Beechcraft Duke 60 Maintenance Manual

Beechcraft 60 Duke · Maintenance Manual

Free account — keep the POHs & checklists you reference in one place.

Overview

The Beechcraft Duke 60 Maintenance Manual provides comprehensive maintenance guidelines for the Beechcraft Duke 60 series aircraft. It includes detailed information on various systems, maintenance practices, and effective revisions to ensure proper upkeep and safety of the aircraft.

Covers maintenance for Beechcraft Duke 60 models P-4 thru P-126, A60 models, and B60 models.
Published by Beech Aircraft Corporation in November 1973.
Follows ATA (Air Transport Association) Sub-System/Section Specification No. 100 format.
Includes a log of effective revisions for tracking updates.
Organized into chapters covering different aircraft systems.
Emphasizes the use of genuine Beechcraft parts for safety.
Contains an alphabetical index for easy navigation.
Warnings against using non-approved parts due to safety concerns.

Document

Source

Originally published by weebly.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

View original at weebly.com

Report a problem or request removal

Document details

Type: Maintenance Manual
Year: 1973
File size: 5.3 MB
Publisher: weebly.com
Language: en

About this document

What is the Beechcraft Duke 60 Maintenance Manual?

The Beechcraft Duke 60 Maintenance Manual is a maintenance manual for the Beechcraft 60 Duke, dated 1973.

Where does the Beechcraft Duke 60 Maintenance Manual come from?

This copy of the Beechcraft Duke 60 Maintenance Manual was originally published by weebly.com and is hosted on Sprinkle as a free, searchable reference copy.

What year was the Beechcraft Duke 60 Maintenance Manual published?

The Beechcraft Duke 60 Maintenance Manual — the Beechcraft 60 Duke maintenance manual on file — is dated 1973.

Documentation completeness

4/7

Most owners only have the POH. Here's the essential set for the Beechcraft 60 Duke.

More Beechcraft 60 Dukemanuals & documents

See all 24 →

In this document

Introduction

The introduction outlines the structure of the manual and the importance of using genuine Beechcraft parts.

List of Effective Revisions

Details the revisions made to the manual, ensuring users have the most current information.

ATA-100 System/Chapter Index Guide

Provides a guide to the chapters and sections covered in the maintenance manual.

Maintenance Practices

Describes standard maintenance practices necessary for the upkeep of the aircraft.

Warnings and Notices

Includes important warnings regarding the use of non-genuine parts and the responsibility of the owner/operator.

Effective Pages

Lists the effective pages and their corresponding dates to ensure users are referencing the correct information.

Safety notes

Use only genuine Beechcraft or Beechcraft approved parts for maintenance.
Non-approved parts may not have undergone necessary tests and inspections.
Salvaged or reworked parts from non-approved sources may be unsafe.
Always destroy superseded pages when new revisions are issued.
Ensure the latest revision of publications is utilized during maintenance.

Full document text

Oeechcraft. DUKE MODEL 60 (P-4 thru P-126 except P-123) MODEL A60 (P-123, P-127 thru P-246) MODEL B60 (P-247 and after) MAINTENANCE MANUAL PIN 60-590001-25 issued: November 2, 1973 PIN 60-590001-25A18 Supersedes: 60-590001-58 Revised: November 20, 1987 PUBLISHED BY COMMERCIAL PUBLICATIONS BEECH AIRCRAFT CORPORATION WICHITA, KANSAS 67201 U. S. A. Rechcraft Me N General Aviation AliagilleenCompany menuiscourersAasociaison Title Page.................................................November 20, 1987 "A" Page................................................................A18 "B" Page................................................................A18 LOGOF REVISIONS PART NUMBER DATE CHAPTERAFFECTED 60-590001-25 November 2, 1973 - Original 60-590001-25A1 August 16, 1974 61, 71 60-590001-25A2 May 30, 1975 Intro, 5, 12, 21, 25, 27, 30, 32, 36, 56, 61, 71, 91, Insp. 60-590001-25A3 October 27, 1975 Intro, 7, 12, 22, 28, 30, 32, 53, 57, 91 60-590001-25A4 October 19, 1977 12, 24, 25, 28, 30, 32, 33, 61, 73, 79 60-590001-25A5 May 12, 1978 Intro, 5, 11, 12, 20, 23, 24, 30 60-590001-25A6 September 14, 1979 Intro, 5, 27 60-590001-25A7 February 22, 1980 Intro, 5, 12, 21, 57, 91 60-590001-25A8 April 18, 1980 Intro, 11, 12, 20, 25, 33, 52 60-590001-9A9 August 15, 1980 Intro, 25, 38 60-590001-25A10 November 28, 1980 5 60-590001-25A11 February 27, 1981 55, 57 60-590001-25A12 April 2, 1981 5, 57, 91 60-590001-25A13 June 21, 1982 5, 30 NOTE: A list of the effective pages will be found in the front of each chapter. Basic publications are assigned a part number which appears on the title page with the date of the issue. Subsequent revisions are identified by the addition of a revision code atter the part number. A1 after a part number denotes the first revision to the basic publication. A2 the second. etc. Occasionally. it is necessary to completely reissue and reprint a publication for the purpose o1 obsoleting a previous issue and outstanding revisions thereto. As these replacement reissues are made. the code will âlso change to the next successive letter of the alphabet at each issue For example. B tor the first reissue. C tor the second reissue. etc. When ordering a handbook. give the basic number. and the reissue code when applicable, il a complete up-to-date publication is desired Should only revision pages be requifed. give the basic number and revision code for the particular set of revision pages you desire. A Always destroy superseded pages when you sert revised pages 60-590001-25A14 November 30, 1983 Intro. 5, 12, 20, 57, 91 0-590001-25A15 June 13, 1984 23, 32, 57 60-590Ü01-25416 September 20, 1985 Intro, 27 öf-59000 25A17 January 9, 1986 12 60-59600 25A18 November 20, 1987 5, 25, 32 1 B BEECHCRAFT DUKE60 SERIES MAINTENANŒ MANUAL INTRODUCTION LIST OF PAGE EFFECTIVITY CHAPTER SECTION SUBJECT PAGE DATE INTRODUCTION-EFFECTIVITY 1 Sep 20/85 INTRODUCTION 1 Nov 30/83 2 Sep 20/85 3 Nov 30/83 4 Nov30/83 5 Nov 30/83 6 Nov30/83 7 Nov 30/83 8 Nov30/83 9 Nov 30/83 10 Nov 30/83 10A Nov 30/83 11 Aug 15/80 12 Aug 15/80 13 Aug 15/80 14 Aug 15/80 15 Aug 15/80 16 Aug 15/80 17 Aug 15/80 18 Aug 15/80 19 Aug 15/80 20 Aug 15/80 "END" INTRODUCTION-EFFECTIVITY Page 1 A16 Sep 20/85 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL INTRODUCT10N the chapter "Fuel". Everything conceming the fuel system will be covered in this chapter. This BEECHCRAFT Duke 60 Maintenance Manual is pre- pared in accordance with theATA (Air Transport Association) Sub-System/Section - The major systems of an aircraft Specification No. 100 format. Additional airframe manuals, are broken down into sub-systems. These sub-systems which supplement this maintenance manual are the are identified by the second element of a standard num- BEECHCRAFT Duke 60 Wiring Diagram Manual, P/N 60- bering system. The number "40" of the number 28-40-00 590001-29 and the BEECHCRAFT Duke 60 Beech Manufac- is for the indicating portion of the fuel system. tured Component Maintenance Manual, PIN 60-590001-27. Unit/Subject - The individual units within a sub-system may be identified by the third element of the standard NOTICE numbering system, such as 28-40-01. This number is assigned by the manufacturer and may, or may not, be Beech Aircraft Corporation expressly reserve the used and will vary in usage. right to supersede, cancel and/or declare obso- lete any part, part numbers, kits or publication that may be referenced in this manual without APPLICATION prior notice. Any publication conforming to the ATA format will use the same basic numbering system. Thus, whether the manual be NOTE a BEECHCRAFT Duke 60 Maintenance Manual, or Wiring Diagram Manual for a Beech Duke 60, the person Service publication reissues or revisions are not wishing information conceming the indicating portion of the automatically provided to the holders of this fuel system would refer to the Tab System/Chapter 28, Fuel. manual. For information on how to obtain a revi- The table of contents in the front of the chapter willprovide a sion service applicable to this manual, refer to list of sub-systems covered in the chapter. BEECHCRAFT Service Instructions No. 0250- 010, Rev. I or subsequent revisions. For example: CORRESPONDENCE 28-00 General If a question should arise conceming the care of your air- 28-10 Storage plane, it is important to include the airplane serial number in (Tanks, cells, necks, any correspondence. The serial number appears on the caps, instruments, etc.) model designation placard (refer to Chapter 11 for placard 28-20 Distribution location). (Fuel lines, pumps, valves, controls, etc.) ASSIGNMENT OF SUB./ECT MATERIAL 28-30 Dump (If in-flight dumping system is The content of this publication is organized at four levels: installed, it would appear here.) Group, System/Chapter, Sub-System/Section, and Unit/Sub. 28-40 Indicating ject. (Quantity,temperature, pressure, etc., does not include engine Group - Identified by different colored divider tabs. These fuel flow or pressure.)

Show full text

are~ priinary divisions of the manual that enable broad separation of content. Typical of this division is the sep- aration between Airframe Systems and the Power Plant- Carrying this example further, Fuel Indication, Left Indicator Panel, could be assigned the number 28-41-01. System/Chapter - Re various groups are broken down into major systems such as Air Conditioning, Electrical The table of contents in front of each chapter willlist the items Power, Landing Gear, etc. The systems are arranged covered and the numbers assigned. more or less alphabetically rather than by precedence or importance. Rey are assigned a number,which becomes All publications will use the standard numbering system, the first element of a standardized numbering system- even though all chapters may not be applicabletothe aircraft Thus, the element "28" of the number 28-00-00 refers to or to the publication. INTRODUCTION Page 1 A14 Nov 30/83 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL ATA 100.PAGE BLOCK GU/DE current issue of the Publications Price List for a enumeration of the maintenance information available Following is a guide to the assignment of the blocks of Aerofiche form for order from Beech Aircraft Corporation pages within each System/Chapter. Sub-System/Section, Unit/Subject number in the maintenance manual. ATA 100 INDEX GUIDE Description and Operation Pages 1 to 100 The following is an ATA-100 System/Chapter, Sub Troubleshooting Pages 101 to 200 System/Section Index Guide for use with Maintenano Maintenance Practices Pages 201 to 300 Manuals, Parts Catalogs, Wiring Diagram Manuals ani Lomponent Maintenance Manuals as required. The text providing the coverage of the description and operation ofa system or component would appear on pages WARNING numbered consecutively 1 through 100, if needed. The information pertaining to the troubleshooting of this same Useon i y genu ine 8 EECHCR A FT or system or component would appear on pages numbered SEECHCRAFT approved parts obtained from consecutivelyi01through200,itneeded.Themaintenance BEECHCRAFT approved sources, in practices information would appear on pages numbered 201 connection with the maintenance and repair of through 300. The word "END" at the bottom of a page Beech airplanes. would.indicate the last page in that block. Genuine BEECHCRAFT parts are produced and inspected under rigorous procedures to L/ST OF EFFECTIVE REVIS/ONS insure airworthiness and suitability for use in . Beech airplane applications. Parts purchased The Log of Effective Revisions following the title page of the from sources other than SEECHCRAFT, even manual lists the revisions currently effective for the manual. though outwardly identical in appearance, may not have had the required tests and inspections performed, may be different in fabrication LIST OF EFFECTIVE PAGES techniques and materials, and may be dangerous when installed in an airplane. The List of Effective Pages and the Table of Contents in the front of each chapter will each start with page 1 and be Salvaged airplane parts, reworked parts numbered consecutively, thereafter, as necessary. obtained from non-BEECHCRAFT approved sources, or parts, components, or structural ALPHABETICAL INDEX assemblies, the service history of which is unknown or cannot be authenticated, may have An alphabetical index, as part of the introduction, is been subjected to unacceptable stresses or provided as an assistance in locating the desired temperatures or have other hidden damage, not information. The alphabetical index provides the chapter discemible through routine visual or usual and sub-chapter in which any given information may be nondestructive testing techniques. This may found. Reference to the Table of Contents in the front of the render the part, component or structural indicated chapter will provide the exact page on which the assembly, even though originallymanufactured information can be found. by BEECHCRAFT, unsuitable and unsafe for airplane use. MICROFICHE - AEROFICHE BEECHCRAFT expressly disclaims any The General Aircraft Manufacturers Association has responsibility for malfunctions, iailures, damage developed a spec6cation for microfiche and registered the or injury caused by use of non-BEECHCRAFT name Aerofiche for use by all GAMA Members. Consult the approved parts l NOTE ftshall be the responsibility ofthe ownerloperator to ensure that the latest revision of publications referenced in this handbook are utilized during - operation, servicing, and maintenance of the air- plane. INTRODUCT10N Page 2 Sep 20/85 A1( BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL ATA-100 SYSTEM/CHAPTER INDEX GUIDE The following chapters are not covered within this Maintenance Manual: 26, 29, 31, 37, 39, 49, 54, 60, 70, 75, 76, 78, and 83 SYSTEM/ SUB-SYSTEM/ CHAPTER SECTION TITLE INTRODUCTION AIRCRAFT GENERAL 5 TIME LIMITS/MAINTENANCE CHECKS 10 Time Limits 20 Scheduled Maintenance Checks 6 DIMENSIONS AND AREAS 7 LIFTING AND SHORING 00 General 8 LEVELINGAND WEIGHING 00 General 9 TOWING AND TAXIING 00 General 10 PARKING AND MOORING 00 General 11 PLACARDS AND MARKINGS 00 General 12 SERVICING 00 General 10 Replenishing 20 Scheduled Servicing AIRFRAMESYSTEMS 20 STANDARD PRACTICES-AIRFRAME 00 Standard Practices-Airframe INTRODUCTION Page 3 A14 Nov 30/83 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL SYSTEM/ SUB-SYSTEMI CHAPTER SECTION TITLE 21 AIR CONDITIONING 00 General 10 Compression 20 Distribution 30 Pressurization Control 40 Heating 50 Cooling 22 AUTOFLIGHT 00 General 10 Autopilot (H14) 11 Autopilot (New-Matic) 23 COMMUNICATIONS 60 Static Discharging 24 ELECTRIC POWER 00 General 30 DC Generation 31 DC Generation (Battery) 32 DC Generation (Charge Current Detector) 40 External Power 50 Electrical Load Distribution 25 EQUIPMENT/FURNISHINGS 00 General 60 Emergency 26 FIRE PROTECTION 27 FLIGHT CONTROLS 00 General 10 Aileron and Tab 20 Rudder and Tab 30 Elevator and Tab 50 Flaps 60 Spoiler, Drag Devices and Variable Aerodynamic Fairings 70 Gust Lock and Dampener 28 FUEL 00 General 10 Storage 20 Distribution 40 Indicating INTRODUCTION Page 4 Nov 30/83 A14 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL SYSTEM/ SUB-SYSTEMI CHAPTER SECTION TITLE 30 ICE AND RAIN PROTECTION 00 General 10 Airfoit 20 Air Intakes 30 Pitot and Static 40 Windows and Windshields 60 Propellers/Rotors 32 LANDING GEAR 00 General 10 Main Gear and Doors 20 Nose Gear and Doors 30 Extension and Retraction 40 Wheels and Brakes 50 Steering 60 Position and Warning 33 LIGHTS 00 General 40 Exterior 34 NAVIGATION 10 Flight Environment Data 35 OXYGEN 00 General 36 PNEUMATIC 00 General AIRFRAME SYSTEMS 38 WATER/WASTE 30 Waste Disposal STRUCTURES 51 STRUCTURES 00 General INTRODUCTION Page 5 A14 Nov 30/83 BEECHCRAFT DUKE60 SEAIES MAINTENANCE MANUAL SYSTEMI SUB-SYSTEM/ CHAPTER SECTION TITLE 52 DOORS 00 General 10 Passenger/Crew 60 Entrance Stairs 70 Door Warning 53 FUSELAGE 30 Plates/Skin 55 STABILIZERS 00 General 10 Horizontal Stabilizers 20 Elevator 30 Vertical Stabilizer 40 Rudder 56 WINDOWS 00 General 10 Flight Compartment 20 Cabin 57 WINGS 00 General 30 Plates/Skin 40 Attach Fittings 50 Flight Surfaces PROPELLERS 61 PROPELLERS 00 General POWER PLANT 71 POWER PLANT 00 General 10 Cowling 72 ENGINE RECIPROCATING 73 ENGINE FUEL AND CONTROL 30 indicating INTRODUCTION Page 6 Nov 30/83 A14 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL SYSTEM/ SUS-SYSTEM/ CHAPTER SECTION TITLE 74 IGNITION 00 General 10 Electrical Power Supply 20 Distribution 77 ENGINE INDICATING 00 General 79 OIL 00 General 80 STARTING 00 General 10 Cranking 81 TURBINES 00 General 91 CHARTS 00 Charts INTRODUCTIOI Page A14 Nov 30/8 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL SUPPLEMENTARY PUBLICATIONS The following is a list of publications providing servicing, overhaul and parts information on various components on the BEECHCRAFT Duke 60 Series airplanes which you may obtain to supplement the BEECHCRAFT Duke 60 Series Maintenance Manual. In most instances you should obtain the publications directly from the manufacturer or his distributor. Only a few, such as Beech supplementary publications, are available from Parts and Service Operations, Beech Aircraft Corporation. Those which are so available are listed in the current Publications Priœ List. Since a wide variety of radio components and equipment is available and because radio manufacturers normallysupply parts and servicing manuals with each set, radio publications have not been included in the list. As publications on additional components become available, they will be added to the list of publications. BEECH PUBLICATIONS 98-33857 installation, Maintenance and illustrated Parts Breakdown for 60-389017 Voltage Regulator. 98-36235 Installation, Maintenance and Illustrated Parts Breakdown for 60-389017-1 Voltage Regulator. 98-33702 Overhaul and Parts Breakdown for 50-921560 Engine Driven Fuel Pump. 98-37031 Inspection Procedures and Maintenanœ Guide for the'OECO 20139 and 20051 Inverter. 98-35655 Brittain B-5 and B-7 Autopilot Operating Manual. 98-35850 Brittain B-5 and B-7 Autopilot Maintenance Manual and illustrated Parts Breakdown. 98-34350 Operation Manual for 3-Button Flight Controller. 98-35636 Operation Manual for 4-Button Flight Controller (With fleading Selector). 98-32751 Maintenance Instructions for Goodyear Wheel, Brake and Tire Assembly. 98-34998 Maintenance Instructions for Goodrich Wheel, Brake and Tire Assembly. 98-36374 Overhaul and Cleaning Procedure for Pressurization Controllers, Outflow and Safety Valves H-14 AUTOP/LOT 130333C Maintenance Manual. 98-30603 Maintenance Manual Supplement. 92-301038 Overhaul Instructions for BG274B2, C1, C2 Computer. 92-30105 Overhaul Instructions for CG136A1 Heading Selector. 92-301068 Okrh Instructions for MG113A1, MG113A2, MG113A3, MG114A4 Actuator and SG28A1, SG28A3 Pressure Switch. 92-30107A1 Overhaul Instructions for PG51A1 Altitude Control. 92-30229 Overhaul Instructions for GG205A3, GG205A4, (GG205B4) Turn and Bank Indicator Gyro. 92-304118 Overhaul Instructions for GG201A1, GG20181 Vertical Gyro. 92-304128 Overhaul Instructions for GG2021, GG202B1 Directional Gyro. INTRODUCTION Page 8 Nov 30/83 A14 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL H-14 AUTOP/LOT (Cont'd.) 98-32523 Overhaul Instructions for MG112A1, MG112B1 Trim Actuator. 98-32839 Overhaul Instructions for CG41781, CG41782 Flight Controller. VENDOR PUBLICATIONS ENGINE Parts Catalog PC-120, Avco Lycoming Division, Williamsport, Pennsylvania. Overhaul Manual 60294-6, Avco Lycoming Division,Williamsport, Pennsylvania. Operator's Manual 60297-13, Avco Lycoming Division,Williamsport, Pennsylvania. FUEL INJECTION Operation and Service Manual, Form 15-468, Bendix Corporation, South Bend, Indiana. PROPELLER Overhaul Instructions 117B for Hartzell Propeller, Hartzell Propeller Inc., Piqua, Ohio. Owners Manual 115E for Hartzell HCF3YR2/C7479-2R and Hartzell HCF3YR2F/FC7479B2R Propellers, Hartzell Propeller Inc., Piqua, Ohio. Spinner Assembly Maintenance Instruction Guide, Issued: June 1974, Hartzell Propeller Inc., Piqua, Ohio Maintenance Handbook for Constant Speed Hydraulic Propeller Governor Type CSSA, Number 33002, Woodward Governor Company, Rockford, Illinois. MAGNETOS Overhaul Instructions for Bendix S-1200 Series Magnetos, Form L-609, Scintilla Division,Bendix Aviation Corporation, Sidney, New York. Service Parts List for Bendix S-1200 Series Magnetos, Form L-608, Scintilla Division, Bendix Aviation Corporation, Sidney, New York. STARTINGMOTOR Overhaul Instructions, Form OE-A1, Prestolite Company, Toledo, Ohio. DE/CER DISTRIBUTOR VALVE Overhaul instructions with Parts Breakdown, Publication Number 38U-2-142, Fluid Power Division, Bendix Aviation Corp. Utica" NefYorki Operation and Service Instructions, Publication Number 39U-1-810E Fluid Power Division, Bendix Aviation Corp. Utica, New York. ELECTRONICSYNCHRON/ZER Installation Manual, Bulletin Number 33032A, Woodward Governor Company, Rockford, Illinois. Propeller Synchronizer for Light Twin Engine Aircraft, Bulletin Number 33049C, Woodward Governor Company, Rockford, Illinois. INTRODUCTION Page 9 A14 Nov 30/83 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL HYDRAULIC ACCUMULATOR Maintenance Manual Number 33058, Woodward Govemor Company, Rockford, Illinois. GENERATOR Overhaul and Parts Breakdown, Fife 30204, Lear Siegler Inc., Cleveland, Ohio. BAT7ERY Operator and Service Manual for Vented-Cell Nickel-Cadmium Battery, GET3593A, General Electric Company, Gainesville, Florida. Maintenance Manual for Nickel-Cadmium Battery, ABD1100, Gulton Industries, Inc., Metuchen, New Jersey. Marathon Battery Installation Manua, BA89, Marathon Battery Co., Cold Springs, N.Y. ELECTRIC PROPELLER DEICER Installation of Deicer Boots, Report 59-728, B.F. Goodrich Company, Akron, Ohio. Installation, inspection and Testing of Propeller Deicer System, Report 68-04-708, B,F. Goodrich Company, Akron, Ohio. HEATER VENT BLOWER Overhaul instructions for Vane Axial Blower Number M6921N6A, with Motor M3416DA, Dynamic Air Engineering Inc., Santa Ana, California. HEATER Maintenance Instructions for Janitrol A34D51Aircraft Heater, Publication Number 57083, Janitrol Aero Division, Midland-Ross Corporation, Columbus, Ohio. Maintenance Instructions for Janitrol 52D70 Aircraft Heater ignition Unit, Publication Number 58D42, Janitrol Aero Division, Midland-Aoss Corporation, Columbus, Ohio. AIR CONDITIONER COMPRESSOR Series 67 Compressor Service Manual, Form 180.33NM, York Corporation, York, Pennsylvania, Renewal Parts List, Form 180.33RP, York Corporation, York, Pennsylvania. OU7FLOW AND SAEETY VALVE Operation and Maintenance instructions, Report No. 4-268, 15 April 1975, Garrett Airesearch Manufacturing Division, Los Angeles, CA. EUEL CELLS Recommended Handling and Storage Procedures for Bladder Type Fuel and Oil Cells, Publication Number FC1473-73, Uniroyal inc., Mishawaka, Indiana 46544. Repair Procedures for Heated Repairs to Bladder and Self-sealing Fuel Cells, Repair Procedure RK-72, February 3, 1977, Uniroyal, Inc., Mishawaka, Indiana 46544. INTRODUCTION Page 10 Nov 30/83 A14 BEECHCRAFT DUKE60 SERIES MAINTENANCE MANUAL NEWMATIC AUTOP/LOT B-8 Ground and Flight Check Procedures Manual Number 3957, Brittain Industries, Torrance, Califomia. LANDING GEAR MOTOR Component Maintenance Manual with Illustrated Parts List for Landing Gear Motor P/N 27-4 and 27-8, Electro-Mech, Inc., Wichita, Ks. BRAKES Overhaul Information for A22 Brake Shuttle Valve, Publication Number 74456, Hoof Products, Co., Chicago, Illinois. Overhaul Information for Brake Shuttle Valve, A-SA404, Publication Number 23595, Paramount Machine Co., Stow, Ohio. EMERGENCY LOG4TOR TRANSMITTER Operating Instructions for Model CIR-10( ) Emergency Locator Transmitter System, Transmitter P/N TR 70-17, Collins/Communications Components Corporation, Costa Mesa, Califomia. Operating Instructions for Model C1R-11( ) Emergency Locator Transmitter System, Transmitter P/N TR 70-13; Collins/Communication Components Corporation, Costa Mesa, Califomia. Owners Manual, Installation and Pilot's Guide P/N 03716-0602 for the Narco ELT 10 Emergency Locator Transmitter, Narco Avionics, Division of Narco Scientific Industries, Fort Washington, Pennsylvania. INTRODUCTION Page 10A A14 Nov 30/83 BEECNCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CHAPTER A AC GENERATION ELECTRICAL POWER 24-00-00 AILERON BALANCING WINGS 57-50-00 AILERON CONTROL CABLE INSTALLATION FLIGHT CONTROLS 27-10-00 AILERON CONTROL CABLE REMOVAL FLIGHT CONTROLS 27-10-00 AILERON CONTROL SYSTEM RIGGING FLIGHT CONTROLS 27-10-00 AILERON INSTALLATION FLIGHT CONTROLS 27-10-00 AILERON MAINTENANCE WINGS 57-50-00 AILERON REMOVAL FLIGHT CONTROLS 27-10-00 AILERON SERVO PRESSURE REGULATOR PNEUMATIC 36-00-00 AILERON TRIM TAB ACTUATOR INSTALLATION FLIGHT CONTROLS 27-10-00 AILERON TRIM TAB ACTUATOR REMOVAL FLIGWT CONTROLS 27-10-00 AILERON TRIM TAB CABLE INSTALLATION FLIGHT CONTROLS 27-10-00 AILERON TRIM TAB CABLE REMOVAL FLIGHT CONTROLS 27-10-00 AILERON TRIM TAB RIGGING FLIGHT CONTROLS 27-10-00 AILERON TRIM TAB-CHECKING FREE PLAY FLIGHT CDNTROLS 27-10-00 AIR CONOITIONER-CHARGING SERVICING 12-10-00 AIR CONOITIONING FUNCTIONAL TEST AIR CONDITIONING 21-50-00 AIR CONOITIONING SYSTEM AIR CONDITIONING 21-00-00 AIR CONDITIONING SYSTEM SERVICING 12-10-00 AIR CONDITIONING SYSTEM CHARGING AIR CONDITIONING 21-50-00 AIR SCOOP RIGGING AIR CONDITIONING AIR GONDITIONING 21-50-00 AIRPLANE FINISH CARE STANDARD PRACTICES-AIRFRAME20-00-00 AIRPLANE FINISH CLEANING & WAKING SERVICING 12-2D-00 ALCAL GALIBRATION UNIT ENGINE INDICATING 77-00-00 ALTITUDE CONTROLLER INSTALLATION,CABIN AIR CONDITIONING 21-30-00 ALTITUOE CONTROLLER REMOVALeCABIN AIR CONDITIONING 21-30-00 ASSIST STEP AOJUSTMENT-FDLDED DOORS 52-60-00 ASSIST STEP BELL CRANK INSTALLATION DOORS 52-60-00 ASSIST STEP BELL CRANK REMOVAL DOORS 52-60-00 ASSIST STEP CA6LE INST (P-4 THRU P-509) DOORS 52-60-00 ASSIST STEP CABLE INST (P-510 & AFTER) DOORS 52-60-00 ASSIST STEP CA6LE REM (P-4 THRU P-509) DOORS 52-60-00 ASSIST STEP CABLE REM (P-510 & AFTER) DOORS 52-60-00 ASSIST STEP INSTALLATION DOORS 52-60-00 ASSIST STEP REMOVAL DOORS 52-60-00 ASSIST STEP STRUT ASSY INSTALLATION DOORS 52-60-00 ASSIST STEP STRUT ASSY REMOVAL DOORS 52-60-00 AUTOPILOT PNEUMATIC SYSTEM AUTO FLIGHT 22-10-00 AUTOPILOT REGULATOR-N-14 09EUMATIC 36-00-00 AUTOPILOT-H-14 AUTO FLIGHT 22-10-00 AUTOPILOT-NEW-MATIC AUTO FLIGHT 22-11-00 B SATT REPL, COLLINS/COMM COMP CORP ELT EQUIPMENT/FURNISHINGS 25-60-00 BATTERY ELECTRICAL POWER 24-00-00 BATTERY SERVICING 12-20-00 BATTERY CAPACITY CHECK ELECTRICAL POWER 24-31-00 BATTERY GAPACITY RECONDITIONING ELECTRICAL POWER 24-31-00 BATTERY CNARGE CURRENT DETECTOR SYSTEM ELECTRICAL POWER 24-00-00 BATTERY CHARGE CURRENT DETECTOR SYSTEM ELECTRICAL POWER 24-32-00 BATTERY CHARGING ELECTRICAL POWER 24-31-00 BATTERY CLEANING AND INSPECTION ELECTRICAL POWER 24-31-00 BAT.TERY CONSTANT CURRENT CHARGING ELECTRICAL POWER 24-31-00 BATTERY CONSTANT POTENTIAL CHARGING ELECTRICAL POWER 24-31-00 BATTERY ELECTRICAL LEAKAGE CHECK ELECTRIGAL POWER 24-31-00 BATTERY ELECTROLYTE LEVEL ADJUSTMENT ELECTRIGAL POWER 24-31-00 BATTERY EMERGENGY LOCATOR EQUIPMENT AND FURNISHINGS 25-60-00 BATTERY INSTALLATION ELECTRICAL POWER 24-31-00 BATTERY MAINTENANCE LOG ELECTRICAL POWER 24-31-00 SATTERY MAINTEMANCE PROGRAM ELECTRICAL POWER 24-31-00 BATTERY PRE-INSTALLATION INSTRUCTION ELECTRICAL POWER 24-31-00 BATTERY RECONOITIONING FREQUENCY ELECTRICAL POWER 24-31-00 SATTERY RECONOITIONING PROCEDURE ELECTRICAL POWER 24-31-00 BATTERY REMOVAL ELECTRICAL POWER 24-31-00 BATTERY REPL, NARCO ELT EQUIPMENT/FURNISHINGS 25-60-00 BATTERY STAND-BY CHARGING ELECTRICAL POWER 24-31-00 INTROOUCTION PAGE 11 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENTITEM CHAPTER CHAPTER S OR SYSTEM NAME NAME SUS CHAPTER B BRAKE ASSEMBLY LANDING GEAR 32-40-00 BRAKE ASSEMBLY INSTALLATION LASOING GEAR 32-40-00 BRAKE ASSEMBLY REMOVAL LANDING GEAR 32-40-00 BRAKE GRAVIT¥ BLEEDING LAMOING GEAR 32-40-40 BRAKE NYORAULIC SYSTEM LANGING GEAR 32-40-00 BRAKE MASTER CYLINDER INSTALLATION LANOING GEAR 32-40-00 BRAKE MASTER CYLINDER LINKAGE ADJUST LANGING GEAR 32-40-00 BRAKE MASTER C¥LINDER REMOVAL LANOING GEAR 32-40-00 BRAKE PRESSURE BLEEDING LANDING GEAR 32-40-00 BRAKE S¥STEM SERVICING 12-10-00 BRAKE SYSTEM BLEE0ING LANDING GEAR 32-40-00 BRAKE SYSTEM BLEE0ING-0UAL LAMOING GEAR 32-40-00 BRAKE MEAR LIMITS-GOODRICN LANDING GEAR 32-40-00 BRAKE WEAR LIMITS-GOOOYEAR LAMUING GEAR 32-40-00 C CABIN ALTITUDE CONTROLLER AOJUSTMENT AIR CONDITIONING 21-30-00 CABIN ALTITUOE CONTROLLER FILTER AIR CONOITIONING 21-30-00 CABIN ALTITUDE CONTROLLER INSTALLATION AIR"CONDITIONING 21-30-00 CABIN ALTITUOE CONTROLLER INSTALLATION AIR.CONOITIONING 21-30-40 CABIN ALTITUDE CONTROLLER REMOVAL AIRECOMDITIONING 21-30-00 CABIN ALTITUOE CONTROLLER-MANUAL AIRCCONDITIONING 21-30-00 CASIN ALTITUOE CONTROLLER-MOTORIZED AIACCONDITIONING 21-30-00 CABIN 000R 00045 52-10-00 CASIN DOOR INSTALLATION DOGES 52-10-00 CABIN 000R LATCH A0JUSTMENT DOORS 52-10-00 CABIN DOOR LATCH MECHANISM LUBE DOGRS 52-10-00 CABIN DOOR LATCN MECHANISM RIGGING DOGES 52-10-00 CABIN DOOR LIGNT SWITCHES DOGRS 52-70-00 CASIN 000R REMOVAL DOORS 52-10-00 CABIN TEMP SENSORS/CONT RHEO TEST AIR CONDITIONING 21-40-00 CABLE TENSION-EFFECT OF TEMP UPON FLIGHT CONTROLS 27-00-00 CARRY THROUGH STRUCTURE WINGS 57-00-00 CHEMICAL TOILET CLEANING WATER/WASTE 38-30-00 COMBUSTION AIR BLOWER INSTALLATION AIR=COMDITIONING 21-40-00 CONSUSTION AIR BLOWER REMOVAL AIRiCOMDITIONING 21-40-00 COMPRESSION AIACCONDITIONING 21-10-00 COMPRESSOR BELT INSTALLATIDN AERCCONDITIONING 21-50-40 COMPRESSOR BELT REMOVAL AIR CONDITIONING 21-50-00 COMPRESSOR BELT TENSION AOJUSTMENT ATRTCONDITIONING 21-50-00 COMPRESSOR BELT TENSION AOJUSIMENT SERVICING 12-10-00 COMPRESSOR INSTALLATION AER CONDITIONING 21-50-00 COMPRESSOR DIL LEVEL CHECKING SERVICING 12-10-00 COMPRESSOR DIL LEVEL CHECKING AER CONDITIONING 21-50-00 COMPRESSOR REMOVAL AIR CONOITIONING 21-50-00 CONDENSER BLOWER INSTALLATION AER CONOITIONING 21-50-00 CONDENSER BLOWER REMOVAL ATR CONDITIONING 21-50-00 CONSUMABLE MATERIALS CHARTS 91-00-00 CONSUMABLE MATERIALS CHART SERVICING 12-20-00 CONTROL COLUMN FCOGNT CONTROLS 27-00-00 CONTROL COLUMN $US CABLE INSTALLATION FUEGHŒ CONTROLS 27-00-00 CONTROL COLUNN BUS CABLE RENOVAL ELEGHT CONTROLS 27-00-00 CONTROL COLUMN BUS CABLE RIGGING ERIGHT CONTROLS 27-00-00 CONTROLLER INSfALLATIONaCABIN ALTITUOE ABR COMDirIONING 21-30-00 CONTR LLEWREMOVALeCABIN ALTITUDE AER CONDITIONING 21-30-00 COOLING ARR CONDITIONING 21-50-00 COWL FLAP ACTUATOR RIGGING EBRER PLANT 71-10-00 COWL FLAP AND ACTUATOR INSTALLATION ROWER PLANT 71-10-00 COWL FLAP AND ACTUATOR REMOVAL EGWER PLANT 71-10-00 COWLING INSTALLATION ROWER PLANT 71-10-00 COWLING REMOVAL POWER PLANT 71-10-00 D DC GENERATION ELECTRICAL POWER 24-00-00 OEFUELING-AIRCRAFT EUEL 28-00-00 INTRODUCTIDN PAGE 12 AUG 15/80 BEECHCRAFT OUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPDNENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CHAPTER D DEICER BOOTS SERVICING 12-20-00 DEICER BOOTS-RESURFACING ICE AND RAIN PROTECTION 30-10-00 DEICER SYSTEM-AIRFOIL ICE ANO RAIN PROTECTION 30-10-00 DIF CONT & SAFETY VALVE ADJUSTMENT AIR CONDITIONING 21-30-00 DIF CONT & SAFETY VALVE INSTALLATION AIR CONDITIONIMG 21-30-00 DIF CONT & SAFETY VALVE REMOVAL AIR CONDITIONING 21-30-00 DIFFERENTIAL CONTROL VALVE AIR CONOITIONING 21-30-00 DIMENSIONS-AIRCRAFT DIMENSIONS AND AREAS 06-00-00 DISTRIBUTION AIR CONDITIONING 21-20-00 II ELECT TRIM TAB ACT MAG CLUTCH INST FL1GHT CONTROLS 27-3Œ-00 ELECT TRIM TAB ACT MAG CLUTCH TEST FLIGHT CONTROLS 27-30-00 ELECT TRIM TAB ACT MAG CLUTCH REMOVAL FLIGHT CONTROLS 27-30-00 ELECTRIC TRIM TAS ACTUATOR INSTALLATION FLIGHT CONTROLS 27-30-00 ELECTRIC TRIM TAB ACTUATOR REMOVAL FLIGHT CONTROLS 27-3Œ-00 ELECTRIC TRIM TAS CABLE INSTALLATION FLIGHT CONTROLS 27-30-00 ELECTRICAL UTILIZATION LOAD CHART ELECTRICAL POWER 24-50-00 ELEVATOR BALAMCING STABILIZERS 55-20-00 ELEVATOR CABLE INSTALLATION FLIGHT CONTROLS 27-30-00 ELEVATOR CABLE REMOVAL FLIGHT CONTROLS 27-30-00 ELEVATOR CONTROL SYSTEM RIGGING FLIGHT CONTROLS 27-30-00 ELEVATOR INSTALLATION FLIGHT CONTROLS 27-30-00 ELEVATOR REMOVAL FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAB ACTUATOR INSTALLATION FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAB ACTUATOR REMOVAL FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAB CABLE INSTALLATION FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAB CABLE REMOVAL FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAB RIGGING FLIGHT CONTROLS 27-30-00 ELEVATOR TRIM TAS-CHECKING FREE PLAY FLIGHT CONTROLS 27-30-00 ELT BATT REPL, COLLINS/COMM COMP CORP EQUIPMENT/FURNISHINGS 25-60-00 ELT BATTERY REPLACEMENT, NARCO EQUIPMENT/FURNISHINGS 25-60-00 EMERGENCY LOCATOR.TRANSMITTER EQUIPMENT AND FURNISHIMGS 25-60-00 EMPENNAGE STABILIZERS 55-00-00 ENGINE AIR INDUCTION SYSTEM TURBINES 81-00-00 ENGINE BUILO-UP POWER PLANT 71-00-00 ENGINE GRDUND RUNNING ANO WARM-UP POWER PLANT 71-00-00 ENGINE IOLE SPEED & MIXTURE ADJUSTMENT POWER PLANT 71-00-00 ENGINE INSTALLATION POWER PLANT 71-00-00 ENGINE DILS-APPROVED CHARTS 91-00-00 ENGINE OILS-APPROVED OIL 79-00-00 ENGINE OVERSOOST CONTROL TURBINES 81-00-00 ENGINE OVERHAUL ENGINE 72-00-00 ENGINE REMOVAL POWER PLANT 71-0Œ-00 EQUIPMENTwTEST (PO4 & AFTER) AIR CONDITIONING 21-30-00 EVAPORATOR AIR FILTER REPLACEMENT AIR CONDITIONING 21-50-00 EVAPORATOR AIR FILTER REPLACEMENT SERVICING 12-10-00 EXTERNAL POWER ELECTRICAL POWER 24-40-00 EXTERNAL POWER SERVICING 12-20-00 FIBERGLASS CDMPONENTS-REPAIR OF STRUCTURES 51-00-00 FIREWALL SHUT-OFF VALVE AIR CONDITIONING 21-10-00 FLAP ACTUATOR INSTALLATION FLIGHT CONTROLS 27-50-00 FLAP ACTUATOR REMOVAL FLIGHT CONTROLS 27-50-00 FLAP CONTROL SYSTEM RIGGING FLIGHT CONTROLS 27-50-00 FLAP FUNCTIONAL GROUND TEST FLIGHT CONTROLS 27-50-00 FLAP INSTALLATION FLIGHT CONTROLS 27-50-00 FLAP MOTOR/GEARBOX INSTALLATION FLIGHT CONTROLS 27-50-00 FLAP MOTOR/GEARBOX REMOVAL FLIGHT CONTROLS 27-50-00 FLAP POS INO LIGHTS-ADJUST & CHECK FLIGHT CONTROLS 27-50-00 FLAP POSITION TRANSMITTER ADJUSTMENT FLIGWf CONTROLS 27-50-00 FLAP REMOVAL FLIGHT CONTROLS 27-50-00 FLAP TRACK ROLLER INSTALLATION FLIGHT CDNTROLS 27-50-00 FLAPS FLIGWT CONTROLS 27-50-00 INTRODUCTION PAGE 13 AUG 15/80 BEECHCRAFT OUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CHAPTER F FLARE FITTING TOROUE CHART CHARTS 91-00-00 FLARED FITTINGS FUEL 28-20-00 FLIGHT CONTROLS FLIGHT CONTROLS 27-00-00 FUEL BOOST PUMP INSTALLATION FUEL 28-20-00 FUEL BOOST PUMP REMOVAL FUEL 25-20-00 FUEL BOOST PUMPS FUEL 28-00-00 FUEL CELL DRAINS FUEL 28-00-00 FUEL CELL FLAPPER VALVE INSP-BAFFLED FUEL 28-10-00 FUEL CELL INST-INBOARD LEAOING EDGE FUEL 28-10-00 FUEL CELL INST-OUTSOARO LEADING EDGE FUEL 28-10-00 FUEL CELL INSTALLATION-BOX SECTION FUEL 28-10-00 FUEL CELL INSTALLATION-NAGELLE FUEL 28-10-00 FUEL CELL LEAKAGE CHECK FUEL 28-10-00 FUEL CELL REMOVAL-BOX SECTION FUEL 28-10-00 FUEL CELL REMOVAL-INSD LEAOING EDGE FUEL 28-10-00 FUEL CELL REMOVAL-NAGELLE FUEL 28-10-00 FUEL CELL REMOVAL-OUTBD LEADING EDGE FUEL 28-10-00 FUEL CELL REPAIR-GOODYEAR FUEL 28-10-00 FUEL CELL REPAIR-UNIROYAL FUEL 28-10-00 FUEL CELL VELCRO TAPE-INST OF FUEL 28-10-00 FUEL CELL VENT FLOAT VALVE INSTALLATION FUEL 28-20-00 FUEL CELL VENT FLOAT VALVE REMOVAL FUEL 28-20-00 FUEL CELL VENT LINE-EXTERNAL rUEL 28-20-00 FUEL CELLS FUEL 28-00-00 FUEL CELLS-FILLING SERVICING 12-10-00 FUEL CROSSFEED FUEL 28-00-00 FUEL FILTER5 AND &CREENS-ENGINE SERVICING 12-10-00 FUEL FLOW INDICATOR ENGINE FUEL AND CONTROL 73-30-00 FUEL GAGING SYSTEM-ADJUST AND TEST FUEL 28-40-00 FUEL MANOLING PRACTICES FUEL 28-00-00 FUEL PUMP AOJUSTMENT-ENGINE DRIVEN FUEL 28-20-00 FUEL PUMP INSTALLATION-ENGINE ORIVEN FUEL 28-20-00 FUEL PUMP REMOVAL-ENGINE DRIVEN FUEL 28-20-00 FUEL QUANTITY INDICATORS FUEL 28-40-00 FUEL SELECT VALVE CONT CABLE REMOVAL FUEL 28-20-00 FUEL SELECT VALVE CONT CABLE RIGGING FUEL 28-20-00 FUEL SELECT VALVE CONT CABLE INSTALL FUEL 28-20-00 FUEL SELECTOR VALVE INSTALLATION FUEL 28-20-00 FUEL SELECTOR VALVE REMOVAL FUEL 28-20-00 FUEL SYSTEM-ORAINING SERVICING 12-10-00 FUEL TRANSMITTER INSTALLATION FUEL 28-40-00 FUEL TRANSMITTER REMOVAL FUEL 28-40-00 FUSELAGE ACCESS OPENINGS FUSELAGE 53-30-00 G GENERATOR ELECTRICAL POWER 24-00-00 GENERATOR BRUSH REPLACEMENT ELECTRICAL POWER 24-30-00 GENERATOR CURRENT ADJ-MAXIMUM LOAD ELECTRICAL POWER 2+-30-00 GENERATOR INSTALLATION ELECTRICAL POWER 24-30-00 GENERATOR PARALLELING ELECTRICAL POWER 24-30-00 GENERATOR PARALLELING RHEOSTATS-ADJUST ELECTRICAL POWER 24-30-00 GENERATOR PARALLELING-FINAL CHECKS ELECTRICAL POWER 24-30-00 GENERATOR REMDVAL ELECTRICAL POWER 24-30-00 GENEA&TDR -SYSTEM STABILIZATION ELECTRICAL POWER 24-30-00 GENERATOR VOLTAGE ADJUST-MINIMUM LOAD ELECTRICAL POWER 24-30-00 GENERATOR VOLTAGE REGULATOR ADJUST ELECTRICAL POWER 24-30-00 GUST LOCK FLEGHT CONTROLS 27-70-00 GYRO INSTRUMENT PRESSURE REGULATOR PNEUMATIC 36-00-00 H HEATER CONTRDL SYSTEM AIR CONDITIONING 21-40-00 HEATER FUEL PUMP AIR ONDITIONING 21-40-00 HEATER IGNITION AIR CONDITIONING 21-40-00 HEATER INSTALLATION AIR CONDITIONING 21-40-00 HEATER OPERATION AIR CONDITIONING 21-40-00 INTRODUCTION PAGE 14 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPMABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CHAPTER H HEATER REMOVAL AIR CONDITIONING 21-40-00 HEATER SYSTER AIR CONDITIONING 21-40-00 MEATER VIBRATOR INSTALLATION AIR CONDITIONING 21-40-00 HEATER VIBRATOR REMOVAL AIR CONDITIONING 21-40-00 HEATING AIR CONDITIONING 21-40-00 HYDROLOK LOCKS EQUIPMENT AND FURNISHINGS 25-00-00 I IGNITIDN MARNESS IGNITION 74-20-00 INDUCTION AIR FILTER SERVICING 12-20-00 INDUCTION SYSTEM AIR INTAKES ICE AND RAIN PROTECTION 30-20-00 INSPECTION GUIDE TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-CABIN SECTION TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-DUAL BUS FEEDER DIODES ELECTRICAL POWER 24-50-00 INSPECTION-EMERGENCY LDCATOR EQUIPMENT AND FURNISHING 25,50-00 INSPECTION-GENERAL TIME LIMÌTS/MAINTENANCE CK 05-20-00 INSPECTION-LOG GEAR DYNAMIC BRAKE RELAY LANDING GEAR 32-30-00 INSPECTION-LOG GEAR RETRACT MECH 100-HR LANOING GEAR 32-30-00 INSPECTION-MAIN GEAR ANO BRAKE TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-MAIN GEAR RETRACTION TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-MAIN GEAR 100-HR LANDING GEAR 32-10-00 INSPECTION-MAIN WHEEL LANOING GEAR 32-40-00 INSPECTION-MAIN WHEEL TIRE & BRAKE LANDING GEAR 32-40-00 INSPECTION-NAGELLE TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-NOSE GEAR RETRACTION TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTIDM-NOSE GEAR 100-HOUR LANDING GEAR 32-20-00 INSPECTION-NOSE SECTION TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-NOSE STEERING 100-HOUR LANDING GEAR 32-50-00 INSPECTIDM-NOSE WHEEL LANDING GEAR 32-40-00 INSPECTION-OPERATIONAL TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-PITOT SYSTEM HOSE NAVIGATION 34-10-00 INSPECTION-POWER PLANT TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-PRESSURE DIST DUCTS-100-HOUR AIR CONDITIONING 21-20-00 INSPECTION-PROP CONTROLLING-100-HOUR PROPELLERS 61-00-00 INSPECTIOR-PROPELLER DEICER 100-HOUR TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-PROPELLER DEICER 50-HOUR TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-PROPELLER 100-NOUR PROPELLERS 61-00-40 1NSPECTIDM-REAR FUSELAGE & EMPENNAGE TIME LIMITS/MAINTENANCE CK 05-20-00 INSPECTION-WING FRONT SPAR CAP WINGS 57-40-00 INSPECTION-WING 100-HOUR WINGS 57-00-00 INSPECTIOR-WINGS TIME LIMITS/MAINTENANCE CK 05-20-00 INSTRUMENT ACCESS NAVIGATION 34-00-00 INSTRUMENT OPERATION NAVIGATION 34-00-00 INTERCDOLER CONTROL RIGGING AIR CONDITIONING 21-10-00 INTERCOOLER INSTALLATION AIR CONDITIONING 21-10-00 INTERCOOLER REMOVAL AIR CONDITIONING 21-10-00 JACKING-A1RCRAFT LIFTING AND SHORING 07-00-00 L LAMP BULB REPLACEMEMT LIGHTS 33-40-00 LANOING GEAR DYNAMIC BRAKE RELAY REMOVAL LANDING GEAR 32-30-00 LANDING GEAR LIMIT SWITCHES ADJUST LANDING GEAR 32-60-00 LANDING GEAR KANUAL EXTENSION SYSTEM LANDING GEAR 32-00-00 LANDING GEAR MOTOR E ACTUATOR INSTALL LANDING GEAR 32-30-00 LANDING GEAR MOTOR & ACTUATOR REMOVAL LANDING GEAR 32-30-00 LANDING GEAR POSITION LIGHTS ADJUST LANDING GEAR 32-60-00 LANDING GEAR RETRACT SYSTEM LUBRICATION LANDING GEAR 32-30-00 LANDING GEAR RIGGING LANOING GEAR 32-30-00 LANOING GEAR SAFETY SWITCH ADJUST LANDING GEAR 32-60-00 LANDING GEAR SAFETY SYSTEM LANOING GEAR 32-00-00 LANDING GEAR SAFETY SYSTEM LANDING GEAR 32-60-00 LANDING GEAR SAFETY SYSTEM CHECK LANDING GEAR 32-60-00 INTRODUCTION PAGE 15 AUG 15/80 BEECHCRAFT DUKE 60 SERIE5 MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CHAPTER I. LANOING GEAR SYSTEM LANDING GEAR 32-00-00 LDG GEAR SAFETY SYS MICROSWITCH ADJUST LANDING GEAR 32-60-00 LOG GEAR SAFETY SYS PRESS SWITCH ADJUST LANDING GEAR 32-60-00 LDG GEAR/THROTTLE WARNING HORN SWITCH POWER PLANT 71-00-00 LEAK CHECKS & REPAIRS MET WING TIP FUEL 28-10-00 LEAK TEST-MET WING TIP FUEL 28-10-00 LEAKAGE TEST.CASIN PRESSURIIATION (P-4 & AIR CONDITIONING 21-30-00 LEVELING-AIRCRAFT LEVELING AND WEIGHTING 08-00-00 LOCKS,HYDROLOK EQUIPMENT AND FURNISHINGS 25-00-00 LOCKS.ROTON SERVICING 12-20-00 LOCKS,ROTON EQUIPMENT AND FURNISHINGS 25-00-00 LUBRICATION SCHEDULE CHART SERVICING 12-20-00 M MAGNETO BREAKER POINT ADJUSTMENT IGNETION 74-10-00 MAGNETO DROP-OFF CHECK IGNITION 74-10-00 MAGNETO TIMING ISMITION 74-10-00 MAIN GEAR DOWNLOCK/UPLOCKSWITCH ADJUST LANDING GEAR 32-30-00 MAIN GEAR INSTALLATION LANOING GEAR 32-10-00 MAIN GEAR LUBRICATION LANDING GEAR 32-10-00 MAIN GEAR REMOVAL LANDING GEAR 32-10-00 MAIN GEAR SHOCK ASSORBERS SERVICING LANDING GEAR 32-10-00 MAIN WHEEL AND TIRE LANDING GEAR 32-40-00 MAIN WHEEL ASSEMBLIES LANDING GEAR . 32-40-00 MODEL DESIGNATION PLACARD PLACMtDS AND MARKINGS 11-00-00 MOORING-AIRCRAFT PARKING AND MOORING 10-00-00 N NOSE GEAR DOWNLOCK/UPLOCK SWITCH ADJ LANDING GEAR 32-30-00 emSE GEAR INSTALLATION LANDING GEAR 32-20-00 NOSÆ GEAR LUBRICATION LANDING GEAR 32-20-00 NOSE GEAR REMOVAL LANDING GEAR 32-20-00 NOSE GEAR SHOCK ABSORBER SERVICING LANDING GEAR 32-20-00 NOSE STEERING ADJUSTMENT LANDING GEAR 32-50-00 NOSE WHEEL AND TIRE LANDING GEAR 32-40-00 NDSE WHEEL ASSEMBLY LANOING GEAR 32-40-00 0 OIL FILTER CHAMGING SERVICING 12-10-00 OIL FILTER CHANGING OIL 79-00-00 OIL PRESSURE ADJUSTMENT POWER PLANT 71-00-00 OIL SYSTEM SERVICING 12-10-00 OUTBOARD WING WINGS 57-00-00 OUTFLOW VALVE FLIGHT CHECK AIR CONOITIONING 21-30-00 OVERHAUL AND REPLACEMENT SCHEDULE TIME LIMITS/MAINTENANCE CK 05-10-00 OVERVOLTAGERELAY CHECK ELECTRICAL POWER 24-30-00 OVERVOLTAGE RELAYS ELECTRICAL PONER 24-30-00 OXYGEN CYLINOER REPLACEMENT OXYGEN 35-00-00 OXYGEN CYLINDER RETESTING OXYGEN 35-00-00 OXVGEN SYSTEM SERVICING 12-10-00 OXYGEN SYSTEM OXYGEN 35-00-00 OXYGEN SYSTEM PURGING OXYGEN 35-00-00 ÖXYÖEÑ SYSTEM TEST PROCEDURES OXYGEN 35-00-00 P PAINT FINISHES-EXTERIOR & INTERIOR STANDARD PRACTICES-AIRFRAME20-00-00 PAINT PRIMERS-EXTERIOR & INTERIDR STANDARO PRACTICES-AIRFRAME20-00-00 PAINT REMOVAL-MAGNESIUM SURFACES STANOARO PRACTICES-AIRFRAME20-00-00 PAINT REPAIR PROCEDURES-URETNANE STANDARD PRACTICES-AIRFRAME20-00-00 PAINT-ENANEL EXTERIDR COLORS STANDARD PRACTICES-AIRFRAME20-00-00 PAINT-ENAMEL INTERIOR COLORS STANDARO PRACTICES-AIRFRAME20-00-00 PAINT-ENANEL TOP COAT APPLICATION STANDARD PRACTICES-AIRFRAME20-00-00 PAINT-ENAMEL TDUCH-UP REPAIR STANDARD PRACTICES-AIRFRAME20-00-00 INTRODUCTION PAGE 16 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUS CHAPTER P PAINT-PREPARATION OF EXTERIOR FOR STANDARD PRACTICES-AIRFRAME20-00-00 PAINT-SPECIAL PROCEDURES STANOARD PRACTICES-AIRFRAME20-OD-00 PAINT-URETHANE EXTERIOR COLORS STANDARD PRACTICES-AIRFRAME20-DO-00 PAINT-URETHANE PRETREATMENT PRIMER STANDARD PRACTICES-AIRFRAME20-OO-00 PAINT-URETHANE STRIPPING & CLEANING STANDARD PRACTICES-AIRFRAME20-OO-00 PAINT-URETNANE TOP COAT APPLICATION STANOARD PRACTICES-AIRFRAME20-OO-00 PAINT-URETHANE TOUCH-UP REPAIRS STANDARD PRACTICES-AIRFRAME20-OO-00 PAINTING KAGRESIUM SURFACES STANDARD PRACTICES-AIRFRAME20-OO-00 PARKING BRAKE ADJUSTMENT LANDING GEAR 32-40-00 PARKING BRAKE VALVE INSTALLATION LANDING GEAR 32-40-00 PARKING BRAKE VALVE REMOVAL LANDING GEAR 32-40-00 PARKING-AIRCRAFT PARKING AND MOORING 1Œ-00-00 PITOT AND STATIC PRESSURE SYSTEM NAVIGATION 34-10-00 PITOT AND STATIC SYSTER ICE AND RAIN PROTECTION 30-30-00 PITOT SYSTEM LEAK TEST NAVIGATION 34-10-00 PNEUMATIC PRESS REGULATION-TURN/SLIP PNEUMATIC 36-00-00 PNEUMATIC PRESSURE SYSTEM PNEUMATIC 36-00-00 PNEUMATIC PRESSURE SYSTEM ADJUSTWENT PNEUMATIC 36-00-00 PNEUMATIC PRESSURE SYSTEM SERVICING PNEUMATIC 36-00-00 PNEUMATIC SUPPLY PRESSURE REGULATORS PNEUMATIC 36-00-00 PRESSURIZATION CHARACTERISTICS AIR GONDITIONING 21-30-00 PRESSURIZATION CONTROL AIR CONDITIONING 21-30-00 PRESSURIZATION LEAKAGE TESTeCABIN AIR CONDITIONING 21-30-00 PRESSURIZATION SYSTEM AIR CONDITIONING 21-00-00 PRESSURIZATION SYSTEM ADJUSTMENT AIR CONDITIONING 21-30-00 PRESSURIZATION TEST PROCEDURE AIR CONDITIONING 21-30-00 PRESSURIZATION TEST SWITCH AIR CONDITIONING 21-30-00 PROP DEICER BRUSH BLOCK RESIST CHECK ICE AND RAIN PROTECTION 30-60-00 PROP DEICER BRUSH REPLACEMENT ICE AND RAIN PROTECTION 30-60-00 PROP DEICER BRUSH/SLIP RING RESIST ICE AND RAIN PROTECTION 30-60-00 PROP DEICER SLIP RING MACWINING ICE AND RAIN PROTECTION 30-60-00 PROPELLER ACCUMULATOR PROPELLERS 61-00-00 PROPELLER ACCUMULATOR SERVICING 12-20-00 PROPELLER ACCUMULATOR INSTALLATION PROPELLERS 61-00-00 PROPELLER ACCUMULATOR REMOVAL PROPELLERS 61-00-00 PROPELLER ADJUSTMENT PROPELLERS 61-00-00 PROPELLER BLADE BEARING LUBRICATION SERVICING 61-00-00 PROPELLER BLADE BEARING LUBRICATION PROPELLERS 61-00-00 PROPELLER BLADE REPAIR PROPELLERS 6.1-00-00 PROPELLER DEICER BOOT INSTALLATION ICE AND RAIN PROTECTION 30-60-00 PROPELLER DEICER BOOT REMOVAL ICE ANO RAIN PROTECTION 30-60-00 PROPELLER DEICER BOOT REPAIR ICE AND RAIN PROTECTION 30-60-00 PROPELLER DEICER CONTINUITY TEST ICE AND RAIN PROTECTION 30-60-00 PROPELLER DEICER HEAT TEST ICE AND RAIN PROTECTION 30-60-00 PROPELLER DEICER TIMER CHECK ICE AND RAIN PROTECTION 30-60-00 PROPELLER DEICING SYSTEM ICE AND RAIN PROTECTION 30-60-00 PROPELLER FEATHERING ADJUSTMENT PROPELLERS 61-00-00 PROPELLER GOVERNOR ADJUSTMENT PROPELLERS 61-00-00 PROPELLER GOVERNOR INSTALLATION PROPELLERS 61-00-00 PROPELLER GOVERNOR REMOVAL PROPELLERS 61-00-00 PROPELLER INSTALLATION PROPELLERS 61-00-00 PROPELLER LOW RPM AOJUSTMENT PROPELLERS 61-00-00 PROPELLER REMOVAL PROPELLERS 61-00-00 PROPELLER SERVICING POINTS SERVICING 12-20-00 PROPELLER SYNCHRONIZER PROPELLERS 61-00-00 PROPELLER SYNCHROSCOPE PROPELLERS 61-00-00 PROPELLERS PROPELLERS 61-00-00 PUBLICATION-VENDOR INTRODUCTION IN-TR-OO PUBLICATIONS-BEECH INTROOUCTION IM-TR-OD PUBLICATION5-SUPPLEMENTAAY INTRODUCTION IN-TR-OD R REFRIGERATIVE AIR COOLING SYSTEM AIR CONDITIONING 21-50-00 ROTON LOCKS SERVICING 12-20-00 ROTON LOCKS EQUIPMENT/FURNISH5 25-00-00 RUDDER BALANCIMG STABILIZERS 55-40-00 INTRODUCTION PAGE 17 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPDNENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME NAME SUB CNAPTER R RUDDER CABLE INSTALLATION FLIGHT CONTROLS 27-20-00 RUDDER CABLE REMOVAL FLIGHT CONTROLS 27-20-00 RUDDER CONTROL SYSTEM RIGGING FLIGHT CDNTROLS 27-20-00 RUDDER INSTALLATION FLIGHT CONTROLS 27-20-00 RUDDER REMOVAL FLIGHT CONTROLS 27-20-00 RUDDER TRIM TAB ACTUATOR INST FLIGHT CONTROLS 27-20-00 RUDDER TRIM TAB ACTUATOR REMOVAL FLIGHT CONTROLS 27-20-00 RUDDER TRIA TAB CABLE IN5TALLATION FLIGHT CONTROLS 27-20-00 RUDDER TRIM TAB CABLE REMOVAL FLIGHT CONTROLS 27-20-00 RUDDER TRIM TAB RIGGING FLIGNT CONTROLS 27-20-00 RUDDER TRIM TAB-CHECKING FREE PLAY FLIß¾T CONTROLS 27-20-00 SAFETY & DUTFLOW VALVE TEST AIR CONDITIONING 21-30-00 SAFETY VALVE AIR CONDITIONING 21-30-00 SAFETY VALVE GROUNO CHECK AIR CONDITIONING 21-30-00 SCHEDULEO MAINTENANCE CHECKS TIME LIMITS/MAINTENANCE CK 05-20-00 SEALING MATERIALS CHARTS 91-00-00 SEALING MATERIALS-APPLICATION OF CHARTS 91-0Œ-00 SEAT BACK AOJUST-FLIGHT COMPARTMENT EQUIPMENT/FURNISHINGS 25-00-00 SEAT BACK A0JUST-PAS5ENGER EQUIPMENT/FURNISHINGS 25-00-0G SEATrINSTALLATION-FLIGHT COMPARTMENT EQUIPMENT/FURNISHINGS 25-00-00 SEAT INSTALLATION-PASSENGER EQUIPMENT/FURNISHINGS 25-00-00 SEAT REMOVAL-FLIGHT COMPARTMENT EQUIPMENT/FURNISHING5 25-00-00 SEAT REMOVAL-PASSENGER EQUIPMENT/FURMISHINGS 25-0Œ-00 SERVICING CHART SERVICING 12-20-00 SHIMMY OAMPENER INSTALLATION LANDING GEAR 32-20-00 SHIMMY DAMPENER REMOVAL LANOING GEAR 32-20-00 SHOCK STRUTE SERVICING 12-20-00 SPARK PLUG IN5P AND SERV-HEATER AIR CONDITIONIMG 21-40-00 SPARK PLUS-HEATER SERVICING 12-10-00 SPECIAL TOOLS SERVICING 12-20-00 STABILIZER INSTALLATION-NORIZONTAL STASILIZERS 55-10-00 STABILIZER INSTALLATION-VERTICAL STABILIZERS 55-30-00 STABILIZER REMOVAL-NDRIZONTAL STABILIZERS 55-10-00 STABILIZER REMOVAL-VERTICAL STABILIZERS 55-30-00 STALL STRIP INSTALLATION ICE AND RAIN PROTECTION 30-10-00 STALL STR1PS-METAL WINGS 57-00-00 STALL WARNING INDICATING SYSTEM ADJ FLIGHT CONTROLS 27-60-00 STALL MARNIMG INDICATOR INSTALLATION FLIGHT CONTROLS 27-60-00 STALL WARNING INDICATOR REMOVAL FLIGHT CONTROLS 27-60-00 STALL WARNING SYSTEM FLIGHT CONTROLS 27-60-00 STARTER STARTING 80-00-00 STARTER BRUSHES STARTIhn 80-10-00 STARTER CIRCUITT CHECKS STARTING 80-10-00 STARTER INSTALLATION STARTING 80-10-00 STARTER LUBRICATION STARTING 80-10-00 STARTER REMOVAL STARTING 80-10-00 STATIC DISCHARGING COMMUNICATIONS 23-60-00 STATIC SYSTEM CLEANING MAVIGATION 34-10-00 STATIC SYSTEM LEAK TEST MAVIGATION 34-10-00 STATIC MICK INSTALLATION COMMUNICATIONS 23-60-00 STATIC MICK REMOVAL COMMUNICATIONS 23-60-00 STATION DIAGRAM DIMENSIONS AND AREAS 06-00-00 $7RSOEF LGY-PWR SUP UNIT INST-GRIMESESDI LIGHTS 33-40-00 STROBE LGT-POWER CABLE CNECK-HOSKINS LIGWTS 33-40-00 STROBE LGT-PWR SUP UNIT CHKS-HOSKINS LIGHTS 33-40-00 STRO6E LGT-PWR SUP UNIT INST-MOSKINS LIGHTS 33-40-00 STROBE LGT-PWR SUP UNIT REM-GRIMES & SOI LIGHTS 33-40-00 STROBE LGT-PMR SUP UNIT REM-NDSKINS LIGH15 33-40-00 STROBE LGT-TIMER MODULE CHK-HOSKINS LIGHTS 33-40-00 STROBE LIGHT REPLACEMENT-GRIMES & SDI LIGHTS 33-40-00 STROBE LIGHT MIRING-GRIMES & SOI LIGHTS 33-40-00 STROBE LIGHT-SYS CHECK OUT-HOSKINS LIGHTS 33-40-00 STROBE LIGHTS-HIGN INTENSITV-NOSKINS LIGHTS 33-00-00 STROBE LIGHTS-HIGH INTENSITY-GRIMES&SDI LIGHTS 33-00-00 INTRODUCTION PAGE 18 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & DR SYSTEM NAME MAME SUB CHAPTER STRUCTURAL REPAIR STRUCTURES 51-00-00 SURFACE DEICER BOOT INSTALLATION ICE AND RAIN PROTECTION 30-10-00 SURFACE DEICER BOOT REMOVAL ICE AND RAIN PROTECTION 30-10-00 SURFACE DEICER COMPONENT LOCATION ICE AND RAIN PROTECTION 30-10-00 SURFACE DEICER COMPONENT REPLACEMENT ICE AND RAIN PROTECTION 30-10-00 SURFACE DEICER SERVICING ICE AND RAIN PROTECTION 30-10-00 SYNCHRONIZER CMECKS PROPELLERS 61-00-00 SYNCHRONIZER FLIGHT CHECKS . PROPELLERS 61-00-00 SYMCHRONIZER FUNCTIONAL TEST PROPELLERS 61-00-00 SYNCHRONIZER RIGGING PROPELLERS 61-00-00 SYMCHRONIZER WIRING CHECK PROPELLERS 61-00-00 T TABLE OF TORQUES CHARTS 91-00-00 TEST EQUIPMENT AIR CONDITIDMING 21-30-00 TEST GUTFLON & SAFETY VALVE AIR CONDITIONING 21-30-00 TEST PROCEDURE (P-4 & AFTER) AIR CONDITIONING 21-30-00 TESTeCABIN PRESSURIZATIDN LEAKAGE AIR CONDITIONING 21-30-00 THREAD LUBRICANTS CHARTS 91-00-00 THREAD LU6RICANTS CHART SERVICING - 12-20-00 TIRES LANDING GEAR 32-40-00 TIRES SERVICING 12-20-00 TIT INDICATOR CALIBRATION ENGINE INDICATING 77-00-00 TOILET , CHEMICAL, CLEANING WATER/WASTE 38-30-00 TOROUE WREMCHES STANDARD PRACTICES-AIRFRAME20-OO-00 TOROUING COARSE THREAD BOLTS CHARTS 91-00-00 TOROUING FINE THREAD BOLTS CHARTS 91-00-00 TOWING-AIRCRAFT TOWING TAXING 09-00-00 TRIM TAB FREE PLA¥ CHECK-AILERON FLIGNT COMTROLS 27-10-00 TRIM TAB FREE PLAY CHECK-ELEVATOR FLIGHT CONTROLS 27-30-00 TRIM TA6 FREE PLAY CHECK-RUODER FLIGHT CONTROLS 27-20-00 TROUBLESHOOTING- ICE AND RAIN PROTECTION 30-40-00 TROUBLESHOOTING- TURBINES 81-00-00 TAOUBLESHOOTING-AIR CONDITIONING SYS AIR CONDITIONING 21-00-00 TROUBLESHOOTING-AIRFOIL DEICER SYST ICE AND RAIN PROTECTION 30-10-00 TROUBLESHOOTING-BATTERY ELECTRICAL POWER 24-31-10 TROUBLESHOOTING-BATTERY SYSTEM ELECTRICAL PONER 24-31-00 TROUBLESHOOTING-BRAKE SYSTEM LANDING GEAR 32-00-00 TROUBLESHOOTING-ENGINE POWER PLANT 71-00-00 TROUBLESHOOTING-GENERATOR SYSTEM ELECTRICAL POMER 24-30-00 TROUBLESHOOTING-HEATER SYSTEM AIR CONDITIONING 21-00-00 TAOUBLESHOOTING-LANDING LIGHTS LIGHTS 33-40-00 TROUBLESHOOTING-LDG GEAR ELECT SYST LANDING GEAR 32-00-00 TRDUBLESHOOTING-NEM-MATIC AUTOPILOT AUTO FLIGHT 22-11-00 TROUBLESHOOTING-PITOT & STATIC SYST NAVIGATION 34-10-00 TROUBLESHOOTING-PRESSURIZATION SYST AIR CONDITIONING 21-00-00 TROUBLESHOOTING-PROP DEICING SYSTEM ICE AND RAIN PROTECTION 30-60-00 TROUBLESHOOTING-PROP SYNCHRONIZER PROPELLERS 61-00-00 TROUBLESHOOTING-STALL MARNING SYSTEM FLIGHT CONTROLS 27-60-00 TROUBLESHOOTING-STARTER SYSTEM STARTING 80-10-00 TROUBLESHOOTING-STROBE LIGHTS LIGMTS 33-40-00 TURBOCRARGER CONTROL SYSTEM TURBINES 81-00-00 TURBOCHARGER CRITICAL ALTITUOE TEST TURBINES 81-00-00 TURBOCHARGER INSTALLATION & RUN-IN TURBINES 81-00-00 TURBOCHARGER SYSTEM TURBINES 61-00-00 TURBOCHAR6ER VARIABLE PRESS CONT ADJUST TURBINES 81-00-00 TURBOCHARGER WASTEGATE SNAFT LUBE TURBINES 81-00-00 TURBOCWARGER WASTEGATE VALVE ADJUST TURBINES 81-00-00 TURBOCHARGER-TNRDTTLE/CONTROLLER RIG TURBINES 81-00-00 V VALVE CHECKeGRDUND.SAFETY AIR CONDITIONING 21-30-00 VALVE FLIGHT CHECK,0UTFLOW AIR GONDITIONING Z1-30-00 VALVE.SAFETY & OUTFLOW TEST AIR CONDITIONING 21-30-00 INTROOUCTION PAGE 19 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCEMANUAL ALPHABETICAL INDEX COMPONENT ITEM CHAPTER CHAPTER & OR SYSTEM NAME MAME SUS CHAPTER liu' WASTE DISPOSAL-OESC & OPER WATEK/WASTE 38-30-00 WASTE DISPOSAL-MAINT PRACTICES WATER/WASTE 38-30-00 WET WING TIP INSTALLATION FUEL 28-10-00 WET WING TIP REMOVAL FUEL 28-10-00 WIMOOW HINGE INSTALLATION-STORM WINDOWS 56-10-00 WINDOW HINGE REMOVAL-STORM WINDOWS 56-10-00 WIMDOW INSTALL-FLIGHT COMPARTMENT SIDE WINDOWS 56-10-00 WINDOW INSTALLATION-CABIN 510E WINDOWS WINDOWS 56-20-00 WINOOW LATCH INSTALLATIDN-STORM WINDOWS 56-10-00 WINDOW LATCH REMOVAL-STORM WINDOWS 56-10-00 WINDOW REMOVAL-CASIN SIDE WINDOWS 56-20-00 WINDOW REMOVAL-FLIGNT COMPARTMENTSIDE WINDOWS 56-10-00 WINDOWS-CLEANING SERVICING 12-20-00 WINDOWS-CLEANING WINDOWS 56-00-00 INDSHIELD DEICER SYSTEM ICE AND RAIN PROTECTION 30-40-00 WINDSHIELO FUNCTIONAL TEST-HEATED ICE AND RAIN PROTECTION 30-40-00 WINDSHIELO NEAT SENSOR ELEMENT RES CHK ICE AND RAIN PROTECTION 30-40-00 WINDSWIELO INSTALLATION WINDOWS 56-10-00 WINDSHIELD REMOVAL WINDOWS 56-10-00 WINDSHIELO RESISTANCE CHECK-HEATED ICE AND RAIN PROTECTION 30-40-00 WING ACCESS OPENINGS WINGS 57-30-00 WING ADJUSTMENT WINGS 57-00-00 WING ASSEMBLY WINGS 57-00-00 WING ATTACH FITTINGS WINGS 57-40-00 WING BOLT REPLACEMENT P-4 THRU P-61 WERGS 57-00-00 WING DISASSEM6LY WINGS 57-00-00 WING INSTALLATION WENGS 57-00-00 ING REMOVAL WINGS 57-00-00 WING TIP INSTALLATION WINGS 57-00-00 WING TIP REMOVAL WINGS 57-00-00 "END" INTRODUCTION PAGE 20 AUG 15/80 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL CHAPTER 5 LIST OF PAGE EFFECTIVITY CHAPTER SECTION SUBJECT PAGE DATE 5-EFFECTIVITY 1 Nov 20/87 5-CONTENTS 1 Nov 20/87 5-10-00 201 Nov 20/87 202 Nov 20/87 203 Nov 20/87 204 Nov 20/87 205 Nov 20/87 206 Nov 20/87 207 Nov 20/87 5-20-00 201 ¯ Nov 20/87 202 Nov 20/87 203 Nov 20/87 204 Nov 20/87 205 Nov 20/87 206 Nov 20/87 207 Nov 20/87 208 Nov 20/87 209 Nov 20/87 210 Nov 20/87 211 Nov 20/87 212 Nov 20/87 213 Nov 20/87 214 Nov 20/87 215 Nov 20/87 216 Nov 20/87 217 Nov 20/87 218 Nov 20/87 219 Nov 20/87 220 Nov 20/87 221 Nov 20/87 222 Nov 20/87 223 Nov 20/87 224 Nov 20/87 225 Nov 20/87 226 Nov 20/87 227 Nov 20/87 228 Nov 20/87 "END" 5-EFFECTIVITY Page 1 A.18: Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL CHAPTER 5 - TIME LIMITS/MAINTENANCE CHECKS TABLE OF CONTENTS SUBJECT CHAPTER PAGE 5-10-00 Overhaul and Replacement Schedule . . . . . . . . . . . . . . . . . . . . . 201 Landing Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Power plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Electrical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Utility system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Flaps and flight controls . . . . . . . . . . . . . . . . . . . . . . . . 206 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 5-20-00 Scheduled Maintenance Checks - Maintenance Practices . . . . . . . . . . . . . 201 100-HOURINSPECTION ............................202 Operational Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Power Plant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 Nacelles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 Wings And Carry-Through Structure . . . . . . . . . . . . . . . . . . . . . 211 Cabin and Baggage Compartment . . . . . . . . . . . . . . . . . . . . . . . 214 Nose Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 Rear Fuselage and Empennage . . . . . . . . . . . . . . . . . . . . . . . . 218 Main Gear And Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Nose Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 Landing Gear Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 General . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Propeller Deicer System Inspection . . . . . . . . . . . . . . . . . . . . . . 227 Electric Propeller Deicer (50-Hour Guide) . . . . . . . . . . . . . . . . . 227 Electric Propeller Deicer (100-Hour Guide) . . . . . . . . . . . . . . . . . 227 "END" 5-CONTENTS Page 1 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHED- as well as the igniter power relay ULE and Landing Gear Control relay. The first overhaul or replacement must be Airplanes operated for Air Taxi, or other performed not later than the recommended than normal operation, and airplanes period. The condition of the item at the operated in humid tropics, or cold and end of the first period can be used as a damp climates, etc., may need more fre- criterion for determining subsequent quent inspections for wear, corrosion periods applicable to the individual air- and/or lack of lubrication. In these plane or fleet operation, provided the areas, periodic inspections should be operator has an approved monitoring sys- performed until the operator can set his tem. own inspection periods based on experi- ence. The time periods for inspections noted in this manual are based on average usage and average environmen .al conditions. NOTE NOTE The date noted on the "STANDARD The recommended periods do not AIRWORTHINESSCERTIFICATE", EAA constitute a guarantee the item Form No. 8100-2, which is issued will reach the period without with each new airpTane-, is to be malfunction as the aforementioned used as the basis for all TBO or factors cannot be controlled by replacement components listed in the manufacturer. the following schedule. SPECIAL CONDITIONS CAUTIONARY NOTE NOTICE An engine cycle is defined as the period of time from the initial WARNINH3 start to shutdown of the engine. This encompasses start-up, Prior to performing maintenance increase to full or partial power on an engine or the Airframe, (as required during a flight ALWAYSpull the starter control regime) and back to complete circuit breakers and the Landing engine shutdown. Normal opera- Gear circuit breaker. This will tion results in the number of kilT power to the starter control landings being equivalent to engine cycles. OVERHAUL AND REPLACEMENT SCHEDULE ITEM OVERHAUL OR REPLACE NOTE "On Condition" items are to be overhauled or replaced when inspection or performance of these items reveal potentially unsafe or unserviceable condition. LANDING GEAR Main gear Every 2000 hours 5-10-00 Page 201 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE LANDING GEAR (Cont'd) Nose Gear Every 2000 hours Actuator assembly Every 4000 hours or on condi- tion Retract motor Every 2000 hours Retract motor brushes Every 500 hours or on condition Shimmy damper Every 2000 hours or 3 years heels and tires On condition Brake assembly On condition Brake lining On condition Master cylinder On condition Shuttle valve assembly On condition Parking brake valve On condition All hose On condition POWER PLANT Engine Every 1600 hours for new engines with serial numbers L-804-59 and up and remana- factured engines shipped after March 1, 1976 and remanufactured and over- hauled engines which incor- porate improved cylinder assemblies (as described is the latest edition of Aver Lycoming Service Bulletio No. 334); every 1200 hours for all other engines Engine controls On condition Engine vibration isolator mounts On condition Exhaust system On Condition 5-10-00 Page 202 Nov 20/87 A3 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE POWER PLANT (Cont'd) Turbocharger and waste gate On condition Oil cooler On condition (replace when contaminated) Propeller (Hartze11) Every 2000 hours or 5 calendar years, whichever occurs first Propeller controls On condition Propeller governor every 1600 hours Dry air pressure pump Every 600 hours or on condition Propeller Accumulator Etery 1600 hours Hoses carrying flammable liquids When condition warrants, 5 years from date of deliv- ery, or at engine overhaul, whichever occurs first All other hoses On condition FUEL SYSTEM Fuel cells On condition Nacelle fuel quantity transmitter On condition. Wing fuel quantity transmitter On condition. Fuel cell drain valve On condition Fuel system check valves On condition Fuel selector-valve Every 1000 hours Fuel boost pump Every 800 hours Float valve On condition Hoses carrying flammable liquids When condition warrants, 5 years from date of deliv- ery, or at engine overhaul, whichever occurs first All other hoses On condition 5-10-00 Page 203 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE FUEL SYSTEM (Cont'd) Fuel pump, engine driven Every 1200 hours INSTRUMENTS Turn and bank indicator On condition Altimeter Every 24 months per FAAdirec- tive Directional gyro On condition Gyro horizon On condtion Dry air pressure gage On condition Cabin altitude control On condition Cabin altitude controller filter - standard On condition Cabin altitude controller filter - motorized Every 100 hours Manifold pressure gage On condition Airspeed indicator On condition Cabin differential pressure gage On condition Cabin altitude and pressure differential indicator On condition Rate-of-climb indicator On condition. Fuel pressure gage On condition Fuel flow gage On condition Tachometer On condition Flap position Ëndicator On condition Free air temperature indicator On condition Gyro instrument filter Every 500 hours Air pump inlet filter On condition All hoses On condition 5-10-00 Page 204 Nov 20/87 A1 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE INSTRUMENTS (Cont'd) Air pump inline filter 300 hours ELECTRICAL SYSTEM Landing gear dynamic brake relay On condition Battery master relay On condition Para11eling relay On condition All other relays On condition Voltage regulators On condition Heater vibrators Replace at heater overhaul Starter Inspect at engine overhaul and overhaul or replace on con- dition Starter relay On condition Generator On condition Battery (Emergency Locator Transmitter) At 50% of useful life (as stated on the battery) or any time transmitter is used more than one cumula- tive hour or after inad- vertent activation of unknown duration UTILITY SYSTEM Cabin _beater . Every 1000 hours or whenever - pressure decay test requirements cannot be met. See appropriate manufactur- er's manual Heater igniter and plug On condition Heater fuel pump On condition Heater fuel spray nozzle Replace at heater overhaul, 5-10-00 Page 205 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE UTILITY SYSTEM (Cont'd) Heater fuel shut-off valve On condition Combustion blower On condition Combustion blower brushes Every 500 hours Vent blower On condition Vent blower brushes Every 500 hours Condenser blower On condition Condenser blower brushes On condition Oxygen regulator Every 2000 hours or 48 months Oxygen cylinder (3HT) Hydrostatica11y test every 3 years, replace every 24 years or 4,380 refills (ICC regulation) Oxygen cylinder (3A or 3AA) Hydrostatica11y test every 5 years: no replacement dura- tion Differential control valve (P-4 thru P-307) Inspect every 100 hours, replace on condition Outflow valve (308 and after) Perform functional test every 500 hours Safety valve (P-4 thru P-307) Inspect every 100 hours, replace on condition Safety valve (P-308 and after) Perform functional test every 500 hours FLAPS AND FLIGHT CONTROLS Flight controls On condition Aileron tab actuator On condition Elevator tab actuator On condition Rudder tab actuator On condition Rudder pedal arm On condition or at 2000 hours 5-10-00 Page 206 Nov 20/87 Alf BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL OVERHAUL AND REPLACEMENT SCHEDULE (Cont'd) ITEM OVERHAUL OR REPLACE FLAPS AND FLIGHT CONTROLS (Cont'd) Flap motor and drives Every 2000 hours F1ap gearbox Every 2000 hours Flap actuators Every 2000 hours Flap flexible shaft Every 2000 hours MISCELLANEOUS Wing bolts Replace 10 years after the initial inspection. or on condition. See Chapter 57-00-00 "END" 5-10-00 Page 207 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL SCHEDULED MAINTENANCE CHECKS - with FAR Parts 43 and 91 consists MAINTENANCE PRACTICES of, but is not limited to, I inspection items listed in this NOTE Inspection Guide, any applicable Airworthiness Directives issued For a listing of alternative against the airframe or any inspection programs available for equipment installed therein, con- use with this airplane, refer to formity to Type Certificate Data the latest issue of the BEECHCRAFT Sheet and Maintenance Manual Publications Price List (P/N Airworthiness Limitations Chapter 118556). (Chapter 4) as applicable. The time periods for the inspections noted in this schedule are based on normal usage The owner or operator is primarily under average environmental conditions. responsible for maintaining the airplane Airplanes operated in humid tropics, or in an airworthy condition, including com- in cold, damp climates, etc., may need pliance with all applicable Airworthiness more frequent inspections for wear, cor- Directives as specified in Part 39 of the rosion, lubrication, and/or lack of main- Federal Aviation Regulations. It is fur- tenance. Under these adverse conditions, ther the responsibility of the owner or perform periodic inspections in compli- operator to ensure that the airplane is ance with this guide at more frequent inspected in conformity with the require- intervals until the owner or operator can ments of Parts 43 and 91 of the Federal set his own inspection periods based on Aviation Regulations. Beech Aircraft the contingencies of field experience. Corporation has prepared this inspection Airplanes operated less than 100 hours a guide to assist the owner or operator in year must have a 100-Hour Inspection per- meeting the foregoing responsibilities. formed no later than 12 months following This inspection guide is not intended to the date of the preceding 100-Hour be a11-inclusive, for no such guide can Inspection. The 100-hour interval between replace the good judgment of a certified performance of the procedures specified airframe and power plant mechanic in the herein should NEVERbe exceeded by more performance of his duties. As the one Ithan 10 hours, which can he used only if primarily responsible for the the additional time is required to reach airworthiness of the airplane, the owner a place where the inspection can be sat- or operator should select only qualified lisfactorily accomplished. However, any personnel to maintain the airplane. extension of a 100-hour interval must be subtracted from the following 100-hour While this guide may be used as an out- interval, with no time extension permit- line, detailed information of the many ted. For example, if an inspection is systems and components in the airplane done at 110 hours, the next inspection is will be found in the various due 90 hours later with no extension sections/chapters of the shop/maintenance allowed. manual and the pertinent vendor publica- tions. It is also recommended that refer- ence be made to the applicable Maintenance NOTE Handbooks, previously issued Service Instructions, Beechcraft Service Bulle- Ascertain that all placards are tins, applicable FAA Regulations and Pub- in-plate and legible whenever the lications, Vendors Bulletins and airplane has been repainted or Specifications for torque values, clear- touched up after repairs. Replace ances, settings, tolerances, and other - any placards that have been inad- requirements. It is the responsibility vertently defaced or removed. of the owner or operator to ensure that the airframe and power plant mechanic inspecting the airplane has access to the NOTE previously noted documents as well as to I Beech Aircraft's Recommended this inspection guide. Inspection Program in accordance 5-20-00 Page 201 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL Beech Aircraft Corporation issues service Service Bulletin to his particular set o information for the benefit of owners and operating conditions. operators in the form of two classes of Service Bulletins. MANDATORY (Red Border) In the final analysis it is the responsi Service Bulletins are changes, bility of the owner or operator to ensur inspections or modifications that could that all previously issued Class I and I affect safety. The factory considers Service Instructions and Beechcraft Ser compliance with these Service Bulletins vice Bulletins which are pertinent to hi mandatory. OPTIONAL(No Border) Service -particular operation are complied with. Bulletins cover changes, modifications, improvements or inspections which may NOTE benefit the owner. Due to the wide range of information covered by the OPTIONAL In addition to the inspections Service Bulletin, each owner or operator prescribed by this schedule, the is responsible for conducting a thorough altimeter instrument and static review of each Optional Service Bulletin system and all ATC transponders to determine if compliance is required MUST be tested and inspected at based on the applicability of the OPTIONAL 24-month intervals in compliance with the requirements specified in FARPart 91. 100-HOUR INSEECTION A. OPERATIONALINSPECTION MECH INSP L R 1. STARTERS - Check for proper operatton, unusual noises and dragging. Check starter energized light (if installed) and/or loadmeter to ensure starter disengage- ment when the starter switch is released. 2. CYLINDER HEADTEMPERATURE - Check for;proper operation, temperature and fluctuations. 3. ALTERNATOR- Check the output. 4. PROPELLEROPERATION- Cycle propeller and check for proper rpm drop and smoothness of operation. 5. PROPELLERSYNCHRONIZER- Check for proper operation. 6. PROPELLER DEICER - Check for proper operation and amperage drawn on ammeter. 5-20-00 Page 202 Nov 20/87 A1 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL A. OPERATIONALINSPECTION(Cont'd) MECH INSP L R 7. OIL PRESSURE AND TEMPERATURE - Check for proper pres- sure, temperature limits and unusual fluctuations. 8. MAGNETOS- Check the performance of the magneto by per- forming the MAGNETODROP-OFF CHECK specified in the applicable Pilot's Operating Handbook. 9. POWERCHECK - Check as outlined in the applicable Pilot's Operating Handbook. 10. ALL ENGINECONTROLS- With the engine running, check for proper operational limits, engine response and rigging. Check friction locks for proper operation. Check for proper lubrication of the connection bolts and excessive free play. 11. PROPELLER GOVERNORS- Check for proper governor opera- tion and feathering. 12. AIR CONDITIONER- Operate the air conditioner and verify that the air scoop moves to the ground position when turned on and returns to the retracted position when turned off. Check for proper operation and unusual noise. 13. FLIGHT INSTRUMENTS- Check for condition and proper operation. Check gages for proper reading. 14. GYRÐINSTRUMENTS - Check for erratic or noisy operation. 15. DEICER (Surface) - Check for proper operation and cycl- ing. | 5-20-00 Page 203 A18 Nov 20/87 BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL A. OPERATIONALINSPECTION (Cont'd) MECH INSP L R .. 16. IDLE RPM AND MIXTURESETTINGS - Check for both proper rpm and mixture settings. Check controls for freedom of operation. 17. IGNITION SWITCH- Rotate the ignition switch through the OFF position to the extreme limit of switch travel; if the engine stops firing, the switch is normal. If the engine continues to run with the switch held in the past OFF position, it is an indication that one magneto is still "hot" or ungrounded. When the switch is released from the past OFF position, it should automatically return to normal OFF and the engine should stop running. However, any ignition switch exhibiting this abnormal condition should be replaced. 18. HEATINGANDVENTILATINGSYSTEM- Cneck for proper opera- tion, heat and airflow output. Check controls for free- dom of operation. 19. PRESSURIZATIONSYSTEM- Check for proper 'operation. 20. FUEL QUANTITYANDFUEL FLOWGAGES - Check for proper operation and unusual fluctuations. 21. FUEL BOOSTPUMPS- Check for proper operation. 22. FUEL TANKSELECTOR- Check for proper operation and feel for positive detent and proper placarding. 23. ALL LIaWTS - Check for condition, attachment, cracked or broken lenses. Check switches, knobs and circuit break- ers for looseness and operation. 24. STALL WARNINGSYSTEM- Check for proper operation. 5-20-00 Page 204 Nov 20/87 A BEECHCRAFT DUKE 60 SERIES MAINTENANCE MANUAL A. OPERATIONALINSPECTION(Cont'd) MECH INSP L R 25. RADIO OPERATION - Check for proper operation, security of switches and knobs. 26. FLAPS - Check for noisy operation, full travel and prop- er indication. 27. PITOT HEAT- Check for proper heating of the unit. 28. BRAKES- Check for condition and wear, ease of operation and proper release of the parking brake. Check for unu- sual brake chatter. 29. EMERGENCYLOCATORTRANSMITTER- Check for proper opera- tion. Tune radio to 121.5 MHz on VHF or 243 MHz on UHF, then turn ELT switch to ON and monitor for one signal. Turn ELT switch OFF, then place in ARMposition. 30. OXYGENSYSTEM- Functionally check the oxygen system for proper operation. Check the oxygen bottle shutoff valve for proper operation. 31. SWITCHES, CIRCUIT BREAKERS- Check for proper operation. 32. FLIGHT CONTROLS, TRIM CONTROLSAND TRIM INDICATOR- Check freedom of movement and proper operation through full travel with and without flaps extended. Check electric trim controls for operation. 33. IDLE CUT-OFF - Check for proper operation and freedom of movement. 5-20-00 Page 205 A18. Nov 20/87

All Beechcraft 60 Duke maintenance manual