Skip to main content

BEECHCRAFT B36TC Model Guide

BEECHCRAFT B36TC · Model Guide

Free account — keep the POHs & checklists you reference in one place.

Overview

The BEECHCRAFT B36TC is a single-engine piston airplane in the Beechcraft 36 family, alongside the 36, A36, A36TC and G36. The supplied data has no B36TC-specific specs. Family-wide figures reach up to 1000 nm range, 195 kt cruise, 25000 ft ceiling and 6 passengers. Treat these as family maximums, not B36TC figures.

  • Family maximums only: up to 195 kt cruise, 1000 nm range and 6 passengers across the 36 family. Check the B36TC's own POH.
  • No B36TC-specific weights, V-speeds or seat counts were supplied. Get them from the airplane's flight manual and weight-and-balance records.
  • AD 99-05-13 (fuel tank selector) names the A36TC/B36TC series, and a later entry shows it withdrawn. Confirm current AD status.
  • A stretcher STC (SA00068WI) from Aviation Fabricators lists the B36TC as applicable. It adds 44.5 to 54.5 lbs depending on the litter.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at sprinkle.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Model Guide
Year
·
2026
File size
·
46 KB
Copy found at
·
sprinkle.com

Specifications & performance

Extracted from this document.

Specifications

Stretcher length (in)
·
72

Weight & balance

Ferno 12 1 litter (lb)
·
15
Ferno 1403 litter (lb)
·
25
Optional mattress (lb)
·
8.5
Stretcher with seat belts (lb)
·
21
About this document
What performance can I expect from a BEECHCRAFT B36TC?

The supplied data gives no figures for the BEECHCRAFT B36TC alone. The 36 family reaches up to 195 kt cruise, 1000 nm range and a 25000 ft ceiling. Confirm the B36TC's own numbers in its flight manual.

How many people can a BEECHCRAFT B36TC carry?

The data does not give a seat count for the BEECHCRAFT B36TC. The 36 family lists up to 6 passengers, and the maximum takeoff weight for the family is up to 2100 kg. Verify the B36TC's own limits in its documents.

Can a BEECHCRAFT B36TC take a medical stretcher?

Yes. The Aviation Fabricators STC SA00068WI lists the BEECHCRAFT B36TC as an applicable model. The stretcher mounts on the existing seat track and foot fittings. It adds 44.5 to 54.5 lbs and needs inspection at each 100-hour or annual inspection.

What is the BEECHCRAFT B36TC Model Guide?

The BEECHCRAFT B36TC Model Guide is a model guide for the BEECHCRAFT B36TC, dated 2026.

What year was the BEECHCRAFT B36TC Model Guide published?

The BEECHCRAFT B36TC Model Guide — the BEECHCRAFT B36TC model guide on file — is dated 2026.

How rare is it?
4,027BEECHCRAFT B36TC registered worldwide · 4,020 active

Common. More common than 99% of the aircraft models we track.

Documentation completeness
3/7

Most owners only have the POH. Here's the essential set for the BEECHCRAFT B36TC.

More BEECHCRAFT B36TCmanuals & documents

In this document

Airworthiness directives to review

The FAA list supplied is titled for the B35 Bonanza. It includes ADs that cover the 36 series: uplock rollers (2007-08-08, 72-22-01), engine fuel interruption (72-11-02), elevator control fittings (89-05-02) and window emergency egress (84-09-01). Only AD 99-05-13 names the B36TC explicitly. Confirm applicability by serial number and check the compliance records.

Stretcher STC installation

STC SA00068WI covers a stretcher that mounts to the existing seat track and foot fittings, and the B36TC is a listed model. The stretcher is 72 inches long. Inspect it at the 100-hour or annual inspection, checking upholstery, belts, foot fittings and frame for damage and corrosion. The ICA lists no airworthiness limitations for this installation.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Safety notes

  • Confirm each AD's applicability and compliance in the logbooks. The supplied list is a B35 page, and several entries name only the 36 or A36.
  • If a stretcher is installed, account for its 44.5 to 54.5 lbs in loading. Check the installation records.
  • Replace stretcher tubes with cracks of .125 inch or more, and replace cracked or broken fasteners immediately.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Full document text

BEECHCRAFT B36TC Model Guide The BEECHCRAFT B36TC is a single-engine piston airplane in the Beechcraft 36 family, alongside the 36, A36, A36TC and G36. The supplied data has no B36TC-specific specs. Family-wide figures reach up to 1000 nm range, 195 kt cruise, 25000 ft ceiling and 6 passengers. Treat these as family maximums, not B36TC figures. • Family maximums only: up to 195 kt cruise, 1000 nm range and 6 passengers across the 36 family. Check the B36TC's own POH. • No B36TC-specific weights, V-speeds or seat counts were supplied. Get them from the airplane's flight manual and weight-and-balance records. • AD 99-05-13 (fuel tank selector) names the A36TC/B36TC series, and a later entry shows it withdrawn. Confirm current AD status. • A stretcher STC (SA00068WI) from Aviation Fabricators lists the B36TC as applicable. It adds 44.5 to 54.5 lbs depending on the litter. Airworthiness directives to review The FAA list supplied is titled for the B35 Bonanza. It includes ADs that cover the 36 series: uplock rollers (2007-08-08, 72-22-01), engine fuel interruption (72-11-02), elevator control fittings (89-05-02) and window emergency egress (84-09-01). Only AD 99-05-13 names the B36TC explicitly. Confirm applicability by serial number and check the compliance records. Stretcher STC installation STC SA00068WI covers a stretcher that mounts to the existing seat track and foot fittings, and the B36TC is a listed model. The stretcher is 72 inches long. Inspect it at the 100-hour or annual inspection, checking upholstery, belts, foot fittings and frame for damage and corrosion. The ICA lists no airworthiness limitations for this installation. Safety notes: • Confirm each AD's applicability and compliance in the logbooks. The supplied list is a B35 page, and several entries name only the 36 or A36. • If a stretcher is installed, account for its 44.5 to 54.5 lbs in loading. Check the installation records. • Replace stretcher tubes with cracks of .125 inch or more, and replace cracked or broken fasteners immediately.