C177RG Checklist
Cessna 177RG Cardinal · Checklist
Overview
This document is a checklist specifically for the Cessna 177RG Cardinal, providing a comprehensive guide for pilots to follow during various phases of flight. It includes pre-flight, engine start, taxi, takeoff, landing, and shutdown procedures, ensuring that all critical checks are performed to maintain safety and operational efficiency. The checklist is designed to assist pilots in verifying that all necessary actions are completed before and during flight, promoting adherence to standard operating procedures. It is essential for both training and operational use, helping pilots to familiarize themselves with the aircraft's systems and requirements.
- Ensure all documentation is complete before entering the cockpit.
- Perform engine start checks including 'High Voltage' light and throttle settings.
- Verify all pre-takeoff settings including trims and fuel mixture.
- Conduct after takeoff checks to confirm gear and flap positions.
- Follow shutdown procedures to secure the aircraft properly.
Document
Source
Originally published by rafc.net.au. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Checklist
- Pages ·
- 2
- File size ·
- 31 KB
- Publisher ·
- rafc.net.au
What is the C177RG Checklist?
The C177RG Checklist is a checklist for the Cessna 177RG Cardinal.
How many pages is the C177RG Checklist?
The copy of the C177RG Checklist on file runs 2 pages.
Where does the C177RG Checklist come from?
This copy of the C177RG Checklist was originally published by rafc.net.au and is hosted on Sprinkle as a free, searchable reference copy.
Most owners only have the POH. Here's the essential set for the Cessna 177RG Cardinal.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
More Cessna 177RG Cardinalmanuals & documents
See all 17 →- Supplemental Type Certificate for Cessna 177RG CardinalSupplemental Type Certificate
- CESSNA STC SHOULDER HARNESS KITSSupplemental Type Certificate
- INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR HARTZELL PROPELLER HC-C2YR-1BFP / F7894 ON TEXTRON / CESSNA 177RG and F177RG AIRCRAFT STC SA04200CHFlight Manual
- Type Certificate Data Sheet No. A20CEWeight And Balance
- Report IN-031/2012Other Documents
- Tornado Alley Turbo, Inc. TAT SB11-07Service Bulletins
- Service Bulletin TAT SB09-02Flight Manual
- AAIB Bulletin No: 6/2005Service Bulletins
- AAIB Bulletin No: 10/2004Service Bulletins
- AVIATION OCCURRENCE REPORT LOSS OF ENGINE POWER / STALL CESSNA 177 RG CARDINAL C-GWNWOther Documents
- Cessna 1976 Cardinal RG Pilot's Operating HandbookPilot's Operating Handbook
- Cessna 177RG Owner's ManualWiring Diagram
In this document
Before Entering Cockpit
This section outlines the initial checks to be performed before entering the cockpit, including ensuring documentation is in order, fitness for flight, and authorization. It also includes checks for the gear handle position, avionics master switch, and external/internal inspections.
Engine Start
The engine start checklist details the steps required to start the engine safely. Key actions include turning on the master switch, checking the 'High Voltage' light, setting the throttle, and engaging the ignition. It emphasizes the importance of ensuring the area is clear before starting the engine.
Pre-Takeoff Vital Actions
This section lists critical actions to be taken before takeoff, including setting trims, mixture, propeller, and fuel settings. It also covers checks for instruments, switches, and circuit breakers, ensuring that the aircraft is fully prepared for departure.
After Take-Off Checks
After takeoff, pilots must confirm positive rate of climb, retract the landing gear, and ensure the flaps are up. This section also includes checks for engine performance and monitoring of altimeter settings.
Shutdown Checks
The shutdown checklist provides steps for safely shutting down the aircraft after landing. It includes setting the brakes, adjusting the throttle, turning off avionics, and ensuring all systems are secured before leaving the aircraft.
Safety notes
- Always ensure the area is clear before starting the engine.
- Monitor engine instruments closely during flight phases.
- Confirm that the landing gear is in the correct position before landing.
Full document text
Cessna 177RG Cessna 177RG CHECKLIST Cardinal C77R – VH-RRG • Before Entering Cockpit Brief Documentation Fitness Authorisation GEAR Handle DN Avionics Master - Off Master (Battery half only) – On ‘HIGH VOLTAGE’ light – On Gear Lights – test Warning Horn – test Stall Warn – test Master - Off Control Lock removed External/Internal Inspection Equipment Stowed Cargo Door – latched/locked • Power Off Seat - Adjusted Harness - secured Brakes – checked/set Instruments Circuit Breakers Switches – off Beacon – on Cowl Flaps – As required • Engine Start Master – On ‘High Voltage’ light – Out Turn Co-ordinator flag- away Fuel – Both Throttle – Open 1cm Propeller – High RPM #Auxiliary Fuel Pump – On #Mixture – Advance to 6gph Mixture – Idle Cut Off Auxiliary Fuel Pump – Off Clear all round “CLEAR PROP” Ignition – Both – then start Mixture – Advance Smoothly as Engine Starts to Taxi setting (#omit if engine is warm) • After Start Throttle - Set 1100 rpm Oil Press – up within 30 secs Suction – indicating Ammeter – charging High Voltage light – out Magnetos – check Mixture – Lean to taxi Cowl Flaps – set Avionics Master – On Fuel Scan 450-Step (or Auto) MFD – set QNH and scale Comms and Navaids– set Transponder – check GND or STBY (Nb. Transponder is Mode S & ADSB – it should transition modes automatically) ATIS – copied Flight Plan – Program & Selected & checked *Auto Pilot – On Electric Trim – Check *Auto pilot – system check then -OFF (* Auto pilot checks may be omitted if Autopilot remains OFF for the flight.) • Before Taxi Flaps – Clear, retract DG – aligned to Compass Clear all round • Taxi Checks Lookout Brakes - checked Nose wheel & Rudder check Flight Inst check in turns • Engine Runup Checks Oil Temp & Press – green range Clear all round – no loose stones Throttle – set 1800rpm Oil Press – green range Engine Instruments - check Magnetos: R,B,L,B RPM drop 125 max Difference <50rpm Propeller – Cycle x 2 Idle –650-850 oil press>redline Throttle – 1100 RPM • Pre-Takeoff Vital Actions PANEL SCAN then T Trims - set for Takeoff (elevator & rudder) Throttle friction – set M Mixture – Rich P Propeller – High RPM F Fuel – on Both & sufficient Aux pump - off Flaps checked & set 100 I Instruments set & checked S Switches set & checked Autopilot - OFF C Circuit Breakers – in Controls – Full, free & correct Cowl Flaps - Open H Hatches & Harnesses - secure • Line Up Checks EFATO - brief RWY, base & final - Clear DI & Mag Compass – error? Landing/Taxi Light – on Strobes – On Cessna 177RG Cessna 177RG • After Take-Off Checks Positive ROC – Brakes on, off GEAR Handle - Up 200’AGL Flaps – up GEAR UP LAMP – Amber Hyd Pump Light - Out Landing/Taxi Light – as required Transponder – ALT? Safe Altitude? – Cruise Climb: Throttle – set 25” Propeller set 2500 RPM Mixture – set 13 GPH CLEAROF (10 min checks) Compass – aligned Log – updated ETAs etc Engine – Ts & Ps, mixture Altimeter – QNH and level Radio – freq & broadcasts Orientation & Oxygen Fuel – tanks, contents Stalls (Aeros not permitted) H – Height A – Airframe S – Security E – Engine L – Location L - Lookout Descent Before Landing ATIS – copied Approach – Load Brief – self brief approach Clearance – for descent Checks: Mixture – gradually rich Cowl Flaps - Closed RPM – set for descent MAP – reduce slowly Ts&Ps - monitor Flap and Gear - extend for increased rate of descent (within IAS limits!) • Before Landing Checks Brakes – Pressure & off ‘Speed below 110’ (125 max) Undercarriage – GEAR DN Mixture – Rich Fuel – On & sufficient Hatches & Harnesses – secure Hyd Pump Light - Out GEAR DOWN LAMP – Green Mirror – check • Final Checks Propeller – High RPM Undercarriage – GREEN Flaps – set C-Cowl Flaps – Open -Clear RWY -Clear to land • After Landing Transponder – check mode has changed to GND or STBY Flaps – identified – up Trim – set for takeoff Landing/Taxi Light – off Strobes – Off Mixture – Lean to taxi • Shutdown Checks Brakes – set Throttle – 1100rpm Avionics Master– Off Lights – off Mixture – idle cut-off Ignition – Off (when engine stops) Master – Off Cowl Flaps – Set Fuel Left/Right or Both Documentation – complete • Securing Aircraft Parking – suitable position Control Lock – inserted Anti Theft Lock - -inserted Seats – adjusted Seat Belts – adjusted & stowed Transparency covers - fitted Fuel Tanks – dipped Pitot cover – installed Chocks – inserted (if required) Tie downs – connected Personal Equipment – removed Master – confirm off Doors – secured NOTE REFER TO FLIGHT MANUAL/POH FOR DETAILED INSTRUCTIONS Notes