BULLETIN 15 (Publication 35) Qualified Products List for Construction

form is available to download and fill-out. For manufactured products, an independent testing report is required to be submitted to show compliance with PennDOT's Pub 408 specifications. Independent test reports are required to be no older than five years at the time of application submission. You will not be able to sign and submit the application until all of the required attachments have been uploaded. The required documents are marked with an '*'. PennDOT limits individual attachments to 10 MB each. The manufacturing facility must be operational and able to produce the product submitted for evaluation. The Product Evaluation Application requires company information, product description and technical information, and Quality Control plan information. The Product Evaluation Application also requires specialized testing and certification for some manufacturers/companies, as summarized in the table below: The following entities are eligible to apply for Bulletin 15 approval: § Structural Steel Coatings § Geotextiles § ITS Devices § Pavement Markings § Pipe § Roadside Safety Hardware § Sign Sheeting § Sound Barriers § Traffic Signals § Work Zone Devices 3 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM During the product evaluation/approval process, index properties (including tolerances or ranges for these index properties) may be established for applicable products or product lines as a means to determine consistent compliance with the PennDOT specification requirements. The established index properties (and tolerances or ranges) will be considered inclusive of all associated sampling, material, and test method variability (i.e., ASTM/AASHTO precision estimates, manufacturing/product variability, shelf life effects, or any other deviations). When established, these index properties (and tolerances or ranges) are to be used by manufacturers in determining acceptable QC test results for these index properties. PennDOT will also use these established index properties (and tolerances or ranges) for future quality assurance verification or acceptance testing. Index properties (including tolerances or ranges) submitted by manufacturers are subject to review and acceptance by PennDOT LTS. Once the final index properties (and tolerances or ranges) have been established and approved by PennDOT, the manufacturer must adhere to producing consistent quality materials within these index property limits (tolerances or ranges). Proposed changes to the approved index properties may require the submission of a new Product Evaluation Application to PennDOT by the manufacturer. . 4 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Suppliers, distributors, or companies that outsource the manufacturing of their products, or private label products that are manufactured by other companies are typically not eligible to submit a Product Evaluation Application (for approval and listing in Bulletin 15) unless the outsourcing company performs all required quality control testing and verifications and assumes full responsibility for the performance of the product. Non-eligible companies may obtain products or material from any approved source listed in Bulletin 15, for resale to pre-qualified contractors. Eligible firms who need assistance completing the application may contact NPETS Support via phone at (717) 425-5816 or e-mail at RA-pdBOPDNPETS@pa.gov 5 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Bulletin 15 Levels of Certification Material provided by Producers listed in Bulletin 15 is approved for use only in its intended application(s). Producers will be assigned a Level of Certification, based on their ability to comply with the material specifications. Producers will initially be assigned a LEVEL 1 certification. Poor material performance or material quality issues may dictate a reevaluation of a producer’s certification level. The Levels of Certification are defined as follows: * Certain Bulletin materials require supplemental or alternate forms of certification, refer to the next section, Bulletin 15 Material Certification. Levels of Certification for Bulletin 15 Producers Producer Material Shipment Procedure Producer Additional Requirements Level 1 Standard Certification Ship on Certification with Form CS-4171* None Level 2 Standard Certification - Reduced Ship on Certification with Form CS-4171* See below Level 3 Lot Approval Certification Ship only after Material Lot Approval using Modified Certification, with Form CS-4171* See below Suspension or Removal In accordance with the State’s Contractor Responsibility Program:  Producer may be suspended or removed from Bulletin 15 for any of the reasons stated in the Bulletin 15 Preface, regardless of Producer certification level.  Failure of Producer to advance above Certification Level 3 will result in PennDOT’s initiating action for suspension or removal from Bulletin 15. 6 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM § LEVEL 1 (Standard Certification) - Initial Level of Certification typically issued to Bulletin 15 listed Producers. - Material is produced and tested in accordance with the Producer's approved QC Plan. - No known material performance or quality issues exist that warrant a reduced level of certification. - Material is shipped on certification using Form CS-4171. § LEVEL 2 (Standard Certification - Reduced) - Reduced Level of Certification issued to Bulletin 15 listed Producers who have exhibited minor/moderate material performance or quality issues. - Producer is required to work with PennDOT on submission of an improvement plan that may include, but is not limited to, any or all of the following items: a revised QC Plan, a failure analysis/action plan to assess why failures are occurring and how to prevent these failures from occurring in the future, correlation testing between in-house and independent lab testing to assist with validating results. - Material is produced and tested in accordance with the improvement plan approved by PennDOT. - Material is shipped on certification using Form CS-4171. § LEVEL 3 (Lot Approval Certification) - This Level of Certification is issued to Bulletin 15 listed Producers who have exhibited major material performance or quality issues. - Producer is required to work with PennDOT on an improvement plan as defined in Level 2. - Material cannot be shipped to projects using the standard CS-4171 certification process. - Producer must arrange for independent, in-plant acceptance testing (IPAT) that will be conducted side-by-side with "in-house" Producer testing at the designated frequencies in the revised QC plan. IPAT will be at the Producer's expense. PennDOT's Laboratory Testing Section (LTS) must approve the Producer's proposed IPAT provider, before it begins. - Any material lot to be used on a project must be tested and approved by the IPAT as meeting the required PennDOT specification prior to shipment to the project. - Each material lot meeting the specification may be shipped to a project using a modified certification process as follows: submit, to both the Project Representative and LTS, Form CS-4171 along with a signed letter from the IPAT (on their official letterhead) indicating that the material lot meets testing and specification requirements. - Correlate results from parallel "in-house" Producer testing and IPAT testing, and submit to the LTS on a monthly basis. 7 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Bulletin 15 Material Certification Form CS-4171 is completed by the manufacturer, fabricator, or producer (Producer) of Bulletin material provided to the project. The Producer maintains the original Form CS-4171 and provides a copy of Form CS-4171 with each direct shipment to the project. Producers must maintain all component certifications for purchased Bulletin materials, at their place of business for a period of not less than 3 years from the date of the last shipment to the project. Certification files must be available for inspection by the Department. When a Producer sells a Bulletin 15 material to a distributor/supplier (Shipper), the Producer provides a copy of Form CS-4171 with each delivery to the Shipper. When a Shipper provides Bulletin 15 material directly to the project, the Shipper completes and signs a new Form CS-4171 and provides a copy with each direct shipment to the project. The Shipper will maintain the copy of the Producer’s Form CS-4171 that they have received. Shippers must maintain a certification file for purchased Bulletin materials to provide an audit trail to the Producer. Certifications for purchased Bulletin materials must be maintained at their place of business for a period of not less than 3 years from the date of the last shipment to the project. Certification files must be available for inspection by the Department. The Contractor must ensure that Form CS-4171 is received for each project shipment of Bulletin material. The Contractor must submit to the Representative a properly completed and signed copy of Form CS-4171 for each project shipment. The Contractor should not incorporate any Bulletin material in the work until certification arrives on the project, unless otherwise approved by the Representative. Payment for material will be withheld until proper certification documentation is received. The Contractor must retain Form CS-4171 for a period of not less than 3 years from the date of the last project shipment and make files available for inspection and verification by the Department. § Epoxy coated or galvanized reinforcement steel requires the submission of supplemental certification Form CS-4171C (Epoxy Coating or Galvanizing Facility) and/or Form CS-4171F (Fabrication Facility). A completed CS-4171(DS), “Certificate of Compliance” with Digital Signature must be submitted electronically with each shipment of material to the project. Form CS-4171 must be properly signed by a legally responsible company official. For manufacturers supplying products directly to distributors, a hand-signed copy of CS-4171, can still be supplied. Certain Bulletin materials require the submission of supplemental CS-4171 certification in addition to Form CS-4171, to provide traceability of materials in multi-step manufacturing processes. § Certification of locally approved non-Bulletin materials requires submission of Form CS-4171LA(DS) § Structural steel, aluminum, or precast/prestressed concrete products, produced in a Bulletin 15 approved facility with an on-site state inspector or a state representative, must be stamped with an approved inspection stamp at the plant and certified with a Form CS-4171. Certain Bulletin materials require a form of certification other than the Form CS-4171, as identified in the particular material specification. § Section 701 and 702 materials require a properly completed vendor bill of lading. 8 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Contractors are responsible to the Department for the conformance to the specifications of all products and materials that the contractors select from Bulletin 15 and incorporate into the work on Department construction projects. Products may be monitored by the Department via inspection, sampling, and/or testing for quality assurance, verification, and acceptance purposes to ensure the quality of the material used is maintained. Product sample failures will be evaluated at PennDOT’s monthly Bulletin 15 failure committee meeting. Supplier test history will be reviewed to determine whether corrective action or root cause analysis by the supplier is warranted. If so, companies will be contacted individually with specifics regarding the requested information or other action(s) required. Failure to make corrections and consistently provide material meeting our specifications can and will result in reduction in certification level and may ultimately lead to Bulletin 15 removal. 9 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Plant Verification (PV) Samples Producers and manufacturers of bituminous materials, cement, glass beads, roadway paint, and structural steel paint are required to submit Plant Verification (PV) samples to the Department. Producers are advised to keep a sufficient quantity of material from each production lot or batch to serve as retain sample(s) to perform additional testing as requested or directed by the Department. In the event of a material PV Sample failure, the Department will require that the supplier’s retained sample be split and one split be re-tested by the supplier and the results forwarded to the Department for review and the other split be provided to the Department. The Department will in turn, perform re-testing on the provided retained sample and compare both sets of test results. Based on the material use and type of test failure, the Department will determine if the failure represented by the Department testing is significant enough to result in unacceptable performance, unanticipated maintenance or reduced service life, or other conditions which may warrant rejection and replacement. Significant material failures such as these may result in the Department notifying the supplier to take any or all of the following actions: 1. Identify and isolate the failed material to ensure that the failed material is not shipped to any PennDOT projects. 2. If the failed PV lot has already been shipped, immediately notify all brokers and distributers to whom the material was sent of the failure with instructions to recall the failed lot of material which was supplied to any PennDOT projects. 3. Supply PennDOT with a project list and the accompanying documentation (Form CS-4171 Certificate of Compliance or bill of lading) for any of the failed material that was delivered to PennDOT projects by the facility. 4. Submit an action plan to the Department within 30 days of notification to demonstrate how material and processes are to be controlled in the future to ensure material consistently meets PennDOT specification requirements. 10 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Bulletin 15 Removal Actions A manufacturer and/or product(s) may be removed from Bulletin 15 for any of the following reasons: § Any action or inaction that may affect the quality of the product, the integrity of the test results, or the implementation of the Quality Control plan. § Failure of the product to meet appropriate specifications. § Failure to submit or adhere to a Quality Control Plan. § Falsification of information provided on the Certificate of Compliance Form CS-4171, CS4171B, CS-4171C, CS-4171F or CS4171LA. § Failure to supply samples, test results, or other information requested by the Department. § Failure to notify the Bulletins Administrator at (717) 783-9673 within ten (10) days of any change in company contact information (name, address, or phone number) or change in product information (name, formula, quality control plan, or manufacturing process). § Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements or receiving stolen property. § Commission of fraud or a criminal offense or other improper conduct or knowledge or approval of, or acquiescence in these activities by an affiliate, officer, employee or other individual or entity associated with either obtaining, attempting to obtain or performing a public contract or subcontract. Acceptance of the benefits derived from the conduct shall be deemed evidence of knowledge, approval or acquiescence. § Violation of Federal or State antitrust statutes. § Violation of a State or Federal law regulating campaign contributions. § Violation of a State or Federal environmental law. § Violation of a State or Federal law regulating hours of labor, minimum wage standards or prevailing wage standards; discrimination in wages; or child labor violations. § Violation of the Workers’ Compensation Act (77 P. S. § § 1-2626). § Violation of a State or Federal law prohibiting discrimination in employment. § Suspension or debarment by the Commonwealth or an agency thereof or an agency of another state or by an agency or department of the Federal 11 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM government. § Three or more occurrences of being declared ineligible for a contract. § Unsatisfactory performance including failure to comply with the terms of a Commonwealth contract or subcontract including: § Willful failure to perform in accordance with the terms of one or more contracts, or a history of failure to perform, or of unsatisfactory performance of one or more contracts. § Failure to complete the work in the time frame specified in the contract. § Being declared in default on prior work or project. § Failure to submit documents, information or forms as required by contract. § Making false statements or failing to provide information or otherwise to cooperate with the contracting agency, the Office of State Inspector General or other Commonwealth authorities. § Discrimination in violation of laws or regulations in the conduct of business. § Providing false or misleading information to the Office of State Inspector General, Office of the Budget, the Department of the Auditor General, the Office of Attorney General, the Treasury Department, the Board of Claims, or other tribunal or court, the Department, or a representative of an agency as part of any investigation, audit, program review, certification, contract bids or proposals, applications or claims for payment. This information includes: § Financial statements. § Nondiscrimination forms. § Affidavits or statements of compliance with prevailing wage statutes. § Product descriptive literature and documents submitted in connection with claims for payment made or litigation against Commonwealth agencies. § Other acts or omissions indicating a lack of skill, ability, capacity, quality control, business integrity or business honesty. 12 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section Updates: How to Notify PennDOT of a Company or Product Name Change Product Name Change Notification For consideration by the Pennsylvania Department of Transportation, email the following information to RA-pdBulletin15@pa.gov ` 1. Manufacturer's Name ` 2. Bulletin 15 Supplier Code ` 3. Old Product Name ` 4. New Product Name ` 5. Effective Date ` 6. Statement certifying that it is the same product with the same formulation, performance, limitations, and is manufactured at the same facility. ` 7. A statement certifying that you are the authorized representative. ` 8. Please attach updated Product Data Sheets to the email message. ` 9. Include your name, email address, and phone number. `10. Include postal mailing addresses for both corporate and manufacturing facilities if different. Product Removal Notification 13 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section Updates: How to Notify PennDOT of a Company or Product Name Change Product Removal Notification To notify the Pennsylvania Department of Transportation that a product is no longer being manufactured, please email the following information to RA-pdBulletin15@pa.gov ` 1. Manufacturer's Name ` 2. Product Name ` 3. Bulletin 15 Supplier Code ` 4. Effective Date ` 5. Is the product sold to distributors and is there a remaining supply? ` 6. A statement certifying that you are an authorized representative of the product. ` 7. Include your name, email address, and phone number. Company Name Change Notification For consideration by the Pennsylvania Department of Transportation, email the following information to RA-pdBulletin15@pa.gov ` 1. Company Name to Be Updated ` 2. New Company Name ` 3. Bulletin 15 Supplier Code(s) ` 4. Effective Date ` 5. Statement certifying that the products are materially the same, with the same formula, performance, limitations, and manufactured at the same physical location. ` 6. Statement that key personnel have been retained under the new company name. ` 7. Include your printed name, date, signature, email address, phone number, mailing addresses for both corporate office and manufacturing facility if separate locations. 14 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 106.02: Project-Specific Locally Approved Materials 106.02 Project-Specific Locally Approved Materials In accordance with Publication 408, Section 106.02 (a) 2.c, the following Pub 408 Sections contain construction materials that are defined as Project-Specific, Locally Approved Materials. PennDOT does not require manufacturers of Project-Specific, Locally Approved Materials to submit a Product Evaluation Application (CS-4170) for approval and listing of their material(s) in Bulletin 15. Project-Specific, Locally Approved Materials are not listed in Bulletin 15. Contractors proposing to use materials that meet the specification requirements must list them on Form CS-200 (Source of Supply-Materials) and submit them for local approval by the Representative (i.e. at the District or project level). Refer to the corresponding Pub 408 Sections for specification and documentation requirements. * Section 420.2(d): Asphalt Edge Restraints * Section 659.2(c): Aggregate Surface Topping for HFST * Section 802: Topsoil Furnished and Placed * Section 806.2(a, b): Temporary & Permanent Rolled Erosion Control Products (RECPs) * Section 860.2(a): Inlet Filter Bag * Section 867: Compost Filter Sock * Section 868: Compost Blanket and Compost Filter Berm 15 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 212: Geotextiles 212.5 Geosynthetic Clay Liners Last Revised: 9/30/2025 For projects let on or after October 24, 2025 Standard Special Provision c02230 ITEM 9212-0101 Geosynthetic Clay Liner Product Name Ref. No. AGRU America, Inc., 500 Garrison Road, Georgetown, SC 29440 https://agruamerica.com/ AGRUA 15 Geosynthetic Clay Liner (GCL) GeoClay WN36-7-03S 2025-049Q 16 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 218: Foamed Glass Aggregate 218.2(a) Foamed Glass Aggregate Last Revised: 3/29/2024 Requirements: Foam Glass Aggregate Specification Product Name Ref. No. Aero Aggregates LLC, 1500 Chester Pike, Eddystone, PA 19022 https://aeroaggregates.com/ AERO1 15 Foamed Glass Aggregate (FGA) AeroAggregates FG-G15 2017-048 TDS: AeroAggregates FG-G15 Technical Data Sheet 17 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 219: Geofoam Lightweight Fill 219.2(a) Expanded Polystyrene (EPS) Geofoam Blocks Last Revised: 11/7/2024 Product Name Ref. No. Poly Molding LLC, 96 Fourth Avenue, Haskell, NJ 07420 https://www.polymoldingllc.com/ POLMD 15 EPS Geofoam Block - Type 1 (EPS22) EPS 22 2015-155Q EPS Geofoam Block - Type 2 (EPS39) EPS 39 2015-155Q 18 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 220: Flowable Backfill 220.2(i) Air Entraining Admixtures Last Revised: 8/4/2022 Product Name Ref. No. Recommeded Dosage NTPEP Test Number Forta Concrete Fiber, 100 Forta Drive, Grove City, PA 16127 https://forta-ferro.com/products/goldenair-liquid-foaming-agent/ CELLC 15 Plant 5902 McIntyre Street Golden, CO 80403 Air Entraining Admixture For Flowable Fill [AEA] Forta GoldenAir 2002-139Q Chryso Inc., 100 Research Drive, Wilmington, MA 01887 https://www.chrysoinc.com/ CHRYS215 Plant 2133 85th Street North Bergen, NJ 07047 Formerly: GCP Applied Technologies Inc. (GRAC2 15) Air Entraining Admixture For Flowable Fill [AEA] Darafill 1997-148 Euclid Chemical Company, 19215 Redwood Road, Cleveland, OH 44110-2799 http://www.euclidchemical.com/ EUCLD 15 Air Entraining Admixture For Flowable Fill [AEA] Eucon Easy Fill 2015-056Q Fritz-Pak Corporation, 4821 Eastover Circle, Mesquite, TX 75149 http://www.fritzpak.com/ FRITZ 15 Air Entraining Admixture For Flowable Fill [AEA] Sika Lightcrete Powder 2013-205Q Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-us MBS-0 15 Facility 23700 Chagrin Blvd. Cleveland, OH 44122 Air Entraining Admixture For Flowable Fill [AEA] MasterCell 25 (Rheocell/Rheofill) 1999-132Q As required by testing CADD-2015-01-120 Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-us MBS-5 15 Plant 7100 Wright Rd. Houston, TX 77041 Air Entraining Admixture For Flowable Fill [AEA] MasterCell 30 (Rheocell 30) 2006-024Q As required by testing 19 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 12/30/2025 For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement. For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g) Product Ref. No. Name NTPEP Test Number 3S Chemicals, LLC, 1379 Shoemaker St, Nanty-Glo, PA 15943 https://3schemicalsllc.com/ 3SC-1 15 Chemical Additive with Anti-Strip Additives OMEGA BOND 2025-210Q Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (12/28/2025 to 12/28/2027). Contact PennDOT’s Laboratory Testing Section at (717) 346-1548 before using on a project. Notification shall include the following information: ECMS Project No., ECMS Construction Item Number, State Route, Beginning Location (Segment/Offset), End Location (Segment/Offset), JMF Year & Number, and JMF Supplier Code. Chemical Additive with Anti-Strip Additives ULTRA BOND 2025-046Q Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (6/12/2025 to 6/12/2027). Contact PennDOT’s Laboratory Testing Section at (717) 346-1548 before using on a project. Notification shall include the following information: ECMS Project No., ECMS Construction Item Number, State Route, Beginning Location (Segment/Offset), End Location (Segment/Offset), JMF Year & Number, and JMF Supplier Code. Astec Industries, Inc., P.O. Box 72787, Chattanooga, TN 37407 http://www.astecindustries.com/ ASTIN 15 Mechanical Foaming Equipment/Process Astec Warm Mix System / Double Barrel Green / GreenPac System ----- CECA, Subsidiary of Arkema, 89 Boulevard National, La Garenne-Colombes, France 92257 https://specialtysurfactants.arkema.com/en/products/product/f/205/p/cecabase-rt-945/ CECA 15 Chemical Additive Cecabase RT 945 2011-153 Cargill Industrial Specialties, 12201 South Torrence Avenue, Chicago, IL 60617 http://www.cargill.com/bioindustrial CIS01 15 Chemical Additive with Anti-Strip Additives Anova 1501 2018-014Q WMA-2022-02-004 Eastern Industries, Inc., 4401 Camp Meeting Rd., Ste 200, Center Valley, PA 18034 https://www.nesl.com/ EASIN 15 Mechanical Foaming Equipment/Process SMART-FOAM System 2011-207Q 20 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 12/30/2025 For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement. For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g) Product Ref. No. Name NTPEP Test Number Gencor Industries, Inc., 5201 N. Orange Blossom Trail, Orlando, FL 32810 http://www.gencor.com/ GENID 15 Mechanical Foaming Equipment/Process Green Machine UltraFoam GX2 Process ----- Maxam Equipment, Inc., 1575 Universal Ave., Kansas City, MO 64120 http://maxamequipment.com/Products.htm MAXEQ 15 Mechanical Foaming Equipment/Process AQUABlack Solutions WMA System ----- McConnaughay Technologies, Suit-Kote Corporation, 1911 Lorings Crossing, Cortland, NY 13045 https://www.suit-kote.com/low-emission-asphalt-lea/ MCCTE 15 Foaming Additive/Process Low Emission Asphalt (LEA) ----- 21 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 12/30/2025 For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement. For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g) Product Ref. No. Name NTPEP Test Number Ingevity, 5255 Virginia Avenue, North Charleston, SC 29406-3615 http://www.ingevity.com MEAWE 15 Chemical Additive Evotherm DAT ----- Chemical Additive with Anti-Strip Additives Evotherm J1 2017-059Q WMA-2021-02-001 Chemical Additive with Anti-Strip Additives Evotherm J88 2023-062Q Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for an additional year from 10/15/2025 to 10/15/2026). Chemical Additive with Anti-Strip Additives Evotherm M1 ----- WMA-2023--02-003 Chemical Additive with Anti-Strip Additives Evotherm M1-A 2024-101Q Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (6/28/2024 to 6/2/2026). Chemical Additive with Anti-Strip Additives Evotherm M18 2018-035Q WMA-2023-02-003 Chemical Additive with Anti-Strip Additives Evotherm M80 2023-029Q WMA-2023-02-003 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for another year from 10/15/2025 to 10/15/2026. Chemical Additive with Anti-Strip Additives Evotherm P25 2017-061Q WMA-2019-01-007 Chemical Additive with Anti-Strip Additives Evotherm S30 2023-218Q WMA-2023-02-004 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (2/1/2024 to 2/1/2026). Chemical Additive with Anti-Strip Additives Evotherm U3 2017-060Q Meeker Equipment, 4381 Front Mountain Road, Belleville, PA 17004 https://www.meekerequipment.com/productDetails-11 MEEEQ 15 Mechanical Foaming Equipment/Process Warm Mix System ----- Nouryon Chemicals LLC, 100 Matsonford Road, Building 5, Suite 550, Radnor, PA 19087 https://www.nouryon.com/markets/asphalt/ NOUR1 15 Plant 8005 N Tabler Road Morris, IL 60450 Formerly AkzoNobel Surface Chemistry, LLC (AKZO1 15) Chemical Additive with Anti-Strip Additives Rediset LQ-1102C 2017-072Q WMA-2016-01-003 22 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 12/30/2025 For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement. For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g) Product Ref. No. Name NTPEP Test Number PQ Corporation, Linden Wood Corporate Center, 300 Lindenwood Drive, Malvern, PA 19355-1740 http://pqcorp.com/ PQCOR 15 Foaming Additive/Process Advera WMA ----- Reliable Asphalt Products, Inc., 521 Old Seven Mile Pike, Shelbyville, KY 40065 http://www.reliableasphalt.com/ RAP-1 15 Mechanical Foaming Equipment/Process Reliable Asphalt Warm Mix System 2018-198Q Arkema-Road Science, 6502 South Yale Avenue, Tulsa, OK 74136 https://specialtysurfactants.arkema.com/en/ ROAD1 15 Facility Vanceboro, NC Formerly Road Science, Division of ArrMaz Chemical Additive with Anti-Strip Additives WarmGrip ULTRA 1 (AD-here ULTRA 1) 2017-134Q WMA-2020-01-001 Chemical Additive with Anti-Strip Additives WarmGrip ULTRA 2C (AD-here ULTRA 2C) 2017-133Q WMA-2022-01-002 Sasol Chemicals America, 102 Cutting Blvd., Richmond, CA 94804 https://www.sasobit.com/en/ SASW- 15 Organic Additive Sasobit ----- Sonneborn, LCC, 600 Parsippany Road, Suite 100, Parsippany, NJ 70540 https://www.sonneborn.com/en-us/ SONNE 15 Plant Sonneborn Specialty Products 100 Sonneborn Lane Petrolia, PA 16050 Organic Additive SonneWarmix RT 2016-015 WMA-2024-01-007 Organic Additive with Anti-Strip Additives Sonnegreen AS 2016-005Q Organic Additive with Anti-Strip Additives Sonnegreen AS IV 2017-164 Stansteel, 12711 Townepark Way, Louisville, KY 40243 https://stansteel.com/accu-shear/ STAAS 15 Mechanical Foaming Equipment/Process Accu-Sheer Warm Mix Asphalt System ----- 23 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 12/30/2025 For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement. For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g) Product Ref. No. Name NTPEP Test Number Tri-State Sand, LLC, 3408 Stoneridge Drive, Johnson City, TN 37604 https://www.tristatesand.com/ TSS-1 15 Plant Jonesboro, GA Chemical Additive with Anti-Strip Additives LAS 100 WMA 2024-257Q WMA-2021-01-004 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (6/12/2025 to 6/12/2027). Contact PennDOT’s Laboratory Testing Section at (717) 346-1548 before using on a project. Notification shall include the following information: ECMS Project No., ECMS Construction Item Number, State Route, Beginning Location (Segment/Offset), End Location (Segment/Offset), JMF Year & Number, and JMF Supplier Code. Zydex Industries, Zydex House, 61 Gotri-Sevasi Road, Sevasi, Vadodara, India 391101 https://zydexgroup.com/bitumen-additive/ ZYDEXA15 Facility 106 Kitty Hawk Dr. Morrisville, NC 27560 Chemical Additive with Anti-Strip Additives ZycoTherm-SP 2018-073Q WMA-2021-02-002 Chemical Additive with Anti-Strip Additives ZycoTherm-SP2 2022-267Q WMA-2022-02-001 413.2(k) Aramid Fibers Last Revised: 7/28/2022 The use of this product will be in accordance with Standard Special Provision cc00057 ITEM 9000 - _ _ _ _ - Fiber Modified _ _ _ _ Course, PG _ _-_ _, _ _ _ _ Million ESALS Standard Special Provision c00075 Fiber Modified For contracts bid prior to April 10, 2020, this Section was formerly 409.2(g) per SSP #I-c00045 ITEM 9000 - HMA FIBER MODIFIED COURSE Product Name Ref. No. Forta Corporation, 100 Forta Drive, Grove City, PA 16127 https://fortacorp.com/ FORTA 15 Aramid Fiber Blend FORTA-FI 2016-071Q Aramid Fiber Blend FORTA-FI for HMA 2011-021A 24 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 413: Superpave Mixture Design 413.2(k) Aramid Fibers Last Revised: 7/28/2022 The use of this product will be in accordance with Standard Special Provision cc00057 ITEM 9000 - _ _ _ _ - Fiber Modified _ _ _ _ Course, PG _ _-_ _, _ _ _ _ Million ESALS Standard Special Provision c00075 Fiber Modified For contracts bid prior to April 10, 2020, this Section was formerly 409.2(g) per SSP #I-c00045 ITEM 9000 - HMA FIBER MODIFIED COURSE Product Name Ref. No. Surface Tech LLC, 111 SW 5th Ave., Suite 1940, Portland, OR 97204 http://www.surface-tech.com/ SURF1 15 Plant Shelton, CT Aramid Fiber Blend ACE Fiber 2016-175Q Contact PennDOT’s New Products & Innovations Section at (717) 787-3137 before using on a project. Notification shall include the following information: ECMS Project No., State Route, County, and Bulletin 41 Producer. 25 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 419: Stone Matrix Asphalt Mixture 419.2(d)2 Cellulose Fiber Stabilizer Any brand of cellulose fiber that prevents mixture draindown may be used in SMA mixes. 419.2(d)5 Crumb Rubber Stabilizer Last Revised: 7/6/2015 Product Name Ref. No. Liberty Tire Recycling, LLC, 490 Ohio Street, Lockport, NY 14094 http://libertytire.com/Home.aspx LIB-1 15 Crumb Rubber (CR) TR 20 Minus 2013-099Q Crumb Rubber (CR) WTG 20 2013-098Q Liberty Tire Recycling, LLC, 100 Talbot Avenue, Braddock, PA 15104 http://libertytire.com/Home.aspx LIB-2 15 Crumb Rubber (CR) 20 WMA 2013-097Q Mahantango Enterprises, Inc., 2100 Old Trail Road, Liverpool, PA 17045 http://www.mahantango.com/ MAHAN 15 Crumb Rubber (CR) MAH-1A 1994-031 Edge Rubber, 811 Progress Road, Chambersburg, PA 17201 http://www.edgerubber.com NRIND 15 Plant 811 Progress Road Chambersburg, PA 17201 Formerly NRI Industries Crumb Rubber (CR) ----- Sparton Enterprises, Inc., 861 Norton Avenue, Barberton, OH 44203 https://www.spartonenterprises.com/ SPART 15 Crumb Rubber (CR) 58702 Ground Rubber 1991-072 26 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 420: Pervious Asphalt Pavement System 420.2(d) Asphalt Edge Restraints Project-Specific, Locally Approved Material. In accordance with Publication 408, Section 106.02(a)2.c, a material specified for use in this Section is defined as a Project-Specific, Locally Approved Material. PennDOT does not require manufacturers of Project-Specific, Locally Approved Materials to submit a Product Evaluation Application for approval and listing of their material(s) in Bulletin 15. Project-Specific, Locally Approved Materials are not listed in Bulletin 15. Contractors proposing to use materials that meet the specification requirements must list them on Form CS-200 (Source of Supply-Materials) and submit them for local approval by the Representative (i.e. at the District or project level). Refer to Publication 408, Section 420.2(d) for specification requirements. Submit for local approval by the Representative all required information for the material, as indicated in the specification. Also refer to the Project Specific, Locally Approved Materials section (Section 106) of Bulletin 15 for a complete listing of Publication 408 Sections that fall within this category. 27 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 466: Asphalt Paving Fabric 466.2(a) Geotextile Paving Fabric Last Revised: 1/20/2026 Paving Fabrics (AASHTO M 288) are saturated during installation with asphalt cement for use between pavement layers. Paving fabrics and grids act as a stress relieving membrane within the pavement structure and are intended for full width applications. For placing Heavy Duty Membranes over transverse and longitudinal joints and random cracks in existing concrete pavements, see Section 467. Product Ref. No. Name NTPEP Test Number Saint-Gobain ADFORS, 140 John James Audubon Pkwy, Suite 102, Amherst, NY 14228 https://www.adfors.com/road-reinforcement/glasgridr ADFORS15 Plant 14770 East Avenue Albion, NY 14411 Fiberglass Reinforced Paving Grid GlasGrid 8511 Asphalt Reinforcement System 2014-122 Conditionally approved per manufacturer's specifications: GlasGrid 8511 Manufacturer's Specifications Carthage Mills, 4243 Hunt Road, Cincinnati, OH 45242 https://carthagemills.com/ CART1 15 Plant Athens, GA Geotextile Paving Fabric, Type II FX-42A/O (GC140) 2022-017PL GTX-2021-01-252 This approval is only for FX-42A/O manufactured in the United States. Carthage Mills, 4243 Hunt Road, Cincinnati, OH 45242 https://carthagemills.com/ CART2 15 Plant Hazlehurst, GA, Ringgold, GA Geotextile Paving Fabric, Type II FX-42A/O (PETROMAT Plus-White 4598W) 2022-065Q GTX-2021-01-252 Carthage Mills, 4243 Hunt Road, Cincinnati, OH 45242 https://carthagemills.com/ CART3 15 Plant Pendergrass, GA/Athens, GA Geotextile Paving Fabric, Type II FX-42A/O (Mirafi MPV500) 2022-018PL GTX-2021-01-252 SOLMAX, 428 Rollins Industrial Blvd., Ringgold, GA 30736 https://www.solmax.com/us/en PROP2 15 Formerly Propex Operating Company Geotextile Paving Fabric, Type II Petromat 4597 2011-181Q GTX-2019-01-085 Geotextile Paving Fabric, Type II Petromat 4598 2020-065Q GTX-2019-01-086 Geotextile Paving Fabric, Type II Petromat Enviro 2020-230Q GTX-2021-01-060 Geotextile Paving Fabric, Type II Petromat Plus-White 4598W 2020-066Q 28 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 466: Asphalt Paving Fabric 466.2(a) Geotextile Paving Fabric Last Revised: 1/20/2026 Paving Fabrics (AASHTO M 288) are saturated during installation with asphalt cement for use between pavement layers. Paving fabrics and grids act as a stress relieving membrane within the pavement structure and are intended for full width applications. For placing Heavy Duty Membranes over transverse and longitudinal joints and random cracks in existing concrete pavements, see Section 467. Product Ref. No. Name NTPEP Test Number SKAPS Industries Nonwoven Division, USA - Headquarter, 335 Athena Drive, Athens, GA 30601 http://www.skaps.com/ SKA-2 15 Plant 335 Athena Drive Athens, GA 30601 Geotextile Paving Fabric, Type II GC140 2021-070Q GTX-2021-01-030 SOLMAX, 365 South Holland Drive, Pendergrass, GA 30567 https://www.solmax.com/en/ams/products/mirafi TCGEO 15 Plant Pendergrass, GA & Cornelia, GA Formerly TenCate Geosynthetics Fiberglass Reinforced Paving Grid Mirafi PGM-G4 2015-133 Conditionally approved per manufacturer's specifications: TenCate Mirafi PGM-G4 Manufacturer's Specifications Geotextile Paving Fabric, Type II Mirafi MPV500 2021-069Q GTX-2021-01-181 Geotextile Paving Fabric, Type II Petromat MPV600 (Mirafi MPV600) 2012-183 GTX-2019-01-102 (Pendergrass, GA) 29 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 467: Heavy Duty Membranes 467.2(a) Heavy Duty Membranes Last Revised: 3/2/2026 Heavy Duty Membranes are placed over transverse and longitudinal joints and random cracks in existing concrete pavements before placing the pavement overlay. Heavy Duty Membranes are not intended for full width applications and are not evaluated against AASHTO M 288 paving fabric requirements. For AASHTO M 288 paving fabrics, see Section 466.2(a) Geotextile Paving Fabric. Heavy Duty Membranes listed in Section 467.2(a) are conditionally approved per the manufacturer's specifications. It is the responsibility of the District to verify whether a conditionally approved product meets the project requirements on a case-by-case basis. Product Ref. No. Name Membrane Width Letter Date Crafco, Inc., 6165 W. Detroit Street, Chandler, AZ 85226 http://www.crafco.com/ CRAF0 15 Plant 121 Industrial Park Road Halls, TN 38040 Heavy Duty Membrane Alternate GeoTac 2000-139Q 12", 18", 24", 36", and 48" 7/5/2000 As of 6/3/2022, this product is no longer being manufactured. Conditionally approved per manufacturer's specifications. See Section 680.2(b) Adhesive-backed Preformed Membrane Sheet for primary use on non-bridge decks and bridge decks. PDS - Crafco GeoTac Product Data Sheet Polyguard Products, Inc., PO Box 755, Ennis, TX 75120-0755 http://www.polyguardproducts.com/ POLYG 15 Heavy Duty Membrane Alternate Polyguard NW 75 Membrane 2022-057Q Standard 12", 24", and 48"; Custom 18" and 36" Conditionally approved to manufacturer's specifications. PDS - Polyguard NW-75 Product Data Sheet SOLMAX, 4019 Industrial Drive, Chattanooga, TN 37416 https://www.solmax.com/en/ams PROP1 15 Formerly Propex Operating Company Heavy Duty Membrane Alternate PETROMAT Petrotac 4591 1980-099 12", 18", 24", and 36" 9/15/1986 Conditionally approved to manufacturer's specifications. See Section 680.2(b) Adhesive-backed Preformed Membrane Sheet for primary use on non-bridge decks and bridge decks. PDS - PETROMAT Petrotac Technical Data Sheet 30 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 470: Asphalt Seal Coat 470.2 Asphalt Seal Coat Last Revised: 7/6/2017 Refer to Bulletin 15, Section 702 for sources of asphalt material specified in Publication 408, Section 470.2(a). Refer to Bulletin 14 for sources of coarse aggregate specified in Publication 408, Section 470.2(b). Product Ref. No. Name Reference Letter All States Construction, LLC, 325 Amherst Road, P.O. Box 91, Sunderland, MA 01375 http://www.asmg.com TRI-3 15 Facility 901 River Road Deerfield, MA 01342 Formerly All States Asphalt, LLC CRMB for Rubberized Asphalt Seal Coat (RASC) ----- 2/12/2010 Conditional approval per: Rubberized Asphalt Seal Coat, SRL-H Conditional Specification 31 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 472: Asphalt Fog Seal for Asphalt Seal Coats 472.2(a) Emulsified Asphalt Material Last Revised: 5/2/2025 This section only includes the approvals for Proprietary Fog Seal Materials. The approved manufacturers of CSS-1h, SS-1h, SS-1hP, CSS-1hP, NTT, and CNTT emulsified asphalts are listed in Section 702c. Product Name Ref. No. Asphalt Systems, Inc., 2775 West 1500 South, Salt Lake City, UT 84104 https://asphaltsystemsinc.com/ ASI-1 15 Plant K-Tech Specialty Coatings 111 West Garfield Ashley, IN 46705 Proprietary Fog Seal Materials GSB-88 Emulsified Sealer/Binder 2013-073Q Conditionally Approved per the following criteria: 1. The product must be applied at a temperature between 70 F and 150 F. 2. All dilution must be done by the emulsified asphalt supplier at the emulsified asphalt supplier plant location. If dilution is allowed according to manufacturer's recommendations, do not exceed dilution of less than 38% asphalt residue. 3. Dilution of the asphalt emulsion in the field is not allowed. Russell Standard Corporation, 118 Siloam Road, Chambersburg, PA 17201 http://www.russellstandard.com/ RUSS3 15 Proprietary Fast Break Fog Seal Materials Grip Tight 2019-195Q Conditionally approved according to manufacturer's recommendations. Application Temperatures according to manufacturer's recommendations. If dilution is allowed according to manufacturer’s recommendations, do not exceed dilution of less than 38% asphalt residue. Dilution of asphalt emulsion in the field is not allowed. 32 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 501: Reinforced or Plain Cement Concrete Pavements 501.2(p) Anchor Material Last Revised: 3/2/2026 See Standard Drawing RC-26M (Publication 72M) Note: Adhesive anchors are not to be used for permanent installations which have the anchor in tension due to external loading regardless of whether the anchor is in a horizontal or vertical position. External loading can be from moment, moment and shear or direct tension to cause tension in the anchor. Tension due to a torqued bolt is not an external load. For Pub 408, 2016 Change No. 7 and earlier (Oct. 4, 2019), anchor material had been listed in Section 516.2(k). Anchor material was moved to Section 501.2(p) in Pub 408, 2020 Initial Edition (April 10, 2020). Product Name Ref. No. Meridian Adhesives Group, Infrastructure Division, 800 College Avenue, Dalton, GA 30720-1301 https://meridianadhesives.com/adhesives-technology/ ADHTC 15 Facility Adhesives Technology Corp. 450 East Copans Road Pompano Beach, FL 33064 Dowel Bar Adhesive ULTRABOND 1300 Doweling Epoxy 1992-013B Dowel Bar Adhesive ULTRABOND ASF-1000 Acrylic Doweling Adhesive 2016-242Q Dowel Bar Adhesive ULTRABOND ASF-2000 Doweling Adhesive 2023-115Q Dowel Bar Adhesive ULTRABOND HS-1CC Anchoring & Doweling Epoxy 2018-040Q Dowel Bar Adhesive ULTRABOND HS-200 Anchoring Epoxy 2002-048Q FasTrac Construction Products, 1150 SE Hamblen Road, Lee's Summit, MO 64063 https://www.fastracproducts.com/ CCMAT 15 Facility 101 East Walnut Street Archie, MO 64725 Dowel Bar Adhesive FasTrac CE308 Standard Set Anchoring Gel 2017-236Q Dayton Superior Corporation, 1125 Byers Road, Miamisburg, OH 45342-5765 http://www.daytonsuperior.com/ DAYT0 15 Dowel Bar Adhesive ProAnchor Elite Epoxy Gel Anchor 2023-088Q DEWALT, 701 East Joppa Road, Towson, MD 21286 https://anchors.dewalt.com/anchors/ DEWA2 15 Dowel Bar Adhesive Pure220+ 2025-050Q 33 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 501: Reinforced or Plain Cement Concrete Pavements 501.2(p) Anchor Material Last Revised: 3/2/2026 See Standard Drawing RC-26M (Publication 72M) Note: Adhesive anchors are not to be used for permanent installations which have the anchor in tension due to external loading regardless of whether the anchor is in a horizontal or vertical position. External loading can be from moment, moment and shear or direct tension to cause tension in the anchor. Tension due to a torqued bolt is not an external load. For Pub 408, 2016 Change No. 7 and earlier (Oct. 4, 2019), anchor material had been listed in Section 516.2(k). Anchor material was moved to Section 501.2(p) in Pub 408, 2020 Initial Edition (April 10, 2020). Product Name Ref. No. Euclid Chemical Company, 19215 Redwood Road, Cleveland, OH 44110-2799 http://www.euclidchemical.com/ EUCLD 15 Dowel Bar Adhesive Dural 452 Gel (Epoxy Adhesive) 2003-098Q Dowel Bar Adhesive Dural Fast Set Gel (Epoxy Adhesive) 1999-184Q Hilti, Inc., 5400 South 122nd East Ave., P.O. Box 21148, Tulsa, OK 74121 https://www.hilti.com/ HILT- 15 Dowel Bar Adhesive HIT-RE 500 V3 Epoxy Adhesive Anchoring System 2001-100Q ICC-ES Evaluation Report: ICC-ES Evaluation Report: ESR-3814 (Subject to renewal 1/2027) Dowel Bar Adhesive HVU2 Adhesive Capsule 2000-123Q ICC-ES Evaluation Report: ESR-4372 ITW Commercial Construction North America, 155 Harlem Avenue, Glenview, IL 60025 https://www.itwccna.com/ ITW-R 15 Dowel Bar Adhesive Red Head C6+ High Strength Adhesive 2017-289Q ICC-ES Evaluation Report: ESR-4046 Kaufman Products, Inc., 3811 Curtis Ave., Baltimore, MD 21226-1131 http://www.kaufmanproducts.net/ KAUFM 15 Dowel Bar Adhesive SurePoxy 116 Epoxy Dowel Bar Adhesive 1992-169 Dowel Bar Adhesive SurePoxy 117 Epoxy Dowel Bar Adhesive 1990-371 W. R. Meadows, Inc., 300 Industrial Drive, P.O. Box 338, Hampshire, IL 60140-0338 http://www.wrmeadows.com/ MEDW0 15 Plant Hampshire, IL Dowel Bar Adhesive Rezi-Weld Gel Paste (Construction Epoxy) 1993-280Q 34 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 501: Reinforced or Plain Cement Concrete Pavements 501.2(p) Anchor Material Last Revised: 3/2/2026 See Standard Drawing RC-26M (Publication 72M) Note: Adhesive anchors are not to be used for permanent installations which have the anchor in tension due to external loading regardless of whether the anchor is in a horizontal or vertical position. External loading can be from moment, moment and shear or direct tension to cause tension in the anchor. Tension due to a torqued bolt is not an external load. For Pub 408, 2016 Change No. 7 and earlier (Oct. 4, 2019), anchor material had been listed in Section 516.2(k). Anchor material was moved to Section 501.2(p) in Pub 408, 2020 Initial Edition (April 10, 2020). Product Name Ref. No. MKT Fastening, LLC, 1 Gunnebo Drive, Lonoke, AR 72086 https://mktfasteningusa.com/ MKTFS 15 Dowel Bar Adhesive Liquid Roc 300 Polyester Twin Tube 1994-199 Sika Corporation, 201 Polito Avenue, Lyndhurst, NJ 07071 https://usa.sika.com/ SIKA1 15 Plant 1682 Marion Williamsport Road E Marion, OH 43302 Dowel Bar Adhesive Sikadur Injection Gel (Epoxy Paste Adhesive) 1989-236 Simpson Strong-Tie, Inc., 136 Official Road, Addison, IL 60101 http://www.strongtie.com/ SIMST 15 Dowel Bar Adhesive AT-XP High-Strength Acrylic Adhesive 1999-223Q The AT-XP model was discontinued in 2024. Any remaining supply of the AT-XP adhesive can continue to be used on PennDOT projects as long as within the product's shelf life. Dayton Superior Corporation - UNITEX, 3101 Gardner Ave., Kansas City, MO 64120 http://www.daytonsuperior.com/brands/chemicals/unitex UNITX 15 Dowel Bar Adhesive Pro-Poxy 300 Fast (Epoxy Anchoring Gel) 1996-004 Dowel Bar Adhesive Pro-Poxy 400 (Acrylic Anchoring Gel) 2001-228Q 501.2(r) Preformed Cellular Polystyrene (ASTM C578) See Section 516.2(m) for listing of approved preformed cellular polystyrene products per ASTM C578. 501.2(s) Fiberglass Dowel Sleeve Last Revised: 2/28/2023 Product Name Ref. No. 35 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 501: Reinforced or Plain Cement Concrete Pavements 501.2(s) Fiberglass Dowel Sleeve Last Revised: 2/28/2023 Product Name Ref. No. Bedford Reinforced Plastics, 264 Reynoldsdale Road, Bedford, PA 15522 http://bedfordreinforced.com/ BEDRP 15 Dowel Bar Sleeve, Reinforced Plastic 1997-151 Creative Pultrusions, Creative Composites Group, 214 Industrial Lane, P.O. Box 6, Alum Bank, PA 15521-0006 https://www.creativecompositesgroup.com/about/creative-pultrusions CPULT 15 Dowel Bar Sleeve, Reinforced Plastic Pultex 1500 (Fiberglass reinforced, Isophalic Polyester) 1992-199 Structural Fiberglass, Inc., 4766 Business Route 220 North, PO Box 615-T, Bedford, PA 15522 http://www.structuralfiberglass.com/ STRFG 15 Dowel Bar Sleeve, Reinforced Plastic 1997-150 36 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 503: Protective Coating for Cement Concrete Pavement 503.2(a) Penetrating Sealer for Concrete Pavement Last Revised: 4/11/2025 Effective for contracts let on or after April 1, 2022 (Pub 408/2020 Change No. 4 and later). Product Name Ref. No. Euclid Chemical Company, 19215 Redwood Road, Cleveland, OH 44110-2799 http://www.euclidchemical.com/ EUCLD 15 Penetrating Sealer (Concrete Pavement), Water-based Siloxane/Silane Baracade WB 244 1999-185Q Sika Corporation, 889 Valley Park Drive, Shakopee, MN 55379 https://usa.sika.com/en/ MBS-4 15 Plant 6450 Bristol Pike Levittown, PA 19057 Formerly Master Builders Solutions Penetrating Sealer (Concrete Pavement), Oregano-Silicon in Water Sikagard-400 Enviroseal (Formerly MasterProtect H 400) 1987-129Q Sika Corporation, Construction Systems, 889 Valley Park Drive, Shakopee, MN 55379 https://usa.sika.com/en/ MBS10 15 Plant 23930 Concord Avenue Mattawan, MI 49071 Formerly Master Builders Solutions US LLC Penetrating Sealer (Concrete Pavement), Oregano-Silicon in Water Sikagard H 1000 (formerly MasterProtect H 1000) 2011-227Q 37 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 516: Concrete Pavement Patching 516.2 Concrete Pavement Patching Last Revised: 9/27/2017 Refer to Publication 408, Section 516.2 for the various materials comprising concrete pavement patching. The product listing below is conditionally approved as an alternate system to Concrete Pavement Patching as specified in Publication 408, Section 516.2. Product Name Ref. No. Fort Miller Company, Inc., P.O. Box 98, Schuylerville, NY 12871-0098 http://www.fortmiller.com/ FTML1 15 Precast Concrete Pavement Slab Super-Slab Precast Concrete Pavement System (PCPS) 2009-124 Full Depth Concrete Pavement Repair, Precast: Item 9516-2034 - 10" Depth and Item 9516-3036 - 12" Depth Conditionally approved as an alternate Type A patch per Fort Miller Company's specifications. Fort Miller Company is a licensor, fabricator, and trademark owner of Super-Slab. Northeast Precast, 4081 S Lincoln Avenue, Vineland, NJ 08361 http://www.northeastprecast.com/ NORPR 15 Precast Concrete Pavement Slab Super-Slab Precast Concrete Pavement Panel Fabricator 2017-221 Full Depth Concrete Pavement Repair, Precast: Item 9000-0516 - 13" Depth Conditionally approved as an alternate Type A patch per the Super-Slab licensor's (Fort Miller Company) specifications. 516.2(k) Anchor Material Last Revised: 4/11/2025 See Section 501.2(p) for a list of approved dowel bar adhesives. Starting in Pub 408, 2020 Initial Edition (April 10, 2020), the Anchor Material section was moved to Section 501.2(p). Anchor material was listed in Section 516.2(k) up to and including Pub 408, 2016 Change No. 7 (October 4, 2019). Product Name Ref. No. 516.2(m) Preformed Cellular Polystyrene (ASTM C578) Last Revised: 9/14/2023 Product Name Ref. No. DuPont, 1501 Larkin Center Drive, Midland, MI 48674 https://www.dupont.com/brands/styrofoam.html DOW-3 15 Preformed Cellular Polystyrene DuPont High Performance Underlayment 1999-181Q 38 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 516: Concrete Pavement Patching 516.2(m) Preformed Cellular Polystyrene (ASTM C578) Last Revised: 9/14/2023 Product Name Ref. No. Alleguard, 2571 Mitchell Ave., Allentown, PA 18103 https://alleguard.com/ INSYA 15 Formerly Insulation Corporation of America Preformed Cellular Polystyrene ICA-LITE EPS (ASTM C578 Types I, II, VIII, IX) 1992-167 Owens Corning, One Owens Corning Parkway, Toledo, OH 43659 http://www.owenscorning.com/ OWENC 15 Preformed Cellular Polystyrene Foamular 1000 (ASTM C578, Type V) 2002-005Q Preformed Cellular Polystyrene Foamular 150 (ASTM C578, Type X) 2002-005Q Preformed Cellular Polystyrene Foamular 250 (ASTM C578, Type IV) 2002-005Q Preformed Cellular Polystyrene Foamular 400 (ASTM C578, Type VI) 2002-005Q Preformed Cellular Polystyrene Foamular 600 (ASTM C578, Type VII) 2002-005Q 39 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 523: Ultra-Thin Portland Cement Concrete Overlay 523.2(a) Virgin Polypropylene Fibers Last Revised: 4/17/2025 Approved for contracts let before October 6, 2023 or Pub 408/2020 (Change 6) and earlier. Product Name Ref. No. Forta Corporation, 100 Forta Drive, Grove City, PA 16127 https://fortacorp.com/ FORTA 15 Virgin Polypropylene Fibers Forta Econo Net 2010-201Q 40 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 525: Concrete Pavement Partial-Depth Repair 525.2(c) Rapid-Set Concrete Patching Material Last Revised: 3/2/2026 Product Ref. No. Name NTPEP Test Number FasTrac Construction Products, 1150 SE Hamblen Road, Lee's Summit, MO 64063 https://www.fastracproducts.com/ CCMAT 15 Facility 101 East Walnut Street Archie, MO 64725 Rapid-Setting Concrete FasTrac 246 Concrete 2018-197Q RSCP-2017-01-004 Cannot be used with aggregate extenders (FasTrac 246 Concrete already includes aggregate and cannot be extended further). Meets the requirements of R1 and R2 material in ASTM C928. Euclid Chemical Company, 19215 Redwood Road, Cleveland, OH 44110-2799 http://www.euclidchemical.com/ EUCLD 15 Cementitious Repair Mortar Euco Repair SCC Fast 2019-036Q RSCP-2017-01-014 Cannot be used with aggregate extenders (See Precautions/Limitations section of Technical Data Sheet). Meets the requirements of R1, R2, and R3 material in ASTM C928. Phoscrete Corporation, 792 Northeast 40th Court, Oakland Park, FL 33334 https://phoscrete.com/ PHOS1 15 Plant 1755 North Butterfield Road Libertyville, IL 60048 Magnesium, Phosphate Cement-Based Material Phoscrete Formula 1-HC (Horizontal/Castable) 2017-104Q RSCP-2015-01-002 Cannot be used with aggregate extenders (See Limitations section of Technical Data Guide). Meets the requirements of R1 and R2 material in ASTM C928. Formerly known as Phoscrete HC. Sika Corporation, 201 Polito Avenue, Lyndhurst, NJ 07071 https://usa.sika.com/ SIKA1 15 Plant 1682 Marion Williamsport Road E Marion, OH 43302 Cementitious Repair Mortar SikaQuick VOH 2018-026Q RSCP-2014-01-004 Cannot be used with aggregate extenders. Meets the requirements of R1 and R2 material in ASTM C928. For Section 525.2(c), SikaQuick VOH is only approved for use on horizontal surfaces. Rapid-Setting Concrete Sikacrete 421 CI Rapid 2019-084Q RSCP-2017-01-005 Cannot be used with aggregate extenders (Sikacrete 421 CI Rapid already includes aggregate and cannot be extended further). Meets the requirements of R1, R2, and R3 material in ASTM C928. 525.2(g) Preformed Cellular Polystyrene (ASTM C578) See Section 516.2(m) for approved preformed cellular polystyrene products. 41 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 527: Dowel Retrofit 527.2(c) Preformed Cellular Polystyrene 527.2(d) Rapid-Set Concrete Patching Material See Section 525.2(c) for approved rapid set concrete patching material products. 42 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 529: Full Depth Individual Precast/Prestressed Concrete Pavement Slabs 529.2 Precast Concrete Pavement Slab Last Revised: 2/25/2020 Product Name Ref. No. COA Fort Miller Company, Inc., P.O. Box 98, Schuylerville, NY 12871-0098 http://www.fortmiller.com/ FTML1 15 Precast Concrete Pavement Slab Super-Slab Precast Concrete Pavement System (PCPS) 2009-124 Full Depth Concrete Pavement Repair, Precast: Item 9516-2034 - 10" Depth and Item 9516-3036 - 12" Depth Conditionally approved as an alternate Type A patch per Fort Miller Company's specifications. Fort Miller Company is a licensor, fabricator, and trademark owner of Super-Slab. Northeast Precast, 4081 S Lincoln Avenue, Vineland, NJ 08361 http://www.northeastprecast.com/ NORPR 15 Precast Concrete Pavement Slab Super-Slab Precast Concrete Pavement Panel Fabricator 2017-221 Full Depth Concrete Pavement Repair, Precast: Item 9000-0516 - 13" Depth Conditionally approved as an alternate Type A patch per the Super-Slab licensor's (Fort Miller Company) specifications. 43 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 530: Long-Life Concrete Pavement (LLCP) 530.2(e)1.c Long-Life Dowel Bar Last Revised: 4/13/2022 For contracts let on or after April 10, 2020 (Pub 408, 2020 Initial Edition), see Section 705.3(f) High Performance Dowel Bars. Product Name Ref. No. ARTAZN LLC (formerly Jarden Zinc Products), 2500 Old Stage Road, Greeneville, TN 37744 https://artazn.com/ JAR-1 15 Plant 2500 Old Stage Road Greeneville, TN 37744 Rolled Zinc Alloy Tubular Dowel Bar LifeDowel, Type 2 (1.445" OD) 2016-164Q Outside diameter of the approved dowel bar with zinc sleeve is 1.445". Nonmetallic caps on the ends of the tube that do not exceed the outside diameter of the tube can be used. Rolled Zinc Alloy Tubular Dowel Bar LifeDowel, Type 2 (1.695" OD) 2016-164Q Outside diameter of the approved dowel bar with zinc sleeve is 1.695". Nonmetallic caps on the ends of the tube that do not exceed the outside diameter of the tube can be used. 44 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 548: Unbonded Concrete Overlay of Concrete-Surfaced Pavements 548.2(a) Non-Woven Geotextile Interlayer Last Revised: 12/8/2021 Product Ref. No. Name NTPEP Test Number SOLMAX, 428 Rollins Industrial Blvd., Ringgold, GA 30736 https://www.solmax.com/us/en PROP2 15 Formerly Propex Operating Company Non-Woven Geotextile Interlayer GEOTEX 1341NH 2018-071Q SKAPS Industries Nonwoven Division, USA - Headquarter, 335 Athena Drive, Athens, GA 30601 http://www.skaps.com/ SKA-2 15 Plant 335 Athena Drive Athens, GA 30601 Non-Woven Geotextile Interlayer GT116 2021-086Q GTX-2018-01-167 548.2(d) Virgin Polypropylene Fibers Last Revised: 4/17/2025 Product Name Ref. No. Forta Corporation, 100 Forta Drive, Grove City, PA 16127 https://fortacorp.com/ FORTA 15 Virgin Polypropylene Fibers Forta Econo Net 2010-201Q Sika Corporation, 201 Polito Avenue, Lyndhurst, NJ 07071 https://fibermesh.com/ SIKA9 15 Plant Fibermesh Division 4019 Industry Drive Chattanooga, TN 37416 Virgin Polypropylene Fibers SikaFiber Enduro-600 2024-093Q 45 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)3a Round and Elliptical Reinforced Concrete (RC) Pipe Last Revised: 5/15/2025 Companies maintaining an American Concrete Pipe Association Q-Cast certification or NPCA Pipe certification do not require in-plant inspection for standard design concrete pipe (any diameter). All special design pipe will receive in-plant inspection and an inspection stamp, regardless of the manufacturer’s certification status. Special design pipe are identified as those pipe for which the Department has not provided a standard design in BD-636. Special design pipe are identified in BD-636 by a double asterisk (**). Pipe produced by Q-Cast or NPCA certified companies will be stenciled or stamped with the respective logos. Product Ref. No. Name Pipe Certification Eagle Concrete Materials, LLC, 1019 East Bakersville-Edie Road, Somerset, PA 15501 https://primecontractorsupply.com/ EAGLE 15 Formerly Eagle Concrete Products RC Pipe (End Section) ----- NPCA RC Pipe (Round) ----- NPCA Rinker Materials, a QUIKRETE Company, 19500 State Highway 249, Suite 540, Houston, TX 77070 https://www.rinkerpipe.com/ HANS3 15 Formerly Forterra RC Pipe (Elliptical) - ACPA QCast RC Pipe (Round) ----- ACPA QCast Rinker Pipe, a QUIKRETE Company, 19500 State Highway 249, Suite 540, Houston, TX 77070 https://www.rinkerpipe.com/ HYDR1 15 Plant 2000 Gregg Station Road Oakdale, PA 15071 RC Pipe (Elliptical) ----- ACPA QCast RC Pipe (End Section) ----- ACPA QCast RC Pipe (Round) ----- ACPA QCast Rinker Materials, a QUIKRETE Company, 19500 State Highway 249, Suite 540, Houston, TX 77070 https://www.rinkerpipe.com/ HYDR2 15 Plant 800 Industrial Drive Middletown, DE 19709 RC Pipe (Elliptical) ----- ACPA QCast RC Pipe (End Section) ----- ACPA QCast RC Pipe (Round) ----- ACPA QCast 46 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)3a Round and Elliptical Reinforced Concrete (RC) Pipe Last Revised: 5/15/2025 Companies maintaining an American Concrete Pipe Association Q-Cast certification or NPCA Pipe certification do not require in-plant inspection for standard design concrete pipe (any diameter). All special design pipe will receive in-plant inspection and an inspection stamp, regardless of the manufacturer’s certification status. Special design pipe are identified as those pipe for which the Department has not provided a standard design in BD-636. Special design pipe are identified in BD-636 by a double asterisk (**). Pipe produced by Q-Cast or NPCA certified companies will be stenciled or stamped with the respective logos. Product Ref. No. Name Pipe Certification Rinker Materials, A QUIKRETE Company, 19500 State Highway 249, Suite 540, Houston, TX 77070 http://www.rinkerpipe.com/ HYDR4 15 Plant 1751 Monocacy Blvd. Frederick, MD 21701 RC Pipe (Elliptical) 2022-266Q ACPA QCast RC Pipe (End Section) 2024-216Q ACPA QCast RC Pipe (Round) 2022-266Q ACPA QCast Oldcastle Infrastructure, Inc., A CRH Company, 1900 Pennsylvania Ave., Croydon, PA 19021 http://www.oldcastleprecast.com/Pages/default.aspx OLDP1 15 RC Pipe (End Section) ----- ACPA QCast RC Pipe (Round) ----- ACPA QCast Oldcastle Infrastructure, Inc., A CRH Company, 7000 Central Parkway, Suite 800, Atlanta, GA 30328 https://oldcastleinfrastructure.com/ OLDP5 15 Plant 1401 Trimble Road Edgewood, MD 21040 RC Pipe (Elliptical) 2023-176Q ACPA QCast Oldcastle Infrastructure, Inc., A CRH Company, 7000 Central Parkway, Suite 800, Atlanta, GA 30328 https://oldcastleinfrastructure.com/ OLP-1 15 Plant 200 Keystone Drive Telford, PA 18969 RC Pipe (Elliptical) 2025-086Q ACPA QCast RC Pipe (End Section) 2020-108Q NPCA Approved to fabricate both round and elliptical flared end sections. Upper Peninsula Concrete Pipe, 6480 US-2 & 41, Escanaba, MI 49829 http://upconcretepipe.net/ UPPCP 15 RC Pipe (End Section) ----- NPCA 47 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)3a Round and Elliptical Reinforced Concrete (RC) Pipe Last Revised: 5/15/2025 Companies maintaining an American Concrete Pipe Association Q-Cast certification or NPCA Pipe certification do not require in-plant inspection for standard design concrete pipe (any diameter). All special design pipe will receive in-plant inspection and an inspection stamp, regardless of the manufacturer’s certification status. Special design pipe are identified as those pipe for which the Department has not provided a standard design in BD-636. Special design pipe are identified in BD-636 by a double asterisk (**). Pipe produced by Q-Cast or NPCA certified companies will be stenciled or stamped with the respective logos. Product Ref. No. Name Pipe Certification Vianini Pipe Inc., 81 County Line Road, Branchburg, NJ 08876 http://www.vianinipipe.com/ VIANN 15 RC Pipe (Elliptical) ----- ACPA QCast RC Pipe (End Section) ----- ACPA QCast RC Pipe (Round) ----- ACPA QCast 601.2(a)3a Reinforced Concrete (RC) Pipe (Related Items) Last Revised: 10/16/2025 Plasticizing admixtures under this section may only be used in the production of reinforced concrete pipes. Product Name Ref. No. Chryso Inc., 100 Research Drive, Wilmington, MA 01887 https://www.chrysoinc.com/ CHRYS715 Plant 6051 West 65th St. Bedford Park Chicago, IL 60638 Formerly: GCP Applied Technologies Inc. (GRAC7 15) Plasticizing Admixture DQuantec PL-466 (formerly DBM-S) 1992-285 Concrete Accessory Manufacturing, 211 East Dowland Street, Ludington, MI 49431 http://www.camsales.com/ CONAM 15 RC Pipe (Related Item) Camlock Spacers (Pub. 280) 1994-250 RC Pipe (Related Item) Quik-Fit Stirrup Mat (Pub. 280) 1994-249 Insteel Wire Products, 1200 N. Warpole Street, Upper Sandusky, OH 43351 https://insteel.com/ ENGWP 15 Formerly Engineered Wire Products, Inc.(Liberty Steel USA) RC Pipe (Related Item) “S” Stirrup Assemblies 2003-198Q Effective 10/25/24, the new supplier code for the Upper Sandusky, OH facility is INST3 15. 48 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)3a Reinforced Concrete (RC) Pipe (Related Items) Last Revised: 10/16/2025 Plasticizing admixtures under this section may only be used in the production of reinforced concrete pipes. Product Name Ref. No. Haala Industries, Inc., 1201 Hwy 4 South, Sleepy Eye, MN 56085 HAALA 15 Reinforced Concrete Pipe Cages Fabricator of Welded Steel Cages for Reinforced Flared End Sections 2016-245Q Insteel Wire Products, 1373 Boggs Drive, Mount Airy, NC 27030 https://insteel.com/ INST3 15 Plant 1200 North Warpole Street Upper Sandusky, OH 43351 Formerly Engineered Wire Products RC Pipe (Related Item) “S” Stirrup Assemblies 2003-198Q Krete Industries, P. O. Box 343, Butler, WI 53007 http://www.krete.com/ KRETE 15 Plasticizing Admixture KreteMix 100 (formerly Krete Econo Plast) 1992-343 Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-us MBS-1 15 Plant Allentown, PA Plasticizing Admixture for Dry-Cast Manufacturing Only (S-PA) MasterCast 1000 2023-130Q Provisionally Approved. Under provisional approval, the Department will monitor its use, application, and performance for an additional year (10/15/2025 to 10/15/2026). Recommended Dosage: 2 to 12 oz/cwt Plasticizing Admixture for Dry-Cast Manufacturing Only (S-PA) MasterCast 900 (RheoFIT 900) 2013-024Q Recommended Dosage: 2 to 12 oz/cwt 49 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)3a Reinforced Concrete (RC) Pipe (Related Items) Last Revised: 10/16/2025 Plasticizing admixtures under this section may only be used in the production of reinforced concrete pipes. Product Name Ref. No. Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-us MBS-2 15 Plant Gurnee, IL Formerly BASF Construction Chemicals (BAS-2 15) Plasticizing Admixture for Dry-Cast Manufacturing Only (S-PA) MasterCast 1000 2023-130Q Provisionally Approved. Under provisional approval, the Department will monitor its use, application, and performance for an additional year from 10/15/2025 to 10/15/2026. Recommended Dosage: 2 to 12 oz/cwt Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-us MBS-3 15 Plant Tipp City, OH Plasticizing Admixture for Dry-Cast Manufacturing Only (S-PA) MasterCast 1000 2023-130Q Provisionally Approved. Under provisional approval, the Department will monitor its use, application, and performance for another year from 10/15/2025 to 10/15/2026. Recommended Dosage: 2 to 12 oz/cwt Sika Corporation, 201 Polito Avenue, Lyndhurst, NJ 07071 http://usa.sika.com/ SIKA3 15 Plant 150 Ben Fairless Drive Fairless Hills, PA Plasticizing Admixture for Dry-Cast Manufacturing Only (S-PA) SikaMix PL-100 2016-282Q 601.2(a)4.a Metal Pipes - Ductile Iron Pipe Last Revised: 4/29/2024 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. * ASTM A716 - Standard Specification for Ductile Iron Culvert Pipe - Required pipe markings: 1. Manufacturing mark, 2. Country where cast, 3. Year pipe produced, 4. Letters "DI" or "DUCTILE", 5. Not less than 1/2" in height and legible, 6. Located near the bell and cast or metal stamped Product Name Ref. No. AMERICAN (American Cast Iron Pipe Company), P.O. Box 2727, Birmingham, AL 35202 http://www.american-usa.com/ AMECI 15 50 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.a Metal Pipes - Ductile Iron Pipe Last Revised: 4/29/2024 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. * ASTM A716 - Standard Specification for Ductile Iron Culvert Pipe - Required pipe markings: 1. Manufacturing mark, 2. Country where cast, 3. Year pipe produced, 4. Letters "DI" or "DUCTILE", 5. Not less than 1/2" in height and legible, 6. Located near the bell and cast or metal stamped Product Name Ref. No. AMERICAN (American Cast Iron Pipe Company), P.O. Box 2727, Birmingham, AL 35202 http://www.american-usa.com/ AMECI 15 Plant 1500 32nd Avenue North Birmingham, AL 35207 Ductile Iron Pipe 2010-186Q ~ Approved MM-USA marking as Identifiable Steel McWane Ductile - New Jersey, 183 Sitgraves Street, Philipsburg, NJ 08865 http://mcwaneductile.com/ MCWD1 15 Ductile Iron Pipe ----- U.S. Pipe and Foundry Co., A Quikrete Company, Two Chase Corporate Drive, Suite 200, Birmingham, AL 35244 https://www.uspipe.com/ USP&F 15 Plant Lynchburg, VA Ductile Iron Pipe 3" to 16" Ductile Iron PIpes 1983-085 ~ Approved MM-USA marking as Identifiable Steel U.S. Pipe and Foundry Co., A Quikrete Company, Two Chase Corporate Drive, Suite 200, Birmingham, AL 35244 http://www.uspipe.com USPF1 15 Plant 2023 St. Louis Avenue Bessemer, AL 35020 Marvel City Minimill & Bessemer Plant are on the same campus Ductile Iron Pipe TYTON JOINT Pipe 2015-087Q 4" to 12" pipes are produced at Marvel City Minimill & 12" to 64" pipes are produced at Bessemer Plant Approved MM-USA marking as Identifiable Steel 601.2(a)4.b Metal Pipes - Corrugated Steel Pipe, Metallic Coated Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON03 15 Plant Conyers, GA 51 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.b Metal Pipes - Corrugated Steel Pipe, Metallic Coated Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON03 15 Plant Conyers, GA Corrugated Steel Pipe, Metallic Coated ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON05 15 Plant Ashland, KY Corrugated Steel Pipe, Metallic Coated ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON07 15 Plant Shakopee, MN Corrugated Steel Pipe, Metallic Coated ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON08 15 Plant Palmer, MA Corrugated Steel Pipe, Metallic Coated ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON11 15 Plant Raleigh, NC Corrugated Steel Pipe, Metallic Coated ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON12 15 Plant Greencastle, PA Corrugated Steel Pipe, Metallic Coated ----- Culverts, Inc., 330 Pittsburgh Ave., P.O. Box 271, Coraopolis, PA 15108 https://culvertsinc.com/ CULVE 15 Corrugated Steel Pipe, Metallic Coated ----- J & J Drainage Products Company, 110 N Pershing, PO Box 0829, Hutchinson, KS 67504-0829 http://jjdrainage.com/ J&J-D 15 Related Hardware Band Angle 1984-073 52 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.b Metal Pipes - Corrugated Steel Pipe, Metallic Coated Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Lane Enterprises, Inc., 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE1 15 Plant 16 May Street Bath, NY 14810 Corrugated Steel Pipe, Metallic Coated ----- Lane Enterprises, Inc., 3905 Hartzdale Drive, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE2 15 Plant 682 Quaker Valley Road Bedford, PA 15522 Corrugated Steel Pipe, Metallic Coated ----- Lane Enterprises, Inc., 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE3 15 Plant Long Span Bridge & Culvert Structural Plate, Gabion Baskets 8271 Mercer Street, P.O. Box 345 Pulaski, PA 16143 Corrugated Steel Pipe, Metallic Coated ----- Lane Enterprises, Inc, 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE4 15 Plant 377 Crooked Lane King of Prussia, PA 19406 Corrugated Steel Pipe, Metallic Coated ----- Nucor-LMP Inc, 2000 East First Street, Maryville, MO 64468 LMP-S 15 Formerly LMP Steel & Wire Company Related Hardware A-307 Grade A, 6" and 8" Electroplated, CMP Band Bolts 1991-120AB 601.2(a)4.c Metal Pipes - Corrugated Aluminum Alloy Pipe Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON03 15 Plant Conyers, GA Corrugated Aluminum Alloy Pipe ----- 53 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.c Metal Pipes - Corrugated Aluminum Alloy Pipe Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON04 15 Plant Mitchell, IN Corrugated Aluminum Alloy Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON07 15 Plant Shakopee, MN Corrugated Aluminum Alloy Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON08 15 Plant Palmer, MA Corrugated Aluminum Alloy Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON11 15 Plant Raleigh, NC Corrugated Aluminum Alloy Pipe ----- Culverts, Inc., 330 Pittsburgh Ave., P.O. Box 271, Coraopolis, PA 15108 https://culvertsinc.com/ CULVE 15 Corrugated Aluminum Alloy Pipe ----- Lane Enterprises, Inc., 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE1 15 Plant 16 May Street Bath, NY 14810 Corrugated Aluminum Alloy Pipe ----- Lane Enterprises, Inc., 3905 Hartzdale Drive, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE2 15 Plant 682 Quaker Valley Road Bedford, PA 15522 Corrugated Aluminum Alloy Pipe ----- Lane Enterprises, Inc., 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE3 15 Plant Long Span Bridge & Culvert Structural Plate, Gabion Baskets 8271 Mercer Street, P.O. Box 345 Pulaski, PA 16143 Corrugated Aluminum Alloy Pipe ----- 54 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.c Metal Pipes - Corrugated Aluminum Alloy Pipe Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Lane Enterprises, Inc, 3905 Hartzdale Drive, Suite 514, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE4 15 Plant 377 Crooked Lane King of Prussia, PA 19406 Corrugated Aluminum Alloy Pipe ----- 601.2(a)4.d Metal Pipes - Coated Corrugated Galvanized Steel Pipe Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON03 15 Plant Conyers, GA Coated Corrugated Galvanized Steel Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON08 15 Plant Palmer, MA Coated Corrugated Galvanized Steel Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON11 15 Plant Raleigh, NC Coated Corrugated Galvanized Steel Pipe ----- Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON12 15 Plant Greencastle, PA Coated Corrugated Galvanized Steel Pipe ----- Culverts, Inc., 330 Pittsburgh Ave., P.O. Box 271, Coraopolis, PA 15108 https://culvertsinc.com/ CULVE 15 Coated Corrugated Galvanized Steel Pipe ----- 55 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)4.d Metal Pipes - Coated Corrugated Galvanized Steel Pipe Last Revised: 6/27/2017 Steel Products Procurement Act applies. Note: Approved pipe manufacturers listed in this section may also provide end sections and slope pipe fittings. Product Name Ref. No. The Dow Chemical Company, 4520 Ashman Street, Building 9008, Customer Info., Midland, MI 48642 http://www.dow.com/ DOW-2 15 Related Hardware Trenchcoat DAF 625 1990-304 Plastic coating for galvanized steel pipe Lane Enterprises, Inc., 3905 Hartzdale Drive, Camp Hill, PA 17011 http://www.lane-enterprises.com/ LANE2 15 Plant 682 Quaker Valley Road Bedford, PA 15522 Coated Corrugated Galvanized Steel Pipe ----- Pure Asphalt Company, 3455 West 31st Place, Chicago, IL 60623 http://www.pureasphalt.com/ PUREA 15 Related Hardware Culvert Mastic (Spray Grade) 1990-270 Also listed under Section 702 601.2(a)6.a Thermoplastic Pipes - Group I Last Revised: 5/27/2025 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL Contech Engineered Solutions, a QUIKRETE Company, 5 Concourse Parkway, Suite 1900, Atlanta, GA 30328 http://www.conteches.com/ CON10 15 Plant Springfield, IL Polyvinyl Chloride (PVC) Liner PS 46, A-2000 Pipe with Inline Bell 2010-238QB Type S 12", 15", 18", 21", 24", 30", 36" A2 liner pipe. Approved for 2’ minimum fill height, 36’ maximum fill height. Polyvinyl Chloride (PVC) Pipe A-2000 Pipe 2000-326Q Type S 15", 18", 21", 24", 30", 36" 15" in. size pipe can only be used for maintenance. 56 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)6.a Thermoplastic Pipes - Group I Last Revised: 5/27/2025 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL ISCO Industries, Inc., 100 Witherspoon Street 2 West, Louisville, KY 40202 https://isco-pipe.com/applications/culvert-rehab/ ISCFB 15 Facility 190 Spartan Exchange Rd. Wellford, SC 29385 High Density Polyethylene (HDPE) Liner Snap-Tite 2016-249M Type S Liner Sizes: 14”, 16”, 18”, 20”, 22”, 24”, 26”, 28”, 30”, 32”, 36”, 42”, 48”, 54”, 63” The Snap-Tite culvert liner is for use on rehabilitation projects for lining existing corrugated metal pipes, reinforced concrete pipes, and concrete culverts. For fill heights of greater than 15’, a project-by-project design approval is required. JM Eagle, 5200 West Century Boulevard, Los Angeles, CA 90045 http://www.jmeagle.com/ JMMC1 15 Plant J-M Manufacturing Company 315 Grant Street Franklin, PA 16323 Polyvinyl Chloride (PVC) Pipe 1995-314 Type S 18", 21", 24", 30", 36", 42", 48" Performance Pipe a Division of Chevron Phillips Chemical Company, 5085 W. Park Blvd. Suite 500, Plano, TX 75093 https://www.cpchem.com/what-we-do/solutions/performance-pipe PERPI 15 High Density Polyethylene (HDPE) Pipe 1994-094 Type S 18”, 21”, 24”, 30”, 36”, 42”, 48” SDR<21 High Density Polyethylene (HDPE) Pipe 1994-094 Type S 21”, 24”, 30”, 36”, 42”, 48” SDR=26 57 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)6.a Thermoplastic Pipes - Group I Last Revised: 5/27/2025 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL JM Eagle, 1742 E. Platteville Blvd., Pueblo West, CO 81007 http://www.jmeagle.com/ PWEGL 15 Formerly PW Eagle Polyvinyl Chloride (PVC) Pipe 1988-029 Type S 15”, 18”, 21”, 24”, 30” 15" size pipe is for maintenance uses only. Polyvinyl Chloride (PVC) Pipe 1997-007 Type S 30", 36" (corrugated) Westlake Pipe & Fittings, Post Oak Bvld, #600, Houston, TX 77056 https://www.westlakepipe.com/en ROYAL 15 Plant 88 Newport Road Leola, PA 17540 Polyvinyl Chloride (PVC) Pipe 2002-012Q Type S 15", 18”, 21”, 24” 15" size pipe for maintenance only. 601.2(a)6.b Thermoplastic Pipes - Group II Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. 601.2(a)6.c Thermoplastic Pipes - Group III Last Revised: 1/26/2024 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL Advanced Drainage Systems Inc., 4640 Trueman Blvd, Hilliard, OH 43026 https://www.adspipe.com/ ADS-1 15 Plant 173 Industrial Park North Muncy, PA 17756 58 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)6.c Thermoplastic Pipes - Group III Last Revised: 1/26/2024 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL Advanced Drainage Systems Inc., 4640 Trueman Blvd, Hilliard, OH 43026 https://www.adspipe.com/ ADS-1 15 Plant 173 Industrial Park North Muncy, PA 17756 High Density Polyethylene (HDPE) Pipe N-12 1995-322 Type S 15”, 18”, 24”, 30” 15" size pipe for maintenance only. High Density Recycled Polyethylene (HDPE) Pipe N-12 (Model Number 30850020IBR) 2020-154Q Type S 30" Contains recycled content. Advanced Drainage Systems, Inc., 4640 Trueman Blvd., Hilliard, OH 43026 https://www.adspipe.com/ ADS-1015 Plant 1 William Donnelly Parkway Waverly, NY 14892 Formerly Hancor, Inc. (HANC1 15) High Density Polyethylene (HDPE) Pipe ----- Type S 15”, 18”, 21”, 24”, 30" 15" size pipe for maintenance use only. 59 BULLETIN 15 (Publication 35) Qualified Products List for Construction Posted: 3/6/2026 8:34:08AM Section 601: Pipe Culverts 601.2(a)6.c Thermoplastic Pipes - Group III Last Revised: 1/26/2024 Type S: This pipe shall have a full circular cross section, with an outer corrugated pipe wall and a smooth inner liner. Corrugations may be either annular or helical. Thermoplastic pipe fittings, gaskets, and couplers for joints are not listed in Bulletin 15. Approved thermoplastic pipe manufacturers may also provide additional fittings, gaskets, or couplers to meet site specific project requirements. Product Ref. No. Name Thermo Type Pipe Size SOL Advanced Drainage Systems, Inc., 4640 Trueman Blvd., Hilliard, OH 43026 https://www.adspipe.com/ ADS-1115 Plant 400 E High Street London, OH 43140 High Density Polyethylene (HDPE) Pipe N-12 (Model Number 15850020IB) 2021-215Q Type S 15" 15" size pipe for maintenance use only. High Density Polyethylene (HDPE) Pipe N-12 (Model Number 18850020IB) 2021-185Q Type S 18" High Density