SERVICE BULLETIN OPTIONAL
Beechcraft G58 Baron · Service Bulletins
Overview
This Service Bulletin, issued by Raytheon Aircraft Company in March 2001, provides optional instructions for the removal of the battery drain mast assembly on specific Beech Baron models. It applies to various models including the Beech Baron 58 and others, detailing the conditions under which the mast assembly can be removed and the necessary steps to do so. The bulletin emphasizes that compliance is at the discretion of the owner/operator and outlines the materials and tools required for the task. It also includes safety precautions and instructions for ensuring the aircraft's systems remain operational during the process.
- This Service Bulletin is optional and compliance is at the owner's discretion.
- It applies to Beech Baron models 95-55, 95-A55, 95-B55, 95-C55, D55, E55, 58, 58P, and 58TC.
- Estimated man-hours for the task are 4 hours with 1 person suggested.
- The bulletin includes specific part numbers for materials needed, such as grommets and screws.
- Safety precautions are emphasized, including the need for protective gear when handling solvents and chemicals.
Document
Source
Originally published by www.csobeech.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type
- Service Bulletins
- Year
- 2001
- Pages
- 7
- File size
- 125 KB
- Publisher
- www.csobeech.com
Common. Rarer than 24% of the aircraft models we track.
Most owners only have the POH. Here's the essential set for the Beechcraft G58 Baron.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins
- Type Certificate (TCDS)
Beechcraft G58 Baron for sale now
Free — save the G58 Baron to your watchlist and track it in one place.
More Beechcraft G58 Baronmanuals & documents
See all 30 →- SkyView Autopilot Servo Installation & Maintenance ManualAvionics Manual
- Preliminary Report on the Serious Incident involving Beech Baron 58 aircraftOther Documents
- G5 Electronic Flight Instrument Installation Manual For Experimental/LSA AircraftSpecifications
- WINGS - INSPECT WING NACELLE KEELS FOR MISSING RIVETSParts Catalog
- Garmin G1000 Pilot’s Guide for the Beechcraft G58V Speeds Reference
- BARON G58Flight Manual
- HEATER INSTALLATION INSTRUCTIONS FOR HEATER KIT P/N CD50000K33Maintenance Manual
- PILOT’S OPERATING HANDBOOK AND FAA APPROVED AIRPLANE FLIGHT MANUAL SUPPLEMENT FOR BEECHCRAFT BARON 58, 58A, G58Pilot's Operating Handbook
- ABS/BPPP Guide to Initial Pilot Checkout: 58P/58TC Pressurized/Turbocharged BaronsTraining Manual
- SERVICE BULLETIN SB 28-4039, REV. 1Service Bulletins
- Beechcraft Baron 55/58 With 2.5” Attached TailpipeSystems Description
- SERVICE BULLETIN SB 21-3877Service Bulletins
If you fly the Beechcraft G58 Baron, you may also be researching these.
In this document
Planning Information
The bulletin specifies the airplanes affected, which include Beech Baron models 95-55, 95-A55, 95-B55, 95-C55, D55, E55, and 58, 58P, and 58TC, with specific serial numbers listed. It notes that compliance with the bulletin is optional for owners/operators.
Material Information
The bulletin lists materials required for the modification, including part numbers and quantities. It specifies that parts can be ordered through Raytheon Aircraft Authorized Service Centers.
Accomplishment Instructions
Detailed instructions are provided for removing the battery drain mast assembly, including safety warnings, steps for disconnection, removal, and installation of a replacement plate if necessary. The instructions emphasize the importance of cleanliness and safety during the process.
Safety notes
- Ensure all power is disconnected before starting work on the aircraft.
- Use appropriate safety gear when handling chemicals and solvents.
- Avoid working if the battery drain mast serves as an anchor for an ADF antenna.
Full document text
Issued: March, 2001 SB 53-3450 1 of 7 SERVICE BULLETIN OPTIONAL Exported under the authority of license exception: TSU. "These commodities, technology or software were exported from the United States in accordance with Export Administration Regulations. Diversion contrary to U.S. law prohibited." Raytheon Aircraft Company (RAC) issues Service Information for the benefit of owners and fixed base operators in the form of two classes of Service Bulletins. The first class, Mandatory Service Bulletins (red border) includes changes, inspections and modifications that could affect safety or crash worthiness. RAC also issues Service Bulletins with no red border which are designated as either recommended or optional in the compliance section within the bulletin. In the case of recommended Service Bulletins, RAC feels the changes, modifications, improvements or inspections will benefit the owner/operator and although highly recommended, Recommended Service Bulletins are not considered mandatory at the time of issuance. In the case of Optional Service Bulletins, compliance with the changes, modifications, improvements or inspections is at the owner/operator’s discretion. Both classes are mailed to: (a) RAC Authorized Service Centers. (b) Owners of record on the FAA Aircraft Registration Branch List and the RAC International Owner Notification/Registration Service List. (c) Those having a publications subscription. Information on Owner Notification Service or subscription can be obtained through any RAC Authorized Service Center. As Mandatory Service Bulletins and Service Bulletins are issued, temporary notification in the Service Bulletin Master Index should be made until the index is revised. Warranty will be allowed only when specifically defined in the Service Bulletin and in accordance with the RAC Warranty Policy. Unless otherwise designated, RAC Mandatory Service Bulletins, Service Bulletins and RAC Kits are approved for installation on RAC airplanes in original or RAC modified configurations only. RAC Mandatory Service Bulletins, Service Bulletins and Kits may not be compatible with airplanes modified by STC installations or modifications other than RAC approved kits. Beech 1. Planning Information A. Effectivity (1) Airplanes The following airplanes without a ADF (long-wire) antenna anchored to the battery drain mast assembly: Beech Baron Model 95-55, 95-A55, 95-B55, 95-C55, D55, and E55, Serials TC-1 through TC-2456, and TE-1 through TE-1201; Beech Baron Model 58, 58P, and 58TC, Serials TH-1 through TH-1960, TJ-3 through TJ-497, and TK-1 through TK-151. If you are no longer in possession of the airplane, please forward this information to the present owner. (2) Spares None. B. Reason This Service Bulletin is being issued to allow the removal of the P/N 95-410006-57 or P/N 002-400001-33 battery drain mast assembly provided no ADF (long-wire) antenna was anchored to the mast. This Service Bulletin allows the owner/operator the option of removing the mast assembly rather than replacing it in the event of any damage to the mast assembly. C. Description This service bulletin incorporates instructions for the removal of the P/N 95-410006-57 or P/N 002-400001- 33 battery drain mast assembly and fabrication and installation of a .032 aluminum plate, if required, and installation of a rubber grommet for the battery drain tube. TITLE: FUSELAGE - BATTERY DRAIN MAST REMOVAL SB 53-3450 2 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 D. Compliance Raytheon Aircraft Company considers compliance to be at the owner’s/operator’s option. E. Approval The engineering data contained in this Service Bulletin is FAA approved. F. Manpower The following information is for planning purposes only: Estimated man-hours: 4 hours. Suggested number of men: 1 man. The above is an estimate based on experienced, properly equipped personnel complying with this Service Bulletin. Occasionally, after work has started, conditions may be found which could result in additional man-hours. G. Weight and Balance None. H. Electrical Load Data Not changed. I. Software Accomplishment Summary Not applicable. J. References None. K. Publications Affected It is recommended that a note "See Service Bulletin No. 53-3450" be made in the following: Beech Baron, Model B55, E55, and 58, Illustrated Parts Catalog P/N 58-590000-19E7 or subsequent revisions; Beech Baron, Model 55, A55, B55, C55, D55, and E55, Illustrated Parts Catalog P/N 96-590010-13B2 or subsequent revisions; Beech Baron, Model 58P and 58TC, Illustrated Parts Catalog P/N 102-590000-7E3 or subsequent revisions. L. Interchangeability of Parts Not applicable. M. Warranty Credit Not applicable. SB 53-3450 3 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 2. Material Information A. Materials - Price and Availability Contact a Raytheon Aircraft Authorized Service Center for information. B. Industry Support Not applicable. C. Airplanes The following parts required for this modification may be ordered through a Raytheon Aircraft Authorized Service Center, RAPID or obtained locally: Raytheon Aircraft Company expressly reserves the right to supersede, cancel and/or declare obsolete, without prior notice, any parts or publications that may be referenced in this Service Bulletin. D. Spares Not applicable. E. Reidentified Parts None. F. Tooling - Price and Availability Not applicable. Part Number Description Quantity Per Airplane 1108-006 Grommet 1 AN525-10R7 or equivalent Screw 4 .032 2024-T3 Alclad Sht. Plate 1 MIL-C-5541 Alodine 1200, or equivalent Chemical Conversion Coating As Required A-A-1491, CCC-C40, or equivalent. Cotton Cheesecloth As Required MIL-P-23377 or equivalent Epoxy Polyamide Primer As Required Methyl Propyl Ketone As Required SB 53-3450 4 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 3. Accomplishment Instructions This Service Bulletin shall be accomplished as follows: NOTE Should any difficulty be encountered in accomplishing this Service Bulletin,
Show full textShow less
contact Raytheon Aircraft Company at 1-800-429-5372 or 316-676-3140. NOTE This Service Bulletin shall not be accomplished if the battery drain mast serves as the anchor for one end of any ADF (long-wire) antenna. A. Airplane Observe all Warnings and Cautions contained in the aircraft manuals referred to in this Service Bulletin. Whenever any part of this system is dismantled, adjusted, repaired or renewed, detailed investigation must be made on completion to make sure that distortion, tools, rags or any other loose articles or foreign matter that could impede the free movement and safe operation of the system are not present, and that the systems and installations in the work area are clean. (1) Remove all power from the airplane and disconnect the battery. Display warning notices prohibiting reconnection of airplane electrical power. (2) Remove the P/N 95-410006-57 or P/N 002-40001-33, mast assembly, by removing four AN525- 10R8 screws that attach the mast to the fuselage. See figure 1. (3) Inspect the hole in the fuselage that the drain tube protrudes through. If the hole is round and approximately 1.00 inch diameter, proceed to step 9. If the hole is oblong or out of round, go to step (4). See figure 1. (4) Fabricate a plate made from .032 2024-T3 Alclad aluminum. Form to match skin contour. See figure 2. SB 53-3450 5 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 Solvents, primers, and paints are flammable and toxic to skin, eyes, and respiratory tract. Skin and eye protection is required. Avoid repeated or prolonged contact. Keep away from flames or sources of heat. Use in well- ventilated area or respiratory protection equipment may be required. Chemical conversion coating may affect skin, eyes, and respiratory tract. Chemical goggles and neoprene gloves will be worn. Use in well-ventilated area. (5) Clean the fabricated plate with clean cotton cheesecloth or clean wiping rag dampened with appropriate solvent. Repeat solvent wipe cleaning, as necessary. Wipe surfaces dry with cotton cheesecloth. (6) Apply chemical conversion coating to bare metal surfaces per manufacturing instructions. Allow adequate drying time following application of chemical conversion coating. (7) Prime the fabricated plate with epoxy polyamide primer. Allow adequate drying time following application of primer and paint to match surrounding paint scheme. (8) Install the plate using four AN525-10R7 screws. See figure 1. Proceed to step 11. (9) Clean the area of the removed mast with cotton cheesecloth or clean wiping rag dampened with appropriate solvent. Repeat solvent wipe cleaning, as necessary. Wipe surfaces dry with clean cotton cheesecloth. Paint to match surrounding paint scheme. (10) Install four AN525-10R7 screws to fill open nutplate holes. (11) Install the battery drain hose through the center of the grommet. Install the P/N 1108-006 grommet into the 1.00 inch diameter hole. See figure 2. (12) Cut the drain hose to match figure 2. (13) Reconnect the airplane battery, remove warning notices and restore power. (14) Ensure all work areas are clean and clear of tools and miscellaneous items of equipment. (15) Return airplane to service. B. Spares Not applicable. C. Record of Compliance Upon completion of this Service Bulletin, make an appropriate maintenance record entry. SB 53-3450 6 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 B345001.AI A DETAIL A RBL 10.50 (REF) FS 16.25 (58) PLATE (IF REQD) SEE FIG. 2 1.00" DIA HOLE IN SKIN (MAY BE OBLONG ON EARLY AIRCRAFT) VIEW LOOKING AT FUSELAGE AFTER MAST ASSEMBLY HAS BEEN REMOVED FWD FS 18.75 (58) AN525-10R7 SCREW (OR EQUIV) 4 PLACES (DO NOT RE-USE ORIGINAL AN525-10R8 SCREWS. GRIP IS EXCESSIVE.) 002-400001-33 OR 95-410006-57 MAST ASSEMBLY BATTERY DRAIN MAST REMOVAL FIGURE 1 SB 53-3450 7 of 7 SERVICE BULLETIN OPTIONAL Issued: March, 2001 B345002.AI B DETAIL B RBL 10.50 (REF) FWD DRAIN TUBE DRAIN TUBE BATTERY BOX 1.00" 45 1108-006 GROMMET 1108-006 GROMMET INSTALL IN I.00" DIA HOLE 0.5" (TYP) 1.38" 0.69" 1.44" 0.31" R TYP 2.54" 1.00" DIA HOLE 0.193" 0.200" DIA HOLE 4 PLACES 0.5" (TYP) PLATE 0.032" 2024-T3 ALCLAD SHT BATTERY DRAIN MAST REMOVAL FIGURE 2


