Skip to main content

Gulfstream Aerospace G280 Model Guide

Gulfstream Aerospace G280 · Model Guide

Free account — keep the POHs & checklists you reference in one place.

Overview

The Gulfstream Aerospace G280 is a twin-engine turbofan jet. Registry data for the G280 family lists up to 3600 nm range, 459 kt cruise, a 47000 ft ceiling and up to 19 passengers. The one example described in the documents is a 9-passenger Elite cabin aircraft with Honeywell AS907-2-1G engines.

  • Structural limit: no aircraft may be operated beyond 10,000 flight cycles until fatigue testing is complete. The design goal is 20,000 flights.
  • Family-level maximums, not this variant's figures: up to 3600 nm range, 459 kt cruise, 47000 ft ceiling, 18000 kg MTOW, up to 19 passengers.
  • Sample serial 2059 had 1882.5 hours and 1353 landings at 4/17/2023. Its 96 Month inspection was done in March 2023 by Gulfstream Dallas.
  • Ask for AFM Revision 10 or later (9 May 2022) and proof that the required Service Bulletins are incorporated.

Summary written by AI from the source document. Check the original before relying on it. See which parts of Sprinkle are written by AI.

Reference only, not for flight. Use the current approved manual for your aircraft. See terms, section 5.

Document

Source

Copy found at sprinkle.com. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.

Report a problem or request removal

Document details

Type
·
Model Guide
Year
·
2026
File size
·
49 KB
Copy found at
·
sprinkle.com

Specifications & performance

Extracted from this document.

Performance

Family max range (nm)
·
3,600
Family max cruise speed (kt)
·
459
Family max service ceiling (ft)
·
47,000
About this document
What are the headline performance figures?

For the Gulfstream Aerospace G280 family, registry data shows up to 3600 nm range, 459 kt cruise and a 47000 ft service ceiling. These are family maximums, not figures for a specific aircraft.

Is there a flight cycle limit?

Yes. The Gulfstream Aerospace G280 is not authorized beyond 10,000 flights until fatigue testing is analyzed and approved. The design goal is 20,000 flights.

What should I check before buying?

For a Gulfstream Aerospace G280, check total time and landings, engine and APU program coverage, the latest major inspection, Service Bulletin compliance and a current AFM revision.

What is the Gulfstream Aerospace G280 Model Guide?

The Gulfstream Aerospace G280 Model Guide is a model guide for the Gulfstream Aerospace G280, dated 2026.

What year was the Gulfstream Aerospace G280 Model Guide published?

The Gulfstream Aerospace G280 Model Guide — the Gulfstream Aerospace G280 model guide on file — is dated 2026.

How rare is it?
383Gulfstream Aerospace G280 registered worldwide · 377 active

Common. More common than 90% of the aircraft models we track.

Documentation completeness
3/7

Most owners only have the POH. Here's the essential set for the Gulfstream Aerospace G280.

More Gulfstream Aerospace G280manuals & documents

In this document

Airworthiness limits and inspections

Structural inspections are counted in flights, not flight hours, with a +5% overfly tolerance. Many items have a 10,000 flight cycle initial inspection and a 5000 flight cycle repeat. Some start at 5000. The schedule assumes most cruise above 25,000 ft on flights longer than one hour.

Example aircraft: serial 2059

Engines are Honeywell AS907-2-1G, with the engines and the Honeywell GTCP36-150 APU on MSP Gold. Avionics are Rockwell Collins Proline Fusion PlaneView 3.6.1. Extras include HUD, EVS, SVS, FANS 1/A, SATCOM and thrust reverser Service Bulletin SB 280 78-30-004. The Elite cabin seats 9.

Manuals and approvals

The Airplane Flight Manual is FAA approved under Type Certificate Data Sheet A61NM. CAAI approved it on behalf of EASA. Revision 10 is dated 9 May 2022. This issue is for aircraft with Avionics Suite 3.6 (MOD G25-10032 or SB 280-31-106) and without MOD G25-10044 or SB 280-76-128.

Safety notes

  • Cracks found in any specified inspection must be reported immediately to Israel Aerospace Industries and Gulfstream Aerospace LP.
  • Confirm SB 280-57-036, SB 280-57-071, SB 280-30-017 and SB 280-76-111 are incorporated. The type certificate exemptions prohibit operation without them.
  • Air taxi, commuter, low-altitude or flights under 30 minutes fall outside the standard schedule. Gulfstream Customer Support must set a special inspection program.

Full document text

Gulfstream Aerospace G280 Model Guide The Gulfstream Aerospace G280 is a twin-engine turbofan jet. Registry data for the G280 family lists up to 3600 nm range, 459 kt cruise, a 47000 ft ceiling and up to 19 passengers. The one example described in the documents is a 9-passenger Elite cabin aircraft with Honeywell AS907-2-1G engines. • Structural limit: no aircraft may be operated beyond 10,000 flight cycles until fatigue testing is complete. The design goal is 20,000 flights. • Family-level maximums, not this variant's figures: up to 3600 nm range, 459 kt cruise, 47000 ft ceiling, 18000 kg MTOW, up to 19 passengers. • Sample serial 2059 had 1882.5 hours and 1353 landings at 4/17/2023. Its 96 Month inspection was done in March 2023 by Gulfstream Dallas. • Ask for AFM Revision 10 or later (9 May 2022) and proof that the required Service Bulletins are incorporated. Airworthiness limits and inspections Structural inspections are counted in flights, not flight hours, with a +5% overfly tolerance. Many items have a 10,000 flight cycle initial inspection and a 5000 flight cycle repeat. Some start at 5000. The schedule assumes most cruise above 25,000 ft on flights longer than one hour. Example aircraft: serial 2059 Engines are Honeywell AS907-2-1G, with the engines and the Honeywell GTCP36-150 APU on MSP Gold. Avionics are Rockwell Collins Proline Fusion PlaneView 3.6.1. Extras include HUD, EVS, SVS, FANS 1/A, SATCOM and thrust reverser Service Bulletin SB 280 78-30-004. The Elite cabin seats 9. Manuals and approvals The Airplane Flight Manual is FAA approved under Type Certificate Data Sheet A61NM. CAAI approved it on behalf of EASA. Revision 10 is dated 9 May 2022. This issue is for aircraft with Avionics Suite 3.6 (MOD G25-10032 or SB 280-31-106) and without MOD G25-10044 or SB 280-76-128. Safety notes: • Cracks found in any specified inspection must be reported immediately to Israel Aerospace Industries and Gulfstream Aerospace LP. • Confirm SB 280-57-036, SB 280-57-071, SB 280-30-017 and SB 280-76-111 are incorporated. The type certificate exemptions prohibit operation without them. • Air taxi, commuter, low-altitude or flights under 30 minutes fall outside the standard schedule. Gulfstream Customer Support must set a special inspection program.