Advisory Circulars
FAA — Federal Aviation Administration · 379 documents.
- [Large AC] Evaluation of Flight Loads on Small Airlpanes with T, V, +, or Y Empennage Configurations9 ppAC 23-9
- Acceptable Methods, Techniques, and Practices - Aircraft Inspection and Repair [Large AC. This includes Change 1.]756 ppAC 43.13-1B
- Acceptance Guidance on Material Procurement and Process Specifications for Polymer Matrix Composite Systems25 ppAC 23-20
- Acceptance of Aeronautical Data Processes and Associated Databases36 ppAC 20-153B
- Aeroelastic Stability Substantiation of Transport Category Airplanes23 ppAC 25.629-1C
- Aeronautical Decision MakingAC 60-22
- Air Medical Resource Management17 ppAC 00-64
- Airborne Software Development Assurance Using EUROCAE ED-12( ) and RTCA DO-178( )15 ppAC 20-115D
- Airborne VHF Communication Equipment Installations1 ppAC 20-67B
- Aircraft Certification Service Voluntary Disclosure Reporting Program12 ppAC 00-68
- Aircraft Electrical and Electronic System Lightning Protection55 ppAC 20-136C
- Aircraft Electromagnetic Compatibility Certification3 ppAC 20-190
- Aircraft Ground Handling, Servicing, and Marshalling19 ppAC 00-34B
- Aircraft Ice Protection233 ppAC 20-73A
- Aircraft Onboard Weight and Balance Systems31 ppAC 20-161
- Aircraft Operations at Altitudes Above 25,000 Feet Mean Sea Level or Mach Numbers Greater Than .75/ with Change 152 ppAC 61-107B
- Aircraft Position and Anticollision Light Measurements45 ppAC 20-74
- Aircraft Position Light and Anticollision Light Installations13 ppAC 20-30B
- Aircraft Propeller Maintenance38 ppAC 20-37E
- Aircraft Tire Maintenance and Operational Practices with Change 112 ppAC 20-97B
- Airframe and Powerplant Mechanics Certification Guide65 ppAC 65-2D
- Airframe Guide for Certification of Part 23 Airplanes91 ppAC 23-19A
- Airline Transport Pilot Certification Training Program including Change 144 ppAC 61-138A
- Airplane Flight Manual42 ppAC 25.1581-1
- AIRPLANE FUEL EFFICIENCY CERTIFICATIONAC 38-1
- Airworthiness and Operational Approval of Digital Flight Data Recorder Systems with Change 159 ppAC 20-141B
- Airworthiness Approval for ADS-B In Systems and Applications49 ppAC 20-172B
- Airworthiness Approval for Aircraft Weather Radar Systems16 ppAC 20-182A
- Airworthiness Approval of Airborne Systems used for Takeoff, Precision Approach, Landing and Rollout in low-visibility conditions151 ppAC 20-191
- Airworthiness Approval of Attitude Heading Reference System (AHRS) Equipment11 ppAC 20-181
- Airworthiness Approval of Automatic Dependent Surveillance - Broadcast OUT Systems113 ppAC 20-165B
- Airworthiness Approval of Enhanced Vision System, Enhanced Flight Vision System, and Combined Vision System Equipment84 ppAC 20-167B
- Airworthiness Approval of Installed Radio Frequency Identification (RFID) Tags and Sensors7 ppAC 20-162B
- Airworthiness Approval of Positioning and Navigation Systems (Including Change 2)261 ppAC 20-138D
- Airworthiness Approval of Satellite Voice (SATVOICE) Equipment Supporting Air Traffic Service (ATS) Communication12 ppAC 20-150B
- Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II) and Mode S Transponders60 ppAC 20-131A
- Airworthiness Approval of Traffic Alert and Collision Avoidance Systems (TCAS II), Versions 7.0 & 7.1 and Associated Mode S Transponders94 ppAC 20-151C
- Airworthiness Certification of Civil Aircraft, Engine, Propellers, and Related Products Imported to the United States63 ppAC 21-23B
- Airworthiness Certification of U.S.-Produced Aircraft and Engine Kits Assembled Outside the United States4 ppAC 21-28
- Airworthiness Compliance Checklists for Common Part 23 Supplemental Type Certificate (STC) Projects68 ppAC 23-24
- Airworthiness Criteria for the Approval of Airborne Windshear Warning Systems in Transport Category14 ppAC 25-12
- Airworthiness Criteria for the Installation Approval of a Terrain Awareness and Warning System (TAWS) for Part 25 Airplanes32 ppAC 25-23
- Airworthiness Directives Management Process23 ppAC 39-9
- Alternative Methods of Compliance25 ppAC 39-10
- Alternatives to RTCA/DO-178B for Software in Airborne Systems and Equipment7 ppAC 20-171
- Altitude Reporting Equipment and Transponder System Maintenance and Inspection Practices22 ppAC 43-6D
- Anti-misfueling Devices: Their Availability and Use - Change 15 ppAC 20-122A
- Anticollision Light Maintenance (ACLM)6 ppAC 43-217
- Applicant’s Showing of Compliance and Certifying Statement of Compliance5 ppAC 21-51
- Application for Parts Manufacturer Approval Via Tests and Computations or Identicality32 ppAC 21.303-4
- Application for U.S. Airworthiness Certificate40 ppAC 21-12D
- Approval and Use of Fuel System Icing Inhibitors (FSII)15 ppAC 20-29C
- Approval of Flight Guidance Systems, Including Change 2123 ppAC 25.1329-1C
- Approval of Flight Management Systems in Transport Category Airplanes28 ppAC 25-15
- Approval of Manufacturer's Required Training Programs34 ppAC 61-137B
- Approval of Modified Seating System Initially Approved Under a Technical Standard Order12 ppAC 21-25B
- Approval of Propulsion Fuels, Additives, and Lubricating Oils36 ppAC 20-24D
- Approved Model List Supplemental Type Certificate (AML-STC)9 ppAC 20-180
- Autorotation Training9 ppAC 61-140A
- Auxiliary Fuel Systems for Reciprocating and Turbine Powered Part 23 Airplanes40 ppAC 23-10
- Auxiliary Fuel Systems Installations53 ppAC 25-8
- Aviation Databus Assurance10 ppAC 20-156
- Avionics Human Factors Considerations for Design and Evaluation6 ppAC 00-74
- Avoiding or Minimizing Encounters with Aircraft Equipped with Depleted Uranium Balance Weights during Accident Investigations2 ppAC 20-123
- BasicMed34 ppAC 68-1A
- Best Practices for Airborne Electronic Hardware Design Assurance Using EUROCAE ED-80( ) and RTCA DO-254( )18 ppAC 00-72
- Best Practices for Management of Open Problem Reports (OPRs)9 ppAC 00-71
- Bird Ingestion Certification Standards18 ppAC 33.76-1B
- Brakes and Braking Systems Certification Tests and Analysis15 ppAC 25.735-1
- Built-in Fire Extinguishing/Suppression Systems in Class C and Class F Cargo Compartments26 ppAC 25.851-1
- Cargo Compartment Fire Suppression6 ppAC 25.795-5
- Casting Factors14 ppAC 25.621-1
- Certification and Operation of Amateur-Built Aircraft60 ppAC 20-27G
- Certification Data Retention Agreements and Government Records6 ppAC 20-179
- Certification Guidance for Installation of Non-Essential, Non-Required Aircraft Cabin Systems & Equipment (CS&E)6 ppAC 20-168
- Certification Maintenance Requirements15 ppAC 25-19A
- Certification of a Repairman (Experimental Aircraft Builders)7 ppAC 65-23B
- Certification of a Repairman (General)7 ppAC 65-24
- Certification of Electrical Wiring Interconnection Systems on Transport Category Airplanes92 ppAC 25.1701-1
- Certification of Normal Category Rotorcraft (Changes 1 - 9 incorporated)1,196 ppAC 27-1B
- Certification of Propellers30 ppAC 35-1A
- Certification of Repairmen (Light-Sport)67 ppAC 65-32B
- Certification of Transport Airplane Mechanical Systems218 ppAC 25-22
- Certification of Transport Category Rotorcraft (Changes 1 - 9 incorporated)1,453 ppAC 29-2C
- Certification: Pilots and Flight and Ground Instructors60 ppAC 61-65K
- Chemical Oxygen Generator Security Standards8 ppAC 25.795-9
- Circuit protective devices13 ppAC 25.1357-1A
- Class B and F Cargo Compartments15 ppAC 25.857-1
- Cockpit Noise and Speech Interference Between Crewmember17 ppAC 20-133
- Commercial Parts15 ppAC 21-45
- Comparative Endurance Test Method to Show Durability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts8 ppAC 33.87-2
- Comparative Method to Show Equivalent Vibratory Stresses and High Cycle Fatigue Capability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts14 ppAC 33.83-1
- Compatibility of Changes to Type Design Installed on Aircraft7 ppAC 20-188
- Compliance Criteria for 14 CFR §33.28, Aircraft Engines, Electrical and Electronic Engine Control Systems47 ppAC 33.28-1
- Compliance of Transport Category Airplanes with Certification Requirements for Flight in Icing Conditions89 ppAC 25-28
- Complying with the Requirements of Importing Countries or Jurisdictions When Exporting U.S. Products, Articles, or Parts5 ppAC 21-2L
- Composite Aircraft Structure38 ppAC 20-107B
- Conspicuity of Aircraft Instrument Malfunction Indicators5 ppAC 20-69
- Continued Airworthiness Assessments of Powerplant and Auxiliary Power Unit Installations of Transport Category Airplanes99 ppAC 39-8
- Control of Prepositioned Products and Articles Shipped Prior to Design Approval7 ppAC 21-32C
- Control Systems—General29 ppAC 25.671-1
- Controls for Flight Deck Systems30 ppAC 20-175
- Conversion Process for Pilot Certificates in Accordance with the Implementation Procedures for Licensing as part of the Bilateral Aviation Safety Agreement Between the Federal Aviation Administration and Transport Canada Civil Aviation Authority for Pilot Licensing including Change 145 ppAC 61-135A
- Conversion Process for Pilot Certificates in Accordance with the Technical Implementation Procedures - Licensing as Part of the Bilateral Aviation Safety Agreement Between the FAA and EASA including Change 125 ppAC 61-143
- Correlation, Operation, Design, and Modification of Turbofan/Jet Engine Test Cells45 ppAC 43-207
- Corrosion Control for Aircraft127 ppAC 43-4B
- Currency Requirements and Guidance for the Flight Review and Instrument Proficiency Check48 ppAC 61-98E
- Damage Tolerance and Fatigue Evaluation of Structure41 ppAC 25.571-1D
- Damage Tolerance for High Energy Turbine Engine Rotors - Including Change 181 ppAC 33.14-1
- Damage Tolerance for Material Anomalies in Titanium Life-Limited Turbine Engine Rotors80 ppAC 33.70-3
- Damage Tolerance of Axial Blade Slot Features in High-Energy Turbine Engine Rotors82 ppAC 33.70-5
- Damage Tolerance of Hole Features in High-Energy Turbine48 ppAC 33.70-2
- Design and Installation Guidance for an Airborne System for Non-Required Telecommunication Service in Non Aeronautical Frequency Bands7 ppAC 20-177
- Design Considerations for Minimizing Hazards caused by Uncontained Turbine Engine and Auxiliary Power Unit Rotor Failure45 ppAC 20-128A
- Design Considerations to Protect Fuel Systems during a Wheels-Up Landing3 ppAC 25.994-1
- Design Dive Speed4 ppAC 25.335-1A
- Designing and Demonstrating Aircraft Tolerance to Portable Electronic Devices5 ppAC 20-164A
- Detecting and Reporting Suspected Unapproved Parts16 ppAC 21-29D
- Detonation Testing in Reciprocating Aircraft Engines6 ppAC 33.47-1
- Developing Data for Major Repairs of Turbine Engine Parts176 ppAC 33-9
- Development Assurance for Airborne Electronic Hardware31 ppAC 20-152A
- Development of a Nondestructive Inspection Program/Organization10 ppAC 25-29
- Development of Civil Aircraft and Systems3 ppAC 20-174
- Development of standard wiring practices documentation18 ppAC 25-26
- Development of Training/Qualification and Certification Programs for Composite Maintenance Technicians14 ppAC 65-33A
- Development of Transport Category Airplane Electrical Wiring Interconnection Systems Instructions for Continued Airworthiness Using and Enhanced Zonal Analysis Procedure98 ppAC 25-27A
- Displaying Geometric Altitude Relative to Mean Sea Level4 ppAC 20-163
- Dual Locking Devices on Fasteners4 ppAC 20-71
- Dynamic Evaluation of Seat Restraint Systems and Occupant Protection on Transport Airplanes / with Change 1108 ppAC 25.562-1B
- Dynamic Gust Loads24 ppAC 25.341-1
- Dynamic Testing of Part 23 Airplane Seat/Restraint Systems and Occupant Protection26 ppAC 23.562-1
- Electrical Appliances, Motors, and Transformers12 ppAC 25.1365-1
- Electrical bonding and protection against static electricity9 ppAC 25.899-1
- Electrical equipment and installations14 ppAC 25.1353-1A
- Electrical Fault and Fire Prevention and Protection12 ppAC 25-16
- Electrical Supplies for Emergency Conditions7 ppAC 25.1362-1
- Eligibility and Evaluation of U.S. Military Surplus Flight Safety Aircraft Parts, Engines, and Propellers20 ppAC 20-142
- Eligibility, Quality, & Identification of Aeronautical Replacement Parts14 ppAC 20-62E
- Emergency Evacuation Demonstrations25 ppAC 25.803-1A
- Engine and Turbosupercharger Rotor Overspeed Requirements of 14 CFR § 33.27.9 ppAC 33.27-1A
- Engine Failure Loads8 ppAC 25.362-1
- Engine Fire Protection § 33.1718 ppAC 33.17-1B
- Engine Fuel Systems12 ppAC 33.67-1
- Engine Overtorque Test, Calibration Test, Endurance Test, and Teardown Inspection for Turbine Engine Certification (§§ 33.84, 33.85, 33.87, 33.93)86 ppAC 33.87-1A
- Engine System and Component Tests10 ppAC 33.91-1
- Establishing the Certification Basis of Changed Aeronautical Products160 ppAC 21.101-1B
- Estimated Airplane Noise Levels in A-Weighted Decibels145 ppAC 36-3H
- Evaluating Turbine Engine Operating Characteristics11 ppAC 25.939-1
- Event Planning Guide9 ppAC 00-61
- Experimental Airworthiness Certification of Certain Former Military Aircraft18 ppAC 21-54
- Extended Operations (ETOPS) Eligibility for Turbine Engines15 ppAC 33.201-1
- Extending a Production Certificate to a Facility Located in a Bilateral Airworthiness Agreement Country6 ppAC 21-24A
- Exterior Colored Band around Exits on Transport Airplanes3 ppAC 20-47
- FAA Accepted Means of Compliance Process for 14 CFR Part 238 ppAC 23.2010-1
- FAA Approval of Electrical Firing Cartridge Components in an Aircraft Fire Extinguishing or Suppression System24 ppAC 20-144A
- FAA English Language Standard for an FAA Certificate Issued Under 14 CFR Parts 61, 63, 65, and 10711 ppAC 60-28B
- FAA Quality Control System Certification Program3 ppAC 00-41B
- FAA-Approved Aircraft Dispatcher Certification Courses including Change 129 ppAC 65-34A
- Fabrication of Aircraft parts by Maintenance Personnel20 ppAC 43-18
- Fatigue Life of Nickel Powder Rotating Life-Limited Parts15 ppAC 33.70-4
- Fatigue, Fail-Safe, and Damage Tolerance Evaluation of Metallic Structure for Normal, Utility, Acrobatic, and Commuter Category Airplanes76 ppAC 23-13A
- Fire Protection: Systems11 ppAC 25.869-1A
- Flammability Requirements for Aircraft Seat Cushions11 ppAC 25.853-1
- Flammability Testing of Aircraft Cabin Interior Panels After Alterations8 ppAC 20-178
- Flammability Tests11 ppAC 23-2A
- Flight Attendant Seat and Torso Restraint System Installations18 ppAC 25.785-1B
- Flight Deck Penetration Resistance13 ppAC 25.795-2A
- Flight Instructor Enhanced Qualification Training Program (FIEQTP)19 ppAC 61-145
- Flight Instructors as Certifying Officials for Student Pilot and Remote Pilot Applicants15 ppAC 61-141
- Flight Test Guide for Certification of Transport Category Airplanes Including Change 1495 ppAC 25-7D
- Flightcrew Alerting42 ppAC 25.1322-1
- Flightcrew Member Certificate Verification Plan5 ppAC 00-70
- FlightDeck Intrusion Resistance14 ppAC 25.795-1A
- Flightdeck Protection (Smoke and Fumes)4 ppAC 25.795-3
- Floor Proximity Emergency Escape Path Marking11 ppAC 25.812-1A
- Floor Proximity Emergency Escape Path Marking Systems Incorporating Photoluminescent Elements12 ppAC 25.812-2
- Fuel Drain Valves1 ppAC 20-119
- Fuel Tank Access Covers2 ppAC 25.963-1
- Fuel Tank Flammability76 ppAC 25.981-2A
- Fuel Tank Ignition Source Prevention Guidelines58 ppAC 25.981-1D
- Fuel Tank Strength in Emergency Landing Conditions13 ppAC 25-30
- Fuel Vent Fire Protection20 ppAC 25.975-1
- Fuel Venting and Exhaust Emission Requirements for Turbine Engine Powered Airplanes57 ppAC 34-1C
- Fuselage Doors and Hatches19 ppAC 25.783-1A
- Gaining Approval Of Seats With Integrated Electronic Components14 ppAC 21-49
- General Aviation Controlled Flight into Terrain Awareness21 ppAC 61-134
- General Guidelines for Measuring Fire-Extinguishing Agent Concentrations in Powerplant Compartments20 ppAC 20-100
- General Type Certification Guidelines for Turbine Engines10 ppAC 33-2C
- Geometry and Dimensional Considerations for Comparative Test and Analysis for Turbine Engine and Auxiliary Power Unit (APU) Replacement, and Repaired Parts28 ppAC 33-12
- Glass Fiber Fabric for Aircraft Covering4 ppAC 20-44
- Ground Gust Conditions4 ppAC 25.415-1
- Guidance for 30-Second and 2-Minute One-Engine-Inoperative (OEI) Ratings for Rotorcraft Turbine Engines18 ppAC 33-7A
- Guidance for Approved Model List (AML) Supplemental Type Certificated (STC) Approval of Part 23 Airplane Avionics Installations44 ppAC 23-22
- Guidance for Certification of Military and Special Mission Modifications and Equipment for Commercial Derivative Aircraft (CDA)25 ppAC 20-169
- Guidance for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts under Test and Computation161 ppAC 33-8
- Guidance Material for 14 CFR § 35.23, Propeller Control System34 ppAC 35.23-1
- Guidance Material for 14 CFR §33.19, Durability, for Reciprocating Engine Redesigned Parts19 ppAC 33.19-1
- Guidance Material For 14 CFR §33.28, Engine Control Systems81 ppAC 33.28-3
- Guidance Material for 14 CFR 33.28, Reciprocating Engine, Electrical and Electronic Engine Control Systems52 ppAC 33.28-2
- Guidance Material For 14 CFR 33.75, Safety Analysis (With Change 1)16 ppAC 33.75-1A
- Guidance Material for Aircraft Engine Life-Limited Parts Requirements25 ppAC 33.70-1
- Guidance on Testing and Installation of Rechargeable Lithium Battery and Battery Systems on Aircraft41 ppAC 20-184
- Guide for Developing a Receiving Inspection System for Aircraft Parts and Materials26 ppAC 20-154A
- Guidelines for Design Approval of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS)31 ppAC 20-140C
- Guidelines on the Marking of Aircraft15 ppAC 20-88A
- How to Prepare Reliability Assessment Plans for Aircraft Systems and Equipment9 ppAC 20-157
- Hydraulic System Certification Tests and Analysis7 ppAC 25.1435-1
- Identification and Registration Marking20 ppAC 45-2E
- Industry Documents To Support Aircraft Lightning Protection Certification3 ppAC 20-155A
- Initial Maintenance Inspection (IMI), 14 CFR 33.90, Test for Turbine Engines15 ppAC 33.90-1A
- Injury Criteria for Human Exposure to Impact13 ppAC 21-22
- Inspection, Prevention, Control, and Repair of Corrosion on Avionics Equipment Including Change 1235 ppAC 43-206
- Installation Guidance for Domestic Flight Information Service- Broadcast13 ppAC 20-149B
- Installation of Electronic Display in Part 23 Airplanes55 ppAC 23.1311-1C
- Installation of Electronic Flight Bag Components11 ppAC 20-173
- Installation of Physical Secondary Barriers for Transport Category Airplanes9 ppAC 25.795-10
- Installation of Terrain Awareness and Warning System (TAWS) Approved for Part 23 Airplanes31 ppAC 23-18
- Installation of Thermal/Acoustic Insulation for Burnthrough Protection35 ppAC 25.856-2A
- Installation of TSOA Articles and LODA Appliances4 ppAC 21-50
- Installation of Used Aircraft Engines in New Production Aircraft3 ppAC 21-19B
- Installation, Inspection, and Maintenance of Controls for General Aviation Reciprocating Aircraft Engines22 ppAC 20-143
- Installation, Removal or Change of Identification Data and Identification Plates on Aircraft Engines4 ppAC 45-3A
- Installed Systems and Equipment for Use by the Flightcrew62 ppAC 25.1302-1
- Institution of Higher Education’s Application for Authority to Certify its Graduates for an Airline Transport Pilot Certificate with Reduced Aeronautical Experience22 ppAC 61-139
- Instructions for Completion of FAA Form 33711 ppAC 43.9-1G
- Instructions for Continued Airworthiness12 ppAC 33.4-1
- Instructions for Continued airworthiness of Structural Repairs on Transport Airplanes7 ppAC 25.1529-1A
- Instructions for Continued Airworthiness, Aircraft Engine High Intensity Radiated Fields (HIRF) and Lightning Protection Features - Including Change 121 ppAC 33.4-3
- Instructions for Continued Airworthiness: In-Service Inspection of Safety Critical Turbine Engine Parts at Piece-Part Opportunity9 ppAC 33.4-2
- Integrated Modular Avionics Development. Verification, Integration and Approval using RTCA/DO-297 and Technical Standard Order C15366 ppAC 20-170
- Integrating Helicopter and Tiltrotor Assets into Disaster Relief Planning82 ppAC 00-59
- Interior Design to Facillitate Searches7 ppAC 25.795-8
- Issuance of Export Airworthiness Approvals Under 14 CFR Part 21 Subpart L10 ppAC 21-44A
- Issuance of Type Certificate: Restricted Category Agricultural Airplanes9 ppAC 21.25-1
- Issuance Process for Pilot Certificates in Accordance with the Implementation Procedures for Licensing as Part of the Bilateral Aviation Safety Agreement Between the FAA and the Swiss FOCA25 ppAC 61-144
- Issue Paper Process23 ppAC 20-166A
- JIG Fixtures; Replacement of Wing Attach Angles and Doublers on Douglas DC-3 Series Aircraft, Airworthiness Directive 66-18-23 ppAC 39-1A
- Landing Performance Data for Time-of-Arrival Landing Performance Assessments24 ppAC 25-32
- Laser Airworthiness Installation Guidance22 ppAC 20-183
- Least Risk Bomb Location6 ppAC 25.795-6
- Maintenance of Emergency Evacuations Systems for Aircraft Operating Under Part 1219 ppAC 43-208
- Maintenance Records and FAA Form 8130-3 Return to Service24 ppAC 43-9D
- Management of Open Problem Reports (OPRs)10 ppAC 20-189
- Manufacturers Reporting Failures, Malfunctions, or Defects4 ppAC 21-9B
- Manufacturing Process of Premium Quality Titanium Alloy Rotating Engine Components48 ppAC 33.15-1A
- Manufacturing Processes for Premium Quality Nickel Alloy for Engine Rotating Parts17 ppAC 33.15-2
- Marking Aircraft Fuel Filler Openings with Color Coded Decals2 ppAC 20-116
- Marking of TSO-C72b Individual Flotation Devices1 ppAC 20-56A
- Material Strength Properties and Material Design Values4 ppAC 25.613-1
- Means of Compliance with Title 14 CFR, Part 23, § 23.629, Flutter32 ppAC 23.629-1B
- Methodology for Dynamic Seat Certification by Analysis for Use in Parts 23, 25, 27, and 29 Airplanes and Rotorcraft43 ppAC 20-146A
- Minimizing the Hazards from Propeller Blade and Hub Failures7 ppAC 25.905-1
- Minimum Barometry for Calibration and Test of Atmospheric Pressure Instruments6 ppAC 43-2B
- Minimum Flight Crew32 ppAC 23-1523
- Minimum Flightcrew8 ppAC 25.1523-1
- Nationally Scheduled, FAA-Approved, Industry-Conducted Flight Instructor Refresher Course58 ppAC 61-83K
- Noise Standards: Aircraft Type and Airworthiness Certification277 ppAC 36-4D
- Nondirectional Beacon Frequency Congestion2 ppAC 20-120
- North American Free Trade Agreement and Specialty Air Services Operations23 ppAC 00-60B
- Obtaining Foreign Design Approval / Acceptance of U.S. Products and Articles15 ppAC 21-52
- Onboard Recording of Controller Pilot Data Link Communication (CPDLC) In Crash Survivable Memory7 ppAC 20-160A
- Operational Authorization of Integrated Aircraft Health Management System13 ppAC 43-218
- Overview of the Aviation Maintenance Profession with Change 136 ppAC 65-30B
- Oxidation, Hot Corrosion, Thermal Fatigue, and Erosion Characteristics Testing to Support 14 CFR, Part 33, § 33.15, Compliancefor Turbine Engines8 ppAC 33-11
- Part 26, Continued airworthiness and Safety Improvements24 ppAC 26-1
- Parts and Materials Substitution for Vintage Aircraft18 ppAC 23-27
- Parts Marking Identification - Including Change 16 ppAC 43-213A
- Passenger Cabin Smoke Protection11 ppAC 25.795-4
- Performance and Handling Characteristics in Icing Conditions72 ppAC 25-25A
- Pilot Certification and Operations for Sport Pilots, Flight Instructors with a Sport Pilot Rating, and Simplified Flight Controls26 ppAC 61-146
- Pilot Compartment View Design Considerations6 ppAC 25.773-1
- Pilot Precautions and Procedures to be taken in Preventing Aircraft Reciprocating Engine Induction System and Fuel System Icing Problems6 ppAC 20-113
- Placards for Battery-Excited Alternators Installed in Light Aircraft1 ppAC 20-40
- Powder Bed Fusion Additive Manufacturing Process for Aircraft Engine Parts24 ppAC 33.15-3
- Powerplant Guide for Certification of Part 23 Airplanes and Airships199 ppAC 23-16A
- Powerplant Installation and Propulsion System Component Fire Protection Test Methods, Standards, and Criteria9 ppAC 20-135A
- Pressurization, Ventilation and Oxygen Systems Assessment for Subsonic Flight including High Altitude Operation12 ppAC 25-20
- Preventive Maintenance5 ppAC 43-12A
- Primary Category Aircraft13 ppAC 21-37
- Process to Support FAA Findings of Undue Burden or No Undue Burden for PAHs Requesting to Use a Manufacturing Facility Located Outside of the United States16 ppAC 21-55
- Production Under 14 CFR Part 21,Subparts F, G, K, and O66 ppAC 21-43A
- Proof of Structure10 ppAC 25.307-1
- Propeller Critical Parts6 ppAC 35.16-1
- Propeller Fatigue Limits and Evaluation25 ppAC 35.37-1B
- Propeller Instructions for Continued Airworthiness11 ppAC 35.4-1
- Propeller Vibration and Fatigue42 ppAC 20-66B
- Protection Against Injury9 ppAC 25.1360-1
- Protection of Aircraft Fuel Systems Against Vapor Ignition Caused by Lightning9 ppAC 20-53C
- Public Aircraft Operations—Manned and Unmanned20 ppAC 00-1.1B
- Qualification Testing of Turbojet and Turbofan Engine Thrust Reversers7 ppAC 20-18B
- Quality Control for the Manufacature of Non-Metallic Compartment Interior Components8 ppAC 21-31A
- Quality Control for the Manufacture of Composite Structures15 ppAC 21-26A
- Ratings and Operating Limitations for Turbine Engines (Sections 33.7 and 33.8)21 ppAC 33.7-1
- Reciprocating Engine Overhaul Terminology and Standards - Including Change 16 ppAC 43-11
- Reciprocating Engine Power-Loss Accident Prevention and Trend Monitoring16 ppAC 20-105C
- Recommended Alternative Inspection Schedule for Daher (Socata) TBM Series Aircraft4 ppAC 43-211A
- Recommended Guidelines for Instrument Shops4 ppAC 43-15
- Recommended Inspection Procedures for Former Military Aircraft12 ppAC 43-209A
- Recommended Radiation Safety Precautions for Ground Operation of Airborne Weather Radar6 ppAC 20-68B
- Reduced and Derated Takeoff Thrust (Power) Procedures4 ppAC 25-13
- Repairs and Alterations to Composite and Bonded Aircraft Structure24 ppAC 43-214A
- Replacing MIL-S-8879C With SAE AS88792 ppAC 21-41A
- Reusable Software Components30 ppAC 20-148
- Revised Powerplant Engineering Report No. 3A Standard Fire Test Apparatus and Procedure (for Flexible Hose Assemblies)1 ppAC 20-104
- RTCA Document DO-160 versions D, E and F, “Environmental Conditions and Test Procedures for Airborne Equipment”16 ppAC 21-16G
- Rudder Control Reversal Conditions7 ppAC 25.353-1
- Safety Assessment of Powerplant Installations26 ppAC 25.901-1
- Safety Management Systems for Part 21 Type and Production Certificate Holders62 ppAC 21-58
- Safetying of Turnbuckles on Civil Aircraft1 ppAC 20-45
- Selection of Cyclic Redundancy Code and Checksum Algorithms to Ensure Critical Data Integrity5 ppAC 00-66
- Self-Locking Nuts on Bolts Subject to Rotation2 ppAC 23.607-1
- Service Bulletins Related to Airworthiness Directives and Indicating FAA Approval on Service Documents39 ppAC 20-176A
- Service Difficulty Reporting System (Air Operator/Air Agency/General Aviation/Unmanned Aircraft Systems)12 ppAC 20-109B
- Sharing Aircraft Operating Expenses in Accordance with 14 CFR § 61.113 (c)13 ppAC 61-142
- Shoulder Harness-Safety Belt Installations47 ppAC 21-34
- Small Airplane Certification Compliance Program with Change 139 ppAC 23-15A
- Smoke Detection, Penetration, and Evacuation Tests and Related Flight Manual Emergency Procedures28 ppAC 25-9A
- Software Management During Aircraft Maintenance9 ppAC 43-216A
- Special Flight Permits for Operation of Overweight Aircraft8 ppAC 21-4B
- Stall and Spin Awareness Training with Change 1 & 223 ppAC 61-67C
- Standard Airworthiness Certification of Surplus Military Aircraft and Aircraft Built from Spare and Surplus Parts5 ppAC 21-13
- Standardized Procedures for Obtaining Approval of Data Used in the Performance of Major Repairs and Major Alterations37 ppAC 43-210A
- Standardized Procedures for Performing Aircraft Magnetic Compass Calibration11 ppAC 43-215
- Status of Federal Aviation Regulations6 ppAC 00-44II
- Submittal Of Data To An ACO, A DER Or An ODA For A Major Repair Or Major Alteration13 ppAC 21-47
- Substitute Technical Standard Order (TSO) Aircraft Equipment2 ppAC 20-41A
- Survivability of Systems5 ppAC 25.795-7
- Sustained Engine Imbalance13 ppAC 25-24
- System Design and Analysis75 ppAC 25.1309-1B
- System Safety Analysis and Assessment for Part 23 Airplanes56 ppAC 23.1309-1E
- Systems and Equipment Guide for Certification of Part 23 Airplanes and Airships370 ppAC 23-17C
- Takeoff Configuration Warning Systems6 ppAC 25.703-1
- Takeoff Performance Data for Operations on Contaminated Runways15 ppAC 25-31
- Taxi, Takeoff and Landing Roll Design Loads13 ppAC 25.491-1
- Technical Information Regarding Civil Aeronautics Manuals 1, 3, 4a, 4b, 5, 6, 7, 8, 9, 13, and 141 ppAC 20-33B
- Technical Standard Order Program57 ppAC 21-46A
- Test Procedures for Maximum Allowable Airspeed Indicators2 ppAC 20-134
- The Certification of Aircraft Electrical and Electronic Systems for Operation in the High-Intensity Radiated Fields (HIRF) Environment61 ppAC 20-158B
- The title is Best Practices for Airborne Software Development Assurance Using EUROCAE ED-12( ) and RTCA DO-178( )6 ppAC 00-69
- Thermal/Acoustic Insulation Flame Propagation Test Method Details13 ppAC 25.856-1
- Towbar and Towbarless Movement of Aircraft16 ppAC 00-65A
- Training, Qualification, and Certification of Nondestructive Inspection Personnel13 ppAC 65-31B
- Transport Airplane Cabin Interiors Crashworthiness Handbook893 ppAC 25-17A
- Transport Airplane Fuel System Lightning Protection37 ppAC 25.954-1
- Transport Airplane Landing Gear Retracting Mechanism7 ppAC 25.729-1
- Transport Category Airplanes Modified for Cargo Service8 ppAC 25-18
- Turbine Engine and Airframe Sensor Icing Compliance21 ppAC 20-197
- Turbine Engine Continued Rotation and Rotor Locking9 ppAC 33.74/92-1B
- Turbine Engine Power-Loss and Instability in Extreme Conditions of Rain and Hail19 ppAC 33.78-1
- Turbine Engine Rotor Blade Containment/Durability5 ppAC 33-5
- Turbine Engine Vibration15 ppAC 33.63-1
- Turbine Engine Vibration Test12 ppAC 33.83-2B
- Turbojet, Turboprop, Turboshaft, and Turbofan Engine Induction System Icing and Ice Ingestion54 ppAC 20-147A
- Type Certification Basis for Conversion from Reciprocating Engine to Turbine-Powered Part 23 Airplanes8 ppAC 23-14
- Type Certification of Automobile Gasoline in Part 23 Airplanes with Reciprocating Engines11 ppAC 23.1521-1B
- Type Certification of Oxygenates and Oxygenated Gasoline Fuels in Part 23 Airplanes with Reciprocating Engines17 ppAC 23.1521-2
- Type Certification of Very Light Airplanes Under FAR 21.17(b)14 ppAC 21.17-3
- Type Certification----Powered-lift64 ppAC 21.17-4
- Type Certification-Airships6 ppAC 21.17-1A
- Type Certification-Fixed Wing Gliders (Sailplanes), Including Powered Gliders7 ppAC 21.17-2A
- U.S. Agents for Service on Individuals with Foreign Addresses Who Hold or Apply for Certain Certificates, Ratings, or Authorizations9 ppAC 3-1
- Uniform Distribution of Exits17 ppAC 25.807-1
- United States (U.S.) National Aviation Standard for the Very High Frequency Omnidirectional Radio Range (VOR)/Distance Measuring Equipment (DME)/Tactical Air Navigation (TACAN) Systems67 ppAC 00-31A
- United States—Canadian Bilateral Aviation Safety Agreement Maintenance Implementation Procedures19 ppAC 43-10C
- Unwanted In-Flight Thrust Reversal of Turbojet Thrust Reversers35 ppAC 25.933-1
- Use of Automobile Gasoline in Agricultural Aircraft3 ppAC 21-21
- Use of Manufacturers’ Maintenance Manuals5 ppAC 20-77B
- Use of Multi-Core Processors18 ppAC 20-193
- Use of Society of Automotive Engineers (SAE) Class H11 Bolts2 ppAC 20-127
- Using Electronic Modeling Systems as Primary Type Design Data6 ppAC 21-48
- Voluntary Disclosure Reporting Program22 ppAC 00-58C
- Voluntary Industry Distributor Accreditation Program with Change 116 ppAC 00-56B
- Waste Water/Potable Water Drain System Certification Testing3 ppAC 25.1455-1
- Water in Aviation Fuels8 ppAC 20-125
- Water Ingestion Testing for Turbine Powered Airplanes5 ppAC 20-124
- Weld Repair of Aluminum Crankcases and Cylinders of Piston Engines - Including Change 112 ppAC 33-6
- William (Bill) O’Brien Aviation Maintenance Technician Awards Program7 ppAC 65-25F
- Windows and Windshields10 ppAC 25.775-1
- WINGS—Pilot Proficiency Program8 ppAC 61-91K