22 mm Push Button Specifications

300,000 Cycles Twist-to-release E-stop, illuminated push-pull E-stop (5) , alternate action push buttons 100,000 Cycles Potentiometer, toggle switch Operating forces (typical with one contact block) Flush/extended = 5 N, E-stop = 36 N Mushroom = 9 N Operating torque (typical application with one contact block) Selector switch = 0.25 N•m (2.2 lb•in) Mounting torque Plastic 1.7 N•m (15 lb•in) Metal 4.4 N•m (40 lb•in) Table 2 - IP69K Operators and Assembled Stations IP69K Rated Operators IP69K Rated Assembled Stations • 800FD-MT44* • 800FP-F* • 800FP-F* with 800F-AB7 • 800FP-LF* • 800FP-E* • 800FP-E* with 800F-ABE7 • 800FP-LE* • 800FP-FA* • 800FP-LFA* • 800FP-G* • 800FP-P* • 800FP-MT3* • 800FP-MT4* • 800FP-LMT4* • 800FP-MT6* • 800FP-LMT6* • 800FP-LMP3* • 800FP-MP4* • 800FP-LMP4* • 800FP-MM4* • 800FP-LMM4* • 800FP-MM6* • 800FP-LMP6* • 800FP-MP9* • 800FP-LMP9* • 800FP-U2* • 800FP-LU2* • 800FP-U3* • 800FP-MM9* • 800FP-POT* • 800F-1YP1 • 800F-1YP2 • 800F-1YP3 • 800F-1YP7 • 800F-1YP8 • 800F-1YM1 • 800F-1YM2 • 800F-1YM3 • 800F-1YM7 • 800F-1YM8 • 800F-1YML1 • 800F-1YML2 • 800F-1YML3 • 800F-1YMD51 • 800F-1YMD52 • 800F-1YMD81 • 800F-1YMD and 800F-ALC2 (1 pc) and IP69K rated operators • 800F-2PM and 800F-ALC2 (2 pcs) and IP69K rated operators • 800F-3PM and 800F-ALC2 (3 pcs) and IP69K rated operators • 800F-4PM and 800F-ALC2 (4 pcs) and IP69K rated operators • 800F-6PM and 800F-ALC2 (6 pcs) and IP69K rated operators • 800F-AHA1 • 800F-1YMD51, 800F-1YMD52, and 800F-1YMD81 Table 3 - Environmental — Operators Attribute Plastic (Bulletin 800FP) Metal (Bulletin 800FM) Temperature Range Operating -25…+70 °C (-13…+158 °F) (1) (1) Operating temperatures below 0 °C (32 °F) are based on the absence of freezing moisture and liquids, UL Recognized to 55 °C (131 °F) - Incandescent module max. 40 °C (104 °F). Short-term Storage -40…+85 °C (-40…+185 °F) Humidity ≤95% RH from 25…60 °C (77…140 °F) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 5 Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components IMPORTANT Performance Data — Performance data that is given in this publication is provided only as a guide for you to determine suitability and does not constitute a performance warranty of any kind. Such data can represent the results of accelerated testing at elevated stress levels, and you are responsible for correlating the data to actual application requirements. ALL WARRANTIES AS TO ACTUAL PERFORMANCE, WHETHER EXPRESS OR IMPLIED, ARE EXPRESSLY DISCLAIMED. Table 4 - Electrical Ratings — Back-of-panel Components Attribute Screw Termination Spring Clamp Termination Standard Contact Block Ratings A600, Q600 600V AC A300, Q300 300V AC AC 15, DC 13 to IEC/EN 60947-5-1 and UL 508, 17V, 5 mA min. Low-voltage Contact Block Ratings (1) (1) Low-voltage contacts are recommended for applications below 17V, 5 mA. 5V, 1 mA DC min. C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508 Light-emitting diode (LED) Module Ratings Lamp Voltage Voltage Range Current, Typical Leakage Current Frequency Universal 24V AC 24V DC 120V AC 240V AC 24…120V AC/DC 10…29V AC 10…30V DC 102…132V AC 204…264V AC 15 mA (AC), 12 mA (DC) 31 mA 24 mA 6 mA 6 mA 3 mA 3 mA 3 mA 3 mA 3 mA 50/60 Hz, DC 50/60 Hz DC 50/60 Hz 50/60 Hz Thermal Current 10 A max. enclosed (40 °C [104 °F] ambient) to UL508, EN 60947-5-1 @ A600 Insulation Voltage (Ui ) Screw terminal = 690V, spring-clamp = 300V Wire Capacity Screw Terminal (2) (2) Wires less than #18 AWG (0.75 mm 2 ) may not hold in terminal securely. #18…12 AWG (0.75…2.5 mm²); Max. (2) #14 AWG or (1) #12 AWG Spring-clamp terminal #18…14 AWG (0.75…1.5 mm²) One per spring clamp, two spring clamps per terminal Recommended Tightening Torque on Screw Terminals 0.7…0.9 N•m (6…8 lb•in) Dielectric Strength (Minimum) 2500V for 1 minute External Short Circuit Protection Standard blocks 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) Low-voltage contact blocks 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) Electrical shock protection Fingersafe conforming to IP2X Table 5 - Mechanical Ratings — Back-of-panel Components Attribute Value Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. 6 hr Shock Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max. Contact durability per EN 60947-5-1 (Annex C) 10,000,000 cycles Contact operation N.O. Slow double make and break N.C. & S.M.C.B. Slow double make and break — positive opening N.O.E.M. Double break / double make, early make N.C.L.B. Double break / double make, late break — positive opening N.C.E.B. Double break / double make, early break — positive opening Push button travel to change electrical state N.C. and N.O.E.M. 1.5 mm (0.060 in.) N.O. and N.C.L.B. 2.5 mm (0.1 in.) Operating forces (typical) Single-circuit contact block 3.4 N Dual-circuit contact block 5…6.5 N → → → 6 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Material Listing Table 6 - Illumination — Back-of-panel Components Attribute Green Red White LED Dominant Wavelength 525 nm 629 nm — LED Luminous Intensity 780 mcd 780 mcd 360 mcd Incandescent maximum wattage 2.6 W Table 7 - Materials — Back-of-panel Components Attribute Value Springs Stainless steel and zinc coated music wire Electrical contacts Standard Silver-nickel Low-voltage Gold-plated over silver Terminals Screw Brass Spring-clamp Silver-plated brass Component For Use with Material Used Panel gasket All operators Nitrile, TPE Diaphragm seal Illuminated push button, non-illuminated push button Automotive industry acceptable silicone K-seal Selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, push/pull mushroom Nitrile Diaphragm retainer, return spring I Illuminated push button, non-illuminated push button, momentary mushroom Stainless steel Return spring II Reset, selector switch, key selector switch, alternate action, push/twist-to-release E-stop, key E-stop, push/pull mushroom Zinc-coated music wire Button cap/mushroom head Non-illuminated push button, momentary mushroom, reset, push/twist-to-release E-stop, key E-stop, push/pull mushroom, multi-function PBT/polycarbonate blend 2-color molded button cap Non-illuminated push button PBT/polycarbonate blend Lens Multi-function Acetal Lens, knob Illuminated push button, illuminated momentary mushroom, illuminated selector switch Polyamide Knob Non-illuminated selector switch Glass-filled polyamide Plastic bezel/bushing I Non-illuminated push button, illuminated push button, momentary mushroom, selector switch, key selector switch, push/twist-to-release E-stop, key E-stop, push/pull mushroom, multi-function, reset Glass-filled polyamide Plastic bezel/bushing II, jam nut Pilot light, reset jam nut, reset pushers Glass-filled PBT Metal bezel/bushing All metal operators Zinc Diffuser Illuminated push button, pilot light Polycarbonate Legend frames — Glass-filled polyamide Plastic mounting ring All plastic operators Glass-filled polyamide Metal mounting ring All metal operators Chromated zinc Plastic latch — Glass-filled polyamide Metal latch — Chromated zinc + stainless steel Plastic enclosure — PBT/polycarbonate blend Metal enclosure — Aluminum Terminal screws LED module, incandescent module, contact blocks Zinc-plated steel with chromate Terminals LED module, incandescent module, contact blocks Brass with silver-nickel contacts Spring clamps LED module, incandescent module, contact blocks Stainless steel Lamp socket Incandescent module Brass Housing Incandescent module, LED module Glass-filled polyamide Low-voltage terminals Contact blocks Gold-plated silver-nickel contacts Low-voltage spanner Contact blocks Gold-plated silver-nickel contacts Spanner Contact blocks Brass with silver-nickel contacts Boot Toggle Switch, illuminated push button, non-illuminated push button, multi-function illuminated and non-illuminated Automotive industry acceptable silicone Rockwell Automation Publication 800-TD008F-EN-P - August 2025 7 Bulletin 800F 22.5 mm Push Buttons Momentary Push Button Operators Non-illuminated — Flush, Extended, Guarded Color Package Quantity Flush Extended Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Black 1 800FP-F2 800FM-F2 800FP-E2 800FM-E2 Green 800FP-F3 800FM-F3 800FP-E3 800FM-E3 Red 800FP-F4 800FM-F4 800FP-E4 800FM-E4 800F P – F 3 – a b c d a b c d Operator Construction Operator Type Color Cap Packaging Code Description Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) F Flush 0 Orange Blank 1 per package E Extended 1 White BP 10 per package (3) (3) Only available with no color cap (option 9 from Table c). M Round metal operator (IP66, Type 4/13) G Guarded 2 Black 3 Green 4 Red 5 Yellow 6 Blue 8 Gray (1) (1) Available in flush only. 9 No cap X Assortment pack (2) (2) Assortment pack contains one cap of each color, not available in BP packaging. Flush Operator Cat. No. 800FP-F3 Extended Operator Cat. No. 800FM-E4 Guarded Operator Cat. No. 800FP-G6 8 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Non-illuminated — with Two-color Molded Legend Caps Button Color Text Color Legend Text Package Quantity Flush Extended Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Green White START 1 800FP-F301 800FM-F301 — — I 800FP-F306 800FM-F306 — — Red White STOP 800FP-F402 800FM-F402 800FP-E402 800FM-E402 O — — 800FP-E405 800FM-E405 Black White → 800FP-F208 800FM-F208 800FP-E208 800FM-E208 800F P – F 3 01 a b c d a b c d Operator Construction Operator Type Color Cap Legend Text (1) (2) (3) (4) (1) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor. (2) White and yellow caps have black text. All other color caps have white text. (3) Legend button cap supplied loose for customer installation. (4) For valid combinations, see Table 8. Code Description Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) F Flush 0 Orange Blank No Text E Extended 1 White 01 START M Round metal operator (IP66, Type 4/13) G Guarded 2 Black 02 STOP 3 Green 05 O 4 Red 06 I 5 Yellow 08 → 6 Blue 09 Forward (5) (5) Available for flush only. 10 Reverse (5) 11 R Table 8 - Valid Color Cap/Legend Text Codes Color Text Flush Caps Extended Caps White FORWARD, REVERSE, START, I, →, R →, R Black FORWARD, REVERSE, →, R STOP, O, →, R Green FORWARD, REVERSE, START, I, → → Red FORWARD, REVERSE, STOP, O, → STOP, O, → Yellow FORWARD, REVERSE, → → Blue FORWARD, REVERSE, →, R →, R Flush Operator Cat. No. 800FP-F301 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 9 Bulletin 800F 22.5 mm Push Buttons Illuminated — Flush, Extended, Guarded Push-to-test Push Button Device Schematic Illuminated push buttons can be wired as a push-to-test device by using the following schematic and a catalog number 800F-XD7 diode module (see page 52). Approximate Dimensions — Momentary Operators Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Flush Operator Cat. No. 800FM-LF4 Extended Operator Cat. No. 800FP-LE3 Guarded Operator Cat. No. 800FP-LG3 Color Package Quantity Flush Extended Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Green 1 800FP-LF3 800FM-LF3 800FP-LE3 800FM-LE3 Red 800FP-LF4 800FM-LF4 800FP-LE4 800FM-LE4 Yellow 800FP-LF5 800FM-LF5 800FP-LE5 800FM-LE5 Clear 800FP-LF7 800FM-LF7 800FP-LE7 800FM-LE7 800F P – LE 3 – a b c d a b c d Operator Construction Operator Type Color Cap (1) (1) For custom laser-engraved operator, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Packaging Code Description Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) F Flush 0 Amber (2) (2) When using LED for illumination, a white LED is recommended. Blank 1 per package E Extended 3 Green BP 10 per package (3) (3) Only available with no color cap (9 from Table c). M Round metal operator (IP66, Type 4/13) G Guarded 4 Red 5 Yellow (2) 6 Blue (2) 7 Clear 9 No cap X4 L1 AC L2 L1, + L2, - X1 X3 X2 - + X4 X3 - + X4 X1 X3 X2 - + X4 X3 - + X4 X3 - + X1 X2 X1 X2 X1 X2 X4 X3 - + Cat _ _-N5_ Cat _ _-N7_ Cat _ _-Q5_ Cat _ _-Q7_ Cat _ _-N3_ Cat _ _-Q3_ X1 X2 X1 X2 AC DC 120V AC/240V AC LED 24V AC/DC LED Cat _ _-D _ C 6. . . 120V AC/DC Test Essai Prova Teste Ensayo Signal Segnale Sinal Senãl 10 (0.39) 29.6 (1.17) Illuminated and Non- illuminated Momentary Flush 29.6 (1.17) 14 (0.55) Illuminated and Non-illuminated Momentary Extended 18 (0.71) 29.6 (1.17) Illuminated Momentary Guarded 10 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Alternate Action Operators Non-illuminated Illuminated Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. 800F M – FA 3 a b c a b c Operator Construction Operator Type (1) (1) Must use N.O.E.M. or N.C. contacts. Lens Cap Color(2) (2) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) FA Non-illuminated, flush, alternate action 0 Orange 1 White M Round metal operator (IP66, Type 4/13) 2 Black 3 Green 4 Red 5 Yellow 6 Blue 9 No cap X Assortment pack (3) (3) Assortment pack contains one each of cap colors white, black, green, red, yellow, and blue. 800F P – LFA 3 a b c a b c Operator Construction Operator Type (1) (2) (1) Must use N.O.E.M. or N.C. contacts. (2) LED module is required for illumination, cannot use incandescent module. Color Cap (3) (3) For custom laser-engraved legend cap, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) LFA Illuminated, flush, alternate action 0 Amber (4) (4) Use of a white LED is recommended. 3 Green M Round metal operator (IP66, Type 4/13) 4 Red 5 Yellow (4) 6 Blue (4) 7 Clear 9 No cap Non-illuminated Guarded, Illuminated, and Non-illuminated Alternate Action Push Button Operators Cat. No. 800FM-FA3 Cat. No. 800FP-LFA3 14 (0.55) 29.6 (1.17) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 11 Bulletin 800F 22.5 mm Push Buttons Pilot Light Operators Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Color Package Quantity Plastic Metal Cat. No. Cat. No. Green 1 800FP-P3 800FM-P3 Red 800FP-P4 800FM-P4 Yellow 800FP-P5 800FM-P5 800F P – P 3 – a b c d a b c d Operator Construction Operator Type Lens Color (1) (1) For custom laser-engraved operator, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Packaging Code Description Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) P Diffuser 0 Amber (2) (2) When using LED for illumination, a white LED is recommended. Blank 1 per package 3 Green BP 10 per package (3) (3) Only available with no color cap (Code 9 from Table c). M Round metal operator (IP66, Type 4/13) 4 Red 5 Yellow (2) 6 Blue (2) 7 Clear 9 No cap Pilot Light Operators Plastic Pilot Light Cat. No. 800FP-P7 Metal Pilot Light Cat. No. 800FM-P4 29.6 (1.17) 11 (0.43) 12 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Selector Switch Operators 2-position, Non-illuminated Switching Angle Table 9 - Target Table and Operator Position (1) (1) Target table for spring return from left is reversed from what is shown in the table. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open N.O. O X N.C. X O Color Operator Type Package Quantity Standard Knob Plastic Metal Cat. No. Cat. No. Black with White Insert Maintained (60° switching angle) 1 800FP-SM22 800FM-SM22 800F P – S M2 2 – a b c d e f a b c Operator Construction Operator Type Operator Function Code Description Code Description Code Type P Round plastic operator (IP66, Type 4/4X/13) S Standard knob M2 Maintained (60° switching angle) H Knob lever (1) (1) 30 mm hole spacing does not work if knob lever is used. See page 47 for recommended operator panel spacing. M Round metal operator (IP66, Type 4/13) L2 Spring return from left (60° switching angle) R2 Spring return from right (60° switching angle) d e f Knob/Insert Color Orientation Packaging Code Knob Color Insert Color Code Description Code Description 2 Black White Blank Standard Blank 1 per package N 90° offset (2) (2) For use in vertical mount Bulletin 800F enclosures. BP 10 per package (3) (3) Not available with 90° offset orientation. Standard Knob Cat. No. 800FP-SM22 Knob Lever Cat. No. 800FP-HM22 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 13 Bulletin 800F 22.5 mm Push Buttons 2-position, Illuminated Switching Angle IMPORTANT Crevices can exist on product that make it unsuitable for certain applications. Consult your local Rockwell Automation sales office or Allen-Bradley distributor. Table 10 - Target Table and Operator Position (1) (1) Target table for spring return from left is reversed from what is shown in the table. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open N.O. O X N.C. X O Color Operator Type Package Quantity Standard Knob Plastic Metal Cat. No. Cat. No. Green Maintained (60° switching angle) 1 800FP-LSM23 800FM-LSM23 Red 800FP-LSM24 800FM-LSM24 Yellow 800FP-LSM25 800FM-LSM25 800F P – LS M2 3 a b c d e a b c Operator Construction Operator Type Operator Function Code Description (1) (1) LED module is required for illumination. Code Description Code Type P Round plastic operator (IP66, Type 4/4X/13) LS Standard knob M2 Maintained (60° switching angle) LH Knob lever (3) (3) Only available in clear. M Round metal operator (IP66, Type 4/13) L2 Spring return from left (60° switching angle) R2 Spring return from right (60° switching angle) d e Knob/Insert Color Orientation Code Knob Color Insert Color Code Description 0 Amber (2) (2) Use of a white LED is recommended. White Blank Standard 3 Green White N 90° offset (4) (4) For use in vertical mount enclosures. 4 Red White 5 Yellow (2) Black 6 Blue (2) White 7 Clear Black Standard Knob Cat. No. 800FP-LSM26 14 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons 3-position, Non-illuminated Switching Angle Table 11 - Target Table and Operator Position (60° Switching Angle) Contact Type (1) (1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Position on Mounting Latch N.O. Left X O O Right O O X Center X O X Center CL (2) (2) The center contact block can have the same target output as the left or right contact block, by specifying center left (CL) or center right (CR) option. Note: X = Closed / O = Open X O O Center CR (2) O O X N.C. Left O X X Right X X O Center O X O Center CL (2) O X X Center CR (2) X X O Color Operator Type Package Quantity Standard Knob Knob Lever Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Black with White Insert Maintained 1 800FP-SM32 800FM-SM32 800FP-HM32 800FM-HM32 Spring return from left and right 800FP-SB32 800FM-SB32 800FP-HB32 800FM-HB32 800F P – S M3 2 a b c d e f a b c Operator Construction Operator Type Operator Function Code Description Code Description Code Type P Round plastic operator (IP66, Type 4/4X/13) S Standard knob M3 Maintained H Knob lever (1) (1) 30 mm hole spacing does not work if knob lever is used. See page 47 for recommended operator panel spacing. L3 Spring return from left M Round metal operator (IP66, Type 4/13) R3 Spring return from right B3 Spring return from left and right d e f Knob/Insert Color Orientation Operation Code Knob Color Insert Color Code Description Code Description 2 Black White Blank Standard Blank Standard N 90° offset (2) (2) For use in vertical mount Bulletin 800F enclosures. CL Center left (3) (3) The center contact block can have the same target output as the left or right contact block, by specifying center left (CL) or center right (CR) option. CR Center right (3) Standard Knob Cat. No. 800FP-SM32 Knob Lever Cat. No. 800FM-HM32 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 15 Bulletin 800F 22.5 mm Push Buttons 3-position, Illuminated Switching Angle IMPORTANT Crevices can exist on product that make it unsuitable for certain applications. Consult your local Rockwell Automation sales office or Allen-Bradley distributor. Table 12 - Target Table and Operator Position (60° Switching Angle) Contact Type (1) (1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Position on Mounting Latch N.O. Left X O O Right O O X N.C. Left O X X Right X X O Operator Type Package Quantity Green Red Yellow Plastic Metal Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Maintained 1 800FP-LSM33 800FM-LSM33 800FP-LSM34 800FM-LSM34 800FP-LSM35 800FM-LSM35 Spring return from right 800FP-LSR33 800FM-LSR33 800FP-LSR34 800FM-LSR34 800FP-LSR35 800FM-LSR35 Spring return from left 800FP-LSL33 800FM-LSL33 800FP-LSL34 800FM-LSL34 800FP-LSL35 800FM-LSL35 Spring return from left and right 800FP-LSB33 800FM-LSB33 800FP-LSB34 800FM-LSB34 800FP-LSB35 800FM-LSB35 800F P – LS M3 3 a b c d e a b c Operator Construction Operator Type Operator Function Code Description (1) (1) LED module is required for illumination, cannot use incandescent module. Code Description Code Type P Round plastic operator (IP66, Type 4/4X/13) LS Standard knob M3 Maintained LH Knob lever (3) (3) Only available in clear. L3 Spring return from left M Round metal operator (IP66, Type 4/13) R3 Spring return from right B3 Spring return from left and right d e Knob/Insert Color Orientation Code Knob Color Insert Color Code Description 0 Amber (2) (2) Use of a white LED is recommended. White Blank Standard 3 Green White N 90° offset (4) (4) For use in vertical mount Bulletin 800F enclosures. 4 Red White 5 Yellow (2) Black 6 Blue (2) White 7 Clear Black Standard Knob Cat. No. 800FP-LSM37 16 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons 4-position, Non-illuminated Approximate Dimensions — Selector Switch Operators Table 13 - Target Table and Operator Position (45° Switching Angle) (1) (1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 4-position selector switch. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Position on Mounting Latch N.O. Left O O X O Right X O O O Center X O X O Center CL O O X O Center CR X O O O N.C.E.B. Left O O O X Right O X O O Center CL O O O X Center CR O X O O N.C.L.B. Left X X O X Right O X X X Center O X O X Center CL X X O X Center CR O X X X Color Pkg. Quantity Standard Knob — Maintained Plastic Metal Cat. No. Cat. No. Black with White Insert 1 800FP-SM42 800FM-SM42 Standard Knob Cat. No. 800FP-SM42 800F P – S M4 2 a b c d e f a b c Operator Construction Operator Type Operator Function Code Description Code Description Code Type P Round plastic operator (IP66, Type 4/4X/13) S Standard knob M4 Maintained (45° switching angle) H Knob lever M Round metal operator (IP66, Type 4/13) d e f Knob/Insert Color Orientation Operation Code Knob Color Insert Color Code Description Code Description 2 Black White Blank Standard Blank Standard N 90° offset (1) (1) For use in vertical mount enclosures. CL Center left (2) (2) The center contact block can have the same target output as the left or right contact block, by specifying center left (CL) or center right (CR) option. CR Center right (2) Illuminated and Non-illuminated Knob Selector Switch Operators Non-illuminated Knob Lever Selector Switch Operators 29.8 (1.17) 27.9 (1.1) 38.8 (1.53) 28 (1.1) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 17 Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switches 2-position, Non-illuminated Switching Angle Table 14 - Target Table and Operator Position (1) (1) Target table for spring return from left is reversed from what is shown in the table. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open N.O. O X N.C. X O Key Removal Position Operator Type Package Quantity Standard Knob Plastic Metal Cat. No. Cat. No. Left 1 800FP-KM21 800FM-KM21 Both 800FP-KM23 800FM-KM23 800F M – KM2 1 a b c d a b c Operator Construction Operator Type Key Removal Position (4) (4) Key removal in maintained positions only. Code Description Code Type Code Position P Round plastic operator (IP66, Type 4/13) KM2 Maintained (60° switching angle) 1 Left M Round metal operator (IP66, Type 4/13) KL2 Spring return from left (60° switching angle) 2 Right KR2 Spring return from right (60° switching angle) 3 Both d Ronis Key Lock (1) (2) (3) (1) Keyed operators are IP66, Type 4/13. (2) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information. (3) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Code Key No. Code Key No. Blank 3825 (Standard) 27R 4001 R 455 28R 4002 01R 3801 29R 4003 02R 3802 30R 4004 03R 3803 31R 4005 04R 3804 32R 4006 05R 3805 33R 4007 06R 3806 Key Selector Switch Cat. No. 800FP-KM21R Master Key System Key Code No Master Key 18 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons 3-position, Non-illuminated Switching Angle Table 15 - Target Table and Operator Position (60° Switching Angle) Contact Type (1) (1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Position on Mounting Latch N.O. Left X O O Right O O X Center X O X N.C. Left O X X Right X X O Center O X O Key Removal Position Operator Type Package Quantity Standard Knob Plastic Metal Cat. No. Cat. No. Left 1 800FP-KM31 800FM-KM31 All 800FP-KM33 800FM-KM33 Center 800FP-KM34 800FM-KM34 Center 800FP-KB34 800FM-KB34 800F M – KM3 3 a b c d a b c Operator Construction Operator Type Key Removal Position (1) (1) Key removal in maintained positions only. Code Description Code Description Code Type P Round plastic operator (IP66, Type 4/13) KM3 Maintained 1 Left M Round metal operator (IP66, Type 4/13) KR3 Spring return from right 3 All KL3 Spring return from left 4 Center d KB3 Spring return from both 5 Left/center See page 17 for optional key codes (2) (3) (4) (2) Keyed operators are IP66, Type 4/13. (3) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information. (4) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor 7 Center/right (5) (5) Key removal position only valid with operator types 800F_-KM3 and 800F_-KL3. Key-operated Selector Switch Cat. No. 800FP-KM31R Key-operated Selector Switch Cat. No. 800FM-KM31R Master Key System Rockwell Automation Publication 800-TD008F-EN-P - August 2025 19 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Key-operated Selector Switches Key Selector Switch Operators 29.6 (1.17) 21.2 (0.83) 47.1 (1.85) 20 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Push-pull Operators 2-position, Non-illuminated — Twist-to-release/Push-pull (Trigger Action) IMPORTANT • All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks. • E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can be found in publication SAFETY-SR001. Color Package Quantity 40 mm Mushroom (Trigger Action) Twist-to-release 40 mm Mushroom (Trigger Action) Push-Pull Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Red 1 800FP-MT44 800FM-MT44 800FP-MP44 800FM-MP44 800F P – MT4 4 a b c d a b c d (4) (5) (6) (4) For EMO guards, consult your local Rockwell Automation sales office or Allen-Bradley distributor. (5) Only available on 40 mm color cap. (6) Only available on red, 40 mm push, twist-to-release operator type (MT44). Operator Construction Operator Type Color Cap Engraving Code Description Push, Twist-to-release (1) (1) Only available with red color cap. Code Color Code Description P Round plastic operator (IP69K; IP66, Type 4/4X/13) Code Type 2 Black Blank No engraving on cap MT3 30 mm color cap 3 Green LE EMO laser engraved M Round metal operator (IP66, Type 4/13) MT4 40 mm color cap 4 Red E EMO printed MT6 60 mm color cap 5 Yellow Push-pull (2) (2) Limit of four contact blocks max. for these devices. 6 Blue MP4 40 mm color cap Half-dome Push-pull (2) MP9 90 mm color cap (3) (3) Half-dome operators only available with black, red, and yellow color caps 40 mm Trigger Action Twist to-Release Mushroom Cat. No. 800FP-MT44 40 mm Trigger Action Push Pull Mushroom Cat. No. 800FP-MP44 90 mm Half-dome Cat. No. 800FP-MP94 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 21 Bulletin 800F 22.5 mm Push Buttons 2-position, Illuminated — Twist-to-release / Push-pull (Trigger Action) IMPORTANT • LED module is required for illumination. • All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks. • E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can be found in publication SAFETY-SR001. Color Package Quantity 40 mm Mushroom (Trigger Action) Twist-to-release 40 mm Mushroom (Trigger Action) Push-Pull Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Red 1 800FP-LMT44 800FM-LMT44 800FP-LMP44 800FM-LMP44 800F P – LMP4 3 a b c a b c Operator Construction Operator Type Lens Cap Color Code Description Push, Twist-to-release (1) (2) (1) Only available with red color cap. (2) 60 mm version has black arrows; 30 and 40 mm versions have white arrows. Code Color P Round plastic operator (IP69K; IP66, Type 4/4X/13) Code Type 3 Green LMT4 40 mm color cap 4 Red M Round metal operator (IP66, Type 4/13) LMT6 60 mm color cap 5 Yellow (5) (5) Use of a white LED is recommended. Push-pull (3) (3) Limit of four contact blocks max. for these devices. 6 Blue (5) (6) (6) Only available with 40 mm Push-Pull color cap (Code LMP4 from Table b). LMP3 30 mm color cap LMP4 40 mm color cap LMP6 60 mm color cap Half-dome Push-pull (3) LMP9 90 mm color cap (4) (4) Half-dome operators only available with red and yellow lens cap colors. 40 mm Illuminated Twist-to-release Cat. No. 800FP-LMT44 40 mm Mushroom Push-pull Cat. No. 800FM-LMP44 90 mm Half-dome Cat. No. 800FP-LMP94 22 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons 2-position, Non-illuminated — Mushroom, Key Release (Trigger Action) IMPORTANT • All emergency stop operators are EN ISO 13850 compliant with standard N.C., N.C.L.B., or self-monitoring contact blocks. • E-stop operators, latch, and contact block combinations have been third-party tested for B10d values. B10d values can be found in publication SAFETY-SR001. Color Package Quantity 2-Position (Trigger Action) 40 mm Mushroom Key Release Plastic Metal Cat. No. Cat. No. Red 1 800FP-MK44 800FM-MK44 800F P – MK4 4 a b c d a b c d Operator Construction Operator Type Lens Cap Color Ronis Key Lock (1) (2) (3) (1) Keyed operators are IP66, Type 4/13. (2) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen- Bradley distributor for interoperability information. (3) For replacement Ronis keys, consult your local Rockwell Automation sales office or Allen-Bradley distributor. Code Description Key Release Mushroom Code Color Code Key No. P Round plastic operator (IP66, Type 4/13) Code Type 4 Red Blank 3825 (Standard) MK4 40 mm R 455 M Round metal operator (IP66, Type 4/13) 01R 3801 02R 3802 03R 3803 04R 3804 05R 3805 06R 3806 27R 4001 28R 4002 29R 4003 30R 4004 31R 4005 32R 4006 33R 4007 40 mm Key Release Mushroom Cat. No. 800FP-MK44 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 23 Bulletin 800F 22.5 mm Push Buttons 3-position, Illuminated and Non-illuminated — Mushroom IMPORTANT Sold as standalone operator only. Not available as a composite catalog number. Table 16 - Target Table and Operator Position (1) (1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 3-position push-pull operators. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Out Center In N.O. O O X N.C.E.B X O O N.C.L.B X X O Operator Function Operator Type Color Package Quantity Cat. No. Momentary Out, Maintained Center, Momentary In Non-illuminated Black (1) (1) Available in non-illuminated only. 1 800FM-MM42E3 Green 800FM-MM43E3 Red (2) (2) Replacement caps are available for this device. Order Cat. No. 800F-AMP4. 800FM-MM44E3 Illuminated Amber (3) (3) Available in illuminated only. 800FM-LMM40E3 Green 800FM-LMM43E3 Red 800FM-LMM44E3 Blue (3) 800FM-LMM46E3 Clear (3) 800FM-LMM47E3 Momentary Out, Maintained Center, Maintained In Non-illuminated Black (1) 1 800FM-MP42E3 Green 800FM-MP43E3 Red (2) 800FM-MP44E3 Illuminated Amber (3) 800FM-LMP40E3 Green 800FM-LMP43E3 Red 800FM-LMP44E3 Blue (3) 800FM-LMP46E3 Clear (3) 800FM-LMP47E3 800F M – L MM 4 4 E3 a b c d e f a b c d e f Operator Construction Operator Type Operator Function Cap Size Cap Color Positions Code Description Code Description Code Description Code Description Code Description Code Description M Round metal operator (IP66, Type 4/13) Blank Non-illuminated MM Momentary out, Maintained center, Momentary in 4 40 mm plastic 0 Amber (2) (3) (2) Available in illuminated only. (3) Use of white LED is recommended. E3 3-position L Illuminated (1) (1) LED module is required for illumination. Cannot use incandescent module. 2 Black (4) (4) Available in non-illuminated only. 3 Green MP Momentary out, Maintained center, Maintained in 4 Red 6 Blue (2) (3) 7 Clear (2) (3) Illuminated 3-position Push-pull Cat. No. 800FM-LMP44E3 24 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Push-pull Operators Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. 90 mm Half Dome 90 mm Mushroom Illuminated and Non-illuminated Momentary Mushroom Operators (40 mm and 60 mm) Operator A 40 mm 39.8 (1.57) 60 mm 59.8 (2.35) Illuminated and Non-illuminated Twist-to-release Operators (30 mm, 40 mm, and 60 mm) Illuminated and Non-illuminated Push-pull Mushroom Operators (30 mm, 40 mm, and 60 mm) Operator A 30 mm 30 (1.18) 40 mm 40 (1.57) 60 mm 60 (2.36) Mushroom Key Release Operator (40 mm) 30.1 (1.19) 89.9 (3.54) 26 (1.02) 89.8 (3.54) 22 (0.87) 45 (1.77) A 45 (1.77) A 45 (1.77) 40 (1.57) 72 (2.83) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 25 Bulletin 800F 22.5 mm Push Buttons Momentary Mushroom Push Buttons Non-illuminated Color Package Quantity 40 mm Mushroom 60 mm Mushroom 90 mm Mushroom Plastic Metal Plastic Metal Plastic Metal Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Black 1 800FP-MM42 800FM-MM42 800FP-MM62 800FM-MM62 800FP-MM92 800FM-MM92 Green 800FP-MM43 800FM-MM43 800FP-MM63 800FM-MM63 — — Red 800FP-MM44 800FM-MM44 800FP-MM64 800FM-MM64 800FP-MM94 800FM-MM94 Yellow 800FP-MM45 800FM-MM45 800FP-MM65 800FM-MM65 800FP-MM95 800FM-MM95 Blue 800FP-MM46 800FM-MM46 800FP-MM66 800FM-MM66 — — 800F P – MM4 3 a b c a b c Operator Construction Size and Operator Type Color Cap Code Description Code Type Code Color P Round plastic operator (IP69K; IP65, Type 4/4X/13) MM4 40 mm momentary 2 Black MM6 60 mm momentary 3 Green M Round metal operator (IP65, Type 4/13) MM9 90 mm momentary (1) (1) Only available with black, red, and yellow cap colors. 4 Red 5 Yellow 6 Blue 40 mm Mushroom Cat. No. 800FM-MM42 60 mm Mushroom Cat. No. 800FP-MM63 90 mm Mushroom Cat. No. 800FP-MM94 26 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Illuminated Approximate Dimensions — Momentary Mushroom Push Buttons Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Color Package Quantity 40 mm Mushroom Plastic Metal Cat. No. Cat. No. Green 1 800FP-LMM43 800FM-LMM43 Red 800FP-LMM44 800FM-LMM44 Yellow 800FP-LMM45 800FM-LMM45 Blue 800FP-LMM46 800FM-LMM46 Clear 800FP-LMM47 800FM-LMM47 800F P – LMM4 3 a b c a b c Operator Construction Size and Operator Type Color Cap Code Description Code Type Code Color P Round plastic operator (IP69K; IP65, Type 4/4X/13) LMM4 40 mm momentary 3 Green 4 Red M Round metal operator (IP65, Type 4/13) 5 Yellow (1) (1) When using LED for illumination, a white LED is recommended. 6 Blue (1) 7 Clear (1) Illuminated and Non-illuminated Momentary Mushroom Operators (40 mm and 60 mm) 90 mm Mushroom Operator A 40 mm 39.8 (1.57) 60 mm 59.8 (2.35) 40 mm Mushroom Cat. No. 800FP-LMM43 22 (0.87) 26 (1.02) 89.8 (3.54) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 27 Bulletin 800F 22.5 mm Push Buttons Momentary Multi-operator 2-function, Non-illuminated Position A Position C Package Quantity Plastic Color Type Text Color Type Text Cat. No. Red Extended Blank Green Flush Blank 1 800FP-U2E4F3 O I 800FP-U2EFFE STOP START 800FP-U2EBFA 800F P – U2 E 4 F 3 (with button caps) a b c d e f 800F P – U2 X (with button caps) a b c a b c Operator Construction Operator Type Operator Type — Position A (2) (2) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator. Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X) U2 Two-function F Flush E Extended M Round metal operator (IP66, Type 4) X No caps (all positions) (3) (3) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor. d e f Operator Color Cap/Text — Position A (1) (1) Valid color cap/legend text codes shown in Table 17. Operator Type — Position C (2) Operator Color Cap/Text — Position C (1) Code Description Code Description Code Description 1 White F Flush 1 White 2 Black E Extended 2 Black 3 Green 3 Green 4 Red 4 Red 5 Yellow 5 Yellow 6 Blue 6 Blue A Green with “Start” text A Green with “Start” text B Red with “Stop” text B Red with “Stop” text C White with “Start” text C White with “Start” text D Black with “Stop” text D Black with “Stop” text E Green with “I” text E Green with “I” text F Red with “O” text F Red with “O” text G White with “I” text G White with “I” text H Black with “O” text H Black with “O” text Table 17 - Cap/Legend Text Color Text Flush Caps Extended Caps White START, I — Black — STOP, O Green START, I — Red — STOP, O 2-function Momentary Multi-operator Non-illuminated Cat. No. 800FP-U2E4F3 (2) Position C Position A 28 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons 2-function, Illuminated Position A Position B Position C Pkg. Qty. Plastic Color Type Text Type Color Type Text Cat. No. Red Extended Blank White Pilot Light Green Flush Blank 1 800FP-LU2E4F3 O I 800FP-LU2EFFE STOP START 800FP-LU2EBFA 800F P – LU2 E 4 F 3 (with button caps) a b c d e f 800F P – LU2 X (with button caps) a b c a b c Operator Construction Operator Type (2) (2) LED module is required for illumination, cannot use incandescent module. Operator Type — Position A (3) (3) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator. Position 3 of the latch (center position) is reserved for the power module. Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X) LU2 Two-function Illuminated F Flush E Extended M Round metal operator (IP66, Type 4) X No caps (all positions) (4) (4) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor. d e f Operator Color Cap/Text — Position A (1) (1) Valid color cap/legend text codes shown in Table 18. Operator Type — Position C (3) Operator Color Cap/Text — Position C (1) Code Description Code Description Code Description 1 White F Flush 1 White 2 Black E Extended 2 Black 3 Green 3 Green 4 Red 4 Red 5 Yellow 5 Yellow 6 Blue 6 Blue A Green with “Start” text A Green with “Start” text B Red with “Stop” text B Red with “Stop” text C White with “Start” text C White with “Start” text D Black with “Stop” text D Black with “Stop” text E Green with “I” text E Green with “I” text F Red with “O” text F Red with “O” text G White with “I” text G White with “I” text H Black with “O” text H Black with “O” text Table 18 - Cap/Legend Text Color Text Flush Caps Extended Caps White START, I — Black — STOP, O Green START, I — Red — STOP, O 2-function Momentary Multi-operator Illuminated Cat. No. 800FP-LU2E2E1 (3) Position C Position A Rockwell Automation Publication 800-TD008F-EN-P - August 2025 29 Bulletin 800F 22.5 mm Push Buttons 3-function, Non-illuminated Position A Position B Position C Pkg. Qty. Plastic Color Type Text Color Type Text Color Type Text Cat. No. Green Flush Blank Red Extended Blank Green Flush Blank 1 800FP-U3F3F34 800F P – U3 E 4 F 3 4 (with button caps) a b c d e f g 800F P – U3 X (with button caps) a b c a b c Operator Construction Operator Type Operator Type — Position A (2) (2) Position 1 of the latch (left position when viewed from the back) corresponds to position A of the operator. Position 2 of the latch (right position when viewed from the back) corresponds to position C of the operator. Position 3 of the latch (center position) corresponds to position B of the operator. Code Description Code Description Code Description P Round plastic operator (IP69K; IP66, Type 4/4X) U3 Three-function F Flush M Round metal operator (IP66, Type 4) E Extended X No caps (all positions) (3) (4) (3) For custom-engraved caps, consult your local Rockwell Automation sales office or Allen-Bradley distributor. (4) For “no caps” option, (position B) center cap available as red, no text only. d Operator Color Cap/Text — Position A (1) (1) Valid color cap/legend text codes shown in Table 19. e f Code Description Operator Type — Position C (2) Operator Color Cap/Text — Position C (1) 1 White Code Description Code Description 2 Black F Flush 1 White 3 Green E Extended 2 Black 4 Red 3 Green 5 Yellow 4 Red 6 Blue 5 Yellow A Green with “Start” text 6 Blue B Red with “Stop” text A Green with “Start” text C White with “Start” text B Red with “Stop” text D Black with “Stop” text C White with “Start” text E Green with “I” text D Black with “Stop” text F Red with “O” text E Green with “I” text G White with “I” text F Red with “O” text H Black with “O” text G White with “I” text H Black with “O” text g Operator Color Cap/Text — Position B (2) (4) Code Description 4 Red B Red with “Stop” text F Red with “O” text Table 19 - Cap/Legend Text Color Text Flush Caps Extended Caps White START, I — 3-function Momentary Multi-operator Non-illuminated Cat. No. 800FP-U3E4F34 Position C Position B P i i A Position A 30 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Momentary Multi-operator Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Black — STOP, O Green START, I — Red — STOP, O Illuminated and Non-illuminated 2-position Multi-function Operators Non-illuminated 3-position Multi-function Operators Table 19 - Cap/Legend Text Color Text Flush Caps Extended Caps 16.8 (0.66) 49.6 (1.95) 12.8 (0.5) 17.5 (0.69) 49.6 (1.95) 12.8 (0.5) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 31 Bulletin 800F 22.5 mm Push Buttons Reset Operators Mechanical and/or Electrical Reset Threaded Reset Rod Reset Operators Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Button Color Legend Text Pkg. Quantity Flush — Round Plastic Metal Cat. No. Cat. No. Blue R 1 800FP-R611 800FM-R611 No legend 800FP-R6 800FM-R6 800F M – R 6 11 a b c d a b c d Operator Construction Operator Type Color Cap Legend Text Code Description Code Type Code Color Code Text P Round plastic operator (IP66, Type 4/4X/13) R Reset (1) (2) (1) Accepts latch and up to four single-circuit contact blocks or two dual-circuit contact blocks; no contacts are allowed in center position. (2) 11 mm (0.4 in.) reset stroke length. 1 White Blank No text 2 Black 11 R M Round metal operator (IP66, Type 4/13) 6 Blue Rod Length [mm (in.)] (1) (1) If contact blocks are used, they must have a minimum rod length of 55 mm for one level of contact blocks and 85 mm for two levels of contact blocks. Rod Length Adjustability [mm (in.)] Pkg. Quantity Threaded Reset Rod 10 mm Pusher 35 mm Pusher Cat. No. Cat. No. 40 (1.6) 34…52 (1.3…2.1) 1 800F-ATR01 800F-ATR01L 55 (2.2) 50…67 (2.0…2.6) 800F-ATR02 800F-ATR02L 85 (3.4) 80…98 800F-ATR04 800F-ATR04L 115 (4.5) 110…128 800F-ATR06 800F-ATR06L 145 (5.7) 141…159 800F-ATR08 800F-ATR08L 315 (12.4) 34…326 800F-ATR19 (2) (2) Rod is threaded along its entire length for ease of cutting to desired length. 800F-ATR19L (2) Reset Operators with Reset Rod Reset Operator Cat. No. 800FP-R611 Threaded Reset Rod with 35 mm Pusher Cat. No. 800F-ATR19L 29.6 (1.17) 4.5 (0.18) 50…340 (1.97…13.39) 32 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Single-turn Potentiometer Assembly Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Resistive Element (1) (2) (3) (1) Rated 300V AC/DC, 2 W max. (2) A latch is not needed. (3) Additional hole spacing required for potentiometers. See Instruction Sheet on page 47 for panel hole spacing requirements. Series B Cat. No. Series A Cat. No. (4) (4) Not stocked. Longer leadtime. None (Operator Only) (5) (5) The catalog number 800FP-POT is a complete operator assembly supplied without the resistive element, used with potentiometers having a shaft diameter of 6.0 mm (0.23 in.) and a shaft length of 50.0 mm (1.97 in.), or a shaft diameter of 6.4 mm (0.25 in.) and a shaft length of 22.5 mm (0.88 in.). This operator is used with Type J potentiometers only. 800FP-POT 800FP-POTA 150 Ω 800FP-POT1 800FP-POT1A 500 Ω 800FP-POT2 800FP-POT2A 1000 Ω 800FP-POT3 800FP-POT3A 2500 Ω 800FP-POT4 800FP-POT4A 5000 Ω 800FP-POT5 800FP-POT5A 10,000 Ω 800FP-POT6 800FP-POT6A 29.6 (1.17) 22.5 (0.86) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 33 Bulletin 800F 22.5 mm Push Buttons Key-operated Selector Switch — SensEject SensEject™ — patented spring-loaded key ejection system Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Operator Construction Operator Type Key Eject Position Key Option (1) (1) Not intended for high security applications. Interoperability is possible with certain key/cylinder lock combinations. Consult your local Rockwell Automation sales office or Allen-Bradley distributor for interoperability information. Spare Key Cat. No. Contact Blocks Cat. No. (2) (2) Includes latch and spacer block. Round metal operator — SensEject is IP6X (dust-tight) UL Type 1 2-position maintained Left with key eject Ronis key 800F-AKE006 None 800FM-KEM21R 1 N.O., 1 N.C. 800FM-KEM21RMX11 3-position spring return from both Center with key eject Ronis key 800F-AKE001 None 800FM-KEB34R 2 N.O., 3 N.C. 800FM-KEB34RMX23 2-position Switching Angle 3-position Switching Angle 29.6 (1.17) 21.2 (0.83) 47.1 (1.85) 34 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Selector Push Button Operators Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Table 20 - Target Table and Operator Position (2-position) Contact Type (1) Position on Mounting Latch Selector Left Free Selector Left Depressed Selector Right Free Selector Right Depressed N.O. Left O X O O Right O O O X Center O X O X N.C. Left X O X X Right X X X O Center X O X O Table 21 - Target Table and Operator Position (3-position) Contact Type (1) (1) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Position on Mounting Latch Selector Left Free Selector Left Depressed Selector Center Free Selector Center Depressed Selector Right Free Selector Right Depressed N.O. Left O X O X O O Right O O O X O X Center O X O X O X N.C. Left X O X O X X Right X X X O X O Center X O X O X O 800F P – SJ 2 2 a b c d a b c d Operator Construction Operator Type Operator Function Color Cap (1) (1) Buttons cannot be engraved. Code Description Code Description Code Description Code Description P Round plastic operator (IP66, Type 4/4X/13) SJ Selector jog 2 2-position 2 Black 3 3-position 3 Green M Round metal operator (IP66, Type 4/13) Selector Jog Operator Cat. No. 800FM-SJ23 21.8 (0.86) 30 (1.18) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 35 Bulletin 800F 22.5 mm Push Buttons Toggle Switch Operators Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Table 22 - Target Table and Operator Position (2-position) Contact Type (2) Position on Mounting Latch Toggle Left Center Toggle Right N.O. Left O O X Right X O O Center X O X N.C. Left X X O Right O X X Center O X O Table 23 - Target Table and Operator Position (4-position) (1) (1) Must use N.O., N.C.E.B., or N.C.L.B. contact blocks only. Cannot use N.C. or N.O.E.M. contact blocks with 4-position toggle switch. Contact Type (2) (2) Contact selection is limited to the following options, consult your local Rockwell Automation sales office or Allen-Bradley distributor for other options. Note: X = Closed / O = Open Position on Mounting Latch Toggle Up Toggle Left Center Toggle Right Toggle Down N.O. Left X O O O O Right O X O O O Center X X O O O N.C.L.B. Left O X X X X Right X O X X X Center O O X X X N.C.E.B. Left O O O O X Right O O O X O 800F M – J M2 a b c a b c Operator Construction Operator Type Operator Function Code Description Code Description Code Description M Round metal operator (IP66, Type 4/13) J Toggle switch (1) (2) (1) Use legend plates 800F-34_ and 800F-35_. (2) Silicone boot comes standard with toggle switch, consult your local Rockwell Automation sales office or Allen-Bradley distributor for replacement boots. M2 2-position, maintained R2 2-position, momentary M4 4-position, maintained R4 4-position, momentary Toggle Switch Operator Cat. No. 800FM-JM2 73 (2.87) 32 (1.26) 36 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Back-of-panel Components Contact Blocks with Latch — Composite Power Modules with Latch — Composite 800F – P X 0 1 E a b c d e a b c d Style Contact Block Termination Style (1) (1) Six circuits maximum allowable. N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits Code Description Code Description Code Description Code Description P Plastic latch X Screw termination 0 No contact 0 No contact M Metal latch Q Spring-clamp termination 1 1 N.O. 1 1 N.C. 2 2 N.O. 2 2 N.C. 3 3 N.O. 3 3 N.C. 4 4 N.O. 4 4 N.C. 5 5 N.O. 5 5 N.C. 6 6 N.O. 6 6 N.C. e Specialty Contact Block Code Description Blank Standard blocks V Low-voltage — QuadConnect™ E N.O. early make L N.C. late break B N.C. early break S N.C. self-monitoring 800F – M N 3 G a b c d a b c d Style Power Module Type (1) (2) (1) LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, momentary push buttons, and momentary mushroom operators only. (2) Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module. Voltage Lamp Color (5) (5) For best illumination results, LED color should match lens color. For yellow, blue, or amber operator, select a white LED. Code Description Code Description Code Description Code Description P Plastic latch D Incandescent module, screw termination 0 No bulb (3) (3) Only available for incandescent module. C Incandescent M Metal latch 1 6V AC/DC (3) R Red LED N Integrated LED module, screw termination 2 12V AC/DC (3) G Green LED 3 10…29V AC 10…30V DC W White LED Q Integrated LED module, springclamp termination 4 48V AC/DC (3) 5 120V AC 7 240V AC (4) (4) Only available for integrated LED module. Rockwell Automation Publication 800-TD008F-EN-P - August 2025 37 Bulletin 800F 22.5 mm Push Buttons Power Modules with Contact Blocks and Latch — Composite Other Back-of-panel Components 800F – P N 5 R X 1 0 E a b c d e f g h a b c d Style Power Module Type (1) (2) (1) Four circuits maximum allowable when power module is used. Contact blocks cannot be stacked on power module. (2) LED modules for use with all illuminated operators. Incandescent module for use with pilot lights, push buttons, and momentary mushroom operators only. Voltage Lamp Color (5) (5) For best illuminated results, LED should match lens color. For yellow, blue, or amber operator, select a white LED. Code Description Code Description Code Description Code Description P Plastic latch D Incandescent module, screw termination 0 No bulb (3) (3) Only available for incandescent module. C Incandescent M Metal latch 1 6V AC/DC (3) R Red LED N Integrated LED module, screw termination 2 12V AC/DC (3) G Green LED 3 10…29V AC 10…30V DC W White LED Q Integrated LED module, spring-clamp termination 4 48V AC/DC (3) 5 120V AC 7 240V AC (4) (4) Only available for integrated LED module. e f g h Contact Block Termination Style N.O. (Normally Open) Circuits N.C. (Normally Closed) Circuits Specialty Contact Block Code Description Code Description Code Description Code Description X Screw termination 0 No contact 0 No contact Blank Standard blocks Q Spring-clamp termination 1 1 N.O. 1 1 N.C. V Low-voltage — QuadConnect™ 2 2 N.O. 2 2 N.C. E N.O. early make 3 3 N.O. 3 3 N.C. L N.C. late break 4 4 N.O. 4 4 N.C. B N.C. early break S N.C. self-monitoring Table 24 - Latches Description Pkg. Qty. Cat. No. Metal Mounting Latch Zinc-plated, metal die cast mounting latches. Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 10 800F-ALM Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 100 800F-ALM-BP Plastic Mounting Latch Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 10 800F-ALP Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 100 800F-ALP-BP Cat. No. 800F-ALM Cat. No. 800F-ALP 38 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Table 25 - Contact Blocks Description Contact Type Pkg. Qty. Cat. No. Contact Block Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. N.O. 10 800F-X10 N.C. 800F-X01 N.O. low-voltage — QuadConnect 800F-X10V N.C. low-voltage — QuadConnect 800F-X01V N.O.L.M. 800F-X10N (1) (1) For use with Cat. No. 800FP-CB_ and Cat. No. 800FP-CC_ operators. N.O.E.M. 800F-X10E N.O.E.E.M. 800F-X10M (2) (2) For use with Cat. No. 800FP-CC_ operators. N.C.L.B. 800F-X01L N.C.E.B. 800F-X01B (3) (3) Only for use with 4-position selector switch, 4-position toggle switch, or 3-position push-pull operator. Self-Monitoring 800F-X01S (4) (4) Cannot stack. Dual-circuit of 2 N.O. 800F-X20D (4) Dual-circuit of 2 N.C. 800F-X02D (4) Dual-circuit of 1 N.O.-1 N.C. 800F-X11D (4) N.O. spring-clamp 800F-Q10 N.C. spring-clamp 800F-Q01 Ring lug N.O. 800F-R10 (5) (6) (5) Cannot be used in a composite catalog number. (6) Replacement screws are available (Cat. No. 800F-ARS1 Ring lug N.C. 800F-R01 (5) (6) Note: Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. Latch not included. N.O. 100 800F-X10-BP N.C. 800F-X01-BP Base-mounted Contact Block Base-mounted contact blocks can be used in plastic or metal enclosures. Note: Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. N.O. 10 800F-BX10 N.C. 800F-BX01 Cat. No. 800F-X10 Cat. No. 800F-BX01 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 39 Bulletin 800F 22.5 mm Push Buttons Table 26 - Power Modules Description Voltage Pkg. Qty. Cat. No. Incandescent Module For use with pilot lights, push buttons, and momentary mushroom operators. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. No bulb 10 800F-D0C 6V AC/DC 800F-D1C (1) (1) Lamp included with power module. 12V AC/DC 800F-D2C (1) 24V AC/DC 800F-D3C (1) 48V AC/DC 800F-D4C (1) 120V AC/DC 800F-D5C (1) Integrated LED Module For use with all illuminated devices. For best results, LED should match lens color. For amber, yellow, and blue operators use white LED. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. 24…120V AC/DC 10 800F-NUx (2) (3) (2) To complete the cat. no., replace the x with one of the following letters for the desired color: R = Red, G = Green, W = White. (3) Cannot be used in a composite catalog number. 24V AC/DC 800F-N3x (2) 120V AC 800F-N5x (2) 208…240V AC 800F-N7x (2) 24V AC/DC spring-clamp 800F-Q3x (2) 120V AC spring-clamp 800F-Q5x (2) 208…240V AC spring-clamp 800F-Q7x (2) 24V AC/DC ring lug 800F-R3x (2) (3) (4) (4) Replacement screws are available (Cat. No. 800F-ARS1) Base-mounted Integrated LED Module Base-mounted modules can be used in plastic or metal enclosures. For best illumination results, LED should match lens color. Note: Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Latch not included. 24V AC/DC 10 800F-BN3x (2) 120V AC 800F-BN5x (2) 208…240V AC 800F-BN7x (2) Cat. No. 800F-D3C Cat. No. 800F-N3G Cat. No. 800F-BN3R 40 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Back-of-panel Components Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Incandescent Module with Latch LED Module with Latch Contact Cartridges with Latch Dual-circuit Contact Block or Self monitoring Contact Block (1 Deep, Max) Potentiometer with Resistive Element Customer Supplied Resistive Element Max. Min. a (Dia.) 6.4 (0.252) 5.9 (0.232) 5.7 (0.224) b (Length) 24 (0.945) 32 (1.26) 14 (0.551) 45.7 (1.8) 45.7 (1.8) 45.7 (1.8) 23 (0.91) 33 (1.3) 68.7 (2.7) 46 (1.81) 68.7 (2.7) 33 (1.3) 23.1 (0.91) 46 (1.81) 40 (1.57) b a Rockwell Automation Publication 800-TD008F-EN-P - August 2025 41 Bulletin 800F 22.5 mm Push Buttons Plastic and Metal Enclosures Plastic Enclosure (Latch/Base Mount) • Accepts two-piece snap-in legends • One-hole enclosure accepts 60 mm E-stop legends • UL Listed and CSA Certified Metal Enclosure (Latch/Base Mount) • Feed-through design • Accepts two-piece snap-in legends • Includes base mount adapter Type Pkg. Qty, Enclosures Plastic (IP69K (1) ; IP66, 4/4X) (1) Select enclosures; see Table 2 on page 4. Metal — Die Cast (IP66, 4/13) PG Conduit Knockouts Metric Conduit Knockouts PG Conduit Openings Metric Conduit Openings Cat. No. Cat. No. Cat. No. Cat. No. 1-hole 1 800F-1PP (2) (3) (2) Can only use single deep contact block. (3) Knockouts: PG (PG11/16), Metric (M16/20) 800F-1PM (2) (3) 800F-1MP (4) (4) Openings: PG (PG16), Metric (M20) 800F-1MM (4) 2-hole 800F-2PP (2) (3) 800F-2PM (2) (3) 800F-2MP (4) 800F-2MM (4) 3-hole 800F-3PP (2) (3) 800F-3PM (2) (3) 800F-3MP (4) 800F-3MM (4) 4-hole 800F-4PP (2) (3) 800F-4PM (2) (3) — — 5-hole — — 800F-5MP (5) (5) Openings: PG (PG16), Metric (M32) 800F-5MM (5) 6-hole 800F-6PP (2) (6) (6) Knockouts: PG (PG16), Metric (M25) 800F-6PM (2) (6) — — 1-hole (yellow) 800F-1YP (2) 800F-1YM (2) 800F-1MYP (4) 800F-1MYM (4) 1-hole (yellow) latch only — — 800F-1LYP (4) 800F-1LYM (4) 1-hole (yellow) dual-circuit 800F-1YPD (7) (7) Can stack contact blocks two deep or one dual-circuit contact block. 800F-1YMD (7) — — Cat. No. 800F-3PM Cat. No. 800F-5MM 42 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Assembled Stations 1-Hole Enclosure E-Stop Station Enclosure Material Operator Type Illumination Voltage Contact Configuration PG Knockouts Metric Knockouts Cat. No. Cat. No. 1-hole, Yellow Plastic Red 90 mm momentary Non-illuminated 1 N.C. 800F-1YP1M94 800F-1YM1M94 1 N.O./1 N.C. 800F-1YP2M94 800F-1YM2M94 2 N.C. 800F-1YP3M94 800F-1YM3M94 1-hole, Gray Plastic Black 90 mm momentary 1 N.O./1 N.C. 800F-1PP2M92 800F-1PM2M92 Black Push Button 1 N.O. 800F-1PP1 800F-1PM1 “0-1” 2-Position Selector Switch 1 N.O. 800F-1PP2 800F-1PM2 “OFF-ON” 2-position Selector Switch 1 N.O. / 1 N.C. 800F-1PP3 800F-1PM3 ↔ (Flush Black) 1 N.O. 800F-1PP4 — 2-hole, Gray Plastic Start and Stop Push Buttons 1 N.O./1 N.C. 800F-2PP1 — 3-hole, Gray Plastic ↑ (Flush Black) O (Extended Red) ↓ (Flush Black) 4 N.O./1 N.C. 800F-3PP1 — Table 27 - Yellow Plastic Enclosure Quick Connect Operator Type Illumination Voltage Contact Configuration PG Knockouts Metric Knockouts Cat. No. Cat. No. N/A Twist-to-release 40 mm Non-illuminated 1 N.C. 800F-1YP1 800F-1YM1 1 N.O./1 N.C. 800F-1YP2 800F-1YM2 2 N.C. 800F-1YP3 800F-1YM3 Key Release 40 mm 1 N.C. 800F-1YP4 800F-1YM4 1 N.O. / 1 N.C. 800F-1YP5 800F-1YM5 2 N.C. 800F-1YP6 800F-1YM6 Twist-to-release 60 mm 2 N.C. 800F-1YP7 — 1 N.O. / 2 N.C. 800F-1YP8 — Twist-to-release 40 mm 24V AC/DC 1 N.C. — 800F-1YML1 120V AC — 800F-1YML2 240V AC — 800F-1YML3 Push-pull Red half dome Non-illuminated 1 N.C. 800F-1YP1HD 800F-1YM1HD 1 N.O./1 N.C. 800F-1YP2HD 800F-1YM2HD 2 N.C. 800F-1YP3HD 800F-1YM3HD 24V AC/DC 1 N.C. — 800F-1YML1HD 120V AC — 800F-1YML2HD 240V AC — 800F-1YML3HD Cat. No. 800F-1YP4 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 43 Bulletin 800F 22.5 mm Push Buttons AC Micro 5-pin Twist-to-release 40 mm Non-illuminated 2 N.C. — Low-voltage — 800F-1YMQ53V 6-pin 1 N.O. / 2 N.C. — 800F-1YMQA DC Micro 4-pin Non-illuminated/EMO/ Guard 1 N.C. — 800F-NX1 Non-illuminated 1 N.C. — 800F-1YMQ1 1 N.O. / 1 N.C. — 800F-1YMQ2 2 N.C. — 800F-1YMQ3 Non-illuminated/EMO/ Guard 2 N.C. — 800F-1YMQ3VEG 5-pin Non-illuminated 2 N.C. — 800F-1YMQ3V Mini Receptacle 4-pin Non-illuminated 1 N.C. — 800F-1YMQ41 24V AC/DC 1 N.O. / 1 N.C. — 800F-1YMQ44 6-pin 24V AC/DC 1 N.O./1 N.C. — 800F-1YMQ4 120V AC 1 N.O. / 1 N.C. — 800F-1YMQ5 240V AC 1 N.O. / 1 N.C. — 800F-1YMQ6 Table 28 - Gray Metal Enclosure Quick Connect Operator Type Illumination Voltage Contact Configuration PG Knockouts Metric Knockouts Cat. No. Cat. No. N/A Twist-to-release 40 mm Non-Illuminated 1 N.C. — 800F-1MM1 1 N.O. / 1 N.C. — 800F-1MM2 2 N.C. — 800F-1MM3 Key Release 40 mm Non-Illuminated 1 N.C. — 800F-1MM4 1 N.O. / 1 N.C. — 800F-1MM5 2 N.C. — 800F-1MM6 Table 29 - Yellow Metal Enclosure Quick Connect Operator Type Illumination Voltage Contact Configuration PG Knockouts Metric Knockouts Cat. No. Cat. No. Mini Receptacle (1) (1) See Assembled Station Pin Out Chart on page 64. 6-pin Twist-to-release 40 mm 24V AC/DC 1 N.O./1 N.C. — 800F-1MYMQ4 120V AC 1 N.O./1 N.C. — 800F-1MYMQ5 240V AC 1 N.O./1 N.C. — 800F-1MYMQ6 Table 27 - Yellow Plastic Enclosure Quick Connect Operator Type Illumination Voltage Contact Configuration PG Knockouts Metric Knockouts Cat. No. Cat. No. 44 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Assembled Stations with DeviceNet 2-hole 3-hole 4-hole 800F – a b c d c d e (Hole 1 c+d) (Hole 2 c+d) 800F – a b c d c d c d e (Hole 1 c+d) (Hole 2 c+d) (Hole 3 c+d) 800F – a b c d c d c d c d e (Hole 1 c+d) (Hole 2 c+d) (Hole 3 c+d) (Hole 4 c+d) a c d e Mounting Orientation Operator Types Color/Text External I/O Version (9) (9) This is an 8-in/4-out device. 2-in and 1-out are assigned to each hole position in the enclosure. If a 2-hole enclosure is selected, 4-in and 2-out are assigned internally and up to 4 unassigned I/O points can be assigned to external connectors. This device contains up to two physical external I/O connectors. The “+” symbol in the Description field of table e indicates that two external connectors exist. If an E-stop connector is used, 2 unassigned I/O points can be assigned to the other connector. Code Description Code Description Code Description Code Description V Vertical (1) (1) Selector Switches in a vertical mount enclosure are mounted with a horizontal orientation. A Non-illuminated flush button 1 White Blank No external I/O H Horizontal B Non-illuminated extended button 2 Black A 1 input/1 output (sinking) C Non-illuminated guarded button 3 Green B 1 input/1 output (sourcing) b D Illuminated flush button (3) (3) Cannot be ordered with “No Cap” (Code 9 from Table d - Color/Text). 4 Red C 2 input Enclosure Style/Legends E Illuminated extended button (3) 5 Yellow E 2 output (sourcing) Code Description F Illuminated guarded button (3) 6 Blue F 1 E-stop block (10) (10) External I/O Versions F, L, M, Q, and U receive only one contact block for the external E-stop string. These connectors are rated 3 A. If more than 3 A of current is needed or if there are two E-stop strings, use External I/O Versions G, N, P, R, and W. These versions receive two contact blocks. This configuration allows for 6 A of switching or for two E-stop strings. A 2-hole/legend frames G Non-illuminated 2-position selector switch 7 Clear G 2 E-stop block (10) B 3-hole/legend frames 8 Gray (7) (7) Available in flush only. H 2 input/2 output C 4-hole/legend frames H Non-illuminated 3-position selector switch 9 No cap K 2 input/2 output (sourcing) D 2-hole/no legend frames 0 Amber L 1 input/1 output (sinking) + 1 E-stop block (10) E 3-hole/no legend frames J Pilot light (diffused) A Green with “Start” text F 4-hole/no legend frames K Hole plug (4) (4) Operator Types K, L, M, T, and U from Table c are not available with legend frames. B Red with “Stop” text M 1 input/1 output (sourcing) + 1 E-stop block (10) H 2-hole/E-stop only no legend frames (2) (2) Enclosure Style/Legend option H from Table b can only select one operator from Table c. Valid options are L, M, and T. Also see footnote 5. L Non-illuminated TTR E-stop (4) (5) (5) Operator Types L, M, and T from Table c can be used as emergency stops. To be valid as an E-stop, operators must use color/text code 4 from Table d and it must be placed in the last hole position in the enclosure, where a yellow round E-stop legend plate is provided. An E-stop connector must also be chosen from Table e. Also see footnote 10. C Black with “→” symbol M Non-illuminated push-pull (4) (5) D Black with “←” symbol N 1 input/1 output (sinking) + 2 E-stop block (10) N 2-position key selector switch E Black with “↑” symbol P 3-position key selector switch F Black with “↓” symbol P 1 input/1 output (sourcing) + 2 E-stop block (10) R Non-illuminated 40 mm mushroom G Green with “I” symbol H Red with “O” symbol Q 2 input + 1 E-stop block (10) T E-stop key release (4) (5) L Blue with “R” text R 2 input + 2 E-stop block (10) U Potentiometer (5) (6) (6) A potentiometer is allowed in first hole position only. M Red with yellow metal guard (8) (8) Only available with non-illuminated push-pull operator (Code M from Table c). U 2 output (sourcing) + 1 E-stop block (10) W Illuminated push-pull X Illuminated 2-position maintained selector switch N Yellow with yellow metal guard (8) W 2 output (sourcing) + 2 E-stop block (10) Y Illuminated 3-position maintained selector switch X 2 input + 1 input/1 output (sinking) Z Illuminated 40 mm mushroom 4-hole Assembled Station Cat. No. 800F-VHA3A4J3J4J Hole 4 Hole 3 Hole 2 Hole 1 Hole 1 Hole 2 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 45 Bulletin 800F 22.5 mm Push Buttons Pendant Stations Latch Mounting • Blank legend cap marking • Connector not included. See Miscellaneous on page 48 for ordering information. Assembled Two-Hole Pendant Stations Type Pkg. Quantity Yellow Plastic (IP66, 4/4X/13) Cat. No. (1) (1) Only use with single-deep contact block. 1 hole in face 1 800F-P15 2 holes in face 800F-P25 1 hole in bottom 800F-P35 1 hole in face / 1 hole in bottom 800F-P45 Table 30 - Prewired Pendant Station with Mini Quick Disconnect Connector (1) (1) Connector is a 4-pin mini plug. Push Button and Contact Selection Cat. No. (2) (2) Only use with single-deep contact block. Green flush (no text) in face with 1 N.O. contact; Red pilot light in bottom with 1 N.O. contact; 24V AC/DC 800F-PN2 White flush (with up arrow — ↑) with 1 N.O./1 N.C. contact; Black flush (with down arrow — ↓) with 1 N.O./1 N.C. contact 800F-P251 Black flush (with “Forward” text) with 1 N.O./1 N.C. contact; Black flush (with “Reverse” text) with 1 N.O./1 N.C. contact 800F-P252 Black flush (with “On” text) with 1 N.O. contact; Black flush (with “Off” text) with 1 N.C. contact 800F-P253 Green flush (with “Start” text) with 1 N.O. contact; Red flush (with “Stop” text) with 1 N.C. contact 800F-P254 2 flush black push buttons (no text), each with 1 N.O. contact 800F-P255 Pendant Station Cat. No. 800F-P25 Pendant Station Cat. No. 800F-PN2 46 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Enclosures Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Plastic Enclosures (1) (1) Mounting screw — pan head with diameter ≤ 7 mm (0.28 in.). Pendant Stations Cat. No. Holes A B C D Mounting Holes Note: Cable opening = 21.2 mm (0.83 in.) diameter W L 800F-1P (2) 800F-1Y (2) (2) P = PG conduit holes or M = Metric conduit holes 1 85 (3.35) 89 (3.5) 58 (2.28) — 58 (2.28) 59 (2.32) 800F-1Y(2) D 1 85 (3.35) 89 (3.5) 74 (2.91) — 58 (2.28) 65 (2.56) 800F-2P (2) 2 124 (4.88) 79 (3.11) 58 (2.28) 31 (1.22) 48 (1.89) 102.5 (4.04) 800F-3P (2) 3 155 (6.1) 79 (3.11) 58 (2.28) 31 (1.22) 48 (1.89) 133 (5.24) 800F-4P (2) 4 186 (7.32) 79 (3.11) 58 (2.28) 31 (1.22) 48 (1.89) 164.5 (6.48) 800F-6P(2) 6 248 (9.76) 87 (3.43) 64 (2.52) 31 (1.22) 55 (2.17) 224 (8.82) Metal Enclosures Cat. No. Holes A D Mounting Holes L 800F-1M (1) (1) P = PG conduit holes or M = Metric conduit holes 1 99 (3.9) — 62 (2.44) 800F-2M(1) 2 137 (5.39) 37.5 (1.48) 100 (3.94) 800F-3M (1) 3 174 (6.85) 37.5 (1.48) 137 (5.39) 800F-5M (1) 5 249 (9.8) 37.5 (1.48) 212 (8.35) L W D D 9 (0.35) 149 (5.87) 60 (2.36) 62 (2.44) 81 (3.19) D D Rockwell Automation Publication 800-TD008F-EN-P - August 2025 47 Bulletin 800F 22.5 mm Push Buttons Instruction Sheet 30 A B A B 40 50 48 40 / 60 60 / 90 ø60, ø90 40 / 60 50 / 60 40 50 24.1 +0.4 –0 22.3 +0.4 –0 3.2 +0.2 –0 mm OPTIONAL EN OPTION OPTIONAL OPCIONAL OPZIONALE = 70 50 30 50 PLASTIC PLASTIK PLASTIQUE PLÁSTICO PLÁSTICA METAL METALL MÉTAL METALLO M3,5 A 2 2 2 3 2 1 1 1 1 3 + , E M E R G E N C Y S T O P 4 6 3 1 1,2 Nm 10 lb-in 0,7 - 0,9 Nm 6 - 8 lb-in 1,7 Nm 15 lb-in 4,4 Nm 40 lb-in 1- 4,8 mm 1- 6 mm 1- 2,8 mm 1- 4 mm "Click" 7 mm 0,75 - 1,5 mm2 (#18 - #14 AWG) 8 mm 0,6 mm 3,5 mm 0,75 - 2,5 mm 2 (#18 - #12 AWG) Ø40 Ø60 2 3 4 5 "Click" "Click" "Click" 5 48 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Accessories The following accessories are available for use with Bulletin 800F operators. Miscellaneous Description Type Pkg. Quantity Cat. No. Cat. No. 800F-AHA1 30.5 mm to 22.5 mm Hole Size Adapter, Stainless Steel. This adapter allows a 22.5 mm push button operator to be installed in a panel with existing 30.5 mm mounting holes. Metal 1 800F-AHA1 (1) (1) Comes with anti-rotation washer (800F-ALC1). Cat. No. 888N-M4AF1-1F Quick Disconnect Plug receptacle for pendant stations. 4-pin 888N-M4AF1-1F 5-pin 888N-M5AF1-1F Description Material Pkg. Quantity Cat. No. Cat. No. 800F-ARP Replacement Mounting Rings Plastic 10 (2) (2) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-ARP Metal 800F-ARM Description Pkg. Quantity Cat. No. Cat. No. 800F-AW2 Mounting Ring Wrench This mounting ring wrench is used to tighten plastic or metal mounting rings quickly and securely. 1 800F-AW2 Cat. No. 800F-ALR1 Bulb Removal Tool For quick and easy removal of lamps from incandescent modules. 800F-ALR1 Cat. No. 1492-MS5X9 Snap-In Marker This item can be used for circuit identification on all back-of-panel components. (3) (3) See https://ab.rockwellautomation.com/Terminal-Blocks for ordering information. Cat. No. 800F-ATK2 Stab Terminals Can be used with all single-circuit contact blocks. Minimum spacing requirements apply. See instruction sheet for details. 100 (4) (4) Sold only in multiples of 100. Order (quantity of) 100 to receive one package of 100 pieces. 800F-ATK2 Cat. No. 800F-AGS1 Ground Screws These are self-tapping #6-32 (M3.5) ground screws for metal latches. 10 (2) 800F-AGS1 Cat. No. 800F-AGS2 Ground Screws This accessory is used for grounding on Bulletin 800F plastic enclosures only. 800F-AGS2 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 49 Bulletin 800F 22.5 mm Push Buttons Description Panel Thickness with Legend Plates Pkg. Qty. Cat. No. Cat. No. 800F-ALC1 Locking Washer (Anti-rotation Washer) This item provides an extra anti-rotation feature for rotary operators such as selector switches. 1…4 mm 10 (1) (1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-ALC1 1…5 mm 800F-ALC2 Description Pkg. Qty. Cat. No. Cat. No. 800F-ATW1 Replacement Trim Washer This accessory comes standard with all enclosures. It must be used if using base-mounted contact blocks/power modules without legend plates. 10 (1) 800F-ATW1 Cat. No. 800F-A3BA Replacement Base Mount Adapter This accessory comes standard with all metal enclosures. It is required when using metal enclosures with base-mounted contact blocks or base-mounted power modules. 800F-A3BA Cat. No. 800F-ABZ1 Square Bezel Gives round operator a square appearance. This item is made of plastic. Not for use with toggle switch operators. 800F-ABZ1 Description Material Pkg. Qty. Cat. No. Cat. No. 800F-ABJS Replacement Boot for Toggle Switch Silicone 1 800F-ABJS Nitrile 800F-ABJN Cat. No. 800F-N2 Hole Plug for 22.5 mm holes. Black plastic 800F-N2 Gray plastic 800F-N8 Cat. No. 800F-ACP Selector Switch Tabs Changes functionality of selector switch from normal to CenterLeft or CenterRight. 10 (1) 800F-ACP 50 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Guards Description Type Pkg. Qty. Cat. No. Cat. No. 800F-AMRG Protective Ring for use with illuminated/non-illuminated 2-position maintained and illuminated/non-illuminated 3-position mushroom operators (30 mm and 40 mm only) Shiny metal 1 800F-AMRG Black 800F-AMRGB Yellow metal 800F-AMRGY Cat. No. 800F-A6PR5 Plastic Guard for use with the following operators: • 40 mm E-stop (SEMI Standards Compliant) • 40 mm illuminated/non-illuminated alternate action and momentary operators • 60 mm illuminated/non-illuminated momentary operators • Selector switches (standard knob and key operated) • Potentiometers Yellow, round 800F-A6PR5 Cat. No. 800F-AMEGY Narrow Plastic Guard for use with the following operators: • Bul. 800FD monolithic E-stops (SEMI standards compliant) • Flush/extended/guarded push buttons • Alternate action operators • Selector switches (standard knob and key operated) • Potentiometers Yellow 800F-AMEGY Cat. No. 800F-AMMG 40 mm Protective Guard that is used with illuminated and non- illuminated momentary mushroom operators (40 mm) only. Shiny metal 800F-AMMG Protective Boots Clear silicone Protective Boot used on illuminated and non- illuminated, flush and extended operators. Flush push button 10 (1) (1) Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-AB7 Extended push button 800F-ABE7 3-position multifunction 800F-AUB1 2-position multifunction 800F-AUB2 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 51 Bulletin 800F 22.5 mm Push Buttons Locking Attachments Replacement Keys Description Type Pkg. Qty. Cat. No. Cat. No. 800F-AFL1 Locking Attachments are used to lock push button in the depressed position. • N.C. contacts are open • N.O. contacts may or may not be open • N.C.L.B. contacts may or may not be closed • N.O.E.M contacts are closed Flush momentary, non illuminated 1 800F-AFL1 Cat. No. 800F-AEL1 Extended momentary, non-illuminated 800F-AEL1 Cat. No. 800F-AML1 Momentary mushroom 800F-AML1 Cat. No. 800F-AML2 Maintained mushroom 800F-AML2 Description Lock Position Pkg. Qty. Cat. No. Cat. No. 800F-ASL2L Selector Switch Locking Attachment Locks standard knob selector switch in specified position 2-position selector switches, left lock 1 800F-ASL2L 3-position selector switches, center lock 800F-ASL3C Cat. No. 800F-ASL23A Selector Switch Locking Attachment Ability to put two locks on standard knob selector switch. 2- or 3-position selector switches, all positions 800F-ASL23A Cat. No. 800F-AL01 Locking Cover Used on flush, extended and guarded momentary and alternate action operators, and standard knob selector switch operators. 800F-AL01 Description Pkg. Qty. Key No. (Std) Cat. No. Key No. (Std) Cat. No. Cat. No. 800F-AKR3825 Replacement Ronis Key Standard replacement key is Cat. No. 800F- AKR3825. 1 (1) (1) Standard package quantity is one set with two keys. 3825 800F-AKR3825 3910 (2) 800F-AKR3910 455 800F-AKR455 3920 (2) 800F-AKR3920 3801 800F-AKR3801 4001 800F-AKR4001 3802 800F-AKR3802 4002 800F-AKR4002 3803 800F-AKR3803 4003 800F-AKR4003 3804 800F-AKR3804 4004 800F-AKR4004 3805 800F-AKR3805 4005 800F-AKR4005 3806 800F-AKR3806 4006 800F-AKR4006 3901 (2) (2) Master key. See page 17 for details. 800F-AKR3901 4007 800F-AKR4007 52 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Other Accessories Replacement Lamps for Incandescent Modules Description Volts Pkq. Qty. Cat. No. Cat. No. 800F-XD7 Diode Module For lamp checking circuits. Latch not included. ≤600V AC 10 (1) (1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-XD7 Null Block For wire terminations only. 800F-NX70 Cat. No. 800F-30WN Potentiometer Legend Plate Scale 0…9 (Series A potentiometers only) 10 800F-30WN Cat. No. 800F-30WG Potentiometer Legend Plate Graphical scale (Series A Potentiometers only) 800F-30WG Description Resistance Pkq. Qty. Cat. No. Cat. No. 800F-AC1 Replacement resistive elements for the 800FP potentiometer operator. 150 Ω 1 800F-AC1 500 Ω 800F-AC2 1000 Ω 800F-AC3 2500 Ω 800F-AC4 5000 Ω 800F-AC5 10,000 Ω 800F-AC6 Lamp Type Typical Current Voltage ANSI No. Pkg. Quantity Cat. No. Cat. No. 800F-N130 Full-voltage Incandescent 150 mA 6V AC/DC 755 10 (1) (1) Sold in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-N65 80 mA 12V AC/DC 756 800F-N141 70 mA 24V AC/DC 757 800F-N157 50 mA 48V AC/DC 1835 800F-N48 22 mA 130V AC/DC 949 800F-N130 LED 50 mA 6V AC/DC — 800T-N318x (2) (2) To complete the cat. no., replace the x with one of the following letters for the desired color: A = Amber; B = Blue; G = Green; R = Red; W = White. White LEDs only available in 6V and 130V. 12 mA/17 mA 32V AC/DC — 800T-N363x (2) 9 mA/14 mA 48V AC/DC — 800T-N364x (2) 4.5 mA/6.2 mA 130V AC/DC — 800T-N321x (2) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 53 Bulletin 800F 22.5 mm Push Buttons Caps, Diffusers, Lenses Color caps listed below are for completion of devices that are ordered with color caps omitted. Table 31 - Non-illuminated Color Caps (without Text) Color Pkg. Qty. Momentary Extended Momentary Flush/Guarded Alternate Action Flush Cat. No. Cat. No. Cat. No. Orange 10 (1) (1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-AE0 800F-AF0 800F-AFA0 White 800F-AE1 800F-AF1 800F-AFA1 Black 800F-AE2 800F-AF2 800F-AFA2 Green 800F-AE3 800F-AF3 800F-AFA3 Red 800F-AE4 800F-AF4 800F-AFA4 Yellow 800F-AE5 800F-AF5 800F-AFA5 Blue 800F-AE6 800F-AF6 800F-AFA6 Gray — 800F-AF8 — Table 32 - Non-illuminated Color Caps — Multi-Function Operators (without Text) Color Pkg. Qty. Flush Extended Cat. No. Cat. No. White 10 (1) (1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-AFU1 800F-AEU1 Black 800F-AFU2 800F-AEU2 Green 800F-AFU3 800F-AEU3 Red 800F-AFU4 800F-AEU4 Yellow 800F-AFU5 800F-AEU5 Blue 800F-AFU6 800F-AEU6 Table 33 - Illuminated Color Lens Caps and Pilot Light Lenses (without Text) Color Pkg. Qty. Color Lens Caps — Flush, Alternate Action Color Lens Caps — Extended, Guarded Pilot Light Lenses — Standard Lens Cat. No. (1) (1) Includes diffuser. Cat. No. (1) Cat. No. (1) Amber 10 (2) (2) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-ALF0 800F-ALE0 800F-AP0 Green 800F-ALF3 800F-ALE3 800F-AP3 Red 800F-ALF4 800F-ALE4 800F-AP4 Yellow 800F-ALF5 800F-ALE5 800F-AP5 Blue 800F-ALF6 800F-ALE6 800F-AP6 Clear 800F-ALF7 800F-ALE7 800F-AP7 Table 34 - Operator Diffusers (without Text) Description Pkq. Qty. Cat. No. Illuminated push buttons — flush 10 (1) (1) Sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. 800F-AD2 Pilot lights 800F-AD3 Illuminated push buttons — extended, guarded 800F-AD4 54 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Approximate Dimensions — Accessories Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes. Locking Cover Maintained Mushroom Locking Attachment Momentary Mushroom Locking Attachment Extended Non-illuminated Locking Attachment Flush Non-illuminated Locking Attachment Selector Switch Locking Cover (Same for All Lock Positions) Narrow Guard Protective Ring Plastic Guard 33 (1.3) 41 (1.61) 57 (2.24) 54.2 (2.13) 52.4 (2.06) 42.7 (1.68) 54.2 (2.13) 41.6 (1.64) 20.2 (0.8) 54.2 (2.13) 43 (1.69) 22.4 (0.88) 54.2 (2.13) 52.6 (2.07) 19.5 (0.77) 33.4 (1.32) 38 (1.5) 5 (0.2) 69.4 (2.73) 64 (2.52) 34 (1.34) 3.3 (0.13) 40 (1.57) 46.2 (1.82) 42.2 (1.66) 88 (3.46) 44.4 (1.75) 3.3 (0.13) 24.3 (0.96) Ø22.5 (0.89) Rockwell Automation Publication 800-TD008F-EN-P - August 2025 55 Bulletin 800F 22.5 mm Push Buttons Legend Plates/Caps Two-color Molded Legend Caps — Non-illuminated Push Buttons Emergency Stop Legend Plates (5) 800F – AF 3 01 a b c a b c Button Cap Type Color Cap Legend Text (English) (1) (2) (1) White and yellow caps have black text. All other color caps have white text. (2) See Table 35 for valid color cap text codes. Code Description Code Description Code Description AF Flush 1 White 01 START AE Extended 2 Black 02 STOP 3 Green 05 O 4 Red 06 I 5 Yellow 08 → 6 Blue 09 FORWARD (3) (3) Available in flush only. 10 REVERSE (3) 11 R Table 35 - Valid Color Cap Text Codes Color Text Flush Caps Extended Caps White FORWARD, REVERSE, START, I, →, R →, R Black FORWARD, REVERSE, →, R STOP, O, →, R Green FORWARD, REVERSE, START, I, → → Red FORWARD, REVERSE, STOP, O, → STOP, O, → Yellow FORWARD, REVERSE, → → Blue FORWARD, REVERSE, →, R →, R 800F – 15YS a b a b b (continued) Size/Color (Yellow) Text Text Code Description Code Description Code Description 15Y 60 mm round (30.5 mm mounting hole) Blank No text W112 NØDSTOPP, EMERGENCY STOP (2) (2) Not available on 15YS version. E112 EMERGENCY STOP A112 NØDSTOP 15YS 60 mm round (22.5 mm mounting hole) (1) (1) Not for use with base-mounted contact blocks. F112 ARRÊT D’URGENCE (2) B112 EMERGENCY STOP, ARRÊT D’URGENCE, PARADA DE EMERGENCIA (2) S112 PARO DE EMERGENCIA 16Y 90 mm round (22.5 mm mounting hole) (1) G112 NOT HALT D112 NOODSTOP (2) T112 ARRESTO EMERGENZA M112 OT HALT, ARRESTO EMERGENZA, ARRÊT D’URGENCE (3) (3) Text is printed on the 15Y version only. N112 NÖDSTOPP, EMERGENCY STOP (2) P112 PARADA DE EMERGENCIA EMERGENCY STOP, ARRÊT D’URGENCE, NOT HALT (4) (4) Text is printed on the 15YS & 16Y versions only. (5) Sold only multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. L112 NEYÐARSTOPP, NEYÐARSTOPP (2) H112 NÖD-STOP, HÄTÄ-SEIS, NÖD-STOP (2) Cat. No. 800F-15YSE112 22.5 mm mounting hole 56 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 Bulletin 800F 22.5 mm Push Buttons Legend Plate Ordering Information (a) (b) (c) Standard Text/Symbols 1. Select the catalog number for the appropriate legend size and color from the selection tables on this page. 2. Complete the catalog number by adding the appropriate suffix number selected from page 59. Font size is automatically determined by the number of characters, as shown in the following table. Do not add the font code to the catalog number. Example: Catalog number 800F-11WE101 identifies a white, 30 x 40 mm snap-in legend plate and frame with AUTO engraved on it. Custom Text (d) 1. Select the catalog number for the appropriate legend size and color from the Selection Tables on this page. 2. Add E100 followed by the font code (K, S, L) from the following table. 3. Complete the catalog number by adding custom text to the order memo text or notes field. Example: Catalog number 800F-12WE100K, with STARTER text entered into memo text on order, identifies a white, 30 x 50 mm snap-in legend plate and frame with custom text STARTER engraved in small font. (a) Blank legend frames sold only in multiples of 10. Order (quantity of) 10 to receive one package of 10 pieces. Legends with standard text/symbols or custom text are packaged in quantities of 1. (b) Font code K = 0.08 in; font code S = 0.10 in; font code L = 0.14 in. (c) Use ProposalWorks™ software to configure the product. ProposalWorks software is available from rok.auto/systemtools. Font Size Number of Characters One-Piece Legend Plate Two-Piece Legend Plate Special Multi- Function Legend Plate K (small) >14 >13 >6 S (standard) ≤14 ≤13 ≤ 6 (d) Text found on page 61. Font Size Type of Legend Plate One-Piece Two-Piece Special Multi- Function Char. per Line, Max No. of Lines, Max Char. per Line, Max No. of Lines, Max Char. per Line, Max No. of Lines, Max 30 x 40 mm 30 x 50 mm 30 x 40 mm 30 x 50 mm or 30 x 60 mm K (small) 16 2 5 15 2 5 7 3 S (standard) 14 2 3 13 1 3 6 3 L (large) 10 1 3 9 1 3 4 2 Rockwell Automation Publication 800-TD008F-EN-P - August 2025 57 Bulletin 800F 22.5 mm Push Buttons Selection Tables 800F-34x 800F-40x 800F-20x 800F-12x 800F-11x Type (1) (1) Plate dimensions found on page 62. Description Cat. No. (Blank) Cat. No. (with Text Symbols) 30 x 40 mm 2-piece snapin plate and frame Red with white text 800F-11RE100 800F-11Rxxxx White with black text 800F-11WE100 800F-11Wxxxx Black with white text 800F-11BE100 800F-11Bxxxx Aluminum with black text 800F-11AE100 800F-11Axxxx 30 x 50 mm 2-piece snapin plate and frame White with black text 800F-12WE100 800F-12Wxxxx Black with white text 800F-12BE100 800F-12Bxxxx Aluminum with black text 800F-12AE100 800F-12Axxxx 30 x 60 mm 2-piece snapin plate and frame White with black text 800F-20WE100 800F-20Wxxxx Black with white text 800F-20BE100 800F-20Bxxxx Aluminum with black text 800F-20AE100 800F-20Axxxx Special multi- function 4-piece snap- in plates and frame White with black text 800F-40WE100 — Black with white text 800F-40BE100 — Aluminum with black text 800F-40AE100 — 30 x 40 mm 1-piece Red with white text 800F-34RE100 800F-34Rxxxx White with black text 800F-34WE100 800F-34Wxxxx Black with white text 800F-34BE100 800F-34Bxxxx Aluminum with black text 800F-34AE100 800F-34Axxxx 30 x 50 mm 1-piece Red with white text 800F-35RE100 800F-35Rxxxx White with black text 800F-35WE100 800F-35Wxxxx Black with white text 800F-35BE100 800F-35Bxxxx Aluminum with black text 800F-35AE100 800F-35Axxxx 30 x 40 mm snap-in plate only Red with white text 800F-17RE100 800F-17Rxxxx White with black text 800F-17WE100 800F-17Wxxxx Black with white text 800F-17BE100 800F-17Bxxxx Aluminum with black text 800F-17AE100 800F-17Axxxx 30 x 50 mm snap-in plate only White with black text 800F-18WE100 800F-18Wxxxx Black with white text 800F-18BE100 800F-18Bxxxx Aluminum with black