene P-seals found in various air- craft. Overall size is 1-3/8” with a 7/8” bulb. P/N 05-02144 ............................. AVTEK SQUEEZE-OUT DOOR SEAL KITS Door Seal keeps water, cold, wind and noise out of your aircraft. The seal is designed for use on multiple aircraft make/model applications. The -02 is shipped with dual Air-Chambers.The installer can split the chambers using one near the hinges, where gaps are small, use two of three chambers in the rear where the gaps are larger. The -02 is very versatile, and works great on every aircraft, where as the -01 may not. Get the -01/-02 combination kit if you are unsure! CESSNA DOOR SEALS The new seal installed on the fuselage enables the door to fully close and be air and water tight. The new seals are FAA-PMA certified for all Cessna single engine aircraft including the 336 and 337 twins. Cessna Entry Door Seal................................ P/N 05-01610................... Cessna Window Seal .................................... P/N 05-01611................... Cessna Baggage Door Seal.......................... P/N 05-01612................... Cessna AFT ENT/CARGO Door Seal........... P/N 05-01613................... Cessna 207 Front Bag Door Seal ................. P/N 05-01614................... Description Part No. Price PA-28 Front Entry Door 05-01240 . PA-28 Rear Baggage Door 05-01241 . PA-32 Front Entry Door 05-01242 . PA-32 Front Baggage Door 05-01243 . PA-32 Rear Entry Door-No Cargo Door 05-01244 . PA-32 Rear Entry Door w/Cargo Door 05-01245 . PA-34 Front Entry Door 05-01246 . PA-34 Front Baggage Door 05-01247 . PA-34 Rear Entry Door w/Cargo Door 05-01248 . Mooney Baggage Door 05-02481 . Mooney Vent Window 05-02483 . Front Mooney Baggage Door 05-02482 . Description Use Features Part No. Price AvTek Squeeze- Out Door Seal -01 Not Recommended for Most Aircraft. Use for Large Gaps in Cabin Doors. Ear-Popping Tight 05-01504 . AvTek Air Chamber Door Seal -02 Recommended for All Aircraft. Fwd-Aft Cabin Doors & Bag Door. Flex, E/Z Conform Will Not Push Door-Out 05-02198 . AvTek Thin Seal (Window) -03 Recommended for Cessna & Beech. Use for Windows, Paper-Thin Door-Gaps Seals When No Other Seal Will 05-02199 . AvTek Thin Seal (Door) -03 Recommended for All Aircraft. Use for Very Small Gaps in Doors Seals When No Other Seal Will 05-02201 . AvTek Thicker Seal (Door) Recommended for All Aircraft. Seal installed on the door. Resist Mil- dew, Mold, & Tearing 05-02202 . Air Squeeze Kit (Combo Kit of the Two Best Seals) Squeeze-Out-01 & Air Seal-02 Recommended for All Aircraft Squeeze-Out: Top & Rear of the Door Air-Seal: Bottom and Forward Door Where the Hinges are Located. Ear-Popping Tight, Flex, Ez Conform Will Not Push Door Out. 05-02217 . AVTEK GAP SEAL The “Spring-Steel” reinforcement channel has “Grip- per” teeth to hold firmly in place. And when your door is closed the seal is pinched between the air- frame. You can not pull the seal out when the door is closed...however applying adhesive into the channel is recommended. Length: 9ft. P/N 05-02203 ................................... HOMEBUILDERS GAP SEAL KIT FOR EXPERIMENTAL AIRCRAFT Designed for experimental aircraft that have been identified as needing gap seals to improve control response and effectiveness. Features transparent, UV stable film with a long aging, acrylic adhesive. Remains flexible down to -40 deg. F. Easy to install with the use of simple hands tools. Kit in- cludes 3M 8674 Film (PN 09-01643}, 86A Adhesion Promoter to ensure maximum adhesion, Scotchbrite pad (PN 09-01753) and 3M Application Solution (PN 06-00604) P/N 05-03480 ................................... BEECHCRAFT T34 CANOPY SEALS AMS 3303 silicone seal -65 to +350 for Beech- craft T34 Canopy Seals. Package includes: • 1 ea Canopy Seal 50.0 Long • 2 ea. Canopy Bumper Seal 21.0 Long • 2 ea Canopy Bum- per Seal 48.0 Long P/N 05-04247 ................................. . 130 CM WP ME HA AP LG EP CS IN EL AV TO PS BV INTERIORS SEAT SLINGS These canvas slings are available in Off-White or Olive Drab. All seat slings include front and rear slings except: Aeronca 65CA.............. 1pc PA-12 ............................ 3 pcs Piper J-3.................... 3 pcs Taylorcraft .......................1 pc PA-22 .......................... 1 pc Note: Complete Part Number with color. Use -1 for Off White or -2 for Olive Drab. A r ra t Part No. Pr Aeronca 65CA 09-17320- . Bellanca 09-17322- . Citabria 09-17325- . KR-1 & 2 09-17327- . A r ra t Part No. Pr Piper J-3 09-17330- . Piper J-5 09-17332- . Piper PA-12 09-17335- . Piper PA-22 09-17337- . Taylorcraft 09-17340- . 3M™ SUPER WEATHERSTRIP ADHESIVE For adhering all types of rubber weatherstripping to metal. Light colored adhesive, very fast drying, exceptional bonding strength. Can be used for adhering vinyl trim head liners and side panels. 5 oz. tube, #8001............P/N 09-27200 ................ 3M™ WEATHERSTRIP ADHESIVE Adheres firmly to metal and has quick tack necessary for holding pads and linings in place securely. Can also be used for sealing windshields between rubber and glass. 5 oz. tube, #8011............. P/N 09-27300 ................. 3M™ FAST TACK TRIM ADHESIVE This general purpose adhesive is used for bonding trim fabrics, floor mats, and rugs. Features quick tacking quality, does not bleed through fabric, and remains rubbery and flexible. Doesn’t dry hard. Excellent for upholstery repairs. 5 oz. tube, #8031...........P/N 09-27210 ................ 3M™ GENERAL TRIM SPRAY ADHESIVE This convenient sprayable adhesive is used for bonding a variety of trim fabrics. It is non-misting, very strong, light colored, and has a controllable spray pattern. 19.75 oz. Aerosol Can............. P/N 09-28330 .......................... SCOTCH GRIP RUBBER ADHESIVE This fast drying adhesive develops strength very quickly. It has excellent heat resistance; temperature performance is from -5 to 300°F. Meets specification requirements of MIL-A-1154C. Bonds neoprene, reclaim, SB-R, and butyl rubber to metal, wood, most plastics, and many other products. #1300L Qt Can .......................P/N 09-27220 ......................... A r ra t Part No. Pr Aeronca 7AC 09-17265- . Aeronca 11AC 09-17270- . Aeronca 120/140* 09-17275- . Cessna 150* 09-17280- . Cessna 172* 09-17285- . Cessna 310* 09-17290- . Ercoupe 09-17295- . Fairchild 24 09-17300- . A r ra t Part No. Pr Luscombe 8A 09-17302- . Piper J3 09-17305- . Piper J4 09-17307- . Piper J5 09-17310- . Piper PA12 09-17312- . Stearman 09-17315- . Taylorcraft 09-17317- . BAGGAGE COMPARTMENTS Note: Complete the part number with color choice. Use -1 for off-white or -2 for olive drab. Baggage Compartments are special order & non-returnable Our Baggage Compartments are custom designed and manufactured to provide your aircraft with a sturdy and attractive area for storing baggage, books, charts, etc. If your aircraft is not listed, please send us the old baggage compartment to use as a pattern for a new one. Available in two colors: off-white or olive drab canvas. MAP POCKET 10’ elastic mouth, square black vinyl pocket mounted on fiberboard. Includes hardware.........P/N 09-17415 ............... . WINDLACE INTERIOR DOOR SEAL WELT 1/2” diameter vinyl covered material that provides addi- tional sealing and ornamental edging for the door opening. The windlace is mounted between door post structure and upholstery panels or trim. Install with sheet metal screws. Black color only. P/N 09-00281 ........................... . / t. THE ULTIMATE DOOR SEAL The Ultimate Door Seal compensates for ill-fitting doors and in-flight door movement, thus keeping a positive seal to reduce the high pitched sound which causes fatigue, anxiety, and progressive hearing loss in pilots and passengers. The Deluxe Electric model features a panel mounted air control valve which is fully automatic in flight with electric power supply module. The Deluxe model features a handheld manom- eter bulb mounted permanently coiled hose and mounting bracket and panel mounted air flow control valve. The Economy model is the same system as the Deluxe but features a self-contained thumb screw air flow valve mounted on a manometer bulb with storage bracket mounted on the door. Requires no hoses or wires to be run. All systems contain everything needed for installation. All components covered under F.A.A. STC’s & PMA. AVAILABLE FOR AIRCRAFT MODELS CALL FOR A QUOTE FOR YOUR AIRCRAFT AERO-SEAL CEMENT Designed for door seals and moldings. Adheres rubber to wood, other rubber, fiberglass or metal. 4 oz. brush-top con- tainer. P/N 05-00955 ......................... . TAIL WHEEL BOOTS To keep your aircraft components clean from contamination by dust, grime and dirt, install these quality covers made from black vinyl. No mounting hardware included. Cessna 195 ..................P/N 09-17350 ................................ . Staggerwing .................P/N 09-17352 ................................ . Stearman......................P/N 09-17355 ................................ . ANTIQUE PIPER WING ROOT FRAME COVERS This cover is constructed of a lightweight stiffener panel, 1/2” foam padding and headliner fabric. A flap extends into the back side of the wing root frame and glues in place for a professional finish. P/N 09-17345....................... . FOR OTHER 3M™ PRODUCTS SEE PAGES 345-352 PIPER SHOCK BOOTS / COVERS To keep your aircraft components clean from contamina- tion by dust, grime and dirt, install these quality covers made from black vinyl. No mounting hardware included. MISCELLANEOUS BOOTS / COVERS P/N 09-17365 P/N 09-17410 •CESSNA, 310, 320 •CESSNA,170,175,180,182, 185, 206,210 •CESSNA P210, CABIN & •EMERGENCY EXIT •BEECH 33,35,36,50,55,56,95,58 •MOONEY ALL MODELS •PIPER PA23 SERIES •PIPER PA24, 30, 39, 40 •PIPER PA28, 32, 34, 44 •BELLANCA •PIPER AEROSTAR 601P,602P, 700P •CABIN DOOR •EMERGENCY EXIT •PIPER PA32, 34, •CABIN DOOR •REAR DOOR •CARGO DOORS •PA32, 34 •REAR DOOR •CARGO DOORS WHEN ADDED TO THE EXISTING SYSTEM •PIPER PA31 •CABIN DOOR •CREW DOORS •BOTH DOORS •BEECH 36, 58 •CABIN DOOR •REAR DOORS •ELECTRIC ONLY REAR DOORS ADDED TO EXISTING SYSTEM •BFA 3000 COMPRESSOR NEW •RH50 RESISTOR PAK •BEECH 58 P SERIES SEAL •CESSNA P337 A r ra t Description Qt Part No. Pr PA-22 1 Pc. Control Column Boot Each 09-17410 . PA-25 Gate Control Rod Boot Each 09-17357 . J-3 Piper Shock Boots Pair 09-17360 . PA-25 Gate Control Rod Boot Each 09-17375 . PA-25, SN25-2000 to -4171 Shock Strut Boots, pair Pair 09-17377 . A r ra t Description Qt Part No. Pr Aeronca 7AC Joy Stick Covers Pair 09-17362 . Cessna172 (also fits 182) Steering Linkage Covers Pair 09-17365 . Citabria Interior Boots Each 09-17367 . Beech Bonanza Gear Boots for Main Gear Pair 09-17370 . Beech Bonanza Dust Boot for Retractor Nose Gear PAIR 09-17372 . 131 CM WP ME HA AP LG EP CS IN EL AV TO PS BV HEADLINERS - INTERIOR MATERIALS HEADLINERS A sagging or torn headliner can make even the nicest airplane look unattractive and worn out. Headliners are actually quite inexpensive and easier to replace than many pilots realize. Our headliners are professionally manufactured and every headliner set comes with complete instructions. Available in Excell stretchable vinyl or wool. Specify fabric type and color as noted below the chart.Headliners are special order & non-returnable. AIRCRAFT PART NO. PRICE Aeronca 7AC 09-17454 . 11AC 09-17455 . 15AC 09-17456 . Chief 65CA 09-17458 . Chief LA65 09-17460 . L-3 Defender 09-17462 . Bellanca Scout w/Greenhouse 09-17464 . Super iking 1730 09-17466 . Cessna 120/140 09-17468 . 150 (59) 09-17470 . 150 (60) 09-17472 . 150 (61-63) 09-17474 . 150 (64-65) 09-17475 . 150 (66-68) 09-17476 . 150 (69) 09-17478 . 170A/170B 09-17480 . 172 (56-58) 09-17482 . 72 (59-60) 09-17484 . 72 (61-62) 09-17485 . 172 (63-70) 09-17486 . 175 09-17488 . 180 09-17490 . AIRCRAFT PART NO. PRICE Cessna 182 (56) 09-17492 . 182 (57-59) 09-17494 . 182 (60-61) 09-17495 . 182 (62, Omnivision) 09-17496 . 185 (75) 09-17498 . 206/207 09-17510 . 210 (75) 09-17512 . 310 09-17514 . Citabria w/Greenhouse 09-17515 . w/o Greenhouse 09-17516 . Commonwealth Skyranger 09-17518 . Fairchild 24 09-17520 . Maule M4 09-17522 . M5 09-17524 . Piper J-4 Coupe* 09-17525 . PA-121/J-5* 09-17526 . PA-14* 09-17528 . PA-15 agabond* 09-17530 . AIRCRAFT PART NO. PRICE Piper PA-16 Clipper* 09-17532 . PA-18 Super Cub* 09-17534 . PA-20/22 (51-52)* 6 bows, 2 zippers 09-17535 . PA-20/22 (52-58)* 8 bows, 3 zippers 09-17536 . Colt 108* 09-17538 . PA-23/250 (early 1960) 09-17540 . PA-242 (thru 1965) 09-17542 . PA28/323 09-17544 . Stinson 1084 09-17546 . 10A 09-17548 . 105-HW75 09-17550 . Taylorcraft BC12 09-17552 . 1 Specify round or square windshield Round: S/N 12-01 thru 12-2903.-2907, -2914, -2915, -2917, -2925, -2950, -3028-S, -3901 -3902, -3903 Square: S/N 12-2904 and up except those listed above. FELT All wool, 1/4” thick felt for paddings. Firm but resilient construction for many aircraft applications. Gray/brown mix. NOTE: Sold in Full 36” Width only. P/N 09-31600 ...................../Lineal Ft. HEADLINER WOOL This is a quality versatile wool headlining fabric. Wrinkles can be removed by applying water in a fine mist then using heat, such as a hair dryer, allowing wool to shrink. This gives a nice tight fit. Colors: Off- white, tan and gray. Complete P/N with color choice using (-2) for Off white, (-3) for tan, or (-4) for gray. P/N 09-17566 ....................... ./yd. 3M™ HEADLINER CEMENT Headliner, rubber & gasket adhesive. uart ................ P/N 09-17570............................. . SUPER TRIM ADHESIVE #1081 A high temp high strength contact type adhesive. Bonds metal, foam, decorative laminates, fabrics, headliners. ariable width spray pattern. Meets Fed. Spec. MMM-A-130B. 16.5 Oz. Can.............P/N 09-42652 .............. . ea. Aircraft Part No. Price Aeronca 11AC 09-35910 . Cessna 120/140 09-35915 . Piper PA20/22 09-35925 . Piper PA18 09-35930 . Piper PA28/140 09-35935 . FIREWALL SETS inyl outside, backed with 1/4” closed-cell insulation. If your aircraft is not listed, please send us your current firewall set to use as a pattern. 1-Piece Bulkhead Firewall CITABRIA Bulkhead and wrap-around pad 3 piece set. P/N 09-35950 ........................ LUSCOMBE 8A & 8E Please specify model. Also specify if 8A is with or without dishpan. If “with dishpan”, specify if round or oblong. P/N 09-35940 ........................ w/Dishpan add .............. P/N 09-35945 ........................ HEADLINER EXCELL STRETCHABLE VINYL Unique four-way stretch that easily eliminates tension wrinkles, pro- ducing a smooth professional finish. Backing and facing are mildew resistant. 54” width. Color: Off white. P/N 09-17564 ........................../yd. UPHOLSTERY HARDWARE 82° CSK Washer Size 4 ..... P/N 04-00393 ............... . Size 6 .....P/N 04-00394.............. . 82° Oval Head Screw 4x1/2 - A-OV.... P/N O4X8............. . 6x1/2 - A-OV.... P/N O6X8........... . 6x3/3 -A-OV..... P/N O6X12........... . 6x1..........P/N O6X16................. .. Snap Studs - Males snaps attached to self-tapping phillips head screws. For canopies #7 x 3/8”............... P/N 04-01520............................ .. #7 x 5/8”............... P/N 05-02131............................ .. CARGO NETTING POCKET MESH - MSG mesh products are devel- oped with customers to ensure the highest quality standard in both product design and longevity. Black 50” wide ............P/N 09-00462 .................. / yd. Tan 60” wide...............P/N 09-00461 .................. / yd. FOR OTHER 3M™ PRODUCTS SEE PAGES 345-352 HEADLINER FABRIC SWATCH SAMPLE Wool Fabrics Wool headlining fabrics are available in Off White, Tan or Grey. The fit is in the quality of the workmanship, therefore it can be made to conform to almost any curve. Mellohide VFR Mellohide VFR vinyl has a unique four-way stretch which eas- ily eliminates tension wrinkles and produces a smooth, pro- fessional finish. Backing and facing aremildrew resistant. All materials exceed FAR 23-853 P/N 09-02004 ......................... FREE Note: Complete Part No. with Fabric & Color. Excell stretchable vinyl off white -1, wool off white -2, Tan -3, Gray -4. 132 CM WP ME HA AP LG EP CS IN EL AV TO PS BV 3M™ LEADING EDGE TAPES - PROTECTIVE BOOTS 3M™ 8674 POLYURETHANE PROTECTIVE TAPES 3M™ Polyurethane Protective Tape 8674 is made from a tough abrasion resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. it is formulated for resistance to ultraviolet light. Polyurethane Protective Tape 8674 provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. It can be installed in a minimum amount of time with simple tools. It can be painted or applied over painted surfaces. Polyurethane Protective Tape 8674 is constructed with a long-aging, solvent resistant, pressure sensitive acrylic adhesivethat is protected with an easy release poly liner. This tape is a transparent film and available in 2 liner configuration: Protective Tape 8674 has a single poly liner on the adhesive side. Protective Tape 8674DL has dual liners, one on each side of the tape. The adhesive side has a poly liner, and the liner on the top of the urethane tape is polyester. 3M™ 8672 POLYURETHANE PROTECTIVE TAPES 3M™ Polyurethane Protective Tape 8672 is made from a tough abrasion resistant polyurethane elasto- mer that resists punctures, tearing, abrasion and ero- sion. It is formulated for resistance to ultraviolet light. Polyurethane Protective Tape 8672 provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. It can be installed in a minimum amount of time with simple tools. It can be painted or applied over painted surfaces. Polyurethane Protective Tapes 8672 and 8672 GB are constructed with a long-aging, solvent resistant, pressure sensitive acrylic adhesive that is protected with an easy release paper liner. Polyurethane Protective Tape 8672 is a trans- parent tape with a paper liner on the adhesive side. 3M™ POLYURETHANE PROTECTIVE BOOTS 3M™ Polyurethane Protective Boots SJ8665 are pre-formed and used extensively in private, commercial and military aircraft to fit the complex curvatures of a variety of applications. These boots are designed to help provide long lasting protection of randomes, wing and stabilizer tips, landing gear pods, composite parts, and other portions of aircraft from rain, moisture ingression, UV light, insects, sand, sleet, snow, and most other airborne particle erosion damage. The boots are part of a 3M family of high performance surface protection products available for various aerospace applications worldwide. Boot Application 3M P/N Our P/N Price Aero Commander 500-1000, Radome FP-20 09-00854 . Shrike, Radome FP-91 09-00855 . Aerostar 601 P Radome FP-127 09-00856 . Beechcraft Baron Norton Radom (Honeycomb) FP-55 09-00857 . Baron Non-Honeycomb (#58-410015-613) FP-68 09-00858 . Baron Honeycomb Nose (#58-410017-603) FP-69 09-00859 . Beech/Mitsubishi Diamond Radome FP-84 09-00860 . Duchess Radome FP-129 09-00861 . Duke Radome FP-179 09-00862 . 90,100,200,1300,1900,Most King Air, 65/ A65,70,80, A80,B80,U-8F, U-21A FP-5 09-00863 . 99 FP-35 09-00864 . 1900& King Air Series Vertical Fairing Dome FP-173 09-00865 . Bombardier Learjet 23,24,25,Radome (PN2411241-1) FP-7-1 09-00866 . Learjet 33, 36 Wing Tip FP-13-1 09-00867 . Learjet M-45 Navigational Lens Ass’y FP-195-1 09-00868 . Learjet M-45 Radome FP-174-1 09-00869 . Learjet 50, 55, 60, (PN5411212-1) FP-14-1 09-00870 . Boot Application 3M P/N Our P/N Price Cessna 208 Wing Mounted Radome FP-34 09-00871 . 208 Prop Spinner FP-87 09-00872 . 335,340,340A,401-421 Radome Long Nose FP-25 09-00873 . 310K-Q w/Norton Rad, 320, 310R (#4096) FP-90 09-00875 . 310q w/Norton Radome PN4131 FP-130 09-00876 . 310R w/Norton Radome PN4096 FP-114 09-00877 . Citation S, I, II, IV, V FP-29 09-00878 . Citation II, IV, VII FP-70 09-00879 . 210 Centurian,182,206,337 w/Wing Pod FP-126 09-00880 . 425-441 Series Radome FP-41 09-00881 . Piper Aztec (Turbo) “C” non Coleman/Apache FP-143 09-00882 . Aztec E-F Radome FP-136 09-00884 . Cheyenne I, PA31P, Mojave, PA31T1/3, etc. FP-12 09-00885 . Cheyenne II FP-4 09-00886 . Cheyenne III, IV FP-24 09-00887 . Navajo (except PA31P) FP-23 09-00888 . Seneca FP-54 09-00889 . 3M™ POLYURETHANE PROTECTION TAPE APPLICATION SOLUTION. A pre-mixed, water-based solution for applying 3M Polyurethane Protective Tape and Boots. Solution is provided pre-mixed in a ready to use squirt bottles. Allows wide width and contoured performed boots to be easily installed. P/N 06-00604................................. . 3M™ TAPE ADHESION PROMOTER 86A & CLOTH Tape Adhesion Promoter 86A is intended for use in enhancement of 3M Polyurethane Protective Tape adhesion levels to certain types of surfaces. It is most effective when used over polyurethane enamel surfaces. ..........P/N 06-00605 ................. . Adhesion Promoter Cloth (Sold Each) ..........P/N 05-03479 ................. . W L Color Description Part No. Price 1” 12yd Gloss Black 3M™ 8672 Tape 09-01636 . 1” 12yd Clear 3M™ 8672 Tape 09-01632 . 2” 12yd Gloss Black 3M™ 8672 Tape 09-01637 . 2: 12yd Clear 3M™ 8672 Tape 09-01633 . 3” 12yd Gloss Black 3M™ 8672 Tape 09-01638 . 4” 12yd Gloss Black 3M™ 8672 Tape 09-01639 . 4’ 12yd Clear 3M™ 8672 Tape 09-01635 . 6” 18yd Clear 3M™ 8672 Light A/C Kit 09-20110 . 6” 18yd Gloss Black 3M™ 8672 Tape 09-02104 . 1” 36yd Clear 3M™ 8672 Tape 09-00841 . 2” 36yd Clear 3M™ 8672 Tape 09-20140 . 3” 36yd Clear 3M™ 8672 Tape 09-00843 . 4” 36yd Clear 3M™ 8672 Tape 09-20145 . 6” 36yd Clear 3M™ 8672 Tape 09-00845 . 1” 36yd Gloss Black 3M™ 8672 Tape 09-00842 . 2” 36yd Gloss Black 3M™ 8672 Tape 09-00811 . 3” 36yd Gloss Black 3M™ 8672 Tape 09-00844 . 4” 36yd Gloss Black 3M™ 8672 Tape 09-00812 . 6” 36yd Gloss Black 3M™ 8672 Tape 09-00846 . 3M™ TAPE & RESIDUE REMOVE - Use for removal of polyurethane protective tapes, neoprene rubber and other tape residues; such as carpet tape from interior cabin composite surfaces. 16 Ounce.................................. P/N 05-02682 ................................... . Gallon....................................... P/N 05-02683....................................... FOR OTHER 3M™ PRODUCTS SEE PAGES 345-352 W L Color Description Part No. Price 1” 12yd Clear 3M™ 8674 Lead Edge Tape 09-01642 . 1” 36yd Clear 3M™ 8674 Lead Edge Tape 09-00847 . 2” 12yd Clear 3M™ 8674 Lead Edge Tape 09-01643 . 2” 36yd Clear 3M™ 8674 Lead Edge Tape 09-00813 . 3” 12yd Clear 3M™ 8674 Lead Edge Tape 09-01644 . 3” 36yd Clear 3M™ 8674 Lead Edge Tape 09-00849 . 4” 12yd Clear 3M™ 8674 Lead Edge Tape 09-01645 . 4” 36yd Clear 3M™ 8674 Lead Edge Tape 09-00814 . 6” 36yd Clear 3M™ 8674 Lead Edge Tape 09-00850 . 1” 12yd Clear 3M™ 8674DL Lead Edge Tape 09-01646 . 1” 36yd Clear 3M™ 8674DL Lead Edge Tape 09-00851 . 2” 12yd Clear 3M™ 8674DL Lead Edge Tape 09-01647 . 3” 12yd Clear 3M™ 8674DL Lead Edge Tape 09-01648 . 3” 36yd Clear 3M™ 8674DL Lead Edge Tape 09-00852 . 4” 12yd Clear 3M™ 8674DL Lead Edge Tape 09-01649 . 06-00605 05-03479 133 CM WP ME HA AP LG EP CS IN EL AV TO PS BV LEADING EDGE TAPE - WINGWALK CLEAR SLIP RESISTANT WING WALK This patented slip-resistant material is an excellent alter- native to black Wing Walk which has been used on aircraft for many years. This material is nearly clear (slightly opaque) and has an adhesive backing that requires heat or 1500 lbs. of pull to remove it from the surface on which it is applied. Imagine how much better a newly painted aircraft can look with a clear material which does not alter the paint design. The material is impervious to chemicals, compounds, and water and will expand and contract with the metal or fabric. Surface roughness of the material is about the same as standard black Wing Walk. Furnished in 16” x 30” sheets. P/N 09-31810 ............................. . Ea. NON-SKID WING WALK TAPE Our non-skid adhesive tape is excellent for wing walk applications. The white and clear is perfect for pilots wishing their step areas to blend in, not stand out. This tape meets all applicable Mil Specs and has superior adhesion qualities. Sold by lineal foot. DISCOUNT: LESS 15% ON 50 FT (Per P/N) LEADING EDGE TAPE Clear plastic tape with adhesive backing for application to wing and tail leading edges for protection against nicks caused by stones and gravel. 100 Ft. Rolls. 3M™ POLYURETHANE LEADING EDGE TAPE Designed to help protect light aircraft from the damaging effects of rain, insects, sand, snow and sleet. A tough durable, protective tape for exposed surfaces. 3M #8672 Polyurethane Protective Tape is designed to help protect the leading edges of aircraft wings, struts, and horizontal and vertical stabilizers from airborne particle damage. Versions of this tape are used extensively for surface prot