King Air Checklist
BEECHCRAFT KING AIR B200C · Checklist
Overview
This document is a checklist for the Beechcraft King Air B200C, detailing the procedures for various phases of flight including pre-start, startup, taxi, takeoff, climb-out, cruise, descent, approach, landing, and shutdown. It provides step-by-step instructions to ensure safe and efficient operation of the aircraft.
- Pre-start checklist includes setting the parking brake and turning off the battery switch.
- Startup checklist requires monitoring engine instruments and ensuring oil pressure is checked.
- Before takeoff, ensure flaps are set and landing lights are on.
- Takeoff speeds include V1 at 105 KIAS, Vr at 110 KIAS, and V2 at 115 KIAS.
- Cruise speed should be maintained between 220-240 KIAS.
- Approach speed should be established at 150 KIAS and then reduced to 130 KIAS.
- Landing speed is 100 KIAS.
- Shutdown checklist includes turning off the battery switch and fuel condition levers.
Document
Source
Originally published by flugsimulation-vfr.ch. Sprinkle hosts a reference copy with an added summary, specifications and searchable full text.
Document details
- Type ·
- Checklist
- File size ·
- 223 KB
- Publisher ·
- flugsimulation-vfr.ch
- Language ·
- en
Specifications & performance
Extracted from this document.
Performance
- Cruise speed kias ·
- 220-240
- Landing speed kias ·
- 100
- Takeoff speed kias ·
- 110
V-speeds
- V1_KIAS ·
- 105
- V2_KIAS ·
- 115
- VR_KIAS ·
- 110
What is the King Air Checklist?
The King Air Checklist is a checklist for the BEECHCRAFT KING AIR B200C.
Where does the King Air Checklist come from?
This copy of the King Air Checklist was originally published by flugsimulation-vfr.ch and is hosted on Sprinkle as a free, searchable reference copy.
Most owners only have the POH. Here's the essential set for the BEECHCRAFT KING AIR B200C.
- Pilot's Operating Handbook / AFM
- Checklist
- Maintenance Manual
- Parts Catalog (IPC)
- Systems & Wiring
- Service Bulletins on file
- Type Certificate (TCDS)
In this document
Pre-Start Checklist
Set parking brake, throttle to idle, and turn off battery switch. Ensure flaps are up and landing gear lever is checked down.
Startup Checklist
Turn on fuel pumps and monitor engine instruments. Ensure oil pressure is checked and alternators are on.
Take-Off Checklist
Increase thrust to full, release brakes, and ensure landing gear is up after takeoff.
Cruise Checklist
Accelerate to cruise speed and check engine instruments and fuel.
Approach Checklist
Turn on landing lights and set flaps for landing while establishing approach speed.
Shutdown Checklist
Set parking brake, throttle to idle, and turn off battery switch and fuel condition levers.
Safety notes
- Monitor engine instruments during startup.
- Ensure landing gear is down before landing.
- Maintain specified speeds during takeoff and landing.
- Check altimeter settings at transition altitude.
- Verify that parking brakes are off before taxiing.
Full document text
King Air Checklist Pre-Start Checklist (1) Parking Break SET Throttle IDLE Battery Switch OFF Avionics Radio Master Switch OFF Master Caution Display ON Flaps UP Propeller NORMAL Fuel Cond. Lever CUTOFF Landing Gear Lever CHECK DOWN Battery Switch ON Panel Lights ON IF REQUIRED Avionics Radio Master Switch ON Request Clearance Transponder STANDBY Beacon ON Strobe ON Nav Wing Lights ON Startup Checklist (2) Throttle IDLE Fuel Pumps ON Fluel Flow /Fuel Cond. Lever IDLE Left Ignition and Eng Starter Switch ON Left ITT and N1 Turbine RPM MONITOR Left Oil/Fuel Annunciator EXTINGUISHED Right Oil Press CHECK Alternator 1 ON REPEAT for Right Engine Alternator 2 ON Master Warning Display OFF Engine Instruments CHECK Before Taxi Checklist (3) Taxi Lights ON Heading Indicator/Altimeters SET Instruments NORM OPERATIONS Radios and Avionics CHECKED AND SET Taxi Checklist (4) Parking Brakes RELEASE Taxi to runway MAX 20 KNOTS Brakes/Instruments CHECK Before Take-OFF Checklist (5) Parking Brakes SET Throttle IDLE Propeller HIGH RPM Flaps SET Landing Lights ON Taxi Lights OFF Pitot Heat ON Transponder ON Flight Instruments CHECK Engine Instruments CHECK Takeoff Data (V1,VR, V2) CHECK Request Takeoff Clearance Take-OFF Checklist (6) Smoothly increase thrust to FULL Brakes RELEASE V1= (Descision) 105 KIAS Vr= (Rotate)……10-15deg. Nose up 110 KIAS V2= (Safty Speed) 115 KIAS Pitch 10-15 DEGREES Landing Gear UP Trim for climb to maintain 140 KIAS TORQUE 65 Flaps UP Fuel Pumps OFF Climb –Out Checklist (7) Autopilot AS REQUIRED Landing Lights OFF Airspeed 160-170 KIAS TORQUE 80 Propeller 1600 RPM ATC AS REQUIRED Altimeter at FL18 SET 29.92 (1013MB) Cruise Cecklist (8) Accelerate to cruise speed 220-240 KIAS TORQUE85 Propeller 1600 RPM Engine & Instruments CHECK Fuel CHECK Radios TUNED AND SET Autopilot CHECK Lights AS REQUIRED Decent Checklist (9) ATIS/Airport Information CHECK Altimeter CHECK Radios SET Descend Speed 180 KIAS TORQUE 40 Propeller 1600 RPM At Trans Altitude (FL180) reset Altim. TO LOCAL Flaps/ Landing Gear CHECK UP Approach Checklist (10) Landing Lights ON Propeller HIGH RPM Fuel Cond. Lever FULL Speed : Establish 150 KIAS TORQUE 25 Flaps SET 15 Speed : Establish 130 KIAS TORQUE 35 Flaps FULL DOWN Landing Gear DOWN Final Glideslope Decent : Speed : Establish 105 KIAS TORQUE 20 Parking Brakes VERIFY OFF Landing Checklist (11) Landing Gear CHECK DOWN Autopilot & Autothrottle OFF Landing Speed 100 KIAS Brakes AS REQUIRED Taxi to Ramp (12) Strobe Light OFF Flaps UP Taxi Light ON Landing Lights OFF Speed MAX 20 KNOTS Transponder 1200/OFF Shutdown Checklist (13) Parking Brake SET Throttle IDLE Pitot Heat /De-Ice OFF Taxi/Nav. Lights OFF Beacon/ Anti Collision Lights OFF Fuel Cond. Levers CUTOFF Battery Switch OFF Alternator Switches OFF