Proline 21 IFIS Manual.pdf - Corporate Jet Solutions

Graphical Weather (GWX-3000) ............................................ 5-4 Display Last GWX Image (AFD-5220E) ............................. 5-5 Select New GWX Image or Text Weather (AFD- 5220E) ............................................................................... 5-6 Select TAF/METAR Report ............................................. 5-7 Select SIGMET/AIRMET Report .................................... 5-8 Select ANIMATED NEXRAD (-105, -106) ...................... 5-9 Select GWX Image Overlay ......................................... 5-10 Map Displays (AFD-5220E) ................................................. 5-10 5th Edition ii 4 April 07 IFIS-5000 OPERATOR’S GUIDE Integrated Flight Information System Table of Contents Tab Title Page Map Display Options ........................................................ 5-12 Chart Subscription Page (AFD-5220E) ............................... 5-13 Enter Subscription Number .............................................. 5-14 Add a Region ................................................................... 5-16 Database Effectivity (AFD-5220E) ....................................... 5-17 View Database Details ..................................................... 5-18 File Server Configuration (AFD-5220E) ............................... 5-19 Update Purchased Options .............................................. 5-20 MDC Diagnostics (AFD-5220E) ........................................... 5-21 Checklists ............................................................................ 5-22 Load Checklist (AFD-5220E) ........................................... 5-23 Display Checklist (AFD-5220E) ....................................... 5-24 Checklist Operation ...................................................... 5-26 6 IFIS-5000 DISPLAY OPERATION (AFD-3320) GWX-3000, GWX-3001, and GWX-5000 .............................. 6-1 7 CONTROLS AND INDICATORS Cursor Control Panel (CCP-3000) ......................................... 7-1 Cursor Control Panel (CCP-3310) ......................................... 7-6 Cursor Control Panel (CCP-50XX) ...................................... 7-12 Multifunction Display (MFD) (AFD-3010E) .......................... 7-18 Multifunction Display (MFD) (AFD-3320) ............................. 7-21 Multifunction Display (MFD) (AFD-5220E) .......................... 7-22 8 MENUS AND DISPLAYS Introduction ............................................................................ 8-1 E-Charts (AFD-3010E) .......................................................... 8-2 Display Chart (AFD-3010E) ............................................... 8-3 Chart Main Index (AFD-3010E) ......................................... 8-7 Chart Type Menu (AFD-3010E) ....................................... 8-11 Chart List (AFD-3010E) ................................................... 8-13 NOTAMs Menu (AFD-3010E) .......................................... 8-16 Graphical Weather (GWX-5000) (AFD-3010E) ................... 8-20 GWX Image List (AFD-3010E) ......................................... 8-22 Graphical Weather Images (AFD-3010E) ..................... 8-28 Graphical Weather (GWX-3000 and GWX-3001) (AFD-3010E) ....................................................................... 8-38 GRAPHICAL WEATHER Menu (AFD-3010E) ................. 8-43 METAR/TAF Reports (AFD-3010E) .............................. 8-46 SIGMET/AIRMET Reports (AFD-3010E) ..................... 8-48 5th Edition 4 April 07 iii OPERATOR’S GUIDE IFIS-5000 Table of Contents Integrated Flight Information System Tab Title Page ANIMATED NEXRAD (AFD-3010E) (-105, -106, -108) .................................................................................... 8-49 WINDS ALOFT (AFD-3010E) (-108) ............................ 8-50 SATELLITE (AFD-3010E) (-108) .................................. 8-51 Overlays (AFD-3010E) ................................................. 8-52 Overlay Legends (AFD-3010E) .................................... 8-63 Map Displays (AFD-3010E) ................................................. 8-64 PPOS Map (AFD-3010E) ................................................. 8-64 TFR Text Report List (AFD-3010) (-108) .......................... 8-68 PLAN Map (AFD-3010E) ................................................. 8-70 Database Effectivity Page (AFD-3010E) ............................. 8-72 Chart Subscription Page (AFD-3010E) ............................... 8-75 File Server Configuration Page (AFD-3010E) ..................... 8-77 MDC Diagnostics (AFD-3010E) ........................................... 8-79 Checklists (AFD-3010E) ...................................................... 8-81 E-Charts (AFD-5220E) ........................................................ 8-85 Display Chart (AFD-5220E) ............................................. 8-86 Chart Main Index (AFD-5220E) ....................................... 8-90 Chart Type Menu (AFD-5220E) ....................................... 8-94 Chart List (AFD-5220E) ................................................... 8-96 NOTAMs Menu (AFD-5220E) .......................................... 8-99 Available Charts Menu (AFD-5220E) ............................. 8-102 Graphical Weather (GWX-5000) (AFD-5220E) ................. 8-104 GWX Image List (AFD-5220E) ....................................... 8-106 Graphical Weather Images (AFD-5220E) ................... 8-112 Graphical Weather (GWX-3000) (AFD-5220E) ................. 8-122 GRAPHICAL WEATHER Menu (AFD-5220E) ............... 8-127 METAR/TAF Reports (AFD-5220E) ............................ 8-129 SIGMET/AIRMET Reports (AFD-5220E) ................... 8-131 ANIMATED NEXRAD (AFD-5220E) (-105, -106, -108) .................................................................................. 8-132 Overlays (AFD-5220E) ............................................... 8-133 Overlay Legends (AFD-5220E) .................................. 8-142 GWX Overlays Menu (AFD-5220E) ................................... 8-143 Map Displays (AFD-5220E) ............................................... 8-144 PPOS Map (AFD-5220E) ............................................... 8-144 PLAN Map (AFD-5220E) ............................................... 8-153 Database Effectivity Page (AFD-5220E) ........................... 8-161 Chart Subscription Page (AFD-5220E) ............................. 8-165 File Server Configuration Page (AFD-5220E) ................... 8-167 MDC Diagnostics (AFD-5220E) ......................................... 8-169 5th Edition iv 4 April 07 IFIS-5000 OPERATOR’S GUIDE Integrated Flight Information System Table of Contents Tab Title Page Checklists (AFD-5220E) .................................................... 8-170 AFD-3320 Features ........................................................... 8-175 LWR Menu Format (AFD-3320) ..................................... 8-176 LWR Menu Map Symbols (AFD-3320) ........................... 8-177 9 MESSAGES AND ANNUNCIATORS Visual Annunciations ............................................................. 9-1 MFD Format Quick Access Messages ............................... 9-1 MFD Display Message Window ......................................... 9-2 E-Chart Cycle Messages ................................................... 9-3 E-Chart Fault Messages .................................................... 9-4 E-Chart Messages ............................................................. 9-5 GWX-5000 Messages ........................................................ 9-6 GWX-3000 Messages ........................................................ 9-7 E-Map Messages ............................................................... 9-9 Database Messages ........................................................ 9-11 Subscription Messages .................................................... 9-13 FSU Configuration Messages .......................................... 9-14 10 IFIS-5000 MENU NAVIGATION Menu Diagrams (AFD-3010E), (AFD-3320) ........................ 10-1 Menu Diagrams (AFD-5220E) ........................................... 10-13 11 SUPPORT INFORMATION Configuration Information .................................................... 11-1 Customer Support Information ............................................ 11-2 Rockwell Collins ............................................................... 11-2 Universal Weather ............................................................ 11-3 XM Satellite Weather Service .......................................... 11-3 Jeppesen ......................................................................... 11-3 GLOSSARY .................................................................. Glossary-1 INDEX ................................................................................ Index-1 5th Edition 4 April 07 v OPERATOR’S GUIDE IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition vi 4 April 07 IFIS-5000 OPERATOR’S GUIDE Integrated Flight Information System List of Illustrations LIST OF ILLUSTRATIONS Figure Title Page 2-1 IFIS-5000 Block Diagram ..................................................... 2-4 8-1 Display Chart Format (AFD-3010E) ..................................... 8-3 8-2 Chart Main Index (AFD-3010E) ............................................ 8-7 8-3 Chart Type Menu (AFD-3010E) .......................................... 8-11 8-4 Chart List (AFD-3010E) ...................................................... 8-13 8-5 NOTAMS Menu (AFD-3010E) ............................................ 8-16 8-6 Graphical Weather Format ................................................. 8-20 8-7 GWX Image List (AFD-3010E) ........................................... 8-22 8-8 NEXRAD Image (AFD-3010E) ........................................... 8-28 8-9 Tops/Movement Image (AFD-3010E) ................................. 8-29 8-10 WX Depiction Image (AFD-3010E) ..................................... 8-31 8-11 Winds/Temps Image (AFD-3010E) ..................................... 8-33 8-12 Turbulence Image (AFD-3010E) ......................................... 8-35 8-13 ICING Image (AFD-3010E) ................................................ 8-36 8-14 Graphical Weather Format (AFD-3010E) ........................... 8-38 8-15 Graphical Weather Menu (AFD-3010E) ............................. 8-43 8-16 METAR Reports Page (AFD-3010E) .................................. 8-46 8-17 TAF Report Page (AFD-3010E) .......................................... 8-47 8-18 SIGMET/AIRMET Reports Page (AFD-3010E) .................. 8-48 8-19 Animated NEXRAD (AFD-3010E) (-105, -106, -108) .......... 8-49 8-20 Winds Aloft Image (AFD-3010E) (-108) .............................. 8-50 8-21 Satellite Image (AFD-3010E) (-108) ................................... 8-51 8-22 NEXRAD Overlay (AFD-3010E) ......................................... 8-52 8-23 METAR Overlay (AFD-3010E) ............................................ 8-57 8-24 Airport Idents Overlay (AFD-3010E) ................................... 8-59 8-25 SIGMET Overlay (AFD-3010E) .......................................... 8-60 8-26 Lightning Overlay (AFD-3010E) (-108) ............................... 8-61 8-27 A/C Flight Info Overlay (AFD-3010E) ................................. 8-62 8-28 Overlay Legends Page (AFD-3010E) ................................. 8-63 8-29 Present Position Map (AFD-3010E) (-108) ......................... 8-64 8-30 Plan Map Format (AFD-3010E) .......................................... 8-70 8-31 Database Effectivity Page (AFD-3010E) ............................ 8-72 8-32 Chart Subscription Page (AFD-3010E) .............................. 8-75 8-33 File Server Configuration Page (AFD-3010E) .................... 8-77 8-34 Checklists (AFD-3010E) ..................................................... 8-81 8-35 Display Chart Format (AFD-5220E) ................................... 8-86 8-36 Chart Main Index (AFD-5220E) .......................................... 8-90 8-37 Chart Type Menu (AFD-5220E) .......................................... 8-94 5th Edition 4 April 07 vii OPERATOR’S GUIDE IFIS-5000 List of Illustrations Integrated Flight Information System Figure Title Page 8-38 Chart List (AFD-5220E) ...................................................... 8-96 8-39 NOTAMS Menu (AFD-5220E) ............................................ 8-99 8-40 Available Charts Menu (AFD-5220E) ............................... 8-102 8-41 Graphical Weather Format (AFD-5220E) ......................... 8-104 8-42 GWX Image List (AFD-5220E) ......................................... 8-106 8-43 NEXRAD Image (AFD-5220E) ......................................... 8-112 8-44 Tops/Movement Image (AFD-5220E) ............................... 8-113 8-45 WX Depiction Image (AFD-5220E) ................................... 8-115 8-46 Winds/Temps Image (AFD-5220E) ................................... 8-117 8-47 Turbulence Image (AFD-5220E) ....................................... 8-119 8-48 Icing Image (AFD-5220E) ................................................. 8-120 8-49 Graphical Weather Format (AFD-5220E) ......................... 8-122 8-50 Graphical Weather Menu (AFD-5220E) ........................... 8-127 8-51 METAR Reports Page (AFD-5220E) ................................ 8-129 8-52 TAF Report Page (AFD-5220E) ........................................ 8-130 8-53 SIGMET/AIRMET Reports Page (AFD-5220E) ................ 8-131 8-54 Animated NEXRAD (AFD-5220E) (-105, -106, -108) ................................................................................. 8-132 8-55 NEXRAD Overlay (AFD-5220E) ....................................... 8-133 8-56 METAR Overlay (AFD-5220E) .......................................... 8-138 8-57 Airport Idents Overlay (AFD-5220E) ................................. 8-140 8-58 SIGMET Overlay (AFD-5220E) ........................................ 8-141 8-59 Overlay Legends Page (AFD-5220E) ............................... 8-142 8-60 GWX Overlays Menu (AFD-5220E) .................................. 8-143 8-61 Present Position Map (AFD-5220E) ................................. 8-144 8-62 Plan Map Format (AFD-5220E) ........................................ 8-153 8-63 Database Effectivity Page with and without STAT MENU (AFD-5220E) .................................................................... 8-161 8-64 Chart Subscription Page (AFD-5220E) ............................ 8-165 8-65 File Server Configuration Page (AFD-5220E) .................. 8-167 8-66 Checklists (AFD-5220E) ................................................... 8-170 8-67 Graphical Weather Overlay Selections (AFD-3320) .......... 8-175 8-68 LWR Menu, Format (AFD-3320) ....................................... 8-176 8-69 LWR Menu, Map Symbols (AFD-3320) ............................ 8-177 10-1 IFIS-5000 Menu Architecture (AFD-3010E), (AFD- 3320) .................................................................................. 10-3 10-2 Chart Display to Chart Main Index (AFD-3010E), (AFD-3320) ......................................................................... 10-5 10-3 Chart Display to Named Shortcut (AFD-3010E), (AFD-3320) ......................................................................... 10-6 5th Edition viii 4 April 07 IFIS-5000 OPERATOR’S GUIDE Integrated Flight Information System List of Illustrations Figure Title Page 10-4 Chart Display to Chart Type Menu (AFD-3010E), (AFD-3320) ......................................................................... 10-7 10-5 Chart Display to Chart List (AFD-3010E), (AFD- 3320) .................................................................................. 10-9 10-6 Chart Display to NOTAM (AFD-3010E), (AFD- 3320) ................................................................................ 10-10 10-7 XM Weather Menu Architecture (AFD-3010E), (AFD-3320) ....................................................................... 10-11 10-8 IFIS-5000 Menu Architecture (AFD-5220E) ..................... 10-15 10-9 Chart Display to Chart Main Index (AFD-5220E) ............. 10-17 10-10 Chart Display to Named Shortcut (AFD-5220E) ............... 10-18 10-11 Chart Display to Chart Type Menu (AFD-5220E) ............. 10-19 10-12 Chart Display to Chart List (AFD-5220E) ......................... 10-21 10-13 Chart Display to NOTAM (AFD-5220E) ............................ 10-22 10-14 XM Weather Menu Architecture (AFD-5220E) ................. 10-23 5th Edition 4 April 07 ix OPERATOR’S GUIDE IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition x 4 April 07 IFIS-5000 INTRODUCTION Integrated Flight Information System Table of Contents TABLE OF CONTENTS Title Page Introduction ....................................................................................... 1-1 Safety Summary ............................................................................... 1-2 Notices ............................................................................................. 1-3 List of Acronyms and Abbreviations ................................................. 1-3 5th Edition 4 April 07 i INTRODUCTION IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition ii 4 April 07 IFIS-5000 INTRODUCTION Integrated Flight Information System INTRODUCTION This operator’s guide describes the components and operation of the IFIS-5000 Integrated Flight Information System (IFIS). This guide is a supplement to the existing Pro Line 21 Continuum Avionics System Pilot’s Guide, and covers only the features installed with the IFIS. It is not intended to be a training manual. It is a guide to understanding the system as designed by Rockwell Collins Business and Regional Systems. The general operational information in this guide must also be supplemented with information contained in the Aircraft Flight Manual (AFM). The IFIS-5000 system overview is contained in the OVERVIEW chapter. Basic operating procedures for the IFIS-5000 are described in the IFIS-5000 DISPLAY OPERATIONS chapter, and information on the operation of the Cursor Control Panel (CCP) is contained in the CONTROLS chapter. The MENUS AND DISPLAYS chapter describes the MFD displays for the IFIS-5000 system. The IFIS-5000 MENU NAVIGATION chapter contains diagrams of the IFIS-5000 menu navigation. The diagrams are in foldout format and are designed to assist the operator with understanding how the system interacts with CCP control inputs and on-screen menu selections. Information on customer support can be found in the SUPPORT INFORMATION chapter at the back of the book. To submit comments regarding this manual, please contact: Rockwell Collins Services 350 Collins Rd NE Cedar Rapids, IA 52498-0001 Attn: Technical Operations M/S 153-250 or send email to: techmanuals@rockwellcollins.com 5th Edition 4 April 07 1-1 INTRODUCTION IFIS-5000 Safety Summary Integrated Flight Information System SAFETY SUMMARY C CAUTION Some aircraft operators can have special procedures that are different from those given in this operator’s guide. Refer to the applicable aircraft flight manual for instructions specified for your aircraft. C CAUTION Be careful if you wear sunglasses with lenses that cause you not to see some colors. These types of lenses can have an unwanted effect on how some colors show on the EFIS displays. You cannot see some items on the display when you wear these types of sunglasses. Also, the color of some items can change. For example, some blue lenses can cause a magenta display item to show as red. If the displays are read incorrectly, possible damage to the equipment could occur. C CAUTION Monitor all instruments to identify if a malfunction occurs. The IFIS-5000 and related components operate as a system and usually give the flight crew an indication when a malfunction occurs. But the flight crew must also know that it is not possible to monitor the system for all possible malfunctions. Also, incorrect operation could occur without an indication of a malfunction. 5th Edition 1-2 4 April 07 IFIS-5000 INTRODUCTION Integrated Flight Information System List of Acronyms and Abbreviations NOTICES N NOTE Defects that you can see on the display surface of the AFD-3010, AFD-5220, or AFD-3320 are permitted. But these defects must not cause a distraction or make the flight crew read the display incorrectly. Also, defects you cannot see in an operational format from a minimum view distance are permitted. Defective ON or defective OFF rows or columns can make servicing of the AFD-3010, AFD-5220, or AFD-3320 necessary. Groups (three or more adjacent elements) of defective ON elements are not permitted. Defective OFF elements are permitted if they do not make the flight crew read the display incorrectly or cause distraction. The number of defective ON elements that are permitted include no more than: six red, six green, 10 blue, or five sets of two adjacent defects. The number of defective OFF elements that are permitted include no more than: five sets of two adjacent defects, one set of three adjacent defects, or 30 defective OFF elements. LIST OF ACRONYMS AND ABBREVIATIONS A/C Aircraft ADF Automatic Direction Finder ADV Advance AFD Adaptive Flight Display AFM Airplane Flight Manual AIRMET Airman’s Meteorological Advisory ATC Air Traffic Control CCP Cursor Control Panel CDU Control Display Unit CMU Communications Management Unit COM Communication CONUS Continental United States CPN Collins Part Number CTA Control Area E-Chart Electronic Chart E-Map Electronic Map ECU External Compensation Unit EFIS Electronic Flight Instrument System EIS Engine Indicating System 5th Edition 4 April 07 1-3 INTRODUCTION IFIS-5000 List of Acronyms and Abbreviations Integrated Flight Information System ESC Escape FAA Federal Aviation Administration FCS Flight Control System FMS Flight Management System FSU File Server Unit GEO-POL Geopolitical GPS Global Positioning System GWX Graphical Weather HF High Frequency IAPS Integrated Avionics Processor System ICAO International Civil Aviation Organization ID Identifier IFIS Integrated Flight Information System ILS Instrument Landing System km Kilometer(s) LSK Line Select Key LX Lightning m Meter(s) MDC Maintenance Diagnostic Computer MET Meteorological METAR Aviation Routine Weather Reports MFD Multifunction Display NAV Navigation NAVAID Navigational Aid NEXRAD Next Generation Weather Radar NM Nautical Mile(s) NOTAM Notices To Airmen PFD Primary Flight Display PPOS Present Position RDR Radar RIU Radio Interface Unit SIGMET Significant Meteorological Advisory sm Statute Mile(s) TAF Terminal Area Forecast TAWS Terrain Awareness Warning System TCA Terminal Control Area TCAS Traffic Collision Avoidance System TERR Terrain display from TAWS TFC Traffic display from TCAS TFR Temporary Flight Restriction TMA Terminal Maneuver Area 5th Edition 1-4 4 April 07 IFIS-5000 INTRODUCTION Integrated Flight Information System List of Acronyms and Abbreviations UTC Coordinated Universal Time WGS-84 World Geodetic System 1984 WPT Waypoint WX Weather XM XM Satellite Weather Service 5th Edition 4 April 07 1-5 INTRODUCTION IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition 1-6 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System Table of Contents TABLE OF CONTENTS Title Page Introduction ....................................................................................... 2-1 System Description .......................................................................... 2-3 Key Operating Features ................................................................ 2-3 Components ................................................................................. 2-5 Key Performance Features ........................................................... 2-8 5th Edition 4 April 07 i OVERVIEW IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition ii 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System Introduction OVERVIEW INTRODUCTION Rockwell Collins created the IFIS-5000 system to provide situational awareness information to the flight crew while keeping the amount of paper required in the cockpit to a minimum. The situational awareness functions, displayed on a Multifunction Display (MFD), include electronic Jeppesen charts, graphical weather images datalinked to the aircraft, and map overlays that include geopolitical boundaries, airspace, and airways. The figure on page 2-4 shows the components of the IFIS-5000, as well as other interfacing components. N NOTE The IFIS-5000 system provides supplemental aircraft situational awareness information. It is not intended as a means for navigation or weather avoidance. N NOTE The Rockwell Collins Avionics units described in this operator’s guide show typical operation and capabilities. The non-Rockwell Collins Avionics units (e.g., Flight Management Computer related to chart line capability) may or may not cause typical operation. Refer to the appropriate vendor documentation for specific details on the non-Rockwell Collins Avionics units. 5th Edition 4 April 07 2-1 OVERVIEW IFIS-5000 Introduction Integrated Flight Information System N NOTE With a non-Rockwell Collins FMS installed, the following issues should be noted: The GWX-5000 option is not available because it requires a Rockwell Collins CDU to request the graphical weather images through the datalink system. XM main menu TAF/METAR Report for International Civil Aviation Organization (ICAO) airport identifiers of the origin, destination and alternate are those that are entered manually on the Chart Main Index menu. FMS map background symbology selections are displayed on the second page of the E-Map menu when on the PPOS or PLAN Map. The first page of the E-Map menu will display IFIS background symbology. A second push of the MENU button on the CCP will bring up the second page allowing the user to select the FMS map background symbology for display. The type of FMS map background symbology is dependent on the FMS type. MDC Diagnostics and Checklist require an MDC to be installed for these functions to be available. Chartlink will not function. The main menu will display CHART PRESETS in the shortcut data source field. ICAO airport identifiers will need to be entered manually by the user. (For aircraft with smart entry capability, manual entry of ICAO airport identifiers are easier for the user.) FMS NAV database information will not be displayed on the Database Effectivity page. 5th Edition 2-2 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System System Description SYSTEM DESCRIPTION The IFIS-5000 is an evolution of the current Rockwell Collins Pro Line 21 Continuum system. Specifically, it is a Multifunction Display (MFD) upgrade that adds electronic charts, datalink Graphical Weather (GWX), and enhanced map features to the traditional displays. KEY OPERATING FEATURES • Electronic Charts (E-Charts) available for display on the MFD. • E-Chart one button selection/de-selection. • Automated E-Chart selection linked with FMS flight plan. • Datalink graphical weather available for display on the MFD (or NEXRAD overlaid on the MFD Plan Map). • Enhanced map data (Geopolitical, Airways, Airspace, etc.) available for display on FMS PPOS Map and Plan Map. 5th Edition 4 April 07 2-3 OVERVIEW IFIS-5000 System Description Integrated Flight Information System Figure 2-1 IFIS-5000 Block Diagram 5th Edition 2-4 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System System Description COMPONENTS FSU-5010 File Server Unit The FSU-5010 provides the processing and storage for all IFIS functions. The FSU communicates with the cockpit displays via an Ethernet bus. AFD-3010E Adaptive Flight Display The AFD-3010 is normally installed for the pilot and copilot side PFDs. The AFD-3010E is installed for the pilot and copilot side MFDs. The AFD-3010E has an Ethernet card to allow communication with the FSU, which is necessary for the E-Chart, GWX, and E-Maps functions. The AFD-3010E will function normally if installed in the PFD position. The AFD-3010 (without the Ethernet card) can be used in the MFD position, but the E-Chart, GWX, and E-Maps functions will not be available in this configuration. AFD-3320 Adaptive Flight Display The AFD-3320 is normally installed for the pilot and copilot side PFDs. The AFD-3320 is installed for the pilot and copilot side MFDs. The AFD-3320 has an Ethernet card to allow communication with the FSU, which is necessary for the E-Chart, GWX, and E-Maps functions. The AFD-3320 will function normally if installed in the PFD position. The AFD-3320 (without the Ethernet card) can be used in the MFD position, but the E-Chart, GWX, and E-Maps functions will not be available in this configuration. 5th Edition 4 April 07 2-5 OVERVIEW IFIS-5000 System Description Integrated Flight Information System AFD-5220E Adaptive Flight Display The AFD-5220 is normally installed for the pilot and copilot side PFDs. The AFD-5220E is installed for the pilot and copilot side MFDs. The AFD-5220E has an Ethernet card to allow communication with the FSU, which is necessary for the E-Chart, GWX, and E-Maps functions. The AFD-5220E will function normally if installed in the PFD position. The AFD-5220 (without the Ethernet card) can be used in the MFD position, but the E-Chart, GWX, and E-Maps functions will not be available in this configuration. CCP-3000 Cur- sor Control Panel The CCP-3000 controls the IFIS functions via MFD onscreen menus. Dedicated controls are provided for chart selection, a joystick for panning across the chart, quick MFD format access keys, and MFD menu controls. CCP-3310 Cur- sor Control Panel The CCP-3310 controls the IFIS functions via MFD onscreen menus. Dedicated controls are provided for chart selection, a joystick for panning across the chart, quick MFD format access keys, and MFD menu controls. CCP-50XX Cur- sor Control Panel The CCP-50XX controls the IFIS functions via MFD onscreen menus. Dedicated controls are provided for chart selection, a joystick for panning across the chart, quick MFD format access keys, and MFD menu controls. 5th Edition 2-6 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System System Description CDU Control Display Unit The CDU provides centralized control and display functions for the Flight Management System (FMS) as well as the COM, NAV, ADF, HF, ATC transponder, and TCAS subsystems. Text messaging can also be done via the CDU. A pilot side and copilot side CDU is installed. Control selections and display data are synchronized so that selections made on the same side CDU show on the opposite side CDU. CMU-4000 Communication Management Unit/RIU-40X0 Radio Interface Unit The CMU-4000 and RIU-40X0 products provide the same functionality. The RIU-40X0 is used in datalink installations with a Rockwell Collins integrated audio system. The CMU-4000 is used with non-integrated audio systems. Either product (CMU or RIU) provides the airborne interface between the datalink communications network ground stations and the aircraft. The CMU or RIU is required for installations with GWX-5000 systems. XM Receiver and Antenna The XM Satellite receiver and antenna provide the interface between the XM Satellite Radio weather service and the aircraft for aircraft with the GWX-3000 weather system. The XM receiver transmits weather data from XM Satellite Radio to the FSU, which processes the data for display on the MFD. 5th Edition 4 April 07 2-7 OVERVIEW IFIS-5000 System Description Integrated Flight Information System Data Base Unit (DBU) (optional) The DBU-5000 is a data loader and interface for the Line Replaceable Units (LRU) on the aircraft. Depending on the installation, it may be mounted in the aircraft cockpit or in an avionics bay. The DBU transfers files between aircraft LRU and removable storage media (for example the USB 2.0 memory device). Collins Portable Access Soft- ware (CPAS) The CPAS is installed on a laptop computer and uses an Ethernet cable to connect to the File Server Unit (FSU). The CPAS and laptop are used to upload FSU data bases, load the monthly data base updates to the Flight Management Computers (FMCs), upload/download user waypoints and routes from the FMC, upload diagnostic tables and checklist files to the Maintenance Diagnostic Computer (MDC), and download maintenance data from the MDC. Maintenance Di- agnostics Com- puter (MDC) The MDC uses internal fault isolation logic that is based on avionics unit failure data to identify failed or degraded avionics units. The fault logic is updated via the DBU or CPAS. The MDC supplies fault information to the MFD and DBU or CPAS via the Integrated Avionics Processor System (IAPS) and system bus structure. The MDC is physically located in the IAPS card cage. KEY PERFORMANCE FEATURES Several system status pages are available for display on the MFD. Those pages include: 5th Edition 2-8 4 April 07 IFIS-5000 OVERVIEW Integrated Flight Information System System Description • Charts subscription status • Database status • File Server Unit (FSU) configuration • Maintenance Diagnostic Computer (MDC) diagnostic codes • Configuration access • Flight Control System (FCS) diagnostics. 5th Edition 4 April 07 2-9 OVERVIEW IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition 2-10 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System Table of Contents TABLE OF CONTENTS Title Page E-Charts ........................................................................................... 3-1 Display Chart ................................................................................ 3-2 Chart List Off ............................................................................. 3-2 Chart List On ............................................................................. 3-3 Chart Main Index .......................................................................... 3-4 Search for Airport ...................................................................... 3-4 Display Selected Chart .............................................................. 3-6 Change Shortcut ....................................................................... 3-6 Cancel Change Shortcut ........................................................... 3-7 Set Day or Night Color .............................................................. 3-8 Exit CHART MAIN INDEX ......................................................... 3-8 Chart Type Menu .......................................................................... 3-9 Select Chart Type ...................................................................... 3-9 Exit Chart Type ........................................................................ 3-10 Chart List .................................................................................... 3-11 Via Display Chart ..................................................................... 3-11 Via Chart Main Index ............................................................... 3-11 Via Chart Type Menu .............................................................. 3-12 Select a Chart from the Chart List ........................................... 3-12 Exit Chart List .......................................................................... 3-13 NOTAMS Menu ........................................................................... 3-14 Select a NOTAM ...................................................................... 3-14 Exit NOTAMs Page ................................................................. 3-15 5th Edition 4 April 07 i E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition ii 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) E-CHARTS RATIONALE: The E-Charts feature allows the flight crew to view electronic charts in a format that mimics paper charts. SUMMARY: The E-Chart format provides the ability to show an electronic chart on the MFD. The E-Charts are selected automatically by the FMS when a flight plan is entered or are selected manually by the flight crew. The available charts are listed on the CHART MAIN INDEX. The CCP controls are used for chart selection and entering data manually. When aircraft position data is available, a moving aircraft symbol shows on E-Charts that are geographically-referenced. A non-geographically referenced chart has a magenta aircraft symbol with a circle and slash on the top right hand corner of the chart. In version -103/003 or 104/004 FSA4.X, the aircraft symbol shows for ICAOs in the USA only. For version -105/005, FSA5.0, the aircraft symbol shows for any ICAO that is World Geodetic System 1984 (WGS-84) compliant. PRECONDITIONS: The databases associated with E-Charts must be loaded into the FSU before the system is functional. Make sure all pertinent information (subscription numbers, access codes, etc.) is available before attempting to install databases. Refer to the Support Information chapter of this guide for information on how to contact Jeppesen and Rockwell Collins Customer Support. Refer to the CPAS-3000 Data Loader Operator’s Guide (CPN 523-0790386) or the DBU-5000 Data Base Unit Operator’s Guide (CPN 523-0808703) for information on how to load a database. 5th Edition 4 April 07 3-1 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System CHECKLIST: 1 To show an E-Chart automatically, enter a flight plan into the FMS. 2 To manually select a chart, follow the step(s) for the type of chart to be displayed. DISPLAY CHART SUMMARY: Controls on the CCP are used to select the display of an E-Chart on the MFD. CHECKLIST: 1 To display a chart manually, follow either the Chart List Off or the Chart List On checklist. CHART LIST OFF CHECKLIST: 1 Push the CHART button on the CCP to show the last displayed chart. 2 Turn the DATA knob on the CCP to cycle through the list of linked charts associated with the airport identified on the displayed chart. • Turn the knob clockwise to show the next chart on the list of linked charts. The next chart function stops at the bottom of the list of linked charts (does not wrap to the top of the list). 5th Edition 3-2 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts • Turn the knob counterclockwise to show the previous chart on the list of linked charts. The previous chart function stops at the top of the list of linked charts (does not wrap to the bottom of the list). CHART LIST ON CHECKLIST: 1 Push the MENU button on the CCP to show the CHART MAIN INDEX. 2 Turn the MENU ADV knob to position the menu cursor around the desired chart. 3 Push the PUSH SELECT button to select the chart for display. 5th Edition 4 April 07 3-3 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System CHART MAIN INDEX SUMMARY: The CHART MAIN INDEX shows the list of shortcuts to the charts needed for the instrument procedures associated with the origin, destination, and alternate airport. Selecting one of these shortcuts causes the associated chart to show. The origin, destination, and alternate airport entries are supplied by the FMS when a compatible FMS is installed and a flight plan is entered. The OTHER AIRPORT entry is always entered by the flight crew on this menu. PRECONDITIONS: The origin, destination, and alternate airport entries are entered by the flight crew when a compatible FMS is not installed. CHECKLIST: 1 To show the CHART MAIN INDEX, do either of the steps that follow: • With no chart menus in view, push the MENU button on the CCP • When the Chart Type, Chart List, or NOTAM menu is in view, push the ESC button on the CCP. SEARCH FOR AIRPORT CHECKLIST: 1 With the CHART MAIN INDEX in view, turn the MENU ADV knob on the CCP to position the menu cursor around the desired entry field 2 Push the PUSH SELECT button to activate the text entry cursor and to position the cursor around the first character of the entry field. 5th Edition 3-4 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts N NOTE In version -103, -104, upon PUSH SELECT button operation the first character of the entry field defaults to K_ _ _. 3 Turn the DATA knob on the CCP to change the character. Clockwise rotation advances the character field. Counterclockwise rotation decreases the character field. TECH DETAIL In software -105, -106, or -108, when entering a character at any position, the remaining character fields are updated to the first valid IDENT that matches the currently entered position. 4 Turn the MENU ADV knob to move the cursor to the next character field. Clockwise rotation moves the cursor to the right; counterclockwise rotation moves the cursor to the next character on the left. TECH DETAIL In software -105, -106, or -108, after a character has been updated, only those characters that can follow the already entered character data (based on the IDENT information in the database) appear in the list of available choices for subsequent character positions. 5 Repeat steps 3 and 4 to enter the four letter ICAO airport identifier. 6 Do either of the steps that follow to end the data entry mode: TECH DETAIL When the data entry mode is ended, the cursor expands to surround the whole of the data entry field and resumes operation as a menu cursor. 5th Edition 4 April 07 3-5 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System 6.1 Push the PUSH SELECT button on the CCP to finish entering the airport ID and have the system process the information. 6.2 Push the ESC button to cancel data entry mode and keep the previous value. DISPLAY SELECTED CHART CHECKLIST: 1 With the CHART MAIN INDEX in view, turn the MENU ADV knob to position the menu cursor around the desired shortcut control. 2 Push the PUSH SELECT button momentarily. CHANGE SHORTCUT SUMMARY: The change shortcut action allows the flight crew to change an existing shortcut or to fill a blank shortcut. When the change shortcut action is activated, a submenu comes into view. The submenu contains a list of shortcut items that can be selected. Other menus within the submenus may also be accessed from this menu. CHECKLIST: 1 Turn the MENU ADV knob to position the menu cursor around the desired shortcut. 5th Edition 3-6 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts 2 If the shortcut text field does not contain a shortcut, push and release the PUSH SELECT button. If the shortcut text field contains a shortcut, push and hold the PUSH SELECT button for more than one second. 3 From either the Chart Type menu or the Chart List, push the PUSH SELECT button to select the desired chart to fill the shortcut field. POST CONDITIONS: The change shortcut action is completed when a shortcut item is selected from one of the submenus. When the change shortcut action is completed, the submenus are closed and the selected shortcut item shows in the shortcut text field. CANCEL CHANGE SHORTCUT SUMMARY: The change shortcut action may be canceled. When the change shortcut action is canceled, the last selected shortcut item shows in the shortcut text field, or the shortcut text field is blank if no shortcut item had been previously selected. CHECKLIST: 1 Do one of the steps that follow to cancel the change of the shortcut: • Push the ESC button to navigate back to the previous menu. • Push the MENU button to close all menus. • Make another control selection (removes the current chart format). 5th Edition 4 April 07 3-7 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System SET DAY OR NIGHT COLOR CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the CHART DIMMING line item. 2 Push the PUSH SELECT button or turn the DATA knob on the CCP. EXIT CHART MAIN INDEX CHECKLIST: 1 Push the MENU or ESC button on the CCP to exit the CHART MAIN INDEX and show the E-Chart that was previously in view. 5th Edition 3-8 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts CHART TYPE MENU SUMMARY: The Chart Type menu is accessed via the ANY CHART selection on the CHART MAIN INDEX. The Chart Type menu shows a list of the chart types available for the selected airport. Selecting an item from the list causes the Chart List menu to come into view. The Chart List menu shows a list of the charts that are available of the selected type (e.g., APPROACH) for selected airport. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the ANY CHART shortcut for the desired ORIGIN, DESTINATION, ALTERNATE, or OTHER AIRPORT. 2 Push and hold the PUSH SELECT button on the CCP to select the Chart Type menu. Only necessary if shortcut contains Chart. SELECT CHART TYPE CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired chart type. 2 Push the PUSH SELECT button on the CCP to select the chart type. 5th Edition 4 April 07 3-9 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System EXIT CHART TYPE CHECKLIST: 1 To exit the Chart Type menu, do either of the steps that follow: • Push the MENU button on the CCP to show the chart that was previously in view. • Push the ESC button on the CCP to show the CHART MAIN INDEX. 5th Edition 3-10 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts CHART LIST SUMMARY: The Chart List is accessed via the Display Chart or the CHART MAIN INDEX or Chart Type menus. The Chart List shows a list of charts of the selected type (e.g., APPROACH) for the selected airport. When a chart is selected via the Display Chart method, the newly selected chart comes into view on the MFD. When a chart is selected, the associated shortcut on the CHART MAIN INDEX is updated to the new selection. CHECKLIST: 1 To display the Chart List, select Via Display Chart, Via Chart Main Index, or the Via Chart Type menu checklist. VIA DISPLAY CHART PRECONDITIONS: A chart must be in view on the MFD. Refer to the figure on page 10-9. CHECKLIST: 1 With an E-Chart in view, push the PUSH SELECT button on the CCP to display the Chart List. VIA CHART MAIN INDEX PRECONDITIONS: The CHART MAIN INDEX should be in view on the MFD. Refer to the figure on page 10-5. 5th Edition 4 April 07 3-11 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired chart type (e.g., DEPARTURE) for the origin or destination airport. 2 Push and hold the PUSH SELECT button on the CCP. 3 To select a chart from the Chart List, push the PUSH SELECT button on the CCP. VIA CHART TYPE MENU PRECONDITIONS: The Chart Type menu should be in view on the MFD. Refer to the figure on page 10-7. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired chart type (e.g., DEPARTURE). 2 Push the PUSH SELECT button on the CCP. 3 To select a chart from the Chart Type menu, push the PUSH SELECT button on the CCP. SELECT A CHART FROM THE CHART LIST SUMMARY: Selecting a chart displays the chart on the MFD and updates the associated shortcut control on the Chart Main Index. 5th Edition 3-12 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired chart. N NOTE When more than one page of charts is available, the MORE CHARTS and PREVIOUS CHARTS selections are available along the top and bottom of the menu list. 1.1 Turn the MENU ADV knob on the CCP to position the menu cursor around the MORE CHARTS or PREVIOUS CHARTS control. 1.2 Push the PUSH SELECT button on the CCP to select the next page or previous page of charts. 2 Push the PUSH SELECT button on the CCP to select the chart. EXIT CHART LIST CHECKLIST: 1 Push the MENU or ESC button on the CCP to exit the Chart List and show the chart previously in view. 5th Edition 4 April 07 3-13 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 E-Charts Integrated Flight Information System NOTAMS MENU SUMMARY: The NOTAMS menu is accessed from the Chart Main Index. The CHART NOTAMS menu shows the Chart NOTAMs available for the selected airport. The page is broken into two fields, the NOTAM summary and NOTAM details. When more than one NOTAM is available for the selected airport, the selected NOTAM and total number of NOTAMs shows in the summary field. The selected NOTAM readout is also a data entry field that allows the user to select another NOTAM for viewing. The NOTAM type, effectivity, begin date and end date show in the summery field. The NOTAM text, as defined in the Jeppesen charts database, shows in the details field. CHECKLIST: 1 With the CHART MAIN INDEX in view, turn the MENU ADV knob on the CCP to position the menu cursor around the CHART NOTAMS shortcut for the desired airport (e.g., ORIGIN, DESTINATION, ALTERNATE, or OTHER AIRPORT). 2 Push the PUSH SELECT button on the CCP. SELECT A NOTAM CHECKLIST: 1 Turn the DATA knob on the CCP to select the desired NOTAM. TECH DETAIL When the NOTAM page is in view and there is more than one NOTAM, the cursor is automatically positioned on the NOTAM number. 5th Edition 3-14 4 April 07 IFIS-5000 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) Integrated Flight Information System E-Charts 2 If the NOTAM exceeds the available space in the NOTAM details field, the NOTAM shows over multiple pages. To page up or down: 2.1 Turn the MENU ADV knob on the CCP to position the cursor window around the NOTAM page number. 2.2 Turn the DATA knob clockwise to increase the page number and counterclockwise to decrease the page number. EXIT NOTAMS PAGE CHECKLIST: 1 Do either of the steps that follow to exit from the NOTAMS page: • Push the ESC button on the CCP to exit the NOTAM page and show the CHART MAIN INDEX. • Push the MENU button on the CCP to exit the NOTAM page and show the Display Chart format. 5th Edition 4 April 07 3-15 E-Charts Operation (AFD-3010E, AFD-5220E, AFD-3320) IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition 3-16 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Table of Contents TABLE OF CONTENTS Title Page Graphical Weather (GWX-5000) ...................................................... 4-1 Display Last GWX Image (AFD-3010E) ....................................... 4-3 Select New GWX Image (AFD-3010E) ......................................... 4-3 Graphical Weather (GWX-3000 and GWX-3001) ............................. 4-5 Display Last GWX Image (AFD-3010E) ....................................... 4-6 Display New GWX Image or Text Weather (AFD-3010E) ............. 4-7 Select TAF/METAR Report ........................................................ 4-8 Select SIGMET/AIRMET Report ............................................... 4-9 Select ANIMATED NEXRAD (-105, -106) ............................... 4-10 Select WINDS ALOFT (-108) .................................................. 4-12 Select SATELLITE (-108) ........................................................ 4-12 Select GWX Image Overlay .................................................... 4-13 Select GWX Image Overlay (-108) .......................................... 4-14 Map Displays (AFD-3010E) ............................................................ 4-16 Map Display Options .................................................................. 4-17 Map Display Options (-108) ........................................................ 4-18 Chart Subscription Page (AFD-3010E) .......................................... 4-22 Enter Subscription Number ......................................................... 4-23 Add a Region .............................................................................. 4-25 Database Effectivity (AFD-3010E) .................................................. 4-27 View Database Details ................................................................ 4-29 File Server Configuration (AFD-3010E) ......................................... 4-30 Update Purchased Options ......................................................... 4-31 MDC Diagnostics (AFD-3010E) ..................................................... 4-32 Checklists ....................................................................................... 4-35 Load Checklist (AFD-3010E) ...................................................... 4-35 Display Checklist (AFD-3010E) .................................................. 4-37 Checklist Operation ................................................................. 4-39 5th Edition 4 April 07 i IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Integrated Flight Information System This page intentionally left blank 5th Edition ii 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-5000) IFIS-5000 Display Operation (AFD-3010E) GRAPHICAL WEATHER (GWX-5000) RATIONALE: The Graphical Weather (GWX-5000) function allows the flight crew to view graphical weather images on the MFD. The GWX function also allows the flight crew to overlay the NEXRAD image on the Plan Map. SUMMARY: The GWX format provides the ability to show one stored GWX image at a time on the MFD. The GWX images are uplinked via VHF datalink system from the Information Service Provider (Universal Weather). New GWX images are requested by the flight crew via controls on the CDU (refer to the Rockwell Collins Corporate Datalink System CMU-4000/RIU-40X0 operator’s guide, CPN 523-0790499, for more information on requesting weather images). A list of saved and available GWX images shows on the MFD when requested by the flight crew. Using controls on the CCP, the flight crew selects the desired GWX image to show on the MFD. PRECONDITIONS: To determine which version of Graphical Weather is installed, go to the FILE SERVER CONFIGURATION page (FSU CONFIGURATION page). To access the FSU CONFIGURATION page refer to the FSU configuration page on page 4-30. The Universal Weather installation is designated GWX-5000. The databases associated with Graphical Weather must be loaded into the FSU before the system is functional. Make sure all pertinent information (subscription numbers, access codes, etc.) is available before attempting to install databases. Refer to the Support Information chapter of this guide for information on how to contact Jeppesen and Rockwell Collins Customer Support. Refer to the CPAS-3000 Data Loader Operator’s Guide (CPN 523-0790386) or the DBU-5000 Data Base Unit Operator’s Guide (CPN 523-0808703) for information on how to load a database. 5th Edition 4 April 07 4-1 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-5000) Integrated Flight Information System CHECKLIST: 1 To view a GWX image, follow either the Display Last GWX Image checklist on page 4-3 or the Select New GWX Image checklist that starts on page 4-3. 5th Edition 4-2 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-5000) DISPLAY LAST GWX IMAGE (AFD-3010E) SUMMARY: The display last GWX image function allows the flight crew to select the GWX display format with the last viewed GWX image in view on the MFD. CHECKLIST: 1 Push the lower format line select key on the MFD to display the lower display FORMAT list. TECH DETAIL The complete list of possible lower MFD formats, in order, is ROSE, ARC, PPOS (Present Position Map), PLAN (Plan Map), GWX, and TCAS (TCAS Only), depending on the installed options. 2 Push the FORMAT line select key as necessary to cycle the display to the next available format until GWX is selected. The GWX image that shows on the MFD when the GWX format is selected is the last displayed GWX image. SELECT NEW GWX IMAGE (AFD-3010E) SUMMARY: The select GWX image function allows the flight crew to select from a list of available images a particular GWX image to be displayed on the MFD when the GWX format is selected. The GWX format must be selected on the MFD first. The image list format on the AFD-3010E and the AFD-5220E are similar. The illustration below shows the AFD-3010E. The list of available images includes: • NEXRAD • TOPS/MOVEMENT • WINDS ALOFT • ICING 5th Edition 4 April 07 4-3 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-5000) Integrated Flight Information System • WX DEPICTION • TURBULENCE. CHECKLIST: 1 Push the lower format line select key on the MFD to select the lower display FORMAT list. 2 Push the FORMAT line select key as necessary to cycle the display to the next available format until GWX is selected. The GWX image that shows on the MFD when the GWX format is selected is the last displayed GWX image. 3 Push the MENU button on the CCP to display the list of available GWX images. 4 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired list item. Turning the knob clockwise moves the cursor down the page; turning the knob counterclockwise moves the cursor up the page. N NOTE The menu cursor is initially placed at the top list item. When a new linked image is received, the menu cursor is moved automatically to the new list item. N NOTE When more than one page of images is available, a MORE IMAGES and PREVIOUS IMAGES selection is available on the menu. 4.1 Turn the MENU ADV knob on the CCP to position the menu cursor around the MORE IMAGES or PREVIOUS IMAGES control. 5th Edition 4-4 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) 4.2 Push the PUSH SELECT button on the CCP to display the next or previous page with the list of available images. 5 Push the PUSH SELECT button on the CCP to select the highlighted list item. POST CONDITIONS: When the image has been selected from the GWX image list, the selected image is in view on the MFD. GRAPHICAL WEATHER (GWX-3000 AND GWX-3001) RATIONALE: The Graphical Weather (GWX-3000 & GWX-3001) function allows the flight crew to view graphical weather images and textual weather reports on the MFD. The GWX function also allows the flight crew to overlay the NEXRAD image on the Plan Map. SUMMARY: The GWX format provides the ability to show GWX images or reports on the MFD. The GWX images/reports are provided by Baron Services via a satellite Information Service Provider (XM Satellite Weather Service). Using controls on the CCP, the flight crew selects the desired GWX images or reports to show on the MFD. PRECONDITIONS: To determine which version of graphical weather is installed, go to the FILE SERVER CONFIGURATION page (FSU CONFIGURATION page). To access the FSU CONFIGURATION page refer to File Server Configuration on page 4-30. The XM weather installation is designated GWX-3000, or GWX-3001 depending on the software version. The databases associated with Graphical Weather must be loaded into the FSU before the system is functional. Make sure all pertinent information (subscription numbers, access codes, etc.) is available before attempting to install databases. Refer to the Support Information 5th Edition 4 April 07 4-5 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-3000 and GWX-3001) Integrated Flight Information System chapter of this guide for information on how to contact Jeppesen and Rockwell Collins Customer Support. Refer to the CPAS-3000 Data Loader Operator’s Guide (CPN 523-0790386) or the DBU-5000 Data Base Unit Operator’s Guide (CPN 523-0808703) for information on how to load a database. CHECKLIST: 1 To view a GWX image, follow either the Display Last GWX Image checklist on page 4-6 or the Select New GWX Image checklist that starts on page 4-7. DISPLAY LAST GWX IMAGE (AFD-3010E) SUMMARY: The display GWX image function, for the AFD-3010E and AFD-5220E, allows the flight crew to select the GWX display format with the last viewed GWX image in view on the MFD. CHECKLIST: 1 Push the lower format line select key on the MFD to select the lower display FORMAT list. TECH DETAIL The complete list of possible lower MFD formats, in order, is ROSE, ARC, PPOS (Present Position Map), PLAN (Plan Map), GWX, and TCAS (TCAS Only), depending on the installed options. 2 Push the FORMAT line select key as necessary to cycle the display to the next available format until GWX is selected. The GWX image that shows on the MFD when the GWX format is selected is the last displayed GWX image. 5th Edition 4-6 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) DISPLAY NEW GWX IMAGE OR TEXT WEATHER (AFD-3010E) SUMMARY: The GRAPHICAL WEATHER menu allows the flight crew to select a new GWX image or textual weather for display on the MFD when the GWX format is selected (AFD-3010E and AFD-5220E). The available menu items include: • TAF (text) • METAR (text) • SIGMET (text) • AIRMET (text) • Animated NEXRAD (-105, -106, -108) • Winds Aloft (-108) • Satellite (-108) • Overlay Selections (-108) • NEXRAD overlay • Echo Tops overlay • METAR overlay • Airport Idents overlay • SIGMETS overlay • A/C Flight Information (-105, -106, -108). CHECKLIST: 1 Push the FORMAT line select key R1 on the MFD to select the lower display format list. 2 Push the FORMAT line select key as necessary to cycle the display to the next available format until GWX is selected. The GWX image that shows on the MFD when the GWX format is selected is the last GWX image that was in view. 3 Push the MENU button on the CCP to show the GRAPHICAL WEATHER menu on the MFD. 5th Edition 4 April 07 4-7 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-3000 and GWX-3001) Integrated Flight Information System 4 Follow the steps of the appropriate checklist to select the desired image or text for display on the MFD. • Select TAF/METAR Report checklist on page 4-8 to display a textual TAF or METAR report. • Select SIGMET/AIRMET Report checklist on page 4-9 to display a textual SIGMET or AIRMET report. • Select ANIMATED NEXRAD checklist on page 4-10 to display animated NEXRAD images (-105, -106, -108). • Select GWX Image Overlay checklist on page 4-13 (-103, -104, -105, -106) or page 4-14 (-108) to display one of the GWX overlays. • Select WINDS ALOFT checklist on page 4-12 to display the WINDS ALOFT image (-108). • Select SATELLITE checklist on page 4-12 to display the SATELLITE image (-108). 5 Push the PUSH SELECT button on the CCP to select the highlighted list item. POST CONDITIONS: When the image/report has been selected from the appropriate menu, the selected image or report is in view on the MFD. SELECT TAF/METAR REPORT SUMMARY: The GRAPHICAL WEATHER menu displays TAF/METAR REPORTS menu selections for the ORIGIN, DESTINATION, ALTERNATE, and OTHER airports. When an airport is selected, a list of TAF and METAR reports available for that airport shows, listed in order of most recent to oldest. Selecting a TAF or METAR displays that report on a submenu page on the MFD. 5th Edition 4-8 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) PRECONDITIONS: The checklist that follows begins on the GRAPHICAL WEATHER menu page on the MFD: CHECKLIST: 1 Turn the MENU ADV knob to position the cursor around the airport selection under the TAF/METAR REPORTS menu title for which TAF/METAR reports are desired. N NOTE The airport IDs (DESTINATION, ALTERNATE) are supplied by the FMS and are based on the active flight plan. The identifier of the OTHER airport shows as dashes to indicate an airport may be entered by the flight crew. Refer to the Search for Airport checklist on page 3-4 for details on how to enter an airport ID into the data field. 2 Push the PUSH SELECT button on the CCP to show the appropriate airport page with the list of METAR reports for that airport. 3 Turn the DATA knob on the CCP to select the TAF reports page with the current TAF for that airport. SELECT SIGMET/AIRMET REPORT SUMMARY: The GRAPHICAL WEATHER menu displays NATIONAL MET REPORT menu selections for SIGMET and AIRMET reports. When a report type is selected, a list of either SIGMET or AIRMET reports shows. SIGMET reports are listed in alphabetical order by identifier. AIRMET reports are listed in the order they are received. Selecting a SIGMET or AIRMET displays that report on a submenu page on the MFD. 5th Edition 4 April 07 4-9 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-3000 and GWX-3001) Integrated Flight Information System PRECONDITIONS: The checklist that follows begins on the GRAPHICAL WEATHER menu page on the MFD: CHECKLIST: 1 Turn the MENU ADV knob to position the cursor around either the SIGMET or AIRMET selection under the NATIONAL MET REPORTS menu listing. 2 Push the PUSH SELECT button on the CCP to show the appropriate reports page. N NOTE If more than one report is available, the current page number and the total number of pages shows at the top on the menu list. The reports are ordered from most recent to oldest. TECH DETAIL A maximum of 50 active SIGMET reports and 75 active AIRMET reports can be presented. 3 When more than one SIGMET or AIRMET report is available, turn the DATA knob to view all reports. Each turn of the DATA knob selects the next report page. SELECT ANIMATED NEXRAD (-105, -106) SUMMARY: The animated NEXRAD state allows the flight crew to view a time elapsed sequence of weather images. The sequence of images runs in a loop using a minimum of three to a maximum of five valid NEXRAD images received from the datalink. The loop sequence runs until canceled. During normal operation, the system stores a snap shot of the NEXRAD and associated time stamp, every 15 minutes or greater, 5th Edition 4-10 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) as soon as the images become available. A maximum of five snap shots are stored. When ANIMATED NEXRAD mode is selected, the stored snapshots are in view as a series of frames in time sequence (oldest first), with a 0.7 second interval between each frame. CHECKLIST: 1 Push the FORMAT line select key R1 to show the lower display format list and to select the GWX display format. 2 Push the MENU button on the CCP to show the GRAPHICAL WEATHER menu on the MFD. 3 Turn the MENU ADV knob to position the cursor around the ANIMATED NEXRAD selection. N NOTE The menu cursor indicator skips over the ANIMATED NEXRAD selection when there are not enough images to animate. The message ACQUIRING IMAGES is in view in the ANIMATED NEXRAD selection box on the GRAPHICAL WEATHER menu when not enough images are available to animate. The message AVAILABLE is in view in the ANIMATED NEXRAD selection box on the GRAPHICAL WEATHER menu when there are enough images available to animate. 4 Push the PUSH SELECT button on the CCP to show the animated NEXRAD. 5 To exit the NEXRAD FORMAT, do any of the items that follow: • Push the MENU button on the CCP. • Select another display format on the MFD. 5th Edition 4 April 07 4-11 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-3000 and GWX-3001) Integrated Flight Information System SELECT WINDS ALOFT (-108) SUMMARY: The Winds Aloft feature displays wind speed and direction from the surface to 42 000 ft. in 3,000 ft. increments. The Winds Aloft data helps select optimized operating altitudes based on flight objectives. Flight crews benefit from graphic depictions of the actual temperature and direction of winds aloft to better determine the effect on aircraft performance, fuel loads, and arrival times. CHECKLIST: 1 Push the FORMAT line select key R1 to show the lower display format list and to select the GWX display format. 2 Push the MENU button on the CCP to show the GRAPHICAL WEATHER menu on the MFD. 3 Turn the MENU ADV knob to position the focus indicator around the WINDS ALOFT selection. 4 Push the PUSH SELECT button on the CCP to show the WINDS ALOFT. 5 To exit the WINDS ALOFT, do any of the item that follow: • Push the MENU button on the CCP. • Select another display format on the MFD. SELECT SATELLITE (-108) SUMMARY: The infrared composite satellite image shows cloud layers from 5,000 ft. to 40 000 ft. in 5,000 ft. increments. High resolution NEXRAD can be displayed to show areas of various levels of precipitation. The 5th Edition 4-12 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) composite image provides the user with an around-the-clock tool to assess the flight conditions in turbulent day and night weather. CHECKLIST: 1 Push the FORMAT line select key R1 to show the lower display format list and to select the GWX display format. 2 Push the MENU button on the CCP to show the GRAPHICAL WEATHER menu on the MFD. 3 Turn the MENU ADV knob to position the focus indicator around the SATELLITE. 4 Push the PUSH SELECT button on the CCP to show the SATELLITE. 5 To exit the SATELLITE, do any of the items that follow: • Push the MENU button on the CCP. • Select another display format on the MFD. SELECT GWX IMAGE OVERLAY SUMMARY: The GRAPHICAL WEATHER menu shows a list of overlays that are available to be displayed on the MFD when the GWX format is selected. PRECONDITIONS: The checklist that follows begins on the GRAPHICAL WEATHER menu page on the MFD: 5th Edition 4 April 07 4-13 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Graphical Weather (GWX-3000 and GWX-3001) Integrated Flight Information System CHECKLIST: 1 Turn the MENU ADV knob to position the cursor around the overlay selection under the OVERLAYS menu list. 1.1 To view the overview legends, turn the MENU ADV knob to the OVERLAY LEGENDS selection item on the GRAPHICAL WEATHER menu page. 1.2 Push the PUSH SELECT button to the display the OVERLAY LEGENDS page on the MFD. The OVERLAY LEGENDS page shows all the symbology used on the overlays to assist the operator with interpreting the information that shows on the overlay. 1.3 To exit the OVERLAY LEGENDS page, push the ESC button on the CCP. 2 With the cursor positioned on the overlay selection, push the PUSH SELECT button on the CCP to turn the selected overlay ON or OFF. SELECT GWX IMAGE OVERLAY (-108) SUMMARY: The OVERLAY SELECTIONS menu shows a list of overlays that are available to be displayed on the MFD when the GWX format is selected. PRECONDITIONS: The checklist that follows begins on the GRAPHICAL WEATHER menu page on the MFD: 5th Edition 4-14 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Graphical Weather (GWX-3000 and GWX-3001) CHECKLIST: 1 Turn the MENU ADV knob to position the cursor around the OVERLAY SELECTIONS. 2 Push the PUSH SELECT button on the CCP. The OVERLAY SELECTIONS page shows all of the overlays that are available for selection. 3 With the cursor positioned on the overlay selection, push the PUSH SELECT button on the CCP to turn the selected overlay ON or OFF. 3.1 To view the overview legends, turn the MENU ADV knob to the OVERLAY LEGENDS selection item on the GRAPHICAL WEATHER menu page. 3.2 Push the PUSH SELECT button to the display the OVERLAY LEGENDS page on the MFD. The OVERLAY LEGENDS page shows all the symbology used on the overlays to assist the operator with interpreting the information that shows on the overlay. N NOTE The OVERLAY LEGENDS page does not show the orange lightning strike overlay icon. 3.3 To exit the OVERLAY LEGENDS page, push the ESC button on the CCP. 5th Edition 4 April 07 4-15 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Map Displays (AFD-3010E) Integrated Flight Information System MAP DISPLAYS (AFD-3010E) RATIONALE: The Map Displays allow the flight crew to graphically view the route of flight to help maintain situational awareness. SUMMARY: An FMS Present Position (PPOS) Map, FMS Plan (PLAN) Map, and optionally an FMS Three-Dimensional (3D) Map format are available to the flight crew. The FMS Present Position (PPOS) Map is a heading-up present position moving map. The FMS Plan (PLAN) Map is a fixed stationary map oriented to true-north. The optional 3D Map is a combined lateral vertical map with an selectable viewing angle. The map formats graphically depict the active FMS flight plan. The PPOS Map and PLAN Map also show FMS-supplied map background symbology such as navaids, intersections, and airports. The IFIS system adds additional background symbology to the PPOS and PLAN Maps. The available background symbology includes geopolitical data, airways, Temporary Flight Restriction (TFR) (-108), and airspace. NEXRAD images can be overlaid on the Plan Map format. PRECONDITIONS: The databases associated with E-Map symbology must be loaded into the FSU before the system is functional. The GWX database must be loaded before NEXRAD images are added to the map display. Make sure all pertinent information (e.g., subscription numbers, access codes, etc.) is available before attempting to install databases. Refer to the Support Information chapter of this guide for information on how to contact Jeppesen and Rockwell Collins Customer Support. Refer to the CPAS-3000 Data Loader Operator’s Guide (CPN 523-0790386) or the DBU-5000 Data Base Unit Operator’s Guide (CPN 523-0808703) for information on how to load a database. Both map formats require that a flight plan be entered into the FMS. CHECKLIST: 1 Push the lower format line select key on the MFD to select the lower display FORMAT list. 5th Edition 4-16 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Map Displays (AFD-3010E) 2 Push the FORMAT line select key as necessary to select the desired map format (PPOS or PLAN). Each push of the FORMAT line select key selects the next format option in the list. TECH DETAIL The complete list of possible lower MFD formats, in order, are ROSE, ARC, PPOS (Present Position Map), PLAN (Plan Map), GWX, and TCAS (TCAS only), depending on the installed options. 3 Follow the MAP DISPLAY OPTION checklist to turn display options on and off. 4 To exit either the PPOS or PLAN Map, select a different lower display format. MAP DISPLAY OPTIONS SUMMARY: The MAP menu contains controls for the E-Maps and the map source. The MAP menu allows the flight crew to turn various map display options, such as geopolitical boundaries or airways, on and off. Line select keys on the MFD are used to control the display options when the MAP menu is in view. CHECKLIST: 1 Push the MENU button on the CCP to show the MAP menu on the MFD. 2 Push a line select key on the MFD to select or deselect a display option as follows: 5th Edition 4 April 07 4-17 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Map Displays (AFD-3010E) Integrated Flight Information System • The GEO-POL selection is used to select the display of geopolitical boundaries. Each push of the GEO-POL line select key toggles the next option (ON or OFF). • The AIRSPACE selection is used to select the display of controlled and restricted airspace. Each push of the AIRSPACE key toggles the next option (ON or OFF). • The AIRWAYS selection is used to select the display of airways. Each push of the AIRWAYS key toggles the next option (HI, LO, or OFF). N NOTE The DATA knob on the CCP can also be used to control map display options. With the cursor on the desired selection (GEO-POL, AIRWAYS, AIRSPACE), turn the DATA knob to toggle the next selection. 3 Push the FMS source line select key to select the map source (FMS1 or FMS2). 4 If GWX format is selected, the Plan Map menu adds a GWX ON OFF item. MAP DISPLAY OPTIONS (-108) SUMMARY: The MAP MENU allows the flight crew to select the information that is displayed on the PPOS and Plan Map formats. The menu includes map source control and the following IFIS products when the E-Maps key is enabled: Geo-political features, Airspace, Airways, TFRs, and USA NEXRAD. Additional information can be displayed such as: Navaids, Airports, Intersections, and Altitudes depending on the FMS type. The Temporary Flight Restriction (TFR) graphical and textual information provides a complete picture of the airspace environment that can change on short notice. The additional airspace information is helpful when deviating from a planned flight path to avoid entering hazardous 5th Edition 4-18 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Map Displays (AFD-3010E) or restricted airspace. The TFR TEXT REPORT is accessed through the MAP MENU. The individual TFR selections are available to help determine restriction information for each TFR airspace. CHECKLIST: 1 Push the MENU button on the CCP to show the MAP MENU on the MFD. 2 Rotate the CCP MENU ADV knob to move the cyan focus indicator up or down to select or deselect a display option as follows: N NOTE The state of the highlighted item is changed by rotating the CCP DATA knob or pushing the CCP PUSH-SELECT button. • The GEO-POL selection is used to select the display of geopolitical boundaries. Each push of the GEO-POL line select key toggles the next option (ON or OFF). • The AIRSPACE selection is used to select the display of controlled and restricted airspace. Each push of the AIRSPACE key toggles the next option (ON or OFF). • The TFR selection is used to select the display of Temporary Flight Restriction airspace. Each push of the key toggles the next option (ON or OFF). • The AIRWAYS selection is used to select the display of airways. Each push of the AIRWAYS key toggles the next option (HI, LO, or OFF). • The NAVAIDS selection is used to select the display of NAVAIDS. Each push of the key toggles the next option (ON or OFF). • The AIRPORTS selection is used to select the display of AIRPORTS. Each push of the key toggles the next option (ON or OFF). 5th Edition 4 April 07 4-19 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Map Displays (AFD-3010E) Integrated Flight Information System • The INTERSECTIONS selection is used to select the display of navigation INTERSECTIONS. Each push of the key toggles the next option (ON or OFF). • The ALTITUDES selection is used to select the display of airway ALTITUDES. Each push of the key toggles the next option (ON or OFF). • The TFR TEXT REPORT LIST is used to select the display of the TFR TEXT REPORT LIST menu. N NOTE The DATA knob on the CCP can also be used to control map display options. With the cursor on the desired selection, turn the DATA knob to toggle the next selection. 3 Push the FMS source line select key to select the map source (FMS1 or FMS2). 4 If GWX format is selected, the Plan MAP MENU adds a GWX ON OFF item. 5 Turn the DATA knob to move the cursor to the TFR selection to toggle the TFR airspace (ON or OFF). N NOTE Graphical TFR information is available for display below the 100 NM range on the PPOS and PLAN Maps. 6 Turn the DATA knob to move the cursor to the TFR TEXT REPORT LIST on the MAP MENU to display the TFR TEXT REPORT LIST menu. 7 Turn the DATA knob to move the cursor to a TFR for viewing. 8 Push the PUSH SELECT button on the CCP to display the TFR text report. 5th Edition 4-20 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Map Displays (AFD-3010E) 9 Push the ESC button on the CCP to return to the TFR TEXT REPORT LIST menu. 5th Edition 4 April 07 4-21 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Chart Subscription Page (AFD-3010E) Integrated Flight Information System CHART SUBSCRIPTION PAGE (AFD-3010E) RATIONALE: The Chart Subscription page allows the flight crew or maintenance personnel to enter information to change the chart region coverage of the database. SUMMARY: The Chart Subscription page contains a data entry field, a list of enabled regions, and an ADD REGIONS data entry field. Regions are added to the list by entering temporary access codes. Up to seven temporary access codes can be entered. Both the subscription number and access codes are obtained from Jeppesen (refer to page 11-3 for contact information). PRECONDITIONS: The databases associated with E-Charts must be loaded into the FSU before the system is functional. Make sure all pertinent information (e.g., subscription numbers, access codes, etc.) is available before attempting to install databases. Refer to the Support Information chapter of this guide for information on how to contact Jeppesen and Rockwell Collins Customer Support. Refer to the CPAS-3000 Data Loader Operator’s Guide (CPN 523-0790386) or the DBU-5000 Data Base Unit Operator’s Guide (CPN 523-0808703) for information on how to load a database. RULES: • The chart subscription number can only be modified on the ground. • Jeppesen will need the subscription number when temporary access codes are requested. CHECKLIST: 1 Push the STAT button on the CCP to display the STAT MENU on the MFD. N NOTE In some installations, pushing the STAT button brings up the last selected status format. With a status format in view, push the MENU button on the CCP to show the STAT MENU. 5th Edition 4-22 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Chart Subscription Page (AFD-3010E) TECH DETAIL The STAT MENU is automatically removed from the display after 10 seconds of no activity. 2 Turn the MENU ADV knob on the CCP to position the cursor around the CHART SUBSCRIPTION list item. 3 Push the PUSH SELECT button on the CCP to select the CHART SUBSCRIPTION page. 4 Follow the steps of either the Enter Subscription Number or the Add a Region checklists as appropriate to enter the Jeppesen subscription number or add regions to the chart coverage. 5 To exit the CHART SUBSCRIPTION page, select another display format on the MFD. N NOTE In some installations, operation of the STAT button removes the current status format from display, returning the display to the last normal format. ENTER SUBSCRIPTION NUMBER SUMMARY: On the Chart Subscription page, the SUBSCRIPTION NUMBER data entry field is used to enter the Jeppesen subscription serial number. This operation is only available when the aircraft is on the ground. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the subscription number. 5th Edition 4 April 07 4-23 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Chart Subscription Page (AFD-3010E) Integrated Flight Information System 2 Push and hold the PUSH SELECT button on the CCP to activate the text entry cursor and to position the cursor around the first character of the entry field. 3 Turn the DATA knob on the CCP to change the character. 4 Turn the MENU ADV knob to move the cursor to the next character field. 5 Repeat steps 3 and 4 as required to enter all the characters of the subscription number. 6 Do either of the steps that follow to terminate the data entry mode: 6.1 Push the PUSH SELECT button on the CCP to finish entering the subscription number and have the system process the information. N NOTE Entering or changing a subscription number can take up to two minutes to process. 6.2 Push the ESC button to cancel data entry mode and keep the previous value. N NOTE Operation of the ESC button on the CCP or removal of the menu due to another control selection will abort the data entry without processing the value. When a data entry abort occurs, the subscription serial number is either returned to the previous value or to zeros if no previous value is available. 7 To exit the CHART SUBSCRIPTION page, select another display format on the MFD. 5th Edition 4-24 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Chart Subscription Page (AFD-3010E) ADD A REGION RATIONALE: The ADD REGIONS field on the CHART SUBSCRIPTION page is used to expand the current region coverage. SUMMARY: Additional regions are added to the list of regions by entering temporary access codes. When the access code has been validated by the system, the menu cursor automatically moves to the next data entry line and further selection of data entry mode for the previous item is inhibited until the data entry fields are cleared. The data entry fields are cleared when the CHART SUBSCRIPTION page is exited. Clearing the data entry fields does not remove the associated region from the subscription database; it just clears the access codes from the menu. PRECONDITIONS: Contact Jeppesen to purchase a temporary access code for a region that is not in the current region coverage. Use this temporary access code until a new disk arrives from Jeppesen. The new disk will contain the expanded coverage and the temporary access code will no longer be needed. RULES: If a temporary access code for a region is needed only until the next disk update, as requested by the customer, access to that region is denied after the next disk update. Similarly, the old temporary access code only works with a specific cycle of Jeppesen database. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the access code. 2 Push the PUSH SELECT button on the CCP to activate the text entry cursor and to position the cursor around the first character of the entry field. 3 Turn the DATA knob on the CCP to change the character. 5th Edition 4 April 07 4-25 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Chart Subscription Page (AFD-3010E) Integrated Flight Information System 4 Turn the MENU ADV knob to move the cursor to the next character field. 5 Do either of the steps that follow to terminate the data entry mode: 5.1 Push the PUSH SELECT button on the CCP to finish entering the access code and have the system process the information. 5.2 Push the ESC button to cancel data entry mode and keep the previous value. 6 To exit the CHART SUBSCRIPTION page, select another display format on the MFD. 5th Edition 4-26 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Database Effectivity (AFD-3010E) DATABASE EFFECTIVITY (AFD-3010E) RATIONALE: The DATABASE EFFECTIVITY page provides the aircraft operator with a means to assess the currentness of the installed databases. SUMMARY: A list of the installed databases shows on the DATABASE EFFECTIVITY page. The list includes the name, begin date, end date, and status (current or not current) for enabled databases. The DATABASE EFFECTIVITY page is also used to navigate between the installed databases and to provide specific information regarding the installed databases. The MFD shows database information from the same side File Server Unit (FSU). In the event of a dual FSU installation, the left MFD shows data from the left FSU and the right MFD shows data from the right FSU. CHECKLIST: 1 Push the STAT button on the CCP to display the STAT MENU on the MFD. N NOTE In some installations, operation of the STAT button brings up the last selected status format. With a status format in view, push the MENU button on the CCP to display the STAT MENU. N NOTE When the STAT MENU is in view, the cursor should be automatically positioned on the DATABASE EFFECTIVITY list item. If for some reason it is not, turn the MENU ADV knob until the cursor is on the DATABASE EFFECTIVITY list item. TECH DETAIL The STAT MENU is automatically removed from the display after 10 seconds of no activity. 5th Edition 4 April 07 4-27 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 Database Effectivity (AFD-3010E) Integrated Flight Information System 2 Push the PUSH SELECT button on the CCP to select the DATABASE EFFECTIVITY page. 3 To exit the DATABASE EFFECTIVITY page, select another display format on the MFD. N NOTE In some installations, pushing the STAT button removes the current status format from display, returning the display to the last normal format. 5th Edition 4-28 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System Database Effectivity (AFD-3010E) VIEW DATABASE DETAILS SUMMARY: The database details window provides additional information regarding the selected database. Various databases provide different levels of detail information in the detail window. Most provide regional coverage information. Other databases provide additional information such as subscriber name, etc. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the desired database. 2 Push the PUSH SELECT button on the CCP. 3 To exit the DATABASE EFFECTIVITY page, select another display format on the MFD. 5th Edition 4 April 07 4-29 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 File Server Configuration (AFD-3010E) Integrated Flight Information System FILE SERVER CONFIGURATION (AFD-3010E) RATIONALE: The FILE SERVER CONFIGURATION page shows information on the software applications available to the user and the current status of these options. SUMMARY: A list of all applications contained within the FSU shows on the FILE SERVER CONFIGURATION page (FSU CONFIGURATION page). The list includes the priced option type number, part number, priced option description, and status information for each priced option. The FSU CONFIGURATION page is also used to update purchased options. CHECKLIST: 1 Push the STAT button on the CCP to display the STAT MENU on the MFD. N NOTE In some installations, operation of the STAT button brings up the last selected status format. With a status format in view, push the MENU button on the CCP to display the STAT MENU. 2 Turn the MENU ADV knob to position the menu cursor around FILE SERVER CONFIGURATION in the STAT MENU. 3 Push the PUSH SELECT button to show the FILE SERVER CONFIGURATION page. 4 Select another display format on the MFD to exit the FILE SERVER CONFIGURATION page. 5th Edition 4-30 4 April 07 IFIS-5000 IFIS-5000 Display Operation (AFD-3010E) Integrated Flight Information System File Server Configuration (AFD-3010E) UPDATE PURCHASED OPTIONS RULES: Encrypted Application Keys (EAK) can only be entered while the system is on the ground. CHECKLIST: 1 Turn the MENU ADV knob on the CCP to position the menu cursor around the subscription number. 2 Push the PUSH SELECT button on the CCP to activate the text entry cursor and to position the cursor around the first character of the entry field. 3 Turn the DATA knob on the CCP to change the character. 4 Turn the MENU ADV knob to move the cursor to the next character field. 5 Repeat steps 3 and 4 as required to enter all the characters of the EAK. 6 Do either of the steps that follow to terminate the data entry mode: • Push the PUSH SELECT button on the CCP to finish entering the EAK number and have the system process the information. • Push the ESC button to cancel data entry mode and keep the previous value. 5th Edition 4 April 07 4-31 IFIS-5000 Display Operation (AFD-3010E) IFIS-5000 MDC Diagnostics (AFD-3010E) Integrated Flight Information System MDC DIAGNOSTICS (AFD-3010E) RATIONALE: The