KING AIR Medical Stretchers & Attendant Seats

Full document text

KING AIR Medical Stretchers & Attendant Seats KING AIR KING AIR Description: Our stretcher kit provides a King Air operator with the option of transporting an ill or injured non-critical patient. These stretchers are ideal for the operator who doesn't need critical care medical equipment. Kit includes stretcher unit and cover, Ferno model 12-C portable aero (folding) litter, mattress, mattress cover (conforms to FAR 23.853 horizontal flame test), restraint system, installation instructions, and weight and balance data, etc. Illustration shows Ferno model 12-1 aero litter with adjustable backrest. See more at http://avfab.com/king-air-100-200-300-350-90-stretcher Models: Beechcraft King Air 90, 100, 200, 300, 350, 350i FAA / STC: Covered by one or more of the following: SA2671CE, SA2672CE, SA2673CE, SA2674CE EASA: Various foreign approvals Features: Kit includes FAA approved mattress with removable cover. All materials conform to FAA flame testing standards. Installation: No airframe modification is required other than removing existing seats and furnishings from the desired location and setting the new stretcher assembly in the existing seat track (complete installation instructions, diagrams, and weight and balance data are included in the kit). In some King Airs, a table plug is recommended for aesthetic purposes. The stretcher can be installed on either side of the airplane in a range of stations. Lead Time: Stretchers are normally in stock and available for immediate world-wide shipment, however, fluctuations in demand may cause up to a 30 day delivery delay. Medical Stretchers KING AIR Installed King Air Medical Stretcher KING AIR Medical Stretcher Line Drawing KING AIR 4-Place Stretcher-Divan KING AIR Description: Increase the utility and functionality of your King Air with an AvFab 4 place Divan/Stretcher that allows you the option of carrying either passengers or a patient on the same divan. This conversion can easily be done with the divan/stretcher still in the aircraft. The Divan/Stretcher is approved for occupancy during all phases of flight (including takeoff and landing). See more at http://avfab.com/king-air-100-200-300-90-stretcher-divan-4-place-rh Models: Beechcraft King Air 90, 100, 200, 300, 350, 350i FAA / STC: Covered by one or more of the following: SA2630CE, SA2631CE, SA2632CE, SA2633CE Options: Under seat storage drawers. Shoulder harness kit (required for this installation). Features: Very quickly and easily converted between passenger carrying and for patient transportation. You can carry passengers on one leg of a flight and then convert it for an ambulatory person on the next leg. FAA approved for either use. Installation: No airframe modification is required to install the divan other than removing existing seat/s and furnishings, and locating the new divan in the desired location (complete installation instructions, diagrams, and weight and balance data are included in the kit). AvFab shoulder harness restraint system, part number 32-0181K, is required to install these divans. See shoulder harness data sheet for installation instructions. The divans can be installed on either side of the airplane in a range of stations. Lead Time: Typical lead time for these divan/stretchers is 14 days after receipt of purchase order. However, fluctuations in demand may cause up to a 30 day delivery delay Stretcher-Divans KING AIR Installed 4-Place Stretcher-Divan KING AIR 4-Place Stretcher-Divan KING AIR 4-Place Stretcher-Divan Line Drawing KING AIR 2-Place Divan Medical Attendant Seating KING AIR Description: Our 2-Place King Air Divan is also popular for medical attendant and Special Missions applications. In some cases you to accommodate additional passengers. Divans kits include: seat belts (TSO-C22f), track fittings, installation instructions, and weight and balance data, etc. Divan is delivered in "green" condition, without upholstery. AvFab's Two Place Lateral Tracking Divan is ideal for medical attendant use as it allows caregivers to adjust seat for closer access to patient while remaining in the restraint system. See more at http://avfab.com/king-air-100-200-300-350-90-2-place-divan or http://avfab.com/king-air-100-200-300-350-90-2-place-lateral-tracking-divan-lh Models: Beechcraft King Air 90, 100, 200, 300, 350, 350i FAA / STC: Covered by one or more of the following: SA2630CE, SA2631CE, SA2632CE, SA2633CE Options: Under seat storage drawers. Shoulder harness kit (required for this installation). Features: Divan kits include, seat belts (TSO-C22f), track fittings, installation instructions, and weight and balance data, etc. Installation: No airframe modification is required to install the divan other than removing existing seat/s and furnishings, and locating the new divan in the desired location (complete installation instructions, diagrams, and weight and balance data are included in the kit). AvFab shoulder harness restraint system, part number 32-0181K, is required to install these divans. See shoulder harness data sheet for installation instructions. The divans can be installed on either side of the airplane in a range of stations. Lead Time: Typical lead time for these divan/stretchers is 14 days after receipt of purchase order. However, fluctuations in demand may cause up to a 30 day delivery delay. Medical Attendant Seating KING AIR 2-Place Attendant Divan KING AIR Lateral Tracking 2-Place Attendant Divan KING AIR Lateral Tracking 2-Place Divan 2-Place Divan Medical Attendant Seating Line Drawings KING AIR Learn more about Avfab’s comprehensive line of King Air products & services at: www.AvFab.com Aviation Fabricators 805 North Forth Street Clinton, MO 64735 (660) 885-8317 www.AvFab.com