Performance Data for the Mooney M18 Mite

STITS EPOXY PRIMER (GREEN) EP-420/EP-430 This green primer is fast drying, corrosion inhibiting, and has applica- tion and curing qualities down to 35°F. It is a heavy duty chemical and solvent resistant amine cured primer. Mixing ratio is 2 parts base, 1 part catalyst. Order in kits. Quart Kit (Yields2 1/2 quarts) Incl. catalyst and reducer ............................P/N 09-00352 Gallon Kit (Yields 2 1/2 Gallons) Incl. catalyst and reducer ............................P/N 09-00353 Base: Quart ....P/N 09-05605 Gallon ....P/N 09-05610 Catalyst: Pint ....P/N 09-05615 Quart ....P/N 09-05620 Reducer E-500 (Reduce 50%) Quart ....P/N 09-01163 Gallon ....P/N 09-01108 EPOXY ACCELERATOR EX-501 A chemical curing accelerator for use in EP-420 Epoxy Primer and EV-400 Epoxy Varnish according to directions on base component listing. Reduces polymerization time, not solvent evaporation. 1/2 Pint ...................................P/N 09-04650 POLY-TONE U.V. BLOCKING Used for additional UV Protection in ultralight airplanes. 1 fl.oz. blocks 1Quart Polytone 1/2 Pint Blocker (8 fluid oz) ...............P/N 09-02053 POLY-TONE REJUVENATOR RJ-1200 .......... Quart .........................P/N 09-05200 RJ-1200 .......... Gallon........................P/N 09-05300 POLY-BRUSH A pink translucent, 1 part air drying resin used for the first 2 or 3 coats to penetrate and seal the fabric weave and assure good adhesion. Also used to attach the finishing tapes and reinforc ing patches. Brush on initial coat thinned 3:1 with reducer. Subsequent coats are thinned 3:1 with reducer and applied with a spray gun to avoid brush marks & cut application time. Tinted Untinted Quart........P/N 09-04100 .......Quart P/N 09-04110 Gallon ......P/N 09-04200 ..... Gallon P/N 09-04210 5 Gal. .......P/N 09-04300 ....... 5 Gal P/N 09-04350 POLY-SPRAY A high-solids alumi num-pigmented, 1 part, air drying resin used after the Poly-Brush prelim i nary coating to protect fabric from UV and prepare for a smooth finish. Thin 4:1. Poly Spray (Qt.) ......................P/N 09-04400 Poly Spray (Gal.) ....................P/N 09-04500 Poly Spray (5 Gal.) .................P/N 09-04600 POLY-FIBER REDUCERS A blend of solvents used for viscosity and drying control of Poly-Brush, Poly-Spray and Poly-Tone. Blend #R-65-75 is recom mended as the standard reducer in normal weather, 65°–75°F. #RR-8500 is a retarder-reducer with slower drying time. Recom mended for temp above 85° & warm humid weather. #65-75 #RR-8500 Quart........P/N 09-04700 Quart ....... P/N 09-04750 Gallon ......P/N 09-04800 Gallon. ..... P/N 09-04850 5 Gal. .......P/N 09-04900 5 Gal. ...... P/N 09-04950 POLY-FIBER BLUSH RETARDER BR-8600 This blended solvent improves flow-out and prevents blushing under high temperature or high humidity condi- tions. Improves gloss. Important Notice: All mixed paints are special order and are non-returnable. BR-8600 (Qt.) .........................P/N 09-40830 BR-8600 (Gal.) .......................P/N 09-40840 POLY-TAK CEMENT Excellent cement for all types of fabrics. Shelf life unopened is 2 years. Pint..........................................P/N 09-05110 Quart .......................................P/N 09-05000 Gallon .....................................P/N 09-05100 POLY-TONE® FIN ISH A durable semi-gloss, 1-part, air drying flexible paint available in over 50 popular aircraft colors. Recom- mended as the standard finish for the Poly-Fiber cover process. Also may be used over suitably primed metal components of fabric covered aircraft. Fabric dam- age is more easily repaired when Poly-Tone finish is used. All pigments are non-bleeding or fading. Will not oxi dize with age. Poly-Tone is always thinned to 4 to 1with Poly Fiber Reducer (65-75 or 8500). POLY-TONE FINISHES 4 Whites: ....................................................QUART.................GALLON Insignia White (#105) Juneau White (#110) Glacier White (#117) Daytona White (#120) All other colors (Color Card #50) ........................................ No Charge STITS EPOXY VARNISH EV-400/EV-410 An excellent clear gloss epoxy varnish for interior and exterior use. It provides superior weather durability and excellent chemical and solvent resistance. Can be used over a one component varnish primer if desired. Mixing ratio is 2 parts base, 1 part catalyst. Can be ordered as a kit which includes base, catalyst and reducer, or each component separately. Quart Kit (Yields 2-1/2 quarts) Incl. catalyst and reducer ............................P/N 09-00349 Base: Quart ....P/N 09-05645 Gallon ....P/N 09-05650 Catalyst: Pint ....P/N 09-05655 Quart ....P/N 09-05660 Reducer E-500 (Reduce 50%) Quart ....P/N 09-01163 Gallon ....P/N 09-01108 POLY-FIBER AIRCRAFT COATINGS FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE TO ORDER POLYTONE: Create the part number for the Polytone you require: Color-PQ (for Quart) or Color-PG (for Gallon) Example: 100-PQ is 1 Quart of Color #100 IMPORTANT NOTICE: ALL mixed paints are special order and are non-returnable. POLY-TONE/AEROTHANE ENAMEL FLATTENER Used to make Aerothane and Enamel match the semi gloss finish of Polytone, or to make either Aerothane, Polytone and Enamel Full Military Flat. Use 1 Pint, to flatten 1 Quart P/N 09-02052 Use 1 Qt. & 1 Pint, to flatten 1 Gallon P/N 09-02051 FLAMMABLE 456 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. POLY-FIBER 60”X 48” FINE MESH PAINT STRAINER CONES Poly-Fiber 60x48 filter mesh paint strainer cone. P/N 09-02115 POLY FIBER AEROTHANE A tough, flexible, high-gloss two part polyurethane espe- cially formulated for fabric covered aircraft and marine surfaces subject to flexing loads. Recommended as a premium quality fabric finish over Stits Poly-Fiber covered aircraft. Wet look, high gloss. Aerothane requires catalyst, which is sold separately, and will be offered to you at the time of pur- chase. If you currently have an adequate supply please notify a sales rep or note it on your online order. Aerothane additives are also sold separately, but must be requested as needed. CLEAR 100................(Aerothane Only) WHITE 105................Insignia White (Eagle White) 110................Juneau White 117................Glacier White (Federal 17038) 120................Daytona White CREAM 132................Sun Valley Ivory 125................Tucson Cream 131................Diana Cream YELLOW 242................Ag Cat Yellow 136................Lemon Yellow 139................Federal Yellow 145................Lockhaven Yellow 240................Champion Yellow Titanine Yellow 140................Orange Yellow (Schweizer Yellow) (Thrush Yellow) (Orange Yellow) 143................Cub Yellow 146................J3 OEM Yellow ORANGE 142A .............Eagle Yellow (Orange) 182................Pumpkin Orange 183................International Orange 180................Cruiser Orange RED 189................Madrid Red 187................Eagle Red 191................Pontiac Red (Toreador Red) 190................Tennessee Red (Federal 11136) (Insignia Red) 195................Santa Fe Red (Maroon) 196................Boston Maroon RED (CONT’D) 197................Stinson Maroon PURPLE 361................Eagle Purple BROWN 205................Bermuda Tan 203................Elsinore Brown BLUE 165................Lakeland Blue 170................Bahama Blue 173................AN Blue (True Blue) (Federal 15102) 318M.............Piper Trainer Blue 177................Eagle Blue 176................Insignia Blue (Federal 15044 Blue) GREY/SILVER 210................Polar Grey 220M.............Nevada Silver 213A .............Federal 36321 Grey 213................Ag Cat Grey 219................Jasper Grey 222M.............Rancho Silver BLACK 215................Dakota Black (Eagle Black) MILITARY CAMOUFLAGE 212................Oak Green 208................Federal 14087 (Olive Drab) 208A .............Federal 24064 Green GREEN 157................Cuby Sport Trainer (Green) 151................Everglades Green 156................Portland Green 160................Forest Green 208................Federal Green GOLD 301M.............Reno Gold TO ORDER POLY-FIBER COLORS: Simply specify Poly-Fiber color number from chart above, either PolyTone or AeroThane, and quart or gallon. SILICONE HEAT SINK COMPOUND For more accurate thermal transfer during iron calibration. 1 oz. Syringe ...............................................P/N 09-37450 POLY-FIBER COLORS AVAILABLE Each color group in chart below is listed from light to darker shades. Free Poly-Fiber color chart available on request. Color Card #50. POLY-FIBER AIRCRAFT COATINGS TO ORDER AEROTHANE: Create the part number for the Aerothane you require: Color-A- Q(quart) or G (gallon). Add -K (kit) if catalyst is required. Example: 100-A-Q-K is 1 quart of color #100 with catalyst included. AERO-THANE (ALL PAINT 3/4 FILLED CANS) Size Color Part No. Price Quart Insignia White 105-AQ --- Gallon Insignia White 105-AG --- Quart Juneau White 110-AQ --- Gallon Juneau White 110-AG --- Quart Glacier White 117-AQ --- Gallon Glacier White 117-AG --- Quart Daytona White 120-AQ --- Gallon Daytona White 120-AG --- CLEAR AERO-THANE AO-100 (ALL PAINTS 3/4 FILLED CANS) Size Color Part No. Price 3/4 Quart Paint Clear AO-100-QT --- 3/4 Gallon Paint Clear AO-100-1G --- AERO-THANE ADDITIVES Description Size Part No. Price Urethane Catalyst U-865 1/2 Pint 09-05400 --- Urethane Catalyst U-865 Quart 09-05500 --- Urethane Reducer UE-820 Quart 09-05600 --- Urethane Reducer UE-820 Gallon 09-05700 --- Urethane Retarder UR-826 Quart 09-05800 --- Urethane Retarder UR-826 Gallon 09-05900 --- BLACK & DECKER THE CLASSIC IRON With a classic design and a wide range of convenient features, The Classic™ iron brings simplicity and style back to ironing. A SmarTemp™ indicator light ensures you’re ironing at the right temperature, while the 3-way auto shutoff provides added security and peace of mind. Heats up to 180° Features: • Wrinkle-Fighting Power • Aluminum Soleplate • Steam On/Off Button • Ironing Made Easy • 3-Way Auto Shutoff • Anti Drip • Fabric Guide Button Groove • Pivoting Cord ....................P/N 09-00980 IMPORTANT NOTICE: Poly-Fiber and Randolph Coatings are now manufactured by Consolidated Coatings Co. and current colors do NOT all match original Randolph colors. If matching an old color is required, please match it to a current color card or send in a sample of old color for custom matching. ALL mixed paints are special order and are non-returnable. AIRCRAFT FABRIC SEALING IRON 110V A digital thermostatic controlled sealing iron with easy to read LCD display. 110 Volt Sealing Iron P/N 09-04837 VISCOSITY CUP The Ford #4 viscosity cup is used for measuring the viscosity of paints and finishes to ensure a flawless finish ..........P/N 09-04776 CALIBRATION THERMOMETER Thermometer is accurate from 100°F to 400°F / 50°C to 200°C. Easy-to-read dial. Adjustable pan clip. Durable stainless steel. P/N 09-37475 FABRIC PRO DIGITAL COVERING FABRIC IRON This digital iron is uniquely designed for heat shrinking fabric onto vintage aircraft and ultralights with fantastic results. The digital temperature control maintains temperature precisely – set it and forget it – no more calibrating and continuous adjustments. The base plate is twice the thickness of an ordinary iron keeping the temperature uniform across the plate. And the shovel tip will get you in and out of the tightest corners – without a wrinkle .............P/N 09-05728 457 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. ENAMELS – REPAIR KITS POLY-FIBER MARK II FOR METAL (NOT FOR USE ON FABRIC) - Use Mark II for Metal is available in the same 50 colors as Poly-Fiber Poly-Tone and Randolph Colored Butyrate Dope. Mark II is used over primed metal or composite parts and is too brittle to be used over fabric. Mark II is a tough, long-lasting topcoat paint. Although Mark II is a two-part catalyzed paint, it is not catalyzed with an isocyanate, thus normal safety equipment (a charcoal filtered spray mask) is sufficient. You do not have to use a supplied air respirator when spraying Mark II. Packaging: Mark II comes in three-part kits: part one is a can of the colored paint; part two is a separate can with an equal volume of Mixing Liquid, and part three is a thinner to be used to prevent orange peel. POLY-FIBER REPAIR KIT Includes: 1 .......................................................... 1” Dope Brush 1 Pint .............................................................................Poly-Tak 1 Quart ...................................................................... Poly-Spray 1 Quart ...................................................................... Poly-Brush 1 Quart ................................... Reducer (Specify 65-75 or 8500) 1 Yard ..................................................................Medium Fabric 4 Sheets ........................................................... #400 Sandpaper 1...................................................................... 3” Curved Needle 10 Feet ..............................................................2” Surface Tape 1....................................................................................... Thread With #65-75 Reducer .....................P/N 09-06210 With #8500 Reducer.......................P/N 09-06215 CECONITE FABRIC REPAIR KIT Ceconite 101...............................P/N 09-00299........................--- Kit Includes: 1 1” Brush 1 quart 286 Nitrate Thinner 1 3”Curved Needle 1 quart Super Seam Fabric Cement 1 3M Wetordry Sandpaper 413 2 quarts 286 Butyrate Thinner 1 quart G-6302 Rand Nitrate Dope Grain 1 quart W-8350 Non-Taut Butyrate 1 yard Ceconite 101 (3.4) 70” 1 Yard Stits Hand Sewing Thread 1 quart Rand O- Fill G6303 5 Yards 2” C102 Straight Tape 2” Ceconite 101...............................P/N 09-06225........................--- Kit Includes: 1 1” Brush 1 quart Nitrate Thinner 1 3” Curved Needle 1 quart W-8350 Non-Taut Butyrate 1 yard Ceconite 102 (2.6oz) 2 quarts Butyrate Thinner 970 1 sheet 3M Wetordry Sandpaper 413 1 quart Rand-O-Fill G-6303 QT 1 quart Super Seam Fabric Cement 6 Yard C102 Straight Tape 2” 1 quart G-6302 N/T Nitrate Dope Grain 1 Ceconite Hand Thread 250 FLAMMABLE FLAMMABLE FLAMMABLE FABRIC COVERING TOOL KIT This kit includes the items most commonly need- ed to complete your Poly-Fiber covering project. Kit Includes: 4 - 1” Disposable Brushes, 3 - 2” Disposable Brushes, 4 - 2” opening 6” long Spring Clamps, 1 - CB-9 Pinking Shears, 10 - 1/2” Glue/ Acid Brushes, 1 - Black & Decker Classic Iron, 1 Hobbico Fabric iron 110V, 1 - Silicone heat sink compound, 1 - Thermometer, 1 - 12” Straight Needle, 1 - 12” Curved Tip Needle, 1 - 6” Curved Needle, 2 - Gallon Paint Saver Lids, 1 - V-plore 330 series mask only, 1 - X-plore P100 Combo cart pkg ......................................................... P/N 09-06230 POLY-FIBER MARK II MIXING LIQUID Mixing liquid is a combination of catalyst and thinner to be used only with Mark II for Metal paint. Included in Mark II kits above, but also available separately. See directions for mixing, thinning, and application above. Shelf life is two years in unopened package. Quart.....................................P/N 09-03695 Gallon ...................................P/N 09-03696 POLY-FIBER MARK II THINNER Used to thin Mark II for Metal paint after it has been combined with Mark II Mixing liquid. Included in Mark II kits above, but also available separately. thinning is gen- erally unnecessary when Mark II is sprayed. However, if orange peel results, you may use Mark II Thinner with 5 parts mixed Mark II paint. Shelf life is four years in unopened storage. Pint .......................................P/N 09-03697 Quart.....................................P/N 09-03698 Gallon ...................................P/N 09-03699 POLY FIBER COVERING KIT The Poly Fiber Covering Kit includes all of the materials generally required to recover a wide variety of small aircraft (see list below) except the fabric and topcoat. Poly-Fiber offers both Polytone and Aerothane topcoats in many colors. When you order this Covering Kit, you can also order the presewn fabric envelope or fabric yardage you will need to cover the aircraft. We are the best choice for your covering materials requirements. Count on Poly Fiber’s largest distributor...Aircraft Spruce! Note: This kit is for aircraft requiring about 45 yards of fabric. Quantity required vary by aircraft. Verify quantity shown are correct for your aircraft before ordering kit. ........P/N 09-02046 Color Quart Price Gallon Price Clear Base for Tinting 09-03869 --- 09-03871 --- Metallic Base for Tinting 09-03872 --- 09-03873 --- 105 Insignia White 09-03876 --- 09-03877 --- 110 Juneau White 09-03878 --- 09-03879 --- 117 Glacier White 09-03880 --- 09-03881 --- 120 Daytona White 09-03882 --- 09-03883 --- 125 Tucson Cream 09-03884 --- 09-03885 --- 131 Diana Cream 09-03886 --- 09-03887 --- 132 Sun Valley Ivory 09-03888 --- 09-03889 --- 136 Lemon Yellow 09-03890 --- 09-03891 --- 139 Federal Yellow 09-03892 --- 09-03893 --- 140 Orange Yellow 09-03894 --- 09-03895 --- 142A C. Eagle Yellow/Orange 09-03896 --- 09-03897 --- 143 Club Yellow 09-03898 --- 09-03899 --- 145 Lockhaven Yellow 09-03901 --- 09-03902 --- 146 J3 OEM Yellow 09-03903 --- 09-03904 --- 151 Everglades Green 09-03905 --- 09-03906 --- 156 Portland Green 09-03907 --- 09-03908 --- 157 Cuby Sport Trainer Green 09-03909 --- 09-03910 --- 160 Forest Green 09-03911 --- 09-03912 --- 165 Lakeland Blue 09-03913 --- 09-03914 --- 170 Bahama Blue 09-03915 --- 09-03916 --- 173 AN (True) Blue 09-03917 --- 09-03918 --- 176 Insignia Blue 09-03919 --- 09-03920 --- 177 Christen Eagle Blue 09-03921 --- 09-03922 --- 180 Cruiser Orange 09-03923 --- 09-03924 --- 182 Pumpkin Orange 09-03925 --- 09-03926 --- 183 International Orange 09-03927 --- 09-03928 --- 187 Christen Eagle Red 09-03929 --- 09-03930 --- 189 Madrid Red 09-03931 --- 09-03932 --- 190 Tennessee Red 09-03933 --- 09-03934 --- 191 Pontiac Red 09-03935 --- 09-03936 --- 195 Santa Fe Red 09-03937 --- 09-03938 --- 196 Boston Maroon 09-03939 --- 09-03940 --- 197 Stinson Maroon 09-03941 --- 09-03942 --- 203 Elsinore Brown 09-03943 --- 09-03944 --- 205 Bermuda Tan 09-03945 --- 09-03946 --- 208 Olive Drab 09-03947 --- 09-03948 --- 208A Federal Green 09-03949 --- 09-03950 --- 210 Polar Grey 09-03951 --- 09-03952 --- 212 Oak Green 09-03953 --- 09-03954 --- 213 AG Cat Grey 09-03955 --- 09-03956 --- 213A Federal Grey 09-03957 --- 09-03958 --- 215 Dakota Black 09-03959 --- 09-03960 --- 219 Jasper Grey 09-03961 --- 09-03962 --- 220M Nevada Silver 09-03963 --- 09-03964 --- 222M Rancho Silver 09-03965 --- 09-03966 --- 240 Champion Yellow 09-03967 --- 09-03968 --- 242 AG Cat Yellow 09-03969 --- 09-03970 --- 301M Reno Gold 09-03971 --- 09-03972 --- 318M Piper Trainer Blue 09-03973 --- 09-03974 --- 361 Christen Eagle Purple 09-03975 --- 09-03976 --- 458 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. Presewn envelopes are much easier to install than fabric yard goods. The envelopes are sewn to fit each individual surface depending upon the type of airplane. They can be placed on the surface like a sock. The envelopes are sewn using a special thread and special stitches. Fabric tapes must be placed over all seams. The seams can be sewn chordwise or spanwise for the wings. Individual Pieces Priced Per Each. On presewn envelopes, individual pricing is done by each piece. (i.e. If your airplane is a Stearman, you will have 4 wings. Price shown is per wing - $86.44. Your cost for all 4 would be: 86.44 x 4 =$345.76 PLEASE ORDER BY PART NUMBER - Basic part numbers (09-XXX) are shown in the chart. Complete the part number with 10 for wing, 20 for fuselage, 30 for aileron, 40 for stabilizer, 50 for elevator, 60 for flap, 70 for rudder, or 80 for complete set. After the P/N, add -1 for Heavy Duty 3.4 oz Polyfiber Fabric, -3 for Medium Weight 2.6 oz. Polyfiber Fabric, -5 for Ceconite 101 fabric, or -6 for Ceconite 102 Fabric. Prices of envelopes vary based on Fabric selected. Example: Complete part number for a Stinson 108-1 complete set in Ceconite 102 fabric would be 09-67380-6. Note: All pre-sewn envelopes are non-cancelable, non-returnable special orders items. 1 Does not include fabric for plywood wings - order separately. For individual wing envelope pricing, divide the number of wings on your aircraft into the wing price. A Tails Only B Plywood Or Metal Fuselage COMPLETE SETS Homebuilts Part # Price C Cassutt 111M 09-730 --- A Chipmunk 09-731 --- Corbin Jr. Ace 09-732 --- EAA Bipe 09-733 --- Fokker Tri-Plane 09-734 --- Meyer Toot 09-735 --- Pietenpol 09-736 --- Stampe SV4C 09-737 --- D Volksplane I 09-738 --- D Volksplane II 09-739 --- C Wittman Tailwind 09-740 --- Aircraft Part No. Wing (10) Fuselage (20) Aileron (30) Stabilizer (40) El e va tor (50) Flap (60) Rudder (70) Complete (80) Aeronca 7AC 2place 09-641 --- --- --- --- --- --- --- Aeronca 15AC 09-642 --- --- --- --- --- --- Beech D175/F17D/E17D 09-643 --- --- --- --- --- --- --- --- Beech D18/AT1/Twin 09-644 --- --- --- --- --- 1 Bellanca14-19/14-13 09-645 --- Bellanca Viking 09-646 --- --- --- --- --- --- --- Cessna 120/140/170 09-647 --- Christen Husky 09-648 --- --- --- --- --- Citabria 7, 8 09-649 --- --- --- --- --- --- --- --- Douglas DC-3 09-650 --- --- --- --- Ercoupe 09-651 --- --- Fairchild 24G/RW 09-652 --- --- --- --- --- --- --- Fairchild 19/23/26 09-653 --- --- --- --- --- --- Funk $266.95 Great Lakes 2T1 09-654 --- --- --- Howard DGA 09-655 --- Luscombe 09-656 --- --- Maule 4 09-657 --- --- --- --- --- Maule 5 09-658 --- Navy N3N 09-659 --- --- --- N. American AT6/SNJ 09-660 --- --- --- --- N. American P51 09-661 --- Piper J2/3, PA-18-95, 150 09-662 --- --- --- --- --- --- --- Piper J5/PA 12/14 09-663 --- --- --- --- --- --- Piper PA 15/17 09-664 --- --- --- --- --- --- --- Piper PA16 09-665 --- --- --- --- --- --- --- Piper Colt 09-666 --- --- --- --- --- --- --- Piper PA20/22 09-667 --- --- --- --- --- --- --- --- Ryan PT22/STA 09-702 --- --- --- --- --- --- Schweizer 119 09-668 --- --- --- --- --- Schweizer 126 09-669 --- --- --- --- --- --- --- Schweizer 222 09-670 --- --- --- --- --- --- --- Schweizer 233 09-671 --- --- Stearman PT13/17 09-672 --- --- --- --- --- --- --- Stinson 108-1, 2, 3 09-673 --- --- --- Stinson 10A/105/HW75 09-674 --- --- --- --- --- --- --- --- Stinson L5 09-675 --- --- --- --- --- --- --- --- Taylorcraft 09-676 --- --- --- --- --- --- --- Waco UPF7 09-677 --- --- --- --- --- --- J-3 Interior 09-678 --- Agricultural Aircraft Part No. Wing (10) Fuselage (20) Aileron (30) Stabilizer (40) El e va tor (50) Flap (60) Rudder (70) Complete (80) 1 Ag Cat 09-679 --- --- --- --- Airtractor 09-680 --- Callair A9/A9B 09-681 --- --- --- --- --- Piper PA25/Pawnee 09-682 --- --- --- --- --- --- --- --- Snow 09-683 --- --- --- --- --- --- --- --- Snow C/D 09-684 --- --- --- --- Thrush 09-685 --- --- --- --- 1 Weatherly 09-686 --- --- --- Homebuilts Part No. Wing (10) Fuselage (20) Aileron (30) Stabilizer (40) El e va tor (50) Flap (60) Rudder (70) Complete (80) Acro Sport I 09-687 --- --- --- --- --- --- --- Acro Sport II 09-688 --- --- --- --- --- --- --- Avid Flyer 09-689 --- --- --- --- --- --- Baby Great Lakes 09-690 --- --- --- --- --- --- Bowers Fly Baby 09-691 --- --- --- --- --- --- --- Christen Eagle 1 & 2 09-692 --- --- --- --- --- --- --- Corbin Baby Ace 09-693 --- --- --- --- --- --- Kitfox 09-694 --- --- --- --- --- --- Pitts S1S/S1C 09-695 --- --- --- --- --- --- --- Pitts S2S/S2A 09-696 --- --- --- --- --- --- --- Smith Miniplane 09-697 --- --- --- --- --- --- 1 Sonerai II 09-698 --- --- --- --- --- Starduster I 09-699 --- --- --- --- --- --- --- Starduster II 09-700 --- --- --- --- --- --- --- Steen SkyBolt 09-701 --- --- --- --- --- --- --- Antiques Part # Price Cessna Airmaster 09-705 --- B Mooney Mite 09-717 --- Cessna T50/UC78 09-706 --- A N. American B25 09-718 --- Commonwealth 09-707 --- Porterfield 35/70 09-719 --- B Culver Cadet 09-708 --- Rearwin Sportster 09-721 --- Antiques Part # Price Skyranger 09-722 --- A DeHavilland Heron 09-710 --- Stinson 10/10A/10S 09-723 --- Fleet 09-711 --- Stinson AT19/V77 09-724 --- Funk 09-712 --- Stinson SR5C 09-725 --- Model Part # Price B Grumman TBMS 09-713 --- Stinson SR9 09-726 --- B Meyer OTW 09-714 --- Taylorcraft 15 09-727 --- Monocoupe 09-715 --- D Travel Air 4000 09-728 --- A Mooney 20A 09-716 --- Piper PA-18 09-450 --- PRE-SEWN POLY-FIBER AND CECONITE ENVELOPES PRICES SHOWN ARE FOR CECONITE 102 ONLY 459 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. Model Part No. Price Star Flight Aircraft Hurricane, Avenger & Phantom Aircraft Complete Sail Set 09-01799 --- Wing Surface Set 09-01801 --- Aileron Surface Set 09-01802 --- Elevator Surface Set 09-01803 --- Horizontal Stabilizer Surface Set 09-01804 --- Upper Vertical Stabilizer 09-01805 --- Lower Vertical Stabilizer 09-01806 --- Rudder Surface 09-01807 --- Quicksilver Aircraft MX Complete Sail Set 09-01736 --- MX Wing Surface Set 09-01737 --- MX Qualifier Complete Sail Set 09-01738 --- MX Qualifier Wing Set 09-01739 --- MX Tapered Stabilizer Option 09-01763 --- MX Horizontal Stabilizer 09-01765 --- MX Rudder Surface 09-01768 --- MX-MXL Elevator Set 09-01764 --- MX2 Complete Sail Set 09-01740 --- MX2 Wing Surface Set 09-01741 --- MX2 H.P. Complete Sail Set (X-tra Ribs/Tapered Stabilizer) 09-01742 --- Quicksilver Weight Shift Rudder 09-01769 --- Quicksilver Weight Shift Complete Sail Set 09-01743 --- MXL Complete Sail Set 09-01744 --- MXL Wing Surface Set 09-01745 --- MXL Aileron Surface Set 09-01766 --- MXL Tapered Stabilizer 09-01767 --- MXL Sport 2 Complete Sail Set 09-01746 --- MXL Sport 2 Wing Sail Set 09-01747 --- MXL Super Sport Complete Sail Set 09-01748 --- MXL Super Sport Wing Sail Set 09-01749 --- Sprint Complete Sail Set 09-01751 --- Sprint Wing Sail Set 09-01752 --- Sprint 2 Sail Set 09-01755 --- Sprint 2 Wing Set 09-01760 --- GT 400 Complete Sail Set(Includes Pylon Cover) 09-01761 --- GT 500 Complete Sail Set 09-01790 --- GT 400 Wing Surface Set 09-01770 --- GT 500 Wing Surface Set 09-01771 --- GT 400/500 Wing Flap Set 09-01772 --- GT 400/500 Aileron Set 09-01773 --- GT 400 Pylon Fairing 09-01774 --- GT 400/500 Stabilizer/Elevator Set 09-01775 --- GT 400 Rudder 09-01776 --- GT 500 Rudder 09-01777 --- GT 400 Vertical Stabilizer 09-01778 --- GT 500 Vertical Stabilizer 09-01779 --- GT 500 Door Set (Left & Right) 09-01762 --- ULTRALIGHT SAILS Our sails are made in the United States by a top flight sail loft. These sails are made from the highest quality 3.9 oz. Dacron, many of them from the original OEM sail patterns. These sails are guaranteed to fit properly. All sail sets come complete with tail feathers and fuselage covers, except where noted. All sail orders are on custom-fabricated basis. Therefore, please allow an average of three weeks for delivery. There are no refunds on sail sets unless they are defective. Non-refundable 100% deposit or credit card purchase required. A wide selection of sail colors are available. Contact Aircraft Spruce for details on colors, patterns, and custom work. Prices subject to change without notice. FOR A COMPLETE LISTING OF ULTRALIGHT SAILS, COLOR CHARTS, AND DIAGRAMS, PLEASE VISIT www.aircraftspruce.com 460 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SUPER SEAM FABRIC CEMENT New Super Seam Fabric Cement. Not compatible with original nitrate-based Super Seam. Used to attach Ceconite Fabric to structures. High solids nitrate based cement approved in the Ceconite STC. 1 Qt.....................................P/N 09-18100 1Gal. ...................................P/N 09-18200 POLYESTER THREAD & CORD (FAA APPROVED) CECONITE - D693 waxed, 600 yds. P/N 09-41300-1 CECONITE - Flat Braided, 500 yds. P/N 09-00822 HAND SEWING THREADS - 250 yds. P/N 09-41400 MACHINE SEWING THREAD - 5600 yds ..P/N 09-41500 INTERIB BRACING TAPE - 36 yd roll, 1/2”w ..P/N 09-41560 CECONITE REINFORCING TAPES (FAA APPROVED) Polyester twill with adhesive back. Applied under riblac- er, server, or pop rivet to prevent fabric from ripping. 60 yd. length. 3/8” width (40 Yards) ..........P/N 09-41238-1 1/2” width (40 Yards) ..........P/N 09-41241-1 CECONITE – STAR GLOSS CECONITE FABRIC Ceconite, 100% polyester fabric is approved for use on most certified aircraft. To be sure to check the master eligibility list in the procedure manual. Visit our website for Data Sheet. CECONITE 101 Extra heavy-duty fabric recom- mended for the most severe operating conditions and very high-wing loading aircraft. 3.4 oz/sq yd. Thread Count: 144 X 57/in 70” Width ............ P/N 09-00700 /lin. yd CECONITE 102 Standard fabric is recommended for normal service and is widely used on all types of aircraft, regardless of wing loading or horsepower. 2.79 oz/sq yd. 73”X65” P/N 09-00900 /lin. yd UNCERTIFIED LIGHT - Light-weight fabric is recommended for covering plywood surfaces on any aircraft and any ultralight aircraft that is not certified. On certified aircraft, it is only approved for covering plywood surfaces. This fabric will be unstamped. 1.87 oz/sq yd. Thread Count – 90 x 76/in. 66” Width .............................. P/N 09-00921 /lin. yd CECONITE TAPES This FAA approved process utilizing Ceconite polyester fabrics and the Randolph line of finishes assures a beautiful, durable, weather-resistant cover job every time. The Ceconite cover process was issued Supplemental Type Certificate No. SA4503NM in 1997, and this number will apply to all aircraft. Note: Only Randolph materials may be used through the topcoat paint to comply with STC requirements. Randolph finishes are required for approval. Ceconite is approved for use on most certified aircraft. To be sure, check the Approved Model List in the latest revision of Procedure Manual 101 for the Ceconite Aircraft Covering Process. LINEAR STRAIGHT TAPES (CECONITE 102) Width Roll Part No. Price 1” .................... 50 yds. .................... 09-41010 1.5” .................. 50 yds. .................... 09-41015 2” .................... 50 yds. .................... 09-41020 3” .................... 50 yds. .................... 09-41030 4” .................... 50 yds. .................... 09-41040 6” .................... 50 yds. .................... 09-41060 LINEAR PINKED TAPES (CECONITE 102) 1” .................... 25 yds. .................... 09-41111 1.5” .................. 25 yds. .................... 09-41116 2” .................... 50 yds. .................... 09-41120 2” .................... 25 yds. .................... 09-41125 3” .................... 25 yds. .................... 09-41135 4” .................... 25 yds. .................... 09-41145 6” .................... 25 yds. .................... 09-41166 LINEAR PINKED TAPES (CECONITE LIGHT) 1” .................... 25 yds. .................... 09-41251 1.5” .................. 25 yds. .................... 09-41255 2” .................... 25 yds. .................... 09-00298 2” .................... 50 yds. .................... 09-41252 3” .................... 25 yds. .................... 09-41253 4” .................... 25 yds. .................... 09-41254 6” .................... 25 yds. .................... 09-41256 BIAS PINKED TAPES (CECONITE LIGHT) For use on curved edges. 2” .................... 25 yds. .................... 09-41165 3” .................... 25 yds. .................... 09-41170 4” .................... 25 yds. .................... 09-41175 FLAMMABLE STAR-TAK FABRIC CEMENT Star-Tak is a vinyl-based cement that is used to cement aircraft fabric to steel, aluminum, wood, or composite surfaces. It is also used to join fabric together in overlapped cemented seams. It dries to the touch in 15 to 20 minutes in normal temperatures. In two hours, it develops a bond strong enough to allow heat shrinking the fabric. Quart ..................................P/N 09-02583 Gallon .................................P/N 09-02584 STAR GLOSS GRAY SEALERS Gray Sealer is used to seal Ceconite fabric prior to spraying Silver Urethane Fabric Primer. This coat prevents pinholes in the Silver Urethane Fabric Primer. Gray Sealer is also used to apply Ceconite finishing tapes. It is tinted translucent gray to help see it when applied. Quart ..................................P/N 09-02577 Gallon .................................P/N 09-02578 5 Gallon ..............................P/N 09-02579 STAR GLOSS SEALER REDUCER Thinner for Gray Sealer. Mix three parts Gray Sealer to one part Sealer Reducer. Shelf Life: Four years, unopened in protective storage. Not affected by freezing. Quart ..................................P/N 09-02580 Gallon .................................P/N 09-02581 5 Gallon ..............................P/N 09-02582 STAR GLOSS SILVER URETHANE FABRIC PRIMER Silver Urethane Fabric Primer is a polyurethane product that serves two purposes: to build the coating over the fabric to prepare for paint, and to protect the fabric from UV radiation. Silver Primer uses a metallic-like flake additive. This proven system results in a positive metallic light block and reflection to both visible and invisible UV without relying on chemical UV light blockers. Quart ..................................P/N 09-02585 Gallon .................................P/N 09-02586 STAR GLOSS SILVER URETHANE FABRIC PRIMER CATALYST Silver Urethane Fabric Primer Catalyst is the only catalyst that can be used with Silver Urethane Fabric Primer. Note that unlike other catalysts it is mixed at a four to one ratio of primer to catalyst. 1/2 Pint ..............................P/N 09-02587 Quart .................................P/N 09-02588 STAR GLOSS SILVER URETHANE FABRIC PRIMER REDUCER A special blend of solvents specifically formulated for use with Ranthane and Star Gloss Silver Urethane Fabric Primer. Gallon ................................P/N 09-02374 STAR GLOSS AIRCRAFT COVERING PROCESS PROCEDURE MANUAL 114 pages of step-by-step instruction on how to cover your airplane with the Ceconite/Star Gloss system, helpful photos, great nostalgic cartoons, extra words of wisdom, and a delightful sense of humor. Includes catalog of products, everything from fabrics to top coat paint....................................P/N 09-02576 461 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. FABRIC – TAPES DACRON BIAS TAPE FOR HOMEBUILT AIRCRAFT Bias-cut tapes (weave 45° to edge) are especially useful for trimming compound curves on compo- nents such as wing tips and tail surfaces. Bias tape will stretch to conform to the contour without wrinkles, without heat-shrinking edges or cutting and notching to remove excess fabric. Stretching reduces the width about 35% so 3” tape should be used to finish areas normally covered with 2” tape. 2” Bias tape will pull to about 1-3/8” width. 2” x 50 Yd . Roll ..........................................P/N 09-16300 3” x 50 Yd. Roll............................................P/N 09-16400 NOT FOR USE ON CERTIFIED AIRCRAFT Material Quantity Part No. Price Dacron Machine Sewing Thread 500 Yds. 09-03900 --- Dacron Hand Sewing Thread 250 Yds. 09-04000 --- THREADS & CORDS Only synthetic threads and rib lacing cords should be used with Dacron covering to insure uniform strength. Waxed linen rib cord Conforms to PMA# TQ0075NM and STC# SA1008WE. CLOTH MASKING TAPE Has many uses in aircraft maintenance work. Strip over sharp corners under fabric. Strips on parts under doped fabric will prevent fabric from sticking to parts. Pressure- sensitive adhesive backing. Easily applied, easily removed. Leaves no residue. Should not be applied below 32°F. 1” x 60 yds...................................................P/N 09-17100 HEAVY-DUTY HEAT GUN This soft air velocity of this heat gun increases the sur- face temperature to the required working temperature much faster than conventional heat guns and maintains a higher temperature for faster completion of the appli- cation. Features double insulation, two temperature selections of 570°F and 1000°F, and a unique impact resistant heating element. Operates on 120V AC at 11.6 amps. Air volume 14.8 cu. ft. per minute. Wt. 1-1/2 lbs. ...............................................................P/N 09-00354 COTTON RE IN FORC ING TAPES .015” thick cotton tape used mostly for inter rib bracing during the covering process. 1/2” x 36 yds., and two rolls will generally take care of a set of standard size wings (ie – J3 Cub). P/N 09-17000 DACRON TAPE / PEEL PLY A layer of 2.7 oz. Dacron fabric strips or tape laminated into a layup as if it were an extra ply of glass. The peel coat wets out with epoxy like glass cloth and cures along with the rest of the layup. However, the Dacron does not adhere structurally to the glass and when peeled away it leaves a surface ready for glass-to-glass bonding without sanding. Requirements for Small Aircraft: For Experimental Aircraft. • 3 Rolls of 1” x 50 Yds. Tape • 2 Rolls of 2” x 50 Yds. Tape • 1 Roll of 3” x 50 Yds. Tape • 1 Roll of 4” x 50 Yds. Tape Discount Schedule for Dacron Tapes: Less 10% for 12 Rolls (assorted) • Less 15% for 25 Rolls (assorted). Request quote on larger quantities. Width Smooth Edge Pinked 50 Yd./ Roll Part No. Price/ Roll Part No. Price/ Roll 1” 09-15000 --- 09-15450 --- 2” 09-15100 --- 09-15500 --- 3” 09-15200 --- 09-15600 --- 4” 09-15300 --- 09-15700 --- 6” 09-15400 --- 09-15800 --- MAULE FABRIC TESTER A fine quality tool to test fabric covered aircraft for minimum FAA requirements without removing or punching holes in fabric. Also used to test struts for inside rusting as required by FAA on all Piper aircraft with struts.....................P/N 09-14900 SAIL FABRIC #1003 Glacier White Sail Fabric. 54” wide. 4.1 oz. Color may vary from sample shown. Sold by the yard. Note: This fabric is for ultralight sails, and will not shrink. Color Part No. Price 1003 Glacier White 15-04587 --- 192 Lime Green 15-04588 --- 196 Deep Purple 15-04589 --- 197 Red 15-04590 --- 201 Jet Black 15-04591 --- 232 Hot Pink 15-04592 --- 309 Emerald Green 15-04593 --- 310 Royal Blue 15-04595 --- 360 Key West Blue 15-04597 --- 566 West Coast Gold 15-04598 --- FLORIAN PINKER One continuous pinked edge while being comfort- able for either right or left hand use. Light and compact for easy use and easy storage. Gives that “professional look” to your own creations and easily pinks the most intri- cate patterns. Made in U.S.A ......................P/N 09-01400 PANASONIC IRON MULTI DIRECTIONAL 360 DEGREE New Concept 360° Quick Steam/Dry Iron with Curved Non-Stick Coated Titanium Soleplate, Multi- Directional Design with Added Steam Vents, 3-Way Auto Shut-Off, Adjustable Steam, Dial Temperature Control, “Stay Clean” Steam Vents and Anti-Drip System. Maximum Temperature 392F (200C). Controls: Choose Steam or Dry Operation: 4 Button Selector. Select “Extra” Jet-of-Steam: Left Pushbutton. Cool Water Spay or Mist: Right Pushbutton ........P/N 09-03785 FAB-TAC FABRIC CEMENT A superior quality cement for strong splice joints. Use to cement tapes, rings and grommets to fabric cover. This nitrocellulose type lacquer cement is used to cement aircraft synthetic and cotton fabrics, tapes, and grommets to fabric, cement aircraft fabric to plywood and metal in airplane construction and for attaching upholstery and soundproofing to cabin interiors. It is an excellent all-purpose cement for use on model airplanes. May be added to aircraft dope to improve adhesion to synthetic fabrics (one quart of FAB-TAC to a gallon of DOPE). This smooth flowing adhesive dries in 15 minutes to a tough film with a high tensile strength. May be coated over in 1 hour. Brush coating covers 110 square feet per gallon. 1 Pint ...........................................................P/N 09-17800 1 Quart ........................................................P/N 09-17900 1 Gallon .......................................................P/N 09-18000 FLAMMABLE FABRIC PRO DIGITAL COVERING FABRIC IRON • Fabric Pro Digital Iron - Perfomance and Precision • Lightweight and compact • Excellent on edges and corners • Easy to read digital temperature readout • Uniform heat plate creates a perfect finish. P/N 09-05728 MILWAUKEE M18 HEAT GUN Heat Connections Quickly. Anywhere, Anytime. 30% Faster Heat Up Than Corded Most Compact, Stand & Hang One Charge, 40+ Connections The M18 Compact Heat Gun performs applications quickly by reaching operational temperature in less than 7 seconds. As the most compact electric heat gun among market leaders, it can go places where corded heat guns can’t. The guarded nozzle provides increased protection for work surfaces and the ladder hook allows users to easily hang the tool between applications. Powered by Redlithium battery technology, it is able to heat over 40 connections on a single XC5.0 battery, anywhere, anytime without the hassle of cords. The M18 Compact Heat Gun features REDLINK PLUS™ Intelligence with a temperature management system to provide maximum life...................................... P/N 12-05676 462 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. INSTALLATION KITS All install kits ---. No clips are included. Order separately. *If clips are used to secure fabric on controls, add 50 ft. CESSNA-TYPE FABRIC CLIPS Individual spring steel clips used to attach fabric to metal ribs. Eliminates rib stitching. 5% Discount on purchase of 100 P/N 09-19900 NEEDLES – GROMMETS – PLATES RIB LACING & SEWING NEEDLES Needle Assortment includes 1 each of the following: 3” curved, 6” curved, 12” curved, 12” straight, 18” straight ..P/N 09-18735 Used to secure fabric to metal ribs in wings and control surfaces. Replaces rib-stitch cord or P-K screws. Provides a more secure and streamlined installation. Drastically reduces covering time. FAA-ap- proved for aircraft listed. Easily adapts to homebuilts with metal ribs. Spacing between clips, 3”. Spacing may be reduced to 1-1/2” on high- performance aircraft by using 2 wires, with clips inserted in alternate holes that are spaced 1-1/2” apart. Fabricated from stainless steel wire. Supplied in 25-ft. continuous coils. NOTE: FAA Approved for some aircraft. Please see our website for complete approval list. 25-Ft. Coil ....................................................P/N 09-19400 *Depressed center — LESS 15% ON QTY. OF 100 (per Part No.) Aircraft Model STC No. Part No. Feet Req’d. Aeronca-Champion SA150S0 09-19500 225 Piper — All Models SA126S0 09-19600 175-250 Stinson SA615S0 09-19700 175 Taylorcraft Original Equipment 09-19800 225 MARTIN FABRIC CLIPS Grommet Type Part No. O.D. I.D. Price each Flat AN231-1 1-1/4” 3/8” --- Flat AN231-2 3/4” 5/16” --- Grommet Type Part No. O.D. I.D. Price each Seaplane* AN231-4 1-1/8” — --- Aluminum 09-19110 3/4” 1/4” -- “T” HEAD PINS Used to hold fabric in place temporarily in covering operation. Plated steel, 1-1/2” L. 100 Pins. P/N 09-18850 RIB STITCH NEEDLES Made from the highest quality steel. Heat treated, nickel plated. BLIND RIVETS Use these 1/8” dia. “Pop” rivets to attach fabric to the ribs on Champion/Bellanca aircraft. 100 Rivets. P/N 09-18900 SCREWS Used on some aircraft models to attach fabric to metal wing ribs and empennage ribs instead of rib lacing. Truss-head, type “A” self-tapping sheet metal screws. Size #4 x 1/4”. Stainless Steel, Phillips Head .....................P/N T4X4/ea Stainless Steel Type A, Phillips...................P/N 4RX1/2SS/ea Stainless Steel Type A, Phillips...................P/N T4X6/ea AD-41H CLOSED-END BLIND POP RIVET 1/8” diameter. Used to seal tubing vent holes. P/N 04-01496/ea WASHERS Aluminum washers may be use in place of original plastic washers under screws and pop rivets to attach fabric to metal wing or empennage ribs. Plastic, 1/8” I.D. x 1/2” OD ..........................P/N 09-19000 Aluminum, 0.128” ID x 1/2” OD x 0.016 ......P/N 09-19100 DRAIN GROMMETS Manufactured from virgin cellulose ace tate butyrate resin. INSPECTION RINGS Clear plastic rings, 4-5/8” O.D. x 3-1/2” I.D. x .050” thick, molded from virgin cellulose acetate butyrate resin. To be cemented to fabric as inspection plate retainer. 20% Discount on 100 or more. P/N 09-19200 ea. INSPECTION PLATES DOMED - Concave aluminum snap-type plate has single clip rivet ed across full diameter. Snaps to the ring at 2 contact points. Plate is 4.75” dia. P/N 09-19300 ea./100 RECESSED - Recessed center and flanged-edge design will not creep off center due to vibration in propwash areas. 4-3/4” dia. x .020 alumi- num. Will not twist or vibrate .......................P/N 09-18740 ea. 3M™ FINE-LINE PAINT TAPE This 3M™ tape is particularly suitable for pin striping, multicolor and other custom painting applications. It is a thin, conformable green polypropylene film tape with a special finish that resists paint runoff. The adhesive adheres instantly and offers good holding power, resists lifting and curling. Stretchable and easy to handle. Provides an extremely fine color-line separa- tion for decorative painting of aircraft. Scotch No. 218. 1/8” x 60 Yds..................P/N 09-20200 1/4” x 60 Yds..................P/N 09-20300 1/2” x 60 Yds..................P/N 09-20400 3/4” x 60 Yds..................P/N 09-20500 • Less 10% on 6 Rolls (Assort ed) • Less 15% on 12 Rolls (Assorted) ACID OR GLUE BRUSHES Horse hair with metal handle. #1- 3/8” Wide .................P/N 09-21400 ea. #2- 1/2” Wide .................P/N 09-21500 ea. Brush Width Part Number Price Each Brush Width Part Number Price Each 1/2” 09-21100 --- 2-1/2” 09-38825 --- 1” 09-21200 --- 3” 09-38803 --- 2” 09-21300 --- 4” 09-38804 --- Discount: Less 10% on 50, 15% on 100 (per size) WOOD BRUSHES Natural, undyed bristle with smooth, unpainted wood handles. Unaffected by paint, dopes, thinners or solvents. DOLLAR PATCHES Grade B fabric patches for quick repairs on Grade B & Dacron covering. Smooth edge, 2.5” dia. Also avail- able in Dacron which are more durable & less notice- able on aircraft exterior. Less 10% For 12 or More. Dacron Dollar Patches ...P/N 09-17705/ea. Ceconite C101 ...............P/N 09-00162/ea. Ceconite C102 ...............P/N 09-00163/ea. PF P-103 Med. ...............P/N 09-18750/ea. P99 Heavy Duty .............P/N 09-00164/ea. Description Gauge Size Part Number Price 2-1/4” Curved 18 09-18300 --- 4” Straight 15 09-18400 --- 10” Straight 13 09-18500 --- 14” Straight 13 09-18600 --- 18” Straight 12 09-18700 --- Description Size Part Number Price 3” Curved Needle 3C 09-18705 --- 6” Curved Needle 6C 09-18710 --- 12” Curved Tip Needle 12C 09-18720 --- 12” Straight Needle 12 09-18725 --- 18” Curved Tip Needle 18C 09-18730 --- INSPECTION RING PATCHES Glued over inspection rings to prevent accidental removal. P/N 09-18750 ea. PIPER INSPECTION ACCESS HOLE KIT Piper inspection access hole kit 765-106 comes with hardware, 2 plates, and 2 backup ring assemblies. P/N 09-05779 463 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SOCOMORE SPECIALTY PAINTS ZINC CHROMATE PRIMER Socomore’s Zinc Chromate Primer is formulated to exceed the performance standards in the Federal Specification TT-P-1757. This primer promotes maximum adhesion to bare aluminum and steel and is recommended for that purpose. Socomore’s zinc chromate primer is a formulation proven to perform. Description Part No. Price Zinc Chromate Yellow Spray 13 oz. 09-00901 --- Zinc Chromate Yellow Qt. 09-00919 --- Zinc Chromate Yellow Gal. 09-00922 --- Zinc Chromate Yellow 5 Gal. 09-00952 --- Zinc Chromate Green Spray 13 oz. 09-00895 --- Zinc Chromate Green QT. 09-00917 --- Zinc Chromate Green Gal. 09-00918 --- 1022X66 Reducer Gal. 09-00954 --- ZINC OXIDE PRIMER - CHROMATE FREE Socomore’s Zinc Oxide Primer is formulated to exceed the performance standards in the Federal Specification TT-P-1757. Promotes maximum adhe- sion to bare aluminum and steel. Formulated to pro- vide a high performance primer that is considered a safer, more environmentally friendly, alternative to the zinc chromate primer. Description Part No. Price Zinc Oxide Green Spray 13 oz. 09-00904 --- Zinc Oxide Primer Green Qt. 09-00962 --- SOLVENTS, REMOVERS, & REDUCERS MEK is virgin (not recycled) MEK that may be used to clean and prepare the substrate for painting. MEK may also be used to clean brushes, paint guns and other painting tools. Socomore Acetone is virgin (not recycled) Acetone that may be used to remove lacquer finishes, for cleanup after painting, and to soften lacquers or acrylics that set up in spray guns or hoses. Acetone is not effective on urethanes and should not be used.- Toluene is virgin (not recycled) toluene that may be used as a reducer for enamels and other coatings in the alkyd family. Description Part No. Price Alkyd&Lacquer Thinner Gal. 09-00942 --- Mek Qt. 09-00972 --- Mek Gal. 09-00971 --- Toluene Qt. 09-00976 --- Toluene Gal. 09-00975 --- SOCOMORE COMPLETE SPECIALITY PAINT SYSTEM Note: Strong professional recommendation – These products have been specifically formulated to work together. Maximum adhesion, durability and performance is achieved when these products are applied as a system. To Purchase Your Specialty Paint System Simply tell us the make and model of your aircraft, and the Federal 595 Color – see chart on our website at: www.aircraftspruce.com Need a custom color that is not on the chart? – Ask us, we can help you with that too. ACID ETCH PRIMER Socomore’s Air Dry Wash Primer requires no sanding and is a polyvinyl butyral zinc chromate formulation that may be used to prime all plain or plated metallic surfaces. Priming surfaces with this primer will ensure maximum adhesion of all bake or air-dry finish coats (including lacquer finish coats). The finely ground emulsions of zinc chromate pigment, resins and phos- phoric acid hardeners are virtually non-settling. Description Part No. Price Yellow Acid Etch Primer Quart 09-00948 --- Yellow Acid Etch Primer Gallon 09-00946 --- Green Acid Etch Primer Quart 09-00949 --- Green Acid Etch Primer Gallon 09-00947 --- Reducer 1045 Gallon 09-00950 --- EPOXY PRIMER Socomore’s Epoxy Primer is a low VOC (volatile organ- ic compounds) epoxy polyamide solvent primer which conforms to the military specification MIL-P-23377 Rev. E. This coating is highly recommended for use on aluminum and all plated or unplated metallic surfaces to insure maximum protection against corrosion. This primer may be used as an interior or exterior primer that insures maximum adhesion of any paint or lacquer finish coats. NOTE: Before applying, refer to the technical data sheet for this product. *Must be shaken for 15 min. on a paint shaker. Description Part No. Price Yellow Gallon Kit 09-00932 --- Epoxy Thinner Quart 09-00937 --- Epoxy Thinner Gallon 09-00936 --- SOCOMORE CIRRUS COLORS FOR WING WALK COATING A non-slip coating used for walkways on exterior aircraft surfaces. Socomore Wing Walk is a rough texture non slip. The Wing Walk is a unique formula- tion of high molecular urethane resins, which cures at ambient temperatures. Size Color Part No. Price Pint Sterling 09-05240 --- Pint Clear 09-05248 --- ALL mixed paints are special order and are non-returnable. SOCOMORE WING WALK COATING Socomore Wing Walk Coating is a non-slip coating used for walkways on exterior aircraft surfaces. Socomore Wing Walk is a rough texture non slip. The Wing Walk is a unique formulation of high molecular urethane resins, which cures at ambient temperatures. This product is a high performance, two component polyurethane topcoat designed for exterior and interior use on high performance general aviation, business jet, and commercial aircraft. Size Color Finish Part No. Price Quart Black Semi-Gloss 09-04395 --- Flat 09-01230 --- SOCOMORE POLYURETHANE PAINT KIT This kit will provide all the materials needed to paint any RV or similar size aircraft. The kit consists of: • Green Acid Etch Primer & Reducer • Yellow Epoxy Prime, Catalyst, & Reducer • Polyurethane White topcoat, with catalyst & Reducer -Clear coat sold separately Additional colors are available upon request, for an additional cost. Paint KIT ......................................................P/N 09-02074 Clear Coat Kit ..............................................P/N 09-02073 SOCOMORE EPOXY TOPCOAT INTERIOR APPLICATION Two component catalyst cure epoxy polyamide which meets, and exceeds, MIL-PRF-22750E&F; Type 1. This system cures to an extremely hard, impervious film which resists yellowing and chalking. The Epoxy Topcoat provides the ultimate protection and gives a high quality finished appearance to metal, wood, and most other materials capable of being coated. Intended specifically for interior application to improve longevity and provide durability. This product is available in every color from the 595C Federal Color standard. Custom color matching available upon request. Insignia White Gloss (1 Gallon)...................P/N 09-17925 Juneau White Flat (1 Quart) ........................P/N 09-17886 1. Paint Strippers 2. Primers: Acid Etch And Epoxy 3. Topcoats: A Chemical Resistant Polyurethane With UV Protectors 4. Socomore Polykick™ to Accelerate Drytime 5. Cleaners 464 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SOCOMORE SPECIALTY PAINTS – SOLVENTS SPECIALITY PAINTS POLYURETHANE - ENAMELS - WATERBORNE POLYURETHANE/CATALYST CURE: Low VOC - Two component topcoat system with built-in U.V. protection. The system has both corrosion and chemical resistance properties with a gloss range > 95%. Comes in all Federal 595C colors. Custom colors available upon request. ENAMEL: Socomore’s Enamel is formulated to meet the performance specifications of Federal specification TT-E-489G. This product is a high quality alkyd enamel which performs best when used with Socomore’s zinc chromate or chromate free primer. It may be applied over wood or metal and is suitable for both interior and exterior applications. WATERBORNE POLYURETHANE: ZERO V.O.C. general purpose, exterior protective coating for metal surfaces. This product also works great for interior applications. The Waterborne Polyurethane should be applied over top of the Socomore Waterborne Epoxy Primer. Available in all Federal 595C colors; custom colors available upon request. Gloss Paints Base Part No. Poly.Qt. Price Poly.Gal. Price Enamel Gal. Price Waterborne Gal. Price Madrid Red 09-11120 --- --- --- --- Champion Yellow 09-13275 --- --- --- --- Glacier White 09-16492 --- --- --- --- Daytona White 09-16555 --- --- --- --- Insignia White 09-17925 --- --- --- --- HOW TO ORDER: Add the following dash numbers after the “Base Part No.” listed in the chart for the size and type desired. For Socomore Polyurethane: Qt. Size add -13 Gal. Size add -14 For Socomore Enamel: Qt. Size add -23 Gal. Size add -24 For Socomore Waterborne: Qt. Size add -33 Gal. Size add -34 The Socomore Polyurethane, Enamel, and Waterborne paints are also available in semi-gloss and flat. Please contact us for current price and availability. Socomore Touch-Up Paint Kits are available in polyurethane, enamel, waterborne, and interior epoxy pants. For more information, see www.aircraftspruce.com. Description Size Part Number Price Polyurethane Catalyst Gal 09-01256 --- Polyurethane Catalyst Qt 09-01964 --- Polyurethane Thinner Gallon 09-01658 --- ALL POLYURETHANE PAINTS REQUIRE CATALYST TO CURE! Always refer to Technical Data before use for mixing instructions and curing times. SOCOMORE COLOR CHART These samples are an approximate computer representation of the actual color and are to be used for reference only ........................P/N 09-01969 ............ FREE FABRIC REJUVENATORS A blend of deep cutting solvents which penetrates the dope finish and restores some of the original flexibility. Use on old fabric in fair condition. Do not use on weak or rotted fabric. Specify type of finish. Rejuvenator Type Certified Coatings Nitrate Rejuvenator Butyrate Rejuvenator Stits Poly-Fiber RJ-1200. Gallon ..........................................................P/N 09-22700 Gallon ..........................................................P/N 09-05300 ALL mixed paints are special order and are non-returnable. FLAMMABLE AIRCRAFT SPRUCE ACETONE Use to remove lacquer finishes, for cleanup after painting, and to soften lacquers or acrylics that have set up in spray guns or hoses. It has little effect on polyurethane which has cured in the lines.Use only virgin acetone as recovered acetone can damage virtually anything on which it is used. Pint ......................................P/N 01-01077 Quart ...................................P/N 01-01078 Gallon ..................................P/N 01-01079 NOTE: DO NOT MIX CERTIFIED DOPES & THINNERS WITH RANDOLPH AS THEY ARE NOT ALWAYS COMPATIBLE. STARTEX COATINGS Description Size Part No. Price TT-T266B Lacquer Thiner Gallon 09-03026 --- TT-T266B Lacquer Thiner 5 Gallons 09-03025 --- O-A-51 Acetone 1 Gallon 09-03028 --- O-A-51 Acetone 5 Gallons 09-03027 --- Toluene TT-T-548 1 Quart 09-03035 --- Toluene TT-T-548 5 Gallons 09-03033 --- Alcohol TT-I-735A 1 Quart 09-03042 --- Alcohol TT-I-735A 1 Gallon 09-03041 --- Alcohol TT-I-735A 5 Gallons 09-03039 --- Mineral Spirits P-D-680 5 Gallons 09-03044 --- Denatured Alcohol Gallon 09-03049 --- Denatured Alcohol 5 Gallons 09-03048 --- AERO ARPOSOLVE ALCOHOL Aero Arposolve A Isopropyl Alcohol 90% - 100%. Specifications: • Appearance: Liquid • Colour: Clear, Colorless • Odor: Alcohol-like, characteristic • Odor Threshold: 200 ppm • pH: No data available • Freezing Point (Melting point / freezing point): -88 °C (-126 °F) • Boiling Point: 82 - 83 °C (180 - 181 °F) / (1013 hPa) • Flash Point: 12 °C (54 °F) • Method: Tag closed cup • Evaporation Rate: < 3.9 / (Butyl Acetate = 1) • Flammability (solid, gas): No data available • Upper explosion limit: 13 %(V) • Lower explosion limit: 2 %(V) • Vapor Pressure: No data available • Relative vapor density: < 2.1 @ 15 - 20 °C (59 - 68 °F) • (Air = 1.0) • Relative density: 0.785 - 0.787 @ 20 °C (68 °F) / Reference substance: (water = 1) • Solubility(ies) Water solubility: completely miscible • Solubility in other solvents: No data available • Partition coefficient noctanol/ water: log Pow: 0.05 @ 25 °C (77 °F) • Auto-ignition temperature: 399 - 425 °C • Thermal decomposition: No data available Description Part Number Price 1 Quart 09-05731 --- 1 Gallon 09-05730 --- 5 Gallons 09-05732 --- 55 Gallon Drum 09-05766 --- 3 CHEM ZINC CHROMATE A tough, flexible, high-gloss two part polyurethane especially formulated for fabric covered aircraft and marine surfaces subject to flexing loads. Recommended as a premium quality fabric finish over Stits Poly-Fiber covered aircraft. Wet look, high gloss. Aerothane requires catalyst, which is sold sepa- rately, and will be offered to you at the time of purchase. If you currently have an adequate supply please notify a sales rep or note it on your online order. Aerothane additives are also sold separately, but must be requested as needed. Size Color Part No. Price Color Part No. Price 16 Oz Aerosol Yellow 09-06306 --- Green 09-06310 --- Quart Yellow 09-06308 --- Green 09-06312 --- 2 Quart Yellow --- --- Green 09-06322 --- Gallon Yellow 09-06309 --- Green 09-06313 --- 5 Gallon Yellow 09-06307 --- Green 09-06311 --- 3CHEM PROPELLER COATING AEROSOL - FLAT RHINO GRAY 3Chem Propeller Coating Aerosol - Flat Rhino Gray P/N 09-06277 465 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. RANDOLPH AIRCRAFT COATINGS J3000 BUTYSOLV REJUVENATOR Used to soften older dope coatings which exhibit cracking or ring-worming. Restores plasticizers in aged finishes to add flexibility. Only works on aircraft painted with butyrate dope; will not work on polyurethane topcoat finishes. Quart........................P/N 09-14505 Gallon ......................P/N 09-14510 5 Gallons .................P/N 09-14515 G-6303 RAND-O-FILL BUTYRATE (SILVER) Rand-O-FillG-6303 is a non-tautening butyrate material designed as the aluminum spray coat over Rand-OProof G-6302, over Nitrate Clear Dope or Butyrate clear Dope. Allow to dry. Wet sand to desired smoothness. Wash and allow surface to completely dry before applying following coat. Thin as needed with Butyrate Thinner. Quart........................P/N G-6303-QT Gallon ......................P/N 09-01018 5 Gallons .................P/N 09-01019 701 ALUMINUM PASTE A fine mesh paste which is easier to use than powder. Mix 4 oz. by weight of paste to one gallon of clear butyr- ate dope before thinning. 1 Lb. ...................................P/N 09-14500 210 NITRATE DOPE, TAUTENING, CLEAR, HI-SOLIDS Used only on Grade A cotton or Irish Linen. A premium high solids nitrate dope that tightens natural fabric as it dries. Not for use on Ceconite or heat-shrunk synthetic fabrics. Thin 1:1 w/286 Nitrate Thinner. Quart .......................P/N 210-QT Gallon .....................P/N 210-1G 5 Gallons ................P/N 210-5G W-7868 NITRATE DOPE, TINTED, NON-TAU T EN ING (BLUE) Initial coating for Ceconite or heat shrunk polyester fabric. Additional plasticizers slow shrinking after appli- cation. Thin 1:1 with 286 Nitrate Thinner. Quart .......................P/N W-7868-QT Gallon .....................P/N W-7868-1G 5 Gallons ................P/N W-7868-5G E-4964 NITRATE DOPE, CLEAR,NON-TAUTENING Initial coating for Ceconite or heat shrunk polyester fab- ric. For use on open cockpit aircraft where tinted dope is not desired. Thin 1:1 w/286 Nitrate Thinner. Quart .......................P/N E-4964-QT Gallon .....................P/N E-4964-1G 5 Gallons ................P/N E-4964-5G G-6302 RAND-O-PROOF NITRATE DOPE (GREEN) Special formulation of nitrate dope and additives for the initial coat on Ceconite fabric and for applying tapes. This is the recommended first coat in the Ceconite/ Randolph system. Thin 1:1 with 286 Nitrate Thinner. Quart .......................P/N G-6302-QT Gallon .....................P/N G-6302-1G 5 Gallons ................P/N 09-01017 286 NITRATE THINNER Used 1:1 to thin nitrate dopes & Rand-OProof. Quart .......................P/N 286-QT Gallon .....................P/N 286-1G 5 Gallons ................P/N 286-5G 9701 BUTYRATE DOPE, TAUTENING, CLEAR Used only on Grade A Cotton or Irish Linen to tighten the fabric as it dries. Not for use on Ceconite or heat-shrunk synthetic fabrics. Thin 1:1 with 9703 Butyrate Thinner. Quart .......................P/N 9701-QT Gallon .....................P/N 9701-1G 5 Gallons ................P/N 9701-5G W-8350 BUTYRATE DOPE TINTED, NON-TAUTENING (TAN) This non-taughtening butyrate dope features an increased level of plasticizer and will not tauten excessively. Takes longer to dry than standard buty- rates. Tinted. Used to apply finishing tapes. Additional plasticizers slow shrinking. TINTED LIGHT TAN BUT DRIES CLEAR. Recommended initial build butyr- ate coating to follow Rand-O-Proof in the Ceconite/ Randolph system. Thin 1:1 with 9703 Butyrate Thinner. Quart .......................P/N 09-00790 Gallon .....................P/N 09-00788 5 Gallons ................P/N 09-00789 • 45 yds. 70” Ceconite 102 • 5 gal. Nitrate Thinner • 5 gals. Rand-O-Proof • 10 gal. Rand-O-Fill • 10 gals. NT Butyrate • 30 gal. Butyrate Thinner • 3 gal. Universal Finishing Retarder • 10 gal. (White) Butyrate Dope • 13 rls. Pinked Ceconite Tape • 1 rl. Ceconite Rib Lacing Cord • 2 rls. 1/2” Reinforcing Tape • 100 Plastic Drain Grommets • 30 Inspection Rings • 1 gal. Rand-O-Bond TOTAL (Estimate) ......$ 3,500 MATERIAL REQUIREMENTS FOR AVERAGE SIZE AIRPLANE USING RANDOLPH FINISHES AND CECONITE FABRIC FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE 55 Gallon Drums - For 55 gallon drum of Randolph product, use basic P/N D55 - Example: 210-D55 Randolph coatings are the FAA-approved coatings for the Ceconite STC covering process. Do not mix Randolph Dopes & Thinners with Certified Coatings Products as they are not always compatible. 9703 BUTYRATE THINNER Used 1:1 to thin butyrate dopes & pigmented butyrate colors. Quart........................P/N 9703-QT Gallon ......................P/N 9703-1G 5 Gallons .................P/N 9703-5G Y-9910 UNIVERSAL RETARDER Prevents blush in nitrate and butyrate products. Also used to slow nitrate and butyrate drying in high tem- peratures. Quart............... P/N Y-9910-QT Gallon ............. P/N 09-01048 5 Gallons ........ P/N 09-01049 A-1690 BUTYRATE DOPE, NON-TAUTENING (CLEAR) For use as a build coat after E-4964 Non-Tautening Nitrate (Clear) on open cockpit aircraft where tinted dope is not desired. Thin 1:1 with 9703 Butyrate Thinner. Quart........................P/N 09-00817 Gallon ......................P/N 09-00818 5 Gallons .................P/N 09-00819 ................. .--- RANDOLPH FLOAT LACQUER This specialty product is used as a spray on the bottom of aluminum floats on amphibious aircraft to protect them from marine growth. Reduce with Randolph 286 Nitrate Thinner. Quart..................................................P/N 09-00830 Gallon ................................................P/N 09-00831 5 Gallons ...........................................P/N 09-00832 RANDOLPH ACID-PROOF BATTERY BOX BLACK PAINT #345 Battery Box Black Paint is an asphaltic coating used to provide protection from battery acid in battery boxes and compartments. It is generally applied with a brush or roller to any metal area that may be exposed to leaking battery acid. Shelf life: Guaranteed 2 years from date on manufac- ture in sealed container in protected storage. Coverage: 225 square feet per gallon with one coat. Mixing: Stir well before use.Thinning: Use out of the can. If thinning is necessary, thin five parts paint to one part 286 Nitrate Thinner. Application: Apply with a brush. Three coats will provide the best possible protection to epoxy primed metal surfaces. Quart............................................................P/N 344-QT ALL mixed paints are special order and are non-returnable. FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE 466 CM W P ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. RANDOLPH FINISHES Colors Butyrate Mark Ii Ranthane For Fabric Only For Metal Only Qts Gals Qts. Gals. Qts. Gals. Reds B-3534 Madrid Red --- --- --- --- --- --- B-9163 Colorado Red --- --- --- --- --- --- M-9522 Tennessee Red --- --- --- --- --- --- M-9530 Vermillion Red --- --- --- --- --- --- W-3665 Pontiac Red --- --- --- --- --- --- J-9555 Cadillac Red --- --- --- --- --- --- H-9150 Santa Fe Red --- --- --- --- --- --- X-5680 Boston Maroon* --- --- --- --- --- --- X-5749 Stinson Maroon --- --- --- --- --- --- Standard Colors M-9526 Cruiser Orange --- --- --- --- --- --- C-2065 Ocala Orange --- --- --- --- --- --- E-6427 Aeronca 7AC Yellow --- --- --- --- --- --- M-9512 Lemon Yellow --- --- --- --- --- --- M-9501 AN Orange Yellow --- --- --- --- --- --- F-6285 Cub J-3 Yellow --- --- --- --- --- --- M-9521 Lock Haven Yellow --- --- --- --- --- --- Y-5783 Dallas Yellow* --- --- --- --- --- --- D-9270 Ag Cat Yellow --- --- --- --- --- --- N-3353 Federal Yellow --- --- --- --- --- --- F-2406 Federal Green --- --- --- --- --- --- F-5830 Montego Green* --- --- --- --- --- --- Y-6350 Forest Green* --- --- --- --- --- --- W-3554 Lakeland Blue --- --- --- --- --- --- W-9506 AN True Blue --- --- --- --- --- --- H-9170 Bahama Blue --- --- --- --- --- --- X-5700 Miami Blue --- --- --- --- --- --- M-9502 Insignia Blue --- --- --- --- --- --- Z-7245 Sun Valley Ivory --- --- --- --- --- --- M-9518 Diana Cream --- --- --- --- --- --- X-5260 Tucson Cream* --- --- --- --- --- --- Q-1050 New Insignia White --- --- --- --- --- --- W-9170 Tropic White --- --- --- --- --- --- K-7641 Vestal White --- --- --- --- --- --- B-4243 Juneau White --- --- --- --- --- --- J-9545 Daytona White --- --- --- --- --- --- Q-1916 Randolph White --- --- --- --- --- --- F-7790 AG Cat Gray --- --- --- --- --- --- R-4870 Neutral Gray --- --- --- --- --- --- R-8174 Platinum Gray --- --- --- --- --- --- Y-6100 Polar Gray --- --- --- --- --- --- H-6117 Black --- --- --- --- --- --- R-8175 Sandalwood* --- --- --- --- --- --- Y-9775 Hickory Brown --- --- --- --- --- --- R-4869 Olive Drab* (Glossy) --- --- --- --- --- --- E-6428 Aeronca 7AC Orange --- --- --- --- --- --- P-8600 Cessna Tiger Orange --- --- --- --- --- --- Metallic Colors W-8427 Tampa Green* --- --- --- --- --- --- W-8430 Newport Blue* --- --- --- --- --- --- M-9514 Silver --- --- --- --- --- --- B-9916 Reno Gold --- --- --- --- --- --- RANDOLPH COLOR SELECTIONS AND PRICES How to Order:Use these dash #s to complete Randolph color part #s: Butyrate: Qts -BQ, Gallons -BG; Example: P-8599-BG Mark II: Qts -MQ, Gallons -MG; Example M-8599-MG Ranthane: Qts-RQ, Gallons-RG Example:B-3534-RG ALL mixed paints are special order and are non-returnable. Randolph Color Card...................................P/N 09-00 401 ........... FREE RANDOLPH COLOR PRODUCTS RANDOLPH COLORED NON-TAUTENING BUTYRATE DOPE - The final color coat applied over fabric in the Ceconite/Randolph system. Available in 50 standard colors. Thin one to one with 9703 Butyrate Thinner. One thinned gallon covers approximately 200 sq ft with one coat. RANTHANE POLYURETHANE FINISH Ranthane is a low viscosity, very high solids polyurethane material resulting in low film weight providing a lasting high gloss. Will withstand most chemicals, engine oils, and hydraulic fluids. Has superb adhesion and abrasion resis tance as well as high tempera ture resis- tance. For fabric and primed metal. RANTHANE HIGH SOLIDS CATALYST Pint ..............................................................P/N 09-00328 Use w/ High Solid Polyurethane Quart............................................................P/N 09-00400 RANTHANE ACCELERATOR Quart............................................................P/N D-7201-QT RANTHANE REDUCER Quart............................................................P/N G-4200-QT Gallon ..........................................................P/N G-4200-1G The FAA has approved the use of Ranthane over Poly-Fiber. To order Ranthane colors, please specify Randolph color from chart on right and specify quart or gallon. FLAMMABLE RANDOLPH ENAMEL THINNER Fast drying thinner for use with Randolph Aircraft Enamels and Fast Dry engine Enamels. Quart .....................................P/N 257-QT Gallon ....................................P/N 257-1G FLAMMABLE FAST-DRY ENGINE ENAMELS Formulated to be heat resistance and maintain good gloss and color retention. For use in the painting of engine crank cases and cylinders, after major overhaul or for general maintenance. Can also be used on engine mounts and supports. Service temperature is 300-350 degrees F. Reduction: Thin to correct spray viscosity with #257 Enamel Thinner(approximately 20% reduction). Application: Spray two coats. Allow to dry to the touch between coats. Color Quart Gallon Part No. Price Part No. Price 303 Black 303-QT --- 303-1G --- D-5973 Continental Gold D-5973-EQ --- D-5973-EG --- G-5436 Lycoming Gray G-5436-EQ --- G-5436-EG --- NOTE: Randolph paints are now manufactured by Consolidated Coatings and will not exact match old Randolph colors. If you are ordering to match old Randolph colors, please provide a paint sample that can be matched by the factory. MARK II FOR METAL (NOT FOR USE ON FABRIC) A tough, long-lasting, two-part topcoat paint catalyzed with a non- isocyanate catalyst. Supplied air respirator not required when spraying. Available in same 50 colors as Colored Butyrate Dope and Ranthane for use over primed metal or composite parts. Mix 1:1 with Mark II Mixing Liquid. Sold as kits. MARK II MIXING LIQUID - Combination of catalyst and thinner to be used with Mark II for Metal paint. Quart............................................................P/N 09-02193 Gallon ..........................................................P/N 09-02194 MARK II THINNER - Used as needed to thin Mark II for Metal after combining with Mark II Mixing Liquid to increase flow out. Pint ..............................................................P/N 09-02195 Quart............................................................P/N 09-02196 Gallon ..........................................................P/N 09-02197 RANDOLPH ENAMEL HARD GLOSS 9313 Special drier/ additive that modifies enamel into a stronger film that dries faster and creates an even, glossier surface. Adding 2 fluid ounces per thinned quart improves the gloss and removes the tendency for enamel to remain slightly tacky for long periods ............ P/N 09-01164 467 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SUPERFLITE FABRIC COVERING SUPERFLITE FABRIC COVERING Superflite manufactures everything you need to cover your airplane-fabric, tapes, accessories, glue, primer, and paint - and it’s all approved for use on certified aircraft. FABRIC Description Superflite No Part No Price Cert. 2.7 oz/sq yd - FAA Approved (72” wide) SF102-2.7 -CERT 09-03132 --- Cert. 3.7 oz/sq yd FAA Approved (72" wide) SF101 09-03133 --- Non Cert. 1.8 oz/sq yd (71" wide) SF104A 09-05364 --- SF102 SURFACE TAPES PINKED 102 Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF102-1P 09-03134 --- 1-1/2" x 50 yd SF102-15P 09-03135 --- 2" x 50 yd SF102-2P 09-03136 --- 3" x 50 yd SF102-3P 09-03137 --- 4" x 50 yd SF102-4P 09-03138 --- 6" x 50 yd SF102-6P 09-03139 --- STRAIGHT 102 Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF102-1S 09-03140 --- 1-1/2" x 50 yd SF102-15S 09-03141 --- 2" x 50 yd SF102-2S 09-03142 --- 3" x 50 yd SF102-3S 09-03143 --- 4" x 50 yd SF102-4S 09-03144 --- 6" x 50 yd SF102-6S 09-03145 --- PINKED BIAS CUT 102 Size/Unit Superflite Part No Part Number Price 2" x 25 yd SF10 2-2PB 09-03146 --- 3" x 25 yd SF102-3PB 09-03147 --- 4" x 25 yd SF102-4PB 09-03148 --- STRAIGHT BIAS CUT 102 Size/Unit Superflite Part No Part Number Price 2" x 25 yd SF102-2SB 09-03149 --- 3" x 25 yd SF102-3SB 09-03150 --- 4" x 25 yd SF102-4SB 09-03151 --- PRE SHRUNK TAPES 102 PINKED 102-HS Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF102-1P-HS 09-03152 --- 1-1/2" x 50 yd SF102-15P-HS 09-03153 --- 2" x 50 yd SF102-2P-HS 09-03154 --- 3" x 50 yd SF102-3P-HS 09-03155 --- 4" x 50 yd SF102-4P-HS 09-03156 --- 6" x 50 yd SF102-6P-HS 09-03157 --- STRAIGHT 102-HS Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF102-1S-HS 09-03158 --- 1-1/2" x 50 yd SF102-15S-HS 09-03159 --- 2" x 50 yd SF102-2S-HS 09-03160 --- 3" x 50 yd SF102-3S-HS 09-03161 --- 4" x 50 yd SF102-4S-HS 09-03162 --- 6" x 50 yd SF102-6S-HS 09-03163 --- SF104 SURFACE TAPES PINKED 104 Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF104-1P 09-03164 --- 1-1/2" x 50 yd SF104-15P 09-03165 --- 2” x 25 yd SF104-2P-25 09-05776 --- 2" x 50 yd SF104-2P 09-03166 --- 3" x 50 yd SF104-3P 09-03167 --- 4" x 50 yd SF104-4P 09-03168 --- 6" x 50 yd SF104-6P 09-03169 --- STRAIGHT 104 Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF104-1S 09-03170 --- 1-1/2" x 50 yd SF104-15S 09-03171 --- 2" x 50 yd SF104-2S 09-03172 --- 3" x 50 yd SF104-3S 09-03173 --- 4" x 50 yd SF104-4S 09-03174 --- 6" x 50 yd SF104-6S 09-03175 --- PINKED BIAS CUT 104 Size/Unit Superflite Part No Part Number Price 2" x 25 yd SF104-2PB 09-03176 --- 3" x 25 yd SF104-3PB 09-03177 --- 4" x 25 yd SF104-4PB 09-03178 --- STRAIGHT BIAS CUT 104 Size/Unit Superflite Part No Part Number Price 2" x 25 yd SF104-2SB 09-03179 --- 3" x 25 yd SF104-3SB 09-03180 --- 4" x 25 yd SF104-4SB 09-03181 --- PRE SHRUNK TAPES 104 PINKED 104-HS Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF104-1P-HS 09-03182 --- 1-1/2" x 50 yd SF104-15P-HS 09-03183 --- 2" x 50 yd SF104-2P-HS 09-03184 --- 3" x 50 yd SF104-3P-HS 09-03185 --- 4" x 50 yd SF104-4P-HS 09-03186 --- 6" x 50 yd SF104-6P-HS 09-03187 --- STRAIGHT 104-HS Size/Unit Superflite Part No Part Number Price 1" x 50 yd SF104-1S-HS 09-03188 --- 1-1/2" x 50 yd SF104-15S-HS 09-03189 --- 2" x 50 yd SF104-2S-HS 09-03190 --- 3" x 50 yd SF104-3S-HS 09-03191 --- 4" x 50 yd SF104-4S-HS 09-03192 --- 6" x 50 yd SF104-6S-HS 09-03193 --- ACCESSORIES ANTI-CHAFE & REINFORCEMENT TAPE Description Superflite No. Part No. Price 1/4" Sticky Back Tape SF-REINFTAPE-1/4 09-03196 --- 3/8" Sticky Back Tape SF-REINFTAPE-3/8 09-03197 --- 1/2" Sticky Back Tape SF-REINFTAPE-1/2 09-03198 --- 3/4" Sticky Back Tape SF-REINFTAPE-3/4 09-05363 --- 1" Sticky Back Tape SF-REINFTAPE-1 09-03199 --- RIB BRACING TAPE Description Superflite No. Part No. Price 1/4" Twill Inner Rib Brace Tape SF-TWILL-1/4 09-03194 --- 1/2" Twill Inner Rib Brace Tape SF-TWILL-1/2 09-17000 --- RIB LACING CORD Description Superflite No. Part No. Price Flat Rib Lacing Cord - 500 yd roll SF694-500 09-03201 --- SEWING THREAD Description Superflite No. Part No. Price Hand Sewing Thread - 250 yd SF-207 09-03202 --- Machine Sewing Thread - 1200 yd SF-69 09-03203 --- 468 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SUPERFLITE SYSTEM 7 PAINTS Superflite now has System 7, an all-urethane system, which is the most technologically advanced covering system in the world. System 7 has more durability, flexibility, and affordability than anything else on the market today. We’ve designed an aircraft covering system that’s geared toward the aircraft enthusiast – it’s easy to apply, easy to repair, and it provides you with a show-quality finish at a price that’s 20% less than the major competition. SYSTEM 7 FABRIC PRIMER Product Description Part No. Gallon Price Part No. Quart Price Part No. Pint Price Fabric Primer Base 01-01256 --- 01-01257 --- -- --- Fabric Primer Catalyst -- -- -- -- 01-01258 --- SYSTEM 7 URETHANE TOPCOAT Hardener for the Superflite urethane topcoats. Mixing ratio is 3 parts paint to 1 part catalyst, or 2 pints per gallon of paint and 1/2 a pint per quart of paint. Shelf life of 2 years unopened, 2 weeks if opened. Product Description Part No. Gallon Price Part No. Quart Price Part No. Pint Price Champ Yellow 09-03250 --- 09-03251 --- 09-04771 --- Diana Cream 09-03252 --- 09-03253 --- 09-04769 --- Lakeland Blue 09-03256 --- 09-03257 --- 09-04768 --- Juneau White 09-03258 --- 09-03259 --- 09-04773 --- Piper Cub Yellow 09-03260 --- 09-03261 --- 09-04772 --- Lemon Yellow 09-03262 --- 09-03263 --- 09-04770 --- Bahama Blue 09-03264 --- 09-03265 --- 09-05371 --- Pepsi Blue 09-03266 --- 09-03267 --- 09-05372 --- Polar Gray 09-03268 --- 09-03269 --- 09-05373 --- AN Orange Yellow 09-03270 --- 09-03271 --- 09-05374 --- Lockhaven Yellow 09-03272 --- 09-03273 --- 09-05375 --- Insignia Blue 09-03276 --- 09-03277 --- 09-05376 --- Intense Black 09-03278 --- 09-03279 --- 09-05377 --- Maule Yellow 09-03280 --- 09-03281 --- 09-05378 --- Ocala Orange 09-03282 --- 09-03283 --- 09-05379 --- Lime Green 09-03284 --- 09-03285 --- 09-05380 --- Sacramento Green 09-03286 --- 09-03287 --- 09-05381 --- Spitfire Red (Metallic) 09-03288 --- 09-03289 --- 09-05382 --- Champ Orange 09-03290 --- 09-03291 --- 09-05383 --- Cessna Tiger Orange 09-03292 --- 09-03293 --- 09-05384 --- Insignia White 09-03296 --- 09-03297 --- 09-05385 --- Starlight Blue 09-03298 --- 09-03299 --- 09-05386 --- Oracle Red 09-03301 --- 09-03302 --- 09-05387 --- Cessna Sunset Red 09-03303 --- 09-03304 --- 09-05388 --- Matterhorn White 09-03305 --- 09-03306 --- 09-05389 --- Daytona White 09-03307 --- 09-03308 --- 09-05390 --- Spruce Metallic (Metallic) 09-03309 --- 09-03310 --- 09-05391 --- Cruiser Orange 09-03311 --- 09-03312 --- 09-05392 --- Insignia Red 09-03313 --- 09-03314 --- 09-05393 --- Cessna Vestal White 09-03315 --- 09-03316 --- 09-05394 --- Sun Valley Ivory 09-03317 --- 09-03318 --- 09-05395 --- Inca Gold (Metallic) 09-03319 --- 09-03320 --- 09-05396 --- Cadillac Red 09-03321 --- 09-03322 --- 09-05397 --- Matador Red 09-03323 --- 09-03324 --- 09-05398 --- Sandalwood 09-03325 --- 09-03326 --- 09-05399 --- Aztec Silver (Metallic) 09-03329 --- 09-03330 --- 09-05401 --- Stinson Maroon 09-03331 --- 09-03332 --- 09-05402 --- Fed-Ex Purple 09-03333 --- 09-03334 --- 09-05403 --- Hickory Brown 09-03337 --- 09-03338 --- 09-05404 --- Silverado Silver (Metallic) 09-03339 --- 09-03340 --- 09-05405 --- Olive Drab 09-05406 --- 09-05407 --- 09-05408 --- Meadow Green 09-05409 --- 09-05410 --- 09-05411 --- Medium Gray 09-05412 --- 09-05413 --- 09-05414 --- Atlas Gray Metallic 09-05415 --- 09-05416 --- 09-05417 --- Royal Blue 09-05418 --- 09-05419 --- 09-05420 --- Product Description Part No. Price Cool Temperature Reducer: 60-70º 01-01250 --- Medium Temperature Reducer: 70-80º 01-01251 --- Warm Temperature Reducer: 75-85º 01-01252 --- Hot Temperature Reducer: 85º and up 01-01253 --- SYSTEM 7 URETHANE REDUCERS Product Description Part No. Price Urethane Paint Catalyst - 1 Quart 09-05596-1 --- SYSTEM 7 TOPCOAT CATALYST 469 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. SEM INTERIOR REPAIR PRODUCTS AEROSPACE SEM SOAP First step cleaner gravitates into the substrate and floats contaminants to the surface. AEROSPACE SEM SOAP can be used on all substrates. Use AEROSPACE SEM SOAP to clean vinyl and leather seat covers prior to restoring with AEROSPACE SURE-COAT™ or AEROSPACE COLOR COAT. P/N 09-03588 SEM AEROSPACE PLASTIC & LEATHER PREP Leaves plastic substrates clean for coating, will not soften or distort plastic; removes contaminants such as mold, release agents, fingerprints and grease. Aerospace Plastic & Leather Prep can be used on all plastics and leather. 12 oz. Aerosol. P/N 09-03587 SEM LOW VOC RUBBERIZED UNDERCOATING 40523 SEM Low Voc Rubberized Undercoating is a paintable, fast-drying, asphalt free coating for rust proofing, sound deadening, chip resistance and corrosion protection. Less than 40% VOC. 24 oz Aerosol ................P/N 09-03581 SEM TRIM BLACK SEM Trim Black 39143 is the industry standard for restoring faded and peeling exterior trim parts. This paint coating offers maximum adhesion on stainless steel and chrome. 15 oz. Aerosol .................................P/N 09-03579 SEM SOLVE 38373 SEM SOLVE removes adhesives, wax, road tar, grease and paint overspray. 20 oz. Aerosol ......................................P/N 09-03577 SEM SAND FREE 38363 SEM SAND FREE softens the substrate promoting adhesion on difficult to sand areas. 16 oz. Aerosol ........................P/N 09-03576 SEM VINYL PREP SEM Vinyl Prep 38343 cleans soil, wax and grease from vinyl substrates while it softens and prepares the surface for adhesion of topcoat. Great for use with SEM flexible coatings. 16 oz. Aerosol ..............P/N 09-03575 SEM SCUFF & CLEAN 38338 SEM SCUFF & CLEAN prepares bumpers or panels when refinishing or blending. It’s abrasive action improves adhesion of repair and refinishing materials. Pint ..................................................P/N 09-03574 SEM AEROSPACE SURE-COAT FLATTENER Restores aircraft interior leathers, vinyl and plastics at a fraction of the cost of replacement.Cleans, repairs, and restores interiors to a like new condition without changing the aircraft’s burn certification ......................................P/N 09-03586 SEM COLOR COAT SEM COLOR COAT is formulated to match, restore or change color on most vinyl surfaces, flexible and rigid plastics, carpet and velour. Fade resistant and flexible, COLOR COAT is not a dye, but a permanent paint coating. 12 oz. aerosol. Color Part No. Price 15453 Gloss White 09-05694 --- 15003 Phanton White 09-03556 --- 15013 Landau Black 09-03557 --- 15043 Shadow Blue 09-03558 --- 15103 Super White 09-03559 --- 15143 Sandstone 09-03561 --- 15163 Presidio 09-03562 --- 15173 Camel 09-03563 --- 15183 Warm Gray 09-03564 --- 15233 Gloss Black 09-03566 --- 15243 Satin Black 09-03567 --- 15283 Pescadero Sand 09-03568 --- 15303 Graphite 09-03569 --- 15393 Medium Gray 09-03571 --- 15603 Sailcloth White 09-03572 --- 15763 Storm Gray 09-03573 --- SEM CLASSIC COAT SEM CLASSIC COAT uses advanced technology to provide superior adhesion and flexibility when changing or restoring the color of most leather and vinyl. CLASSIC COAT is a fade resistant coating that won’t chip or peel and is available in many of today’s popular OEM colors. 12 oz. Color Part No. Price 17013 Midnight Black 09-03537 --- 17033 Lt. Parchment 09-03538 --- 17043 Med Graphite 09-03539 --- 17053 Med Parchment 09-03541 --- 17083 Dk Graphite 09-03542 --- 17093 Black 09-03543 --- 17103 Dark Gray 09-03544 --- 17013 Lt Gray 09-03546 --- 17123 Lt Neutral 09-03547 --- 17133 Med Dk Pewter 09-03548 --- 17163 Med Gray 09-03549 --- 17173 Shale 09-03551 --- 17203 Very Dk Pewter 09-03552 --- 17243 Ivory 09-03554 --- SEM AEROSPACE SURE-COAT PINT MIXING SYSTEM A waterborne coating system offering excellent flexibility and outstanding adhesion for a variety of interior and exterior automotive, marine, aerospace and commercial applications. Allows the user to change or enhance the current color while maintaining the texture and look of leather, vinyl and plastic. It will not get brittle with age nor soften or crack within normal temperature ranges. Contains 9 toners and 3 clears that can be mixed to match almost any color and dries quickly when brushed or sprayed. Also includes: Pint labels and A70034 Fleet Color Selector Gallon Kit .....................................................P/N 09-04435 Individual Colors Black Pint.....................................................P/N 09-03746 Red Pint .......................................................P/N 09-03747 Quindo Red pint...........................................P/N 09-03750 White Pint ....................................................P/N 09-03748 Yellow Oxide Pint ........................................P/N 09-03751 Silver Pint ....................................................P/N 09-05778 SEM SELF ETCHING PRIMER Easy to spray, sands quickly and easily, offers superior adhe- sion. Excellent coverage and hiding, increases production. Great for spot repairs and overall refinishing. Black................................................P/N 09-03594 Gray.................................................P/N 09-03595 Green ..............................................P/N 09-03596 SEM HIGH BUILD PRIMER SURFACER Provides superior adhesion, film build and flexibility when priming automotive metal, aluminum, urethane, plastic and other similar substrates. 20 oz. Aerosol. Gray....................................P/N 09-03787 White ..................................P/N 09-03788 SEM MANUAL APPLICATOR GUN 1.7OZ An easy loading applicator for dispensing 1.7 oz dual mix cartridges. Material is dispensed quickly and consistently. P/N 09-03792 SEM QUICK SET NOZZLE 1.7 OZ Ensures proper mix ratios for 1.7 oz dual cartridges. Quantity 6 per package ....P/N 09-03793 SEM QUICK SET Black, fast curing urethane adhesive designed for automotive plastic repair. With a 20 or 50 second work time, an excellent choice for quickly repairing bumper brackets, tabs, headlight buckets and grills. It may also be used for bonding backer panels, moldings emblems and most small plastic, metal and aluminum parts. 20 Second .......................................P/N 09-03790 50 Second .......................................P/N 09-03791 SEM PLASTIC REPAIR ADHESIVE Bumper Repair 1oz cartridge, bonds to most automotive bumpers and problem plastics. P/N 09-03789 470 CM WP ME HA AP LG EP CS IN EL AV TO PS BV WWW.AIRCRAFTSPRUCE.COM Prices Subject to Change without Notice - Valid as of June 1, 2024. Please view our website for current prices. 3M™ STIKIT™ PAPER DISC ROLL Constructed of durable aluminum oxide; works well for most wood species. The open coat feature provides a more aggressive cut than a comparable closed coat abra- sive of the same grade and a special loading resistant coating makes this disc a good choice when loading is a problem. The C weight, paper backing is more durable for extended disc life and harsher sanding applications. 3M™ WETORDRY™ PAPER SHEET 431Q A silicon carbide Wetordry™ abrasive product constructed on an A weight, intermediate paper backing. Can be run wet or dry.9”x11” sheets. 3M™ STIKIT™ DISC PAD 05575 For use with 5 diameter Stikit™ Discs. Has medium density foam and a 45° tapered edge for flexibility. These lightweight, shock-resistant pads have a vinyl face (blue) that provides excellent disc adhesion yet allows quick, easy removal. Blue 5” x 3/4” ............................P/N 09-01535 3M™ STIKIT™ DISC HAND PAD Use with 5 diameter Stikit™ Discs. Made with soft den- sity foam for conformability. Has 1 inch wide strap for holding the pad to the operators hand. P/N 09-01448 3M™ SCOTCH-BRITE™ GENERAL PURPOSE HAND PAD Scotch-Brite™ General Purpose Hand Pad 7447 com- bines flexibility with effective cutting action and precise hand control to accomplish tough cleaning jobs or pro- duce fine finishing results, use after use. Very fine grade aluminum oxide abrasives cut fast and fine, leaving a smooth, finished surface. Suitable for use on a wide variety of materials and for many different tasks. Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks. 1 each..........................................................P/N 09-01503 Box of 20 pads.............................................P/N 09-01503-20 3M™ SCOTCH-BRITE™ HEAVY DUTY HAND PAD 7440 Tight and dense, this pad is the most aggressive and durable web. Excellent for heavy cleaning, deburring, and finishing. May be used by hand, with a hand pad block or on an in-line sander. Grade: Medium 6”x9” .................................P/N 09-01504 3M™ SCOTCH-BRITE™ LIGHT DUTY CLEANSING PAD Conformable web and fine mineral are excellent for fine finishes, light cleaning. Among our least aggressive abrasive hand pad. May be used by hand, with a hand pad block or on an in-line sander. Grade SFIN. P/N 09-01415 3M™ SCOTCH-BRITE™ CLEAN AND FINISH F